Добрый день.
Кто имеет опыт подключения сканера к терминалу не могли бы вы поподробнее описать всю процедуру подключения, тонкости и подводные камни.
Все делаю как указано на сайте SANE.
Имею лог, относящийся к сканеру:
saned started, PID 84.
SYSLOG: <31>Jan 1 00:04:03 saned[84]: saned from sane-backends 1.0.18 ready
SYSLOG: <31>Jan 1 00:04:03 saned[84]: check_host: access by remote host: 198.162.100.1
SYSLOG: <31>Jan 1 00:04:03 saned[84]: init: access granted to PCUSER@198.162.100.1
и зависший терминал.
Заранее спасибо.
wtware и сканер
-
aka
- Разработчик
- Сообщения: 11849
- Зарегистрирован: Ср окт 01, 2003 12:06 am
- Откуда: Роcсия, Тольятти
- Контактная информация:
Re: wtware и сканер
Можно целиком лог?
Re: wtware и сканер
Лог целиком
+--- FILE "/tmp/all.log" -----------------------
| WTware PRO 4.4.13 supervisor.
| KERNEL: Linux version 2.4.36 (root@compiler) (gcc version 3.4.6) #72 Tue Jul 22 13:12:44 MDT 2008
| KERNEL: BIOS-provided physical RAM map:
| KERNEL: BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
| KERNEL: BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
| KERNEL: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
| KERNEL: BIOS-e820: 0000000000100000 - 000000003bee0000 (usable)
| KERNEL: BIOS-e820: 000000003bee0000 - 000000003bee3000 (ACPI NVS)
| KERNEL: BIOS-e820: 000000003bee3000 - 000000003bef0000 (ACPI data)
| KERNEL: BIOS-e820: 000000003bef0000 - 000000003bf00000 (reserved)
| KERNEL: BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
| KERNEL: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
| KERNEL: BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
| KERNEL: Warning only 896MB will be used.
| KERNEL: Use a HIGHMEM enabled kernel.
| KERNEL: 896MB LOWMEM available.
| KERNEL: found SMP MP-table at 000f34b0
| KERNEL: hm, page 000f3000 reserved twice.
| KERNEL: hm, page 000f4000 reserved twice.
| KERNEL: hm, page 000f1000 reserved twice.
| KERNEL: hm, page 000f2000 reserved twice.
| KERNEL: On node 0 totalpages: 229376
| KERNEL: zone(0): 4096 pages.
| KERNEL: zone(1): 225280 pages.
| KERNEL: zone(2): 0 pages.
| KERNEL: ACPI: RSDP (v000 CN700 ) @ 0x000f7610
| KERNEL: ACPI: RSDT (v001 CN700 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3bee3040
| KERNEL: ACPI: FADT (v001 CN700 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3bee30c0
| KERNEL: ACPI: MADT (v001 CN700 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3bee78c0
| KERNEL: ACPI: DSDT (v001 CN700 AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
| KERNEL: ACPI: Local APIC address 0xfee00000
| KERNEL: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
| KERNEL: Processor #0 Pentium(tm) Pro APIC version 20
| KERNEL: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
| KERNEL: ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
| KERNEL: IOAPIC[0]: Assigned apic_id 2
| KERNEL: IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, IRQ 0-23
| KERNEL: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
| KERNEL: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
| KERNEL: Using ACPI (MADT) for SMP configuration information
| KERNEL: Kernel command line: root=/dev/ram/0 ramdisk_blocksize=4096 ramdisk_size=8192 quiet initrd=wtshell/wtshell BOOT_IMAGE=wtshell/bzImage
| KERNEL: Initializing CPU#0
| KERNEL: Detected 1000.011 MHz processor.
| KERNEL: Console: colour VGA+ 80x25
| KERNEL: Calibrating delay loop... 1992.29 BogoMIPS
| KERNEL: Memory: 903648k/917504k available (1038k kernel code, 13468k reserved, 520k data, 108k init, 0k highmem)
| KERNEL: Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
| KERNEL: Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
| KERNEL: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
| KERNEL: Buffer cache hash table entries: 65536 (order: 6, 262144 bytes)
| KERNEL: Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
| KERNEL: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
| KERNEL: CPU: L2 Cache: 128K (64 bytes/line)
| KERNEL: CPU: After generic, caps: 27c9bbff 00100000 00000000 00000000
| KERNEL: CPU: Common caps: 27c9bbff 00100000 00000000 00000000
| KERNEL: CPU: Centaur VIA Esther processor 1000MHz stepping 09
| KERNEL: Enabling fast FPU save and restore... done.
| KERNEL: Enabling unmasked SIMD FPU exception support... done.
| KERNEL: Checking 'hlt' instruction... OK.
| KERNEL: POSIX conformance testing by UNIFIX
| KERNEL: enabled ExtINT on CPU#0
| KERNEL: ESR value before enabling vector: 00000000
| KERNEL: ESR value after enabling vector: 00000000
| KERNEL: ENABLING IO-APIC IRQs
| KERNEL: init IO_APIC IRQs
| KERNEL: IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
| KERNEL: ..TIMER: vector=0x31 pin1=2 pin2=-1
| KERNEL: Using local APIC timer interrupts.
| KERNEL: calibrating APIC timer ...
| KERNEL: ..... CPU clock speed is 1000.0317 MHz.
| KERNEL: ..... host bus clock speed is 100.0030 MHz.
| KERNEL: cpu: 0, clocks: 1000030, slice: 500015
| KERNEL: CPU0<T0:1000016,T1:500000,D:1,S:500015,C:1000030>
| KERNEL: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
| KERNEL: mtrr: detected mtrr type: Intel
| KERNEL: ACPI: Subsystem revision 20040326
| KERNEL: PCI: PCI BIOS revision 2.10 entry at 0xf9330, last bus=1
| KERNEL: PCI: Using configuration type 1
| KERNEL: ACPI: Interpreter enabled
| KERNEL: ACPI: Using IOAPIC for interrupt routing
| KERNEL: ACPI: System [ACPI] (supports S0 S1 S4 S5)
| KERNEL: ACPI: PCI Root Bridge [PCI0] (00:00)
| KERNEL: PCI: Probing PCI hardware (bus 00)
| KERNEL: PCI: Via IRQ fixup
| KERNEL: PCI: Via IRQ fixup
| KERNEL: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
| KERNEL: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
| KERNEL: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5
| KERNEL: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12)
| KERNEL: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
| KERNEL: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
| KERNEL: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
| KERNEL: ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
| KERNEL: ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
| KERNEL: ACPI: PCI Interrupt Link [ALKA] (IRQs *20), disabled.
| KERNEL: ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
| KERNEL: ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
| KERNEL: ACPI: PCI Interrupt Link [ALKD] (IRQs *23), disabled.
| KERNEL: PCI: Probing PCI hardware
| KERNEL: 00:00:05[A] -> 2-17 -> IRQ 17 level low
| KERNEL: 00:00:05 -> 2-19 -> IRQ 19 level low
| KERNEL: 00:00:05[C] -> 2-18 -> IRQ 18 level low
| KERNEL: 00:00:05[D] -> 2-16 -> IRQ 16 level low
| KERNEL: ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
| KERNEL: 00:00:10[A] -> 2-21 -> IRQ 21 level low
| KERNEL: ACPI: PCI Interrupt Link [ALKA] disabled and referenced, BIOS bug.
| KERNEL: ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
| KERNEL: 00:00:11[A] -> 2-20 -> IRQ 20 level low
| KERNEL: ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
| KERNEL: 00:00:11[C] -> 2-22 -> IRQ 22 level low
| KERNEL: ACPI: PCI Interrupt Link [ALKD] disabled and referenced, BIOS bug.
| KERNEL: ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
| KERNEL: 00:00:11[D] -> 2-23 -> IRQ 23 level low
| KERNEL: number of MP IRQ sources: 15.
| KERNEL: number of IO-APIC #2 registers: 24.
| KERNEL: testing the IO APIC.......................
| KERNEL:
| KERNEL: IO APIC #2......
| KERNEL: .... register #00: 02000000
| KERNEL: ....... : physical APIC id: 02
| KERNEL: ....... : Delivery Type: 0
| KERNEL: ....... : LTS : 0
| KERNEL: .... register #01: 00178003
| KERNEL: ....... : max redirection entries: 0017
| KERNEL: ....... : PRQ implemented: 1
| KERNEL: ....... : IO APIC version: 0003
| KERNEL: .... IRQ redirection table:
| KERNEL: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
| KERNEL: 00 000 00 1 0 0 0 0 0 0 00
| KERNEL: 01 001 01 0 0 0 0 0 1 1 39
| KERNEL: 02 001 01 0 0 0 0 0 1 1 31
| KERNEL: 03 001 01 0 0 0 0 0 1 1 41
| KERNEL: 04 001 01 0 0 0 0 0 1 1 49
| KERNEL: 05 001 01 0 0 0 0 0 1 1 51
| KERNEL: 06 001 01 0 0 0 0 0 1 1 59
| KERNEL: 07 001 01 0 0 0 0 0 1 1 61
| KERNEL: 08 001 01 0 0 0 0 0 1 1 69
| KERNEL: 09 001 01 0 1 0 1 0 1 1 71
| KERNEL: 0a 001 01 0 0 0 0 0 1 1 79
| KERNEL: 0b 001 01 0 0 0 0 0 1 1 81
| KERNEL: 0c 001 01 0 0 0 0 0 1 1 89
| KERNEL: 0d 001 01 0 0 0 0 0 1 1 91
| KERNEL: 0e 001 01 0 0 0 0 0 1 1 99
| KERNEL: 0f 001 01 0 0 0 0 0 1 1 A1
| KERNEL: 10 001 01 1 1 0 1 0 1 1 C1
| KERNEL: 11 001 01 1 1 0 1 0 1 1 A9
| KERNEL: 12 001 01 1 1 0 1 0 1 1 B9
| KERNEL: 13 001 01 1 1 0 1 0 1 1 B1
| KERNEL: 14 001 01 1 1 0 1 0 1 1 D1
| KERNEL: 15 001 01 1 1 0 1 0 1 1 C9
| KERNEL: 16 001 01 1 1 0 1 0 1 1 D9
| KERNEL: 17 001 01 1 1 0 1 0 1 1 E1
| KERNEL: IRQ to pin mappings:
| KERNEL: IRQ0 -> 0:2
| KERNEL: IRQ1 -> 0:1
| KERNEL: IRQ3 -> 0:3
| KERNEL: IRQ4 -> 0:4
| KERNEL: IRQ5 -> 0:5
| KERNEL: IRQ6 -> 0:6
| KERNEL: IRQ7 -> 0:7
| KERNEL: IRQ8 -> 0:8
| KERNEL: IRQ9 -> 0:9
| KERNEL: IRQ10 -> 0:10
| KERNEL: IRQ11 -> 0:11
| KERNEL: IRQ12 -> 0:12
| KERNEL: IRQ13 -> 0:13
| KERNEL: IRQ14 -> 0:14
| KERNEL: IRQ15 -> 0:15
| KERNEL: IRQ16 -> 0:16
| KERNEL: IRQ17 -> 0:17
| KERNEL: IRQ18 -> 0:18
| KERNEL: IRQ19 -> 0:19
| KERNEL: IRQ20 -> 0:20
| KERNEL: IRQ21 -> 0:21
| KERNEL: IRQ22 -> 0:22
| KERNEL: IRQ23 -> 0:23
| KERNEL: .................................... done.
| KERNEL: PCI: Using ACPI for IRQ routing
| KERNEL: isapnp: Scanning for PnP cards...
| KERNEL: isapnp: No Plug & Play device found
| KERNEL: Linux NET4.0 for Linux 2.4
| KERNEL: Based upon Swansea University Computer Society NET3.039
| KERNEL: Initializing RT netlink socket
| KERNEL: Starting kswapd
| KERNEL: devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
| KERNEL: devfs: boot_options: 0x1
| KERNEL: ACPI: Power Button (FF) [PWRF]
| KERNEL: ACPI: Sleep Button (CM) [SLPB]
| KERNEL: ACPI: Processor [CPU0] (supports C1)
| KERNEL: RAMDISK driver initialized: 16 RAM disks of 8192K size 4096 blocksize
| KERNEL: Initializing Cryptographic API
| KERNEL: NET4: Linux TCP/IP 1.0 for NET4.0
| KERNEL: IP Protocols: ICMP, UDP, TCP
| KERNEL: IP: routing cache hash table of 8192 buckets, 64Kbytes
| KERNEL: TCP: Hash tables configured (established 262144 bind 65536)
| KERNEL: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
| KERNEL: RAMDISK: cramfs filesystem found at block 0
| KERNEL: RAMDISK: Loading 1660 blocks [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\done.
| KERNEL: Freeing initrd memory: 1660k freed
| KERNEL: VFS: Mounted root (cramfs filesystem) readonly.
| KERNEL: Mounted devfs on /dev
| KERNEL: Freeing unused kernel memory: 108k freed
| pfac: Ok, PID 10.
| initrd: WTware PRO shell, v.4.4.13
| initrd: Kernel command line: root=/dev/ram/0 ramdisk_blocksize=4096 ramdisk_size=8192 quiet initrd=wtshell/wtshell BOOT_IMAGE=wtshell/bzImage
| .
| initrd: Ethernet boot.
| initrd: Kernel: 2.4.36, modules in /lib/modules/2.4.36.
| initrd: PCIID: 1106:0314 sub 1458:5000, class 0x0600.
| initrd: PCIID: 1106:1314 sub 0000:0000, class 0x0600.
| initrd: PCIID: 1106:2314 sub 0000:0000, class 0x0600.
| initrd: PCIID: 1106:3208 sub 0000:0000, class 0x0600.
| initrd: PCIID: 1106:4314 sub 0000:0000, class 0x0600.
| initrd: PCIID: 1106:7314 sub 0000:0000, class 0x0600.
| initrd: PCIID: 1106:b198 sub 0000:0000, class 0x0604.
| initrd: PCIID: 10ec:8139 sub 1458:e000, class 0x0200.
| initrd: PCIID: 1106:0571 sub 1458:5002, class 0x0101.
| initrd: PCIID: 1106:3038 sub 1458:5004, class 0x0c03.
| initrd: PCIID: 1106:3038 sub 1458:5004, class 0x0c03.
| initrd: PCIID: 1106:3038 sub 1458:5004, class 0x0c03.
| initrd: PCIID: 1106:3038 sub 1458:5004, class 0x0c03.
| initrd: PCIID: 1106:3104 sub 1458:5004, class 0x0c03.
| initrd: PCIID: 1106:3227 sub 1458:5001, class 0x0601.
| initrd: PCIID: 1106:3059 sub 1458:fa30, class 0x0401.
| initrd: PCIID: 1106:3344 sub 1458:d000, class 0x0300.
| initrd: PCIID, network: 10ec:8139.
| initrd: PCIID, VGA: 1106:3344.
| initrd: PCIID, sound: 1106:3059.
| +--- FILE "/proc/pci" -----------------------
| | PCI devices found:
| | Bus 0, device 0, function 0, WTCODE 0600 1106 0314 1458 5000
| | Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge (rev 0).
| | Master Capable. Latency=8.
| | Prefetchable 32 bit memory at 0xe8000000 [0xefffffff].
| | Bus 0, device 0, function 1, WTCODE 0600 1106 1314 0000 0000
| | Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge (rev 0).
| | Bus 0, device 0, function 2, WTCODE 0600 1106 2314 0000 0000
| | Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge (rev 0).
| | Bus 0, device 0, function 3, WTCODE 0600 1106 3208 0000 0000
| | Host bridge: VIA Technologies, Inc. PT890 Host Bridge (rev 0).
| | Bus 0, device 0, function 4, WTCODE 0600 1106 4314 0000 0000
| | Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge (rev 0).
| | Bus 0, device 0, function 7, WTCODE 0600 1106 7314 0000 0000
| | Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge (rev 0).
| | Bus 0, device 1, function 0, WTCODE 0604 1106 b198 0000 0000
| | PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge (rev 0).
| | Master Capable. No bursts. Min Gnt=10.
| | Bus 0, device 7, function 0, WTCODE 0200 10ec 8139 1458 e000
| | Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 16).
| | IRQ 18.
| | Master Capable. Latency=32. Min Gnt=32.Max Lat=64.
| | I/O at 0xe000 [0xe0ff].
| | Non-prefetchable 32 bit memory at 0xf6000000 [0xf60000ff].
| | Bus 0, device 15, function 0, WTCODE 0101 1106 0571 1458 5002
| | IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 6).
| | IRQ 20.
| | Master Capable. Latency=32.
| | I/O at 0xec00 [0xec0f].
| | Bus 0, device 16, function 0, WTCODE 0c03 1106 3038 1458 5004
| | USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 129).
| | IRQ 21.
| | Master Capable. Latency=32.
| | I/O at 0xe800 [0xe81f].
| | Bus 0, device 16, function 1, WTCODE 0c03 1106 3038 1458 5004
| | USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2) (rev 129).
| | IRQ 21.
| | Master Capable. Latency=32.
| | I/O at 0xe900 [0xe91f].
| | Bus 0, device 16, function 2, WTCODE 0c03 1106 3038 1458 5004
| | USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3) (rev 129).
| | IRQ 21.
| | Master Capable. Latency=32.
| | I/O at 0xea00 [0xea1f].
| | Bus 0, device 16, function 3, WTCODE 0c03 1106 3038 1458 5004
| | USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#4) (rev 129).
| | IRQ 21.
| | Master Capable. Latency=32.
| | I/O at 0xeb00 [0xeb1f].
| | Bus 0, device 16, function 4, WTCODE 0c03 1106 3104 1458 5004
| | USB Controller: VIA Technologies, Inc. USB 2.0 (rev 134).
| | IRQ 21.
| | Master Capable. Latency=32.
| | Non-prefetchable 32 bit memory at 0xf6001000 [0xf60010ff].
| | Bus 0, device 17, function 0, WTCODE 0601 1106 3227 1458 5001
| | ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South] (rev 0).
| | Bus 0, device 17, function 5, WTCODE 0401 1106 3059 1458 fa30
| | Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 96).
| | IRQ 22.
| | I/O at 0xe400 [0xe4ff].
| | Bus 1, device 0, function 0, WTCODE 0300 1106 3344 1458 d000
| | VGA compatible controller: VIA Technologies, Inc. UniChrome Pro IGP (rev 1).
| | IRQ 16.
| | Master Capable. Latency=32. Min Gnt=2.
| | Prefetchable 32 bit memory at 0xf0000000 [0xf3ffffff].
| | Non-prefetchable 32 bit memory at 0xf4000000 [0xf4ffffff].
| +----------------------------------------------------
| initrd: RAM: 905416Kb total, 890584Kb free.
| initrd: Force USB hub driver.
| initrd: Loading usb bus driver.
| initrd: +--- Executing "/sbin/insmod usbcore"
| KERNEL: usb.c: registered new driver usbdevfs
| KERNEL: usb.c: registered new driver hub
| initrd: +- Errorlevel: 0, output:
| | Using /lib/modules/2.4.36/kernel/drivers/usb/usbcore.o
| initrd: +------------------------
| initrd: +--- Executing "/sbin/insmod usb-uhci"
| KERNEL: usb-uhci.c: $Revision: 1.275 $ time 13:13:26 Jul 22 2008
| KERNEL: usb-uhci.c: High bandwidth mode enabled
| KERNEL: usb-uhci.c: USB UHCI at I/O 0xe800, IRQ 21
| KERNEL: usb-uhci.c: Detected 2 ports
| KERNEL: usb.c: new USB bus registered, assigned bus number 1
| KERNEL: hub.c: USB hub found
| KERNEL: hub.c: 2 ports detected
| KERNEL: usb-uhci.c: USB UHCI at I/O 0xe900, IRQ 21
| KERNEL: usb-uhci.c: Detected 2 ports
| KERNEL: usb.c: new USB bus registered, assigned bus number 2
| KERNEL: hub.c: USB hub found
| KERNEL: hub.c: 2 ports detected
| KERNEL: usb-uhci.c: USB UHCI at I/O 0xea00, IRQ 21
| KERNEL: usb-uhci.c: Detected 2 ports
| KERNEL: usb.c: new USB bus registered, assigned bus number 3
| KERNEL: hub.c: USB hub found
| KERNEL: hub.c: 2 ports detected
| KERNEL: usb-uhci.c: USB UHCI at I/O 0xeb00, IRQ 21
| KERNEL: usb-uhci.c: Detected 2 ports
| KERNEL: usb.c: new USB bus registered, assigned bus number 4
| KERNEL: hub.c: USB hub found
| KERNEL: hub.c: 2 ports detected
| KERNEL: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
| initrd: +- Errorlevel: 0, output:
| | Using /lib/modules/2.4.36/kernel/drivers/usb/host/usb-uhci.o
| initrd: +------------------------
| initrd: +--- Executing "/sbin/insmod usb-ohci"
| initrd: +- Errorlevel: 1, output:
| | insmod: init_module: usb-ohci: No such device
| | ost/usb-ohci.o
| initrd: +------------------------
| initrd: Force USB 2.0 hub driver.
| initrd: +--- Executing "/sbin/insmod ehci-hcd"
| KERNEL: ehci_hcd 00:10.4: VIA Technologies, Inc. USB 2.0
| KERNEL: ehci_hcd 00:10.4: irq 21, pci mem f8833000
| KERNEL: usb.c: new USB bus registered, assigned bus number 5
| KERNEL: hub.c: new USB device 00:10.1-2, assigned address 2
| KERNEL: usb.c: USB device 2 (vend/prod 0x3f0/0x205) is not claimed by any active driver.
| KERNEL: ehci_hcd 00:10.4: BIOS handoff failed (104, 1010001)
| KERNEL: ehci_hcd 00:10.4: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
| KERNEL: usb.c: USB disconnect on device 00:10.1-2 address 2
| KERNEL: hub.c: USB hub found
| KERNEL: hub.c: 8 ports detected
| initrd: +- Errorlevel: 0, output:
| initrd: +------------------------
| KERNEL: hub.c: new USB device 00:10.1-2, assigned address 3
| KERNEL: usb.c: USB device 3 (vend/prod 0x3f0/0x205) is not claimed by any active driver.
| +--- FILE "/proc/bus/usb/devices" -----------------------
| | T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8
| | B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
| | D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1
| | P: Vendor=0000 ProdID=0000 Rev= 2.04
| | S: Manufacturer=Linux 2.4.36 ehci_hcd
| | S: Product=VIA Technologies, Inc. USB 2.0
| | S: SerialNumber=00:10.4
| | C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
| | I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
| | E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
| | T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
| | B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
| | D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
| | P: Vendor=0000 ProdID=0000 Rev= 0.00
| | S: Product=USB UHCI Root Hub
| | S: SerialNumber=eb00
| | C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
| | I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
| | E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
| | T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
| | B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
| | D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
| | P: Vendor=0000 ProdID=0000 Rev= 0.00
| | S: Product=USB UHCI Root Hub
| | S: SerialNumber=ea00
| | C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
| | I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
| | E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
| | T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
| | B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
| | D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
| | P: Vendor=0000 ProdID=0000 Rev= 0.00
| | S: Product=USB UHCI Root Hub
| | S: SerialNumber=e900
| | C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
| | I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
| | E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
| | T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
| | D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
| | P: Vendor=03f0 ProdID=0205 Rev= 0.00
| | S: Manufacturer=Hewlett-Packard
| | S: Product=HP ScanJet 3300C
| | C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 48mA
| | I: If#= 0 Alt= 0 #EPs= 3 Cls=10(unk. ) Sub=01 Prot=00 Driver=(none)
| | E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
| | E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
| | E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=8ms
| | T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
| | B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
| | D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
| | P: Vendor=0000 ProdID=0000 Rev= 0.00
| | S: Product=USB UHCI Root Hub
| | S: SerialNumber=e800
| | C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
| | I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
| | E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
| +----------------------------------------------------
| KERNEL: eth0: RealTek RTL8139 at 0xf883e000, 00:1a:4d:08:87:90, IRQ 18
| KERNEL: eth0: Identified 8139 chip type 'RTL-8100B/8139D'
| KERNEL: eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
| initrd: Found USB device 03f0:0205.
| initrd: Loading ethernet drivers.
| initrd: +--- Executing "/sbin/modprobe 8139too"
| initrd: +- Errorlevel: 0, output:
| initrd: +------------------------
| initrd: NIC module 8139too.o loaded.
| initrd: +--- Executing "/sbin/udhcpc --script=/sbin/dhcpCB --quit --now --interface=eth0"
| dhcpCB: DHCP command: deconfig.
| dhcpCB: DHCP command: bound.
| dhcpCB: DHCP server: 198.162.100.1.
| dhcpCB: Interface: "eth0".
| dhcpCB: IP: 198.162.100.5.
| dhcpCB: Netmask: 255.255.255.0.
| dhcpCB: Hostname: "00-1A-4D-08-87-90".
| dhcpCB: TFTP server: 198.162.100.1.
| dhcpCB: Boot file: "pro\4.4.13\pxelinux.0".
| dhcpCB: TFTP prefix: "pro\4.4.13/".
| dhcpCB: WTware wizard service: 198.162.100.1.
| initrd: +- Errorlevel: 0, output:
| initrd: +------------------------
| initrd: Trying to download file "pro\4.4.13/configs/list.wtc" from TFTP server "198.162.100.1".
| initrd: Error code 1: File not found..
| initrd: Trying to download file "pro\4.4.13/configs/00-1A-4D-08-87-90.wtc" from TFTP server "198.162.100.1".
| initrd: Error code 1: File not found..
| initrd: Trying to download file "pro\4.4.13/configs/00.1A.4D.08.87.90.wtc" from TFTP server "198.162.100.1".
| initrd: Trying to download file "pro\4.4.13/configs/all.wtc" from TFTP server "198.162.100.1".
| initrd: Error code 1: File not found..
| initrd: Trying to download file "pro\4.4.13/all.wtc" from TFTP server "198.162.100.1".
| initrd: Error code 1: File not found..
| initrd: Trying to download file "pro\all.wtc" from TFTP server "198.162.100.1".
| initrd: Error code 1: File not found..
| initrd: Trying to download file "all.wtc" from TFTP server "198.162.100.1".
| initrd: Error code 1: File not found..
| initrd: Trying to download file "wtware.lic" from TFTP server "198.162.100.1".
| initrd: Error code 1: File not found..
| initrd: Trying to download file "pro\4.4.13/wtware.lic" from TFTP server "198.162.100.1".
| initrd: WHOLE CONFIG FILE:
| +--- FILE "/tmp/cfg" -----------------------
| | #
| | #
| | # T Їрщых шёяюы№чєхЄё DOS-ъюфшЁютър. -ы ъюЁЁхъЄэюую юЄюсЁрцхэш
| | # т Notepad тvсхЁшЄх т ьхэ¦ 'LюЁьрЄ > +ЁшЇЄ' °ЁшЇЄ 'Terminal'.
| | #
| | # Этот файл создан службой WTwizard. Вы должны отредактировать
| | # его, дополнив нужными параметрами. Обязательно нужно добавить
| | # параметр win2kIP, указав терминалу адрес терминального
| | # сервера. Список параметров и подробное описание вы найдете в
| | # инструкции, Пуск - Программы - WTware - Инструкции - Параметры.
| | #
| | # Настройки, которые вы указали во время работы мастера настройки
| | # терминала, записаны в файле "00.1A.4D.08.87.90.graphic"
| | # Терминал будет использовать эти настройки, потому что ниже этот
| | # файл подключается директивой include.
| | #
| | win2kip=198.162.100.1
| | #include 00.1A.4D.08.87.90.graphic
| | usb1 = on
| | usb2 = on
| | usb3 = on
| | usb4 = on
| | video = viafb(F)
| | resolution = 1024x768
| | bpp = 16
| | refresh = 85
| | printer = lpt
| | turnoffmenu = always
| | mouse_accel_mult = 1
| | scanner = on
| | syslog = 198.162.100.1
| | #
| | # В файле используется DOS-кодировка. Для корректного
| | # отображения в Notepad выберите в меню "Формат > Шрифт"
| | # шрифт "Terminal".
| | #
| | #
| | # ‚ нв®в д ©« бЄ« ¤лў овбп «ЁжҐ§ЁЁ вҐа¬Ё «л. Џ®«лҐ
| | # «ЁжҐ§ЁЁ Ґ®Ўе®¤Ё¬® Ї®ЄгЇ вм § ¤ҐмЈЁ, Ї®¤а®ЎҐҐ §¤Ґбм:
| | #
| | # http://wtware.ru/buy.html
| | #
| | #
| | # ‹ЁжҐ§ЁЁ ¤«п вҐбвЁа®ў Ёп, ЎҐ§ ®Ја ЁзҐЁ© Ї® ўаҐ¬ҐЁ,
| | # ¬®¦® ЎҐбЇ« в® Ї®«гзЁвм, § Ї®«Ёў д®а¬г:
| | #
| | # http://wtware.ru/download.html
| | #
| | #
| | # ‹ЁжҐ§Ёп WTware б®бв®Ёв Ё§ ЇпвЁ бва®Є, Є®в®алҐ г¦® ЎҐ§
| | # Ё§¬ҐҐЁ© ЇҐаҐҐбвЁ ў нв®в д ©«. Џ®¤а®ЎҐҐ Їа® «ЁжҐ§ЁЁ
| | # зЁв ©вҐ §¤Ґбм:
| | #
| | # http://wtware.ru/licensing/terms.html
| | #
| +----------------------------------------------------
| initrd: Read config file.
| initrd: Found parameter "win2kip" with value = "198.162.100.1".
| initrd: Found parameter "lic" with value = "5e61e8eb38be276b3ad16cdda569e2b5fff19758fa490957bb33b3eed175f208c8efeb0575d74b7ddc164c21108fa4bb417ed69d35cc87d37b217ee7d1fb393b48f5bdfb38defee385e5d2c7bacc403d11798077f8a6b90217329d457e6703889a4fa58334aa84eedc6549970e21d2b62e76a1cc84ef8996e1580c504218c1e7".
| initrd: Found parameter "usb1" with value = "on".
| initrd: Found parameter "usb2" with value = "on".
| initrd: Found parameter "usb3" with value = "on".
| initrd: Found parameter "usb4" with value = "on".
| initrd: Found parameter "video" with value = "viafb(F)".
| initrd: Found parameter "resolution" with value = "1024x768".
| initrd: Found parameter "bpp" with value = "16".
| initrd: Found parameter "refresh" with value = "85".
| initrd: Found parameter "printer" with value = "lpt".
| initrd: Found parameter "turnoffmenu" with value = "always".
| initrd: Found parameter "mouse_accel_mult" with value = "1".
| initrd: Found parameter "scanner" with value = "on".
| initrd: Found parameter "syslog" with value = "198.162.100.1".
| initrd: Use DOS (alt, 866) codepage for config file.
| initrd: Using video driver VIA, S3 Unichrome.
| initrd: +--- Executing "/sbin/udhcpc --script=/sbin/dhcpCB --quit --now --interface=eth0 --hostname=00-1A-4D-08-87-90 --request=198.162.100.5"
| dhcpCB: DHCP command: deconfig.
| dhcpCB: DHCP command: bound.
| dhcpCB: DHCP server: 198.162.100.1.
| dhcpCB: Interface: "eth0".
| dhcpCB: IP: 198.162.100.5.
| dhcpCB: Netmask: 255.255.255.0.
| dhcpCB: Hostname: "00-1A-4D-08-87-90".
| dhcpCB: TFTP server: 198.162.100.1.
| dhcpCB: Boot file: "pro\4.4.13\pxelinux.0".
| dhcpCB: TFTP prefix: "pro\4.4.13/".
| dhcpCB: WTware wizard service: 198.162.100.1.
| initrd: +- Errorlevel: 0, output:
| initrd: +------------------------
| Got config from initrd.
+----------------------------------------------------
Saned listener active.
initrd: Loading VFAT filesystem driver.
initrd: +--- Executing "/sbin/insmod fat"
initrd: +- Errorlevel: 0, output:
initrd: +------------------------
initrd: +--- Executing "/sbin/insmod vfat"
initrd: +- Errorlevel: 0, output:
initrd: +------------------------
initrd: Loading ISO 9660 CDROM filesystem driver.
initrd: +--- Executing "/sbin/insmod isofs"
initrd: +- Errorlevel: 0, output:
initrd: +------------------------
initrd: Loading UTF8 charset.
initrd: +--- Executing "/sbin/insmod nls_utf8"
initrd: +- Errorlevel: 0, output:
| Using /lib/modules/2.4.36/kernel/fs/nls/nls_utf8.o
initrd: +------------------------
initrd: Loading usb storage driver.
initrd: +--- Executing "/sbin/insmod scsi_mod"
KERNEL: SCSI subsystem driver Revision: 1.00
initrd: +- Errorlevel: 0, output:
| Using /lib/modules/2.4.36/kernel/drivers/scsi/scsi_mod.o
initrd: +------------------------
initrd: +--- Executing "/sbin/insmod usb-storage"
KERNEL: Initializing USB Mass Storage driver...
KERNEL: usb.c: registered new driver usb-storage
KERNEL: USB Mass Storage support registered.
initrd: +- Errorlevel: 0, output:
| Using /lib/modules/2.4.36/kernel/drivers/usb/storage/usb-storage.o
initrd: +------------------------
initrd: +--- Executing "/sbin/insmod sd_mod"
initrd: +- Errorlevel: 0, output:
| Using /lib/modules/2.4.36/kernel/drivers/scsi/sd_mod.o
initrd: +------------------------
initrd: +--- Executing "/sbin/modprobe sr_mod"
initrd: +- Errorlevel: 0, output:
| Using /lib/modules/2.4.36/kernel/drivers/cdrom/cdrom.o
| Using /lib/modules/2.4.36/kernel/drivers/scsi/sr_mod.o
initrd: +------------------------
initrd: Trying to download file "pro\4.4.13/packages/wtpprint.pkg" from TFTP server "198.162.100.1".
initrd: Loading lpt port driver.
initrd: +--- Executing "/sbin/modprobe parport_serial"
KERNEL: parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
KERNEL: parport0: irq 7 detected
KERNEL: Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
KERNEL: ttyS00 at 0x03f8 (irq = 4) is a 16550A
initrd: +- Errorlevel: 1, output:
initrd: +------------------------
initrd: +--- Executing "/sbin/insmod lp"
KERNEL: lp0: using parport0 (polling).
initrd: +- Errorlevel: 0, output:
initrd: +------------------------
initrd: Trying to download file "pro\4.4.13/packages/wtpf.pkg" from TFTP server "198.162.100.1".
initrd: Trying to download file "pro\4.4.13/packages/wtpscan.pkg" from TFTP server "198.162.100.1".
initrd: Trying to download file "pro\4.4.13/graphic/menu.gif" from TFTP server "198.162.100.1".
initrd: Error code 1: File not found..
initrd: Trying to download file "pro\4.4.13/graphic/pleasewait.gif" from TFTP server "198.162.100.1".
initrd: Error code 1: File not found..
initrd: Trying to download file "pro\4.4.13/graphic/popup.gif" from TFTP server "198.162.100.1".
initrd: Error code 1: File not found..
init: WTware PRO second shell, v.4.4.13
pfac: Got command line /sbin/printer 0.
pfac: Ok, PID 69.
printer: Printserver, WTware PRO v.4.4.13
printer: Printserver 0, device /dev/lp0, listen at port 9100.
init: New mode: 1024x768, 16 bit, 85 Hz, modeline "".
init: /sbin/modprobe viafb mode=1024x768 bpp=16 refresh=85
init: +--- Executing "/sbin/modprobe viafb mode=1024x768 bpp=16 refresh=85"
KERNEL: VIA Graphics Intergration Chipset framebuffer 2.3 initializing
KERNEL: Console: switching to colour frame buffer device 128x48
init: +- Errorlevel: 0, output:
init: +------------------------
init: Kernel framebuffer module loaded.
init: Framebuffer device found.
init: xres 1024, xres_virtual 1024, yres 768, yres_virtual 768, bits_per_pixel 16
init: VSI.pixclock 10582, sync 00000000
init: left_margin 128, right_margin 32, hsync_len 128
init: upper_margin 16, lower_margin 4, vsync_len 4
init: Framebuffer videomode: 1024x768-16@90.
init: LINELENBYTES 2048
init: VLEN 1572864
init: Allocate 1572864 bytes of shared memory for backscreen, 801 bytes for dirty buffer.
init: Backscreen shared mem Id 00000000.
init: Dirty buffer shared mem Id 00008001.
init: Shared memory for backscreen 401dc000.
init: Shared memory for dirty buffer 40007000.
init: Total free ram: 885076 KB.
init: Bitmap cache sizes: base number: 1729.
init: Free ram after buffers allocation: 853064 KB.
init: Free ram just before session: 856984 Kb.
init: RDP: connecting to "198.162.100.1":3389
init: Kernel default buffer 87380 bytes.
init: TCP/IP connection with 198.162.100.1:3389 established
pfac: Got command line /sbin/rdpdr[disk] 4.
pfac: Ok, PID 80.
rdpdr[disk]: RDP Disk Redirector, WTware PRO v.4.4.13.
init: Send configuration to daemon.
pfac: Got command line /sbin/rdpdr[disk] 5.
pfac: Ok, PID 81.
init: Send configuration to daemon.
rdpdr[disk]: RDP Disk Redirector, WTware PRO v.4.4.13.
pfac: Got command line /sbin/rdpdr[disk] 6.
pfac: Ok, PID 82.
rdpdr[disk]: RDP Disk Redirector, WTware PRO v.4.4.13.
init: Send configuration to daemon.
pfac: Got command line /sbin/rdpdr[disk] 7.
rdpdr[disk]: RDP Disk Redirector, WTware PRO v.4.4.13.
init: Send configuration to daemon.
init: Make RDP session
init: username ""
init: password empty
init: domain ""
init: shell ""
init: directory ""
init: video 1024x768@16
init: pflags 0000006F
init: keyboard 00000409:00000000
init: hostname "00-1A-4D-08-87-90"
init: ipaddr "198.162.100.5"
pfac: Ok, PID 83.
init: RDP5 encryption (X.509).
init: RC4 key 128 bit.
init: Iteration, free RAM 856448 Kb
init: Iteration, free RAM 856440 Kb
init: Iteration, free RAM 856436 Kb
init: Iteration, free RAM 856432 Kb
init: Iteration, free RAM 856428 Kb
saned started, PID 84.
SYSLOG: <31>Jan 1 00:04:03 saned[84]: saned from sane-backends 1.0.18 ready
SYSLOG: <31>Jan 1 00:04:03 saned[84]: check_host: access by remote host: 198.162.100.1
SYSLOG: <31>Jan 1 00:04:03 saned[84]: init: access granted to PCUSER@198.162.100.1
init: Iteration, free RAM 855784 Kb
+--- FILE "/tmp/all.log" -----------------------
| WTware PRO 4.4.13 supervisor.
| KERNEL: Linux version 2.4.36 (root@compiler) (gcc version 3.4.6) #72 Tue Jul 22 13:12:44 MDT 2008
| KERNEL: BIOS-provided physical RAM map:
| KERNEL: BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
| KERNEL: BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
| KERNEL: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
| KERNEL: BIOS-e820: 0000000000100000 - 000000003bee0000 (usable)
| KERNEL: BIOS-e820: 000000003bee0000 - 000000003bee3000 (ACPI NVS)
| KERNEL: BIOS-e820: 000000003bee3000 - 000000003bef0000 (ACPI data)
| KERNEL: BIOS-e820: 000000003bef0000 - 000000003bf00000 (reserved)
| KERNEL: BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
| KERNEL: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
| KERNEL: BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
| KERNEL: Warning only 896MB will be used.
| KERNEL: Use a HIGHMEM enabled kernel.
| KERNEL: 896MB LOWMEM available.
| KERNEL: found SMP MP-table at 000f34b0
| KERNEL: hm, page 000f3000 reserved twice.
| KERNEL: hm, page 000f4000 reserved twice.
| KERNEL: hm, page 000f1000 reserved twice.
| KERNEL: hm, page 000f2000 reserved twice.
| KERNEL: On node 0 totalpages: 229376
| KERNEL: zone(0): 4096 pages.
| KERNEL: zone(1): 225280 pages.
| KERNEL: zone(2): 0 pages.
| KERNEL: ACPI: RSDP (v000 CN700 ) @ 0x000f7610
| KERNEL: ACPI: RSDT (v001 CN700 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3bee3040
| KERNEL: ACPI: FADT (v001 CN700 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3bee30c0
| KERNEL: ACPI: MADT (v001 CN700 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3bee78c0
| KERNEL: ACPI: DSDT (v001 CN700 AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
| KERNEL: ACPI: Local APIC address 0xfee00000
| KERNEL: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
| KERNEL: Processor #0 Pentium(tm) Pro APIC version 20
| KERNEL: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
| KERNEL: ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
| KERNEL: IOAPIC[0]: Assigned apic_id 2
| KERNEL: IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, IRQ 0-23
| KERNEL: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
| KERNEL: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
| KERNEL: Using ACPI (MADT) for SMP configuration information
| KERNEL: Kernel command line: root=/dev/ram/0 ramdisk_blocksize=4096 ramdisk_size=8192 quiet initrd=wtshell/wtshell BOOT_IMAGE=wtshell/bzImage
| KERNEL: Initializing CPU#0
| KERNEL: Detected 1000.011 MHz processor.
| KERNEL: Console: colour VGA+ 80x25
| KERNEL: Calibrating delay loop... 1992.29 BogoMIPS
| KERNEL: Memory: 903648k/917504k available (1038k kernel code, 13468k reserved, 520k data, 108k init, 0k highmem)
| KERNEL: Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
| KERNEL: Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
| KERNEL: Mount cache hash table entries: 512 (order: 0, 4096 bytes)
| KERNEL: Buffer cache hash table entries: 65536 (order: 6, 262144 bytes)
| KERNEL: Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
| KERNEL: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
| KERNEL: CPU: L2 Cache: 128K (64 bytes/line)
| KERNEL: CPU: After generic, caps: 27c9bbff 00100000 00000000 00000000
| KERNEL: CPU: Common caps: 27c9bbff 00100000 00000000 00000000
| KERNEL: CPU: Centaur VIA Esther processor 1000MHz stepping 09
| KERNEL: Enabling fast FPU save and restore... done.
| KERNEL: Enabling unmasked SIMD FPU exception support... done.
| KERNEL: Checking 'hlt' instruction... OK.
| KERNEL: POSIX conformance testing by UNIFIX
| KERNEL: enabled ExtINT on CPU#0
| KERNEL: ESR value before enabling vector: 00000000
| KERNEL: ESR value after enabling vector: 00000000
| KERNEL: ENABLING IO-APIC IRQs
| KERNEL: init IO_APIC IRQs
| KERNEL: IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
| KERNEL: ..TIMER: vector=0x31 pin1=2 pin2=-1
| KERNEL: Using local APIC timer interrupts.
| KERNEL: calibrating APIC timer ...
| KERNEL: ..... CPU clock speed is 1000.0317 MHz.
| KERNEL: ..... host bus clock speed is 100.0030 MHz.
| KERNEL: cpu: 0, clocks: 1000030, slice: 500015
| KERNEL: CPU0<T0:1000016,T1:500000,D:1,S:500015,C:1000030>
| KERNEL: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
| KERNEL: mtrr: detected mtrr type: Intel
| KERNEL: ACPI: Subsystem revision 20040326
| KERNEL: PCI: PCI BIOS revision 2.10 entry at 0xf9330, last bus=1
| KERNEL: PCI: Using configuration type 1
| KERNEL: ACPI: Interpreter enabled
| KERNEL: ACPI: Using IOAPIC for interrupt routing
| KERNEL: ACPI: System [ACPI] (supports S0 S1 S4 S5)
| KERNEL: ACPI: PCI Root Bridge [PCI0] (00:00)
| KERNEL: PCI: Probing PCI hardware (bus 00)
| KERNEL: PCI: Via IRQ fixup
| KERNEL: PCI: Via IRQ fixup
| KERNEL: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
| KERNEL: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
| KERNEL: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5
| KERNEL: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12)
| KERNEL: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled.
| KERNEL: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
| KERNEL: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
| KERNEL: ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
| KERNEL: ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
| KERNEL: ACPI: PCI Interrupt Link [ALKA] (IRQs *20), disabled.
| KERNEL: ACPI: PCI Interrupt Link [ALKB] (IRQs *21)
| KERNEL: ACPI: PCI Interrupt Link [ALKC] (IRQs *22)
| KERNEL: ACPI: PCI Interrupt Link [ALKD] (IRQs *23), disabled.
| KERNEL: PCI: Probing PCI hardware
| KERNEL: 00:00:05[A] -> 2-17 -> IRQ 17 level low
| KERNEL: 00:00:05 -> 2-19 -> IRQ 19 level low
| KERNEL: 00:00:05[C] -> 2-18 -> IRQ 18 level low
| KERNEL: 00:00:05[D] -> 2-16 -> IRQ 16 level low
| KERNEL: ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
| KERNEL: 00:00:10[A] -> 2-21 -> IRQ 21 level low
| KERNEL: ACPI: PCI Interrupt Link [ALKA] disabled and referenced, BIOS bug.
| KERNEL: ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
| KERNEL: 00:00:11[A] -> 2-20 -> IRQ 20 level low
| KERNEL: ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
| KERNEL: 00:00:11[C] -> 2-22 -> IRQ 22 level low
| KERNEL: ACPI: PCI Interrupt Link [ALKD] disabled and referenced, BIOS bug.
| KERNEL: ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
| KERNEL: 00:00:11[D] -> 2-23 -> IRQ 23 level low
| KERNEL: number of MP IRQ sources: 15.
| KERNEL: number of IO-APIC #2 registers: 24.
| KERNEL: testing the IO APIC.......................
| KERNEL:
| KERNEL: IO APIC #2......
| KERNEL: .... register #00: 02000000
| KERNEL: ....... : physical APIC id: 02
| KERNEL: ....... : Delivery Type: 0
| KERNEL: ....... : LTS : 0
| KERNEL: .... register #01: 00178003
| KERNEL: ....... : max redirection entries: 0017
| KERNEL: ....... : PRQ implemented: 1
| KERNEL: ....... : IO APIC version: 0003
| KERNEL: .... IRQ redirection table:
| KERNEL: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
| KERNEL: 00 000 00 1 0 0 0 0 0 0 00
| KERNEL: 01 001 01 0 0 0 0 0 1 1 39
| KERNEL: 02 001 01 0 0 0 0 0 1 1 31
| KERNEL: 03 001 01 0 0 0 0 0 1 1 41
| KERNEL: 04 001 01 0 0 0 0 0 1 1 49
| KERNEL: 05 001 01 0 0 0 0 0 1 1 51
| KERNEL: 06 001 01 0 0 0 0 0 1 1 59
| KERNEL: 07 001 01 0 0 0 0 0 1 1 61
| KERNEL: 08 001 01 0 0 0 0 0 1 1 69
| KERNEL: 09 001 01 0 1 0 1 0 1 1 71
| KERNEL: 0a 001 01 0 0 0 0 0 1 1 79
| KERNEL: 0b 001 01 0 0 0 0 0 1 1 81
| KERNEL: 0c 001 01 0 0 0 0 0 1 1 89
| KERNEL: 0d 001 01 0 0 0 0 0 1 1 91
| KERNEL: 0e 001 01 0 0 0 0 0 1 1 99
| KERNEL: 0f 001 01 0 0 0 0 0 1 1 A1
| KERNEL: 10 001 01 1 1 0 1 0 1 1 C1
| KERNEL: 11 001 01 1 1 0 1 0 1 1 A9
| KERNEL: 12 001 01 1 1 0 1 0 1 1 B9
| KERNEL: 13 001 01 1 1 0 1 0 1 1 B1
| KERNEL: 14 001 01 1 1 0 1 0 1 1 D1
| KERNEL: 15 001 01 1 1 0 1 0 1 1 C9
| KERNEL: 16 001 01 1 1 0 1 0 1 1 D9
| KERNEL: 17 001 01 1 1 0 1 0 1 1 E1
| KERNEL: IRQ to pin mappings:
| KERNEL: IRQ0 -> 0:2
| KERNEL: IRQ1 -> 0:1
| KERNEL: IRQ3 -> 0:3
| KERNEL: IRQ4 -> 0:4
| KERNEL: IRQ5 -> 0:5
| KERNEL: IRQ6 -> 0:6
| KERNEL: IRQ7 -> 0:7
| KERNEL: IRQ8 -> 0:8
| KERNEL: IRQ9 -> 0:9
| KERNEL: IRQ10 -> 0:10
| KERNEL: IRQ11 -> 0:11
| KERNEL: IRQ12 -> 0:12
| KERNEL: IRQ13 -> 0:13
| KERNEL: IRQ14 -> 0:14
| KERNEL: IRQ15 -> 0:15
| KERNEL: IRQ16 -> 0:16
| KERNEL: IRQ17 -> 0:17
| KERNEL: IRQ18 -> 0:18
| KERNEL: IRQ19 -> 0:19
| KERNEL: IRQ20 -> 0:20
| KERNEL: IRQ21 -> 0:21
| KERNEL: IRQ22 -> 0:22
| KERNEL: IRQ23 -> 0:23
| KERNEL: .................................... done.
| KERNEL: PCI: Using ACPI for IRQ routing
| KERNEL: isapnp: Scanning for PnP cards...
| KERNEL: isapnp: No Plug & Play device found
| KERNEL: Linux NET4.0 for Linux 2.4
| KERNEL: Based upon Swansea University Computer Society NET3.039
| KERNEL: Initializing RT netlink socket
| KERNEL: Starting kswapd
| KERNEL: devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
| KERNEL: devfs: boot_options: 0x1
| KERNEL: ACPI: Power Button (FF) [PWRF]
| KERNEL: ACPI: Sleep Button (CM) [SLPB]
| KERNEL: ACPI: Processor [CPU0] (supports C1)
| KERNEL: RAMDISK driver initialized: 16 RAM disks of 8192K size 4096 blocksize
| KERNEL: Initializing Cryptographic API
| KERNEL: NET4: Linux TCP/IP 1.0 for NET4.0
| KERNEL: IP Protocols: ICMP, UDP, TCP
| KERNEL: IP: routing cache hash table of 8192 buckets, 64Kbytes
| KERNEL: TCP: Hash tables configured (established 262144 bind 65536)
| KERNEL: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
| KERNEL: RAMDISK: cramfs filesystem found at block 0
| KERNEL: RAMDISK: Loading 1660 blocks [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\done.
| KERNEL: Freeing initrd memory: 1660k freed
| KERNEL: VFS: Mounted root (cramfs filesystem) readonly.
| KERNEL: Mounted devfs on /dev
| KERNEL: Freeing unused kernel memory: 108k freed
| pfac: Ok, PID 10.
| initrd: WTware PRO shell, v.4.4.13
| initrd: Kernel command line: root=/dev/ram/0 ramdisk_blocksize=4096 ramdisk_size=8192 quiet initrd=wtshell/wtshell BOOT_IMAGE=wtshell/bzImage
| .
| initrd: Ethernet boot.
| initrd: Kernel: 2.4.36, modules in /lib/modules/2.4.36.
| initrd: PCIID: 1106:0314 sub 1458:5000, class 0x0600.
| initrd: PCIID: 1106:1314 sub 0000:0000, class 0x0600.
| initrd: PCIID: 1106:2314 sub 0000:0000, class 0x0600.
| initrd: PCIID: 1106:3208 sub 0000:0000, class 0x0600.
| initrd: PCIID: 1106:4314 sub 0000:0000, class 0x0600.
| initrd: PCIID: 1106:7314 sub 0000:0000, class 0x0600.
| initrd: PCIID: 1106:b198 sub 0000:0000, class 0x0604.
| initrd: PCIID: 10ec:8139 sub 1458:e000, class 0x0200.
| initrd: PCIID: 1106:0571 sub 1458:5002, class 0x0101.
| initrd: PCIID: 1106:3038 sub 1458:5004, class 0x0c03.
| initrd: PCIID: 1106:3038 sub 1458:5004, class 0x0c03.
| initrd: PCIID: 1106:3038 sub 1458:5004, class 0x0c03.
| initrd: PCIID: 1106:3038 sub 1458:5004, class 0x0c03.
| initrd: PCIID: 1106:3104 sub 1458:5004, class 0x0c03.
| initrd: PCIID: 1106:3227 sub 1458:5001, class 0x0601.
| initrd: PCIID: 1106:3059 sub 1458:fa30, class 0x0401.
| initrd: PCIID: 1106:3344 sub 1458:d000, class 0x0300.
| initrd: PCIID, network: 10ec:8139.
| initrd: PCIID, VGA: 1106:3344.
| initrd: PCIID, sound: 1106:3059.
| +--- FILE "/proc/pci" -----------------------
| | PCI devices found:
| | Bus 0, device 0, function 0, WTCODE 0600 1106 0314 1458 5000
| | Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge (rev 0).
| | Master Capable. Latency=8.
| | Prefetchable 32 bit memory at 0xe8000000 [0xefffffff].
| | Bus 0, device 0, function 1, WTCODE 0600 1106 1314 0000 0000
| | Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge (rev 0).
| | Bus 0, device 0, function 2, WTCODE 0600 1106 2314 0000 0000
| | Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge (rev 0).
| | Bus 0, device 0, function 3, WTCODE 0600 1106 3208 0000 0000
| | Host bridge: VIA Technologies, Inc. PT890 Host Bridge (rev 0).
| | Bus 0, device 0, function 4, WTCODE 0600 1106 4314 0000 0000
| | Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge (rev 0).
| | Bus 0, device 0, function 7, WTCODE 0600 1106 7314 0000 0000
| | Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge (rev 0).
| | Bus 0, device 1, function 0, WTCODE 0604 1106 b198 0000 0000
| | PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge (rev 0).
| | Master Capable. No bursts. Min Gnt=10.
| | Bus 0, device 7, function 0, WTCODE 0200 10ec 8139 1458 e000
| | Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 16).
| | IRQ 18.
| | Master Capable. Latency=32. Min Gnt=32.Max Lat=64.
| | I/O at 0xe000 [0xe0ff].
| | Non-prefetchable 32 bit memory at 0xf6000000 [0xf60000ff].
| | Bus 0, device 15, function 0, WTCODE 0101 1106 0571 1458 5002
| | IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 6).
| | IRQ 20.
| | Master Capable. Latency=32.
| | I/O at 0xec00 [0xec0f].
| | Bus 0, device 16, function 0, WTCODE 0c03 1106 3038 1458 5004
| | USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 129).
| | IRQ 21.
| | Master Capable. Latency=32.
| | I/O at 0xe800 [0xe81f].
| | Bus 0, device 16, function 1, WTCODE 0c03 1106 3038 1458 5004
| | USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2) (rev 129).
| | IRQ 21.
| | Master Capable. Latency=32.
| | I/O at 0xe900 [0xe91f].
| | Bus 0, device 16, function 2, WTCODE 0c03 1106 3038 1458 5004
| | USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3) (rev 129).
| | IRQ 21.
| | Master Capable. Latency=32.
| | I/O at 0xea00 [0xea1f].
| | Bus 0, device 16, function 3, WTCODE 0c03 1106 3038 1458 5004
| | USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#4) (rev 129).
| | IRQ 21.
| | Master Capable. Latency=32.
| | I/O at 0xeb00 [0xeb1f].
| | Bus 0, device 16, function 4, WTCODE 0c03 1106 3104 1458 5004
| | USB Controller: VIA Technologies, Inc. USB 2.0 (rev 134).
| | IRQ 21.
| | Master Capable. Latency=32.
| | Non-prefetchable 32 bit memory at 0xf6001000 [0xf60010ff].
| | Bus 0, device 17, function 0, WTCODE 0601 1106 3227 1458 5001
| | ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South] (rev 0).
| | Bus 0, device 17, function 5, WTCODE 0401 1106 3059 1458 fa30
| | Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 96).
| | IRQ 22.
| | I/O at 0xe400 [0xe4ff].
| | Bus 1, device 0, function 0, WTCODE 0300 1106 3344 1458 d000
| | VGA compatible controller: VIA Technologies, Inc. UniChrome Pro IGP (rev 1).
| | IRQ 16.
| | Master Capable. Latency=32. Min Gnt=2.
| | Prefetchable 32 bit memory at 0xf0000000 [0xf3ffffff].
| | Non-prefetchable 32 bit memory at 0xf4000000 [0xf4ffffff].
| +----------------------------------------------------
| initrd: RAM: 905416Kb total, 890584Kb free.
| initrd: Force USB hub driver.
| initrd: Loading usb bus driver.
| initrd: +--- Executing "/sbin/insmod usbcore"
| KERNEL: usb.c: registered new driver usbdevfs
| KERNEL: usb.c: registered new driver hub
| initrd: +- Errorlevel: 0, output:
| | Using /lib/modules/2.4.36/kernel/drivers/usb/usbcore.o
| initrd: +------------------------
| initrd: +--- Executing "/sbin/insmod usb-uhci"
| KERNEL: usb-uhci.c: $Revision: 1.275 $ time 13:13:26 Jul 22 2008
| KERNEL: usb-uhci.c: High bandwidth mode enabled
| KERNEL: usb-uhci.c: USB UHCI at I/O 0xe800, IRQ 21
| KERNEL: usb-uhci.c: Detected 2 ports
| KERNEL: usb.c: new USB bus registered, assigned bus number 1
| KERNEL: hub.c: USB hub found
| KERNEL: hub.c: 2 ports detected
| KERNEL: usb-uhci.c: USB UHCI at I/O 0xe900, IRQ 21
| KERNEL: usb-uhci.c: Detected 2 ports
| KERNEL: usb.c: new USB bus registered, assigned bus number 2
| KERNEL: hub.c: USB hub found
| KERNEL: hub.c: 2 ports detected
| KERNEL: usb-uhci.c: USB UHCI at I/O 0xea00, IRQ 21
| KERNEL: usb-uhci.c: Detected 2 ports
| KERNEL: usb.c: new USB bus registered, assigned bus number 3
| KERNEL: hub.c: USB hub found
| KERNEL: hub.c: 2 ports detected
| KERNEL: usb-uhci.c: USB UHCI at I/O 0xeb00, IRQ 21
| KERNEL: usb-uhci.c: Detected 2 ports
| KERNEL: usb.c: new USB bus registered, assigned bus number 4
| KERNEL: hub.c: USB hub found
| KERNEL: hub.c: 2 ports detected
| KERNEL: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
| initrd: +- Errorlevel: 0, output:
| | Using /lib/modules/2.4.36/kernel/drivers/usb/host/usb-uhci.o
| initrd: +------------------------
| initrd: +--- Executing "/sbin/insmod usb-ohci"
| initrd: +- Errorlevel: 1, output:
| | insmod: init_module: usb-ohci: No such device
| | ost/usb-ohci.o
| initrd: +------------------------
| initrd: Force USB 2.0 hub driver.
| initrd: +--- Executing "/sbin/insmod ehci-hcd"
| KERNEL: ehci_hcd 00:10.4: VIA Technologies, Inc. USB 2.0
| KERNEL: ehci_hcd 00:10.4: irq 21, pci mem f8833000
| KERNEL: usb.c: new USB bus registered, assigned bus number 5
| KERNEL: hub.c: new USB device 00:10.1-2, assigned address 2
| KERNEL: usb.c: USB device 2 (vend/prod 0x3f0/0x205) is not claimed by any active driver.
| KERNEL: ehci_hcd 00:10.4: BIOS handoff failed (104, 1010001)
| KERNEL: ehci_hcd 00:10.4: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
| KERNEL: usb.c: USB disconnect on device 00:10.1-2 address 2
| KERNEL: hub.c: USB hub found
| KERNEL: hub.c: 8 ports detected
| initrd: +- Errorlevel: 0, output:
| initrd: +------------------------
| KERNEL: hub.c: new USB device 00:10.1-2, assigned address 3
| KERNEL: usb.c: USB device 3 (vend/prod 0x3f0/0x205) is not claimed by any active driver.
| +--- FILE "/proc/bus/usb/devices" -----------------------
| | T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 8
| | B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
| | D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1
| | P: Vendor=0000 ProdID=0000 Rev= 2.04
| | S: Manufacturer=Linux 2.4.36 ehci_hcd
| | S: Product=VIA Technologies, Inc. USB 2.0
| | S: SerialNumber=00:10.4
| | C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
| | I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
| | E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
| | T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
| | B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
| | D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
| | P: Vendor=0000 ProdID=0000 Rev= 0.00
| | S: Product=USB UHCI Root Hub
| | S: SerialNumber=eb00
| | C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
| | I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
| | E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
| | T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
| | B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
| | D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
| | P: Vendor=0000 ProdID=0000 Rev= 0.00
| | S: Product=USB UHCI Root Hub
| | S: SerialNumber=ea00
| | C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
| | I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
| | E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
| | T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
| | B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
| | D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
| | P: Vendor=0000 ProdID=0000 Rev= 0.00
| | S: Product=USB UHCI Root Hub
| | S: SerialNumber=e900
| | C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
| | I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
| | E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
| | T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
| | D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
| | P: Vendor=03f0 ProdID=0205 Rev= 0.00
| | S: Manufacturer=Hewlett-Packard
| | S: Product=HP ScanJet 3300C
| | C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 48mA
| | I: If#= 0 Alt= 0 #EPs= 3 Cls=10(unk. ) Sub=01 Prot=00 Driver=(none)
| | E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
| | E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
| | E: Ad=83(I) Atr=03(Int.) MxPS= 1 Ivl=8ms
| | T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
| | B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
| | D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
| | P: Vendor=0000 ProdID=0000 Rev= 0.00
| | S: Product=USB UHCI Root Hub
| | S: SerialNumber=e800
| | C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
| | I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
| | E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
| +----------------------------------------------------
| KERNEL: eth0: RealTek RTL8139 at 0xf883e000, 00:1a:4d:08:87:90, IRQ 18
| KERNEL: eth0: Identified 8139 chip type 'RTL-8100B/8139D'
| KERNEL: eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
| initrd: Found USB device 03f0:0205.
| initrd: Loading ethernet drivers.
| initrd: +--- Executing "/sbin/modprobe 8139too"
| initrd: +- Errorlevel: 0, output:
| initrd: +------------------------
| initrd: NIC module 8139too.o loaded.
| initrd: +--- Executing "/sbin/udhcpc --script=/sbin/dhcpCB --quit --now --interface=eth0"
| dhcpCB: DHCP command: deconfig.
| dhcpCB: DHCP command: bound.
| dhcpCB: DHCP server: 198.162.100.1.
| dhcpCB: Interface: "eth0".
| dhcpCB: IP: 198.162.100.5.
| dhcpCB: Netmask: 255.255.255.0.
| dhcpCB: Hostname: "00-1A-4D-08-87-90".
| dhcpCB: TFTP server: 198.162.100.1.
| dhcpCB: Boot file: "pro\4.4.13\pxelinux.0".
| dhcpCB: TFTP prefix: "pro\4.4.13/".
| dhcpCB: WTware wizard service: 198.162.100.1.
| initrd: +- Errorlevel: 0, output:
| initrd: +------------------------
| initrd: Trying to download file "pro\4.4.13/configs/list.wtc" from TFTP server "198.162.100.1".
| initrd: Error code 1: File not found..
| initrd: Trying to download file "pro\4.4.13/configs/00-1A-4D-08-87-90.wtc" from TFTP server "198.162.100.1".
| initrd: Error code 1: File not found..
| initrd: Trying to download file "pro\4.4.13/configs/00.1A.4D.08.87.90.wtc" from TFTP server "198.162.100.1".
| initrd: Trying to download file "pro\4.4.13/configs/all.wtc" from TFTP server "198.162.100.1".
| initrd: Error code 1: File not found..
| initrd: Trying to download file "pro\4.4.13/all.wtc" from TFTP server "198.162.100.1".
| initrd: Error code 1: File not found..
| initrd: Trying to download file "pro\all.wtc" from TFTP server "198.162.100.1".
| initrd: Error code 1: File not found..
| initrd: Trying to download file "all.wtc" from TFTP server "198.162.100.1".
| initrd: Error code 1: File not found..
| initrd: Trying to download file "wtware.lic" from TFTP server "198.162.100.1".
| initrd: Error code 1: File not found..
| initrd: Trying to download file "pro\4.4.13/wtware.lic" from TFTP server "198.162.100.1".
| initrd: WHOLE CONFIG FILE:
| +--- FILE "/tmp/cfg" -----------------------
| | #
| | #
| | # T Їрщых шёяюы№чєхЄё DOS-ъюфшЁютър. -ы ъюЁЁхъЄэюую юЄюсЁрцхэш
| | # т Notepad тvсхЁшЄх т ьхэ¦ 'LюЁьрЄ > +ЁшЇЄ' °ЁшЇЄ 'Terminal'.
| | #
| | # Этот файл создан службой WTwizard. Вы должны отредактировать
| | # его, дополнив нужными параметрами. Обязательно нужно добавить
| | # параметр win2kIP, указав терминалу адрес терминального
| | # сервера. Список параметров и подробное описание вы найдете в
| | # инструкции, Пуск - Программы - WTware - Инструкции - Параметры.
| | #
| | # Настройки, которые вы указали во время работы мастера настройки
| | # терминала, записаны в файле "00.1A.4D.08.87.90.graphic"
| | # Терминал будет использовать эти настройки, потому что ниже этот
| | # файл подключается директивой include.
| | #
| | win2kip=198.162.100.1
| | #include 00.1A.4D.08.87.90.graphic
| | usb1 = on
| | usb2 = on
| | usb3 = on
| | usb4 = on
| | video = viafb(F)
| | resolution = 1024x768
| | bpp = 16
| | refresh = 85
| | printer = lpt
| | turnoffmenu = always
| | mouse_accel_mult = 1
| | scanner = on
| | syslog = 198.162.100.1
| | #
| | # В файле используется DOS-кодировка. Для корректного
| | # отображения в Notepad выберите в меню "Формат > Шрифт"
| | # шрифт "Terminal".
| | #
| | #
| | # ‚ нв®в д ©« бЄ« ¤лў овбп «ЁжҐ§ЁЁ вҐа¬Ё «л. Џ®«лҐ
| | # «ЁжҐ§ЁЁ Ґ®Ўе®¤Ё¬® Ї®ЄгЇ вм § ¤ҐмЈЁ, Ї®¤а®ЎҐҐ §¤Ґбм:
| | #
| | # http://wtware.ru/buy.html
| | #
| | #
| | # ‹ЁжҐ§ЁЁ ¤«п вҐбвЁа®ў Ёп, ЎҐ§ ®Ја ЁзҐЁ© Ї® ўаҐ¬ҐЁ,
| | # ¬®¦® ЎҐбЇ« в® Ї®«гзЁвм, § Ї®«Ёў д®а¬г:
| | #
| | # http://wtware.ru/download.html
| | #
| | #
| | # ‹ЁжҐ§Ёп WTware б®бв®Ёв Ё§ ЇпвЁ бва®Є, Є®в®алҐ г¦® ЎҐ§
| | # Ё§¬ҐҐЁ© ЇҐаҐҐбвЁ ў нв®в д ©«. Џ®¤а®ЎҐҐ Їа® «ЁжҐ§ЁЁ
| | # зЁв ©вҐ §¤Ґбм:
| | #
| | # http://wtware.ru/licensing/terms.html
| | #
| +----------------------------------------------------
| initrd: Read config file.
| initrd: Found parameter "win2kip" with value = "198.162.100.1".
| initrd: Found parameter "lic" with value = "5e61e8eb38be276b3ad16cdda569e2b5fff19758fa490957bb33b3eed175f208c8efeb0575d74b7ddc164c21108fa4bb417ed69d35cc87d37b217ee7d1fb393b48f5bdfb38defee385e5d2c7bacc403d11798077f8a6b90217329d457e6703889a4fa58334aa84eedc6549970e21d2b62e76a1cc84ef8996e1580c504218c1e7".
| initrd: Found parameter "usb1" with value = "on".
| initrd: Found parameter "usb2" with value = "on".
| initrd: Found parameter "usb3" with value = "on".
| initrd: Found parameter "usb4" with value = "on".
| initrd: Found parameter "video" with value = "viafb(F)".
| initrd: Found parameter "resolution" with value = "1024x768".
| initrd: Found parameter "bpp" with value = "16".
| initrd: Found parameter "refresh" with value = "85".
| initrd: Found parameter "printer" with value = "lpt".
| initrd: Found parameter "turnoffmenu" with value = "always".
| initrd: Found parameter "mouse_accel_mult" with value = "1".
| initrd: Found parameter "scanner" with value = "on".
| initrd: Found parameter "syslog" with value = "198.162.100.1".
| initrd: Use DOS (alt, 866) codepage for config file.
| initrd: Using video driver VIA, S3 Unichrome.
| initrd: +--- Executing "/sbin/udhcpc --script=/sbin/dhcpCB --quit --now --interface=eth0 --hostname=00-1A-4D-08-87-90 --request=198.162.100.5"
| dhcpCB: DHCP command: deconfig.
| dhcpCB: DHCP command: bound.
| dhcpCB: DHCP server: 198.162.100.1.
| dhcpCB: Interface: "eth0".
| dhcpCB: IP: 198.162.100.5.
| dhcpCB: Netmask: 255.255.255.0.
| dhcpCB: Hostname: "00-1A-4D-08-87-90".
| dhcpCB: TFTP server: 198.162.100.1.
| dhcpCB: Boot file: "pro\4.4.13\pxelinux.0".
| dhcpCB: TFTP prefix: "pro\4.4.13/".
| dhcpCB: WTware wizard service: 198.162.100.1.
| initrd: +- Errorlevel: 0, output:
| initrd: +------------------------
| Got config from initrd.
+----------------------------------------------------
Saned listener active.
initrd: Loading VFAT filesystem driver.
initrd: +--- Executing "/sbin/insmod fat"
initrd: +- Errorlevel: 0, output:
initrd: +------------------------
initrd: +--- Executing "/sbin/insmod vfat"
initrd: +- Errorlevel: 0, output:
initrd: +------------------------
initrd: Loading ISO 9660 CDROM filesystem driver.
initrd: +--- Executing "/sbin/insmod isofs"
initrd: +- Errorlevel: 0, output:
initrd: +------------------------
initrd: Loading UTF8 charset.
initrd: +--- Executing "/sbin/insmod nls_utf8"
initrd: +- Errorlevel: 0, output:
| Using /lib/modules/2.4.36/kernel/fs/nls/nls_utf8.o
initrd: +------------------------
initrd: Loading usb storage driver.
initrd: +--- Executing "/sbin/insmod scsi_mod"
KERNEL: SCSI subsystem driver Revision: 1.00
initrd: +- Errorlevel: 0, output:
| Using /lib/modules/2.4.36/kernel/drivers/scsi/scsi_mod.o
initrd: +------------------------
initrd: +--- Executing "/sbin/insmod usb-storage"
KERNEL: Initializing USB Mass Storage driver...
KERNEL: usb.c: registered new driver usb-storage
KERNEL: USB Mass Storage support registered.
initrd: +- Errorlevel: 0, output:
| Using /lib/modules/2.4.36/kernel/drivers/usb/storage/usb-storage.o
initrd: +------------------------
initrd: +--- Executing "/sbin/insmod sd_mod"
initrd: +- Errorlevel: 0, output:
| Using /lib/modules/2.4.36/kernel/drivers/scsi/sd_mod.o
initrd: +------------------------
initrd: +--- Executing "/sbin/modprobe sr_mod"
initrd: +- Errorlevel: 0, output:
| Using /lib/modules/2.4.36/kernel/drivers/cdrom/cdrom.o
| Using /lib/modules/2.4.36/kernel/drivers/scsi/sr_mod.o
initrd: +------------------------
initrd: Trying to download file "pro\4.4.13/packages/wtpprint.pkg" from TFTP server "198.162.100.1".
initrd: Loading lpt port driver.
initrd: +--- Executing "/sbin/modprobe parport_serial"
KERNEL: parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
KERNEL: parport0: irq 7 detected
KERNEL: Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled
KERNEL: ttyS00 at 0x03f8 (irq = 4) is a 16550A
initrd: +- Errorlevel: 1, output:
initrd: +------------------------
initrd: +--- Executing "/sbin/insmod lp"
KERNEL: lp0: using parport0 (polling).
initrd: +- Errorlevel: 0, output:
initrd: +------------------------
initrd: Trying to download file "pro\4.4.13/packages/wtpf.pkg" from TFTP server "198.162.100.1".
initrd: Trying to download file "pro\4.4.13/packages/wtpscan.pkg" from TFTP server "198.162.100.1".
initrd: Trying to download file "pro\4.4.13/graphic/menu.gif" from TFTP server "198.162.100.1".
initrd: Error code 1: File not found..
initrd: Trying to download file "pro\4.4.13/graphic/pleasewait.gif" from TFTP server "198.162.100.1".
initrd: Error code 1: File not found..
initrd: Trying to download file "pro\4.4.13/graphic/popup.gif" from TFTP server "198.162.100.1".
initrd: Error code 1: File not found..
init: WTware PRO second shell, v.4.4.13
pfac: Got command line /sbin/printer 0.
pfac: Ok, PID 69.
printer: Printserver, WTware PRO v.4.4.13
printer: Printserver 0, device /dev/lp0, listen at port 9100.
init: New mode: 1024x768, 16 bit, 85 Hz, modeline "".
init: /sbin/modprobe viafb mode=1024x768 bpp=16 refresh=85
init: +--- Executing "/sbin/modprobe viafb mode=1024x768 bpp=16 refresh=85"
KERNEL: VIA Graphics Intergration Chipset framebuffer 2.3 initializing
KERNEL: Console: switching to colour frame buffer device 128x48
init: +- Errorlevel: 0, output:
init: +------------------------
init: Kernel framebuffer module loaded.
init: Framebuffer device found.
init: xres 1024, xres_virtual 1024, yres 768, yres_virtual 768, bits_per_pixel 16
init: VSI.pixclock 10582, sync 00000000
init: left_margin 128, right_margin 32, hsync_len 128
init: upper_margin 16, lower_margin 4, vsync_len 4
init: Framebuffer videomode: 1024x768-16@90.
init: LINELENBYTES 2048
init: VLEN 1572864
init: Allocate 1572864 bytes of shared memory for backscreen, 801 bytes for dirty buffer.
init: Backscreen shared mem Id 00000000.
init: Dirty buffer shared mem Id 00008001.
init: Shared memory for backscreen 401dc000.
init: Shared memory for dirty buffer 40007000.
init: Total free ram: 885076 KB.
init: Bitmap cache sizes: base number: 1729.
init: Free ram after buffers allocation: 853064 KB.
init: Free ram just before session: 856984 Kb.
init: RDP: connecting to "198.162.100.1":3389
init: Kernel default buffer 87380 bytes.
init: TCP/IP connection with 198.162.100.1:3389 established
pfac: Got command line /sbin/rdpdr[disk] 4.
pfac: Ok, PID 80.
rdpdr[disk]: RDP Disk Redirector, WTware PRO v.4.4.13.
init: Send configuration to daemon.
pfac: Got command line /sbin/rdpdr[disk] 5.
pfac: Ok, PID 81.
init: Send configuration to daemon.
rdpdr[disk]: RDP Disk Redirector, WTware PRO v.4.4.13.
pfac: Got command line /sbin/rdpdr[disk] 6.
pfac: Ok, PID 82.
rdpdr[disk]: RDP Disk Redirector, WTware PRO v.4.4.13.
init: Send configuration to daemon.
pfac: Got command line /sbin/rdpdr[disk] 7.
rdpdr[disk]: RDP Disk Redirector, WTware PRO v.4.4.13.
init: Send configuration to daemon.
init: Make RDP session
init: username ""
init: password empty
init: domain ""
init: shell ""
init: directory ""
init: video 1024x768@16
init: pflags 0000006F
init: keyboard 00000409:00000000
init: hostname "00-1A-4D-08-87-90"
init: ipaddr "198.162.100.5"
pfac: Ok, PID 83.
init: RDP5 encryption (X.509).
init: RC4 key 128 bit.
init: Iteration, free RAM 856448 Kb
init: Iteration, free RAM 856440 Kb
init: Iteration, free RAM 856436 Kb
init: Iteration, free RAM 856432 Kb
init: Iteration, free RAM 856428 Kb
saned started, PID 84.
SYSLOG: <31>Jan 1 00:04:03 saned[84]: saned from sane-backends 1.0.18 ready
SYSLOG: <31>Jan 1 00:04:03 saned[84]: check_host: access by remote host: 198.162.100.1
SYSLOG: <31>Jan 1 00:04:03 saned[84]: init: access granted to PCUSER@198.162.100.1
init: Iteration, free RAM 855784 Kb
-
aka
- Разработчик
- Сообщения: 11849
- Зарегистрирован: Ср окт 01, 2003 12:06 am
- Откуда: Роcсия, Тольятти
- Контактная информация:
Re: wtware и сканер
Лог хороший...
Попробуй свежую 4.4.15 - там более свежий SANE, может оно само пройдет. А еще лучше попробуй бету 4.5.14 - там и SANE свежий, и драйвера USB лучше. Еще можно попробовать запретить USB 2.0 в биосе.
Если не поможет - напиши почтой на aka@pxe.ru, будем разбираться. Поддержка сканера HP 3300C у SANE заявлена как полная, должно заработать.
Попробуй свежую 4.4.15 - там более свежий SANE, может оно само пройдет. А еще лучше попробуй бету 4.5.14 - там и SANE свежий, и драйвера USB лучше. Еще можно попробовать запретить USB 2.0 в биосе.
Если не поможет - напиши почтой на aka@pxe.ru, будем разбираться. Поддержка сканера HP 3300C у SANE заявлена как полная, должно заработать.