+--- FILE "/tmp/all.log" -----------------------
| WTware PRO 4.5.15 supervisor.
| KERNEL: Linux version 2.6.27 (root@compiler) (gcc version 4.2.1) #1 PREEMPT Sat Oct 11 13:30:56 UTC 2008
| KERNEL: BIOS-provided physical RAM map:
| KERNEL:  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
| KERNEL:  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
| KERNEL:  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
| KERNEL:  BIOS-e820: 0000000000100000 - 0000000008000000 (usable)
| KERNEL:  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
| KERNEL: last_pfn = 0x8000 max_arch_pfn = 0x100000
| KERNEL: kernel direct mapping tables up to 8000000 @ 7000-2b000
| KERNEL: RAMDISK: 07e43000 - 07fe0000
| KERNEL: DMI not present or invalid.
| KERNEL: ACPI Error (tbxfroot-0218): A valid RSDP was not found [20080609]
| KERNEL: ACPI: no DMI BIOS year, acpi=force is required to enable ACPI
| KERNEL: ACPI: Disabling ACPI support
| KERNEL: 128MB LOWMEM available.
| KERNEL:   mapped low ram: 0 - 08000000
| KERNEL:   low ram: 00000000 - 08000000
| KERNEL:   bootmap 00001000 - 00002000
| KERNEL: (7 early reservations) ==> bootmem [0000000000 - 0008000000]
| KERNEL:   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
| KERNEL:   #1 [0000100000 - 000034ee58]    TEXT DATA BSS ==> [0000100000 - 000034ee58]
| KERNEL:   #2 [0007e43000 - 0007fe0000]          RAMDISK ==> [0007e43000 - 0007fe0000]
| KERNEL:   #3 [000034f000 - 0000351000]    INIT_PG_TABLE ==> [000034f000 - 0000351000]
| KERNEL:   #4 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
| KERNEL:   #5 [0000007000 - 0000026000]          PGTABLE ==> [0000007000 - 0000026000]
| KERNEL:   #6 [0000001000 - 0000002000]          BOOTMAP ==> [0000001000 - 0000002000]
| KERNEL: Zone PFN ranges:
| KERNEL:   DMA      0x00000000 -> 0x00001000
| KERNEL:   Normal   0x00001000 -> 0x00008000
| KERNEL: Movable zone start PFN for each node
| KERNEL: early_node_map[2] active PFN ranges
| KERNEL:     0: 0x00000000 -> 0x0000009f
| KERNEL:     0: 0x00000100 -> 0x00008000
| KERNEL: On node 0 totalpages: 32671
| KERNEL: free_area_init_node: node 0, pgdat c02e9840, node_mem_map c1000000
| KERNEL:   DMA zone: 3967 pages, LIFO batch:0
| KERNEL:   Normal zone: 28448 pages, LIFO batch:7
| KERNEL: No local APIC present or hardware disabled
| KERNEL: mapped APIC to ffffb000 (01101000)
| KERNEL: Allocating PCI resources starting at 10000000 (gap: 8000000:f7000000)
| KERNEL: Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32415
| KERNEL: Kernel command line: root=/dev/ram0 ramdisk_blocksize=4096 ramdisk_size=8192 quiet initrd=wtshell/wtshell BOOT_IMAGE=wtshell/bzImage
| KERNEL: Initializing CPU#0
| KERNEL: PID hash table entries: 512 (order: 9, 2048 bytes)
| KERNEL: Console: colour VGA+ 80x25
| KERNEL: console [tty0] enabled
| KERNEL: Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
| KERNEL: Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
| KERNEL: Memory: 125112k/131072k available (1483k kernel code, 5412k reserved, 485k data, 216k init, 0k highmem)
| KERNEL: virtual kernel memory layout:
| KERNEL:     fixmap  : 0xfffb8000 - 0xfffff000   ( 284 kB)
| KERNEL:     vmalloc : 0xc8800000 - 0xfffb6000   ( 887 MB)
| KERNEL:     lowmem  : 0xc0000000 - 0xc8000000   ( 128 MB)
| KERNEL:       .init : 0xc02f0000 - 0xc0326000   ( 216 kB)
| KERNEL:       .data : 0xc0272c2b - 0xc02ec258   ( 485 kB)
| KERNEL:       .text : 0xc0100000 - 0xc0272c2b   (1483 kB)
| KERNEL: Checking if this processor honours the WP bit even in supervisor mode...Ok.
| KERNEL: CPA: page pool initialized 1 of 1 pages preallocated
| KERNEL: Calibrating delay loop... 121.65 BogoMIPS (lpj=608256)
| KERNEL: Mount-cache hash table entries: 512
| KERNEL: CPU: 486
| KERNEL: Checking 'hlt' instruction... OK.
| KERNEL: Freeing SMP alternatives: 0k freed
| KERNEL: net_namespace: 256 bytes
| KERNEL: NET: Registered protocol family 16
| KERNEL: PCI: Using configuration type 1 for base access
| KERNEL: ACPI: Interpreter disabled.
| KERNEL: Linux Plug and Play Support v0.97 (c) Adam Belay
| KERNEL: pnp: PnP ACPI: disabled
| KERNEL: PnPBIOS: Scanning system for PnP BIOS support...
| KERNEL: PnPBIOS: Found PnP BIOS installation structure at 0xc00f2b40
| KERNEL: PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x350a, dseg 0xf0000
| KERNEL: PNPBIOS fault.. attempting recovery.
| KERNEL: PnPBIOS: Warning! Your PnP BIOS caused a fatal error. Attempting to continue
| KERNEL: PnPBIOS: You may need to reboot with the "pnpbios=off" option to operate stably
| KERNEL: PnPBIOS: Check with your vendor for an updated BIOS
| KERNEL: PnPBIOS: get_dev_node: unexpected status 0x28
| KERNEL: PnPBIOS: 6 nodes reported by PnP BIOS; 6 recorded by driver
| KERNEL: PCI: Probing PCI hardware
| KERNEL: PCI: Probing PCI hardware (bus 00)
| KERNEL: PCI: 0000:00:03.0 reg 10 32bit mmio: [f8000000, fbffffff]
| KERNEL: PCI: 0000:00:03.0 reg 14 32bit mmio: [fefc0000, feffffff]
| KERNEL: PCI: 0000:00:03.0 reg 18 io port: [ef80, efff]
| KERNEL: pci 0000:00:03.0: supports D1
| KERNEL: pci 0000:00:03.0: supports D2
| KERNEL: PCI: 0000:00:08.0 reg 10 io port: [ee00, eeff]
| KERNEL: PCI: 0000:00:08.0 reg 14 32bit mmio: [fefbb400, fefbb4ff]
| KERNEL: PCI: 0000:00:0a.0 reg 10 32bit mmio: [e0000, e0fff]
| KERNEL: PCI: 0000:00:0a.1 reg 10 32bit mmio: [e2000, e20ff]
| KERNEL: PCI: 0000:00:0b.0 reg 10 32bit mmio: [e1000, e1fff]
| KERNEL: PCI: 0000:00:0b.1 reg 10 32bit mmio: [e2100, e21ff]
| KERNEL: pci 0000:00:07.0: default IRQ router [17f3/6031]
| KERNEL: pci 0000:00:0a.0: BAR 0: can't allocate resource
| KERNEL: pci 0000:00:0a.1: BAR 0: can't allocate resource
| KERNEL: pci 0000:00:0b.0: BAR 0: can't allocate resource
| KERNEL: pci 0000:00:0b.1: BAR 0: can't allocate resource
| KERNEL: system 00:00: iomem range 0x0-0x9fbff could not be reserved
| KERNEL: system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
| KERNEL: system 00:00: iomem range 0xe0000-0xfffff could not be reserved
| KERNEL: system 00:00: iomem range 0x100000-0x7ffffff could not be reserved
| KERNEL: system 00:00: iomem range 0xff000000-0xffffffff could not be reserved
| KERNEL: bus: 00 index 0 io port: [0, ffff]
| KERNEL: bus: 00 index 1 mmio: [0, ffffffff]
| KERNEL: NET: Registered protocol family 2
| KERNEL: IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
| KERNEL: TCP established hash table entries: 4096 (order: 3, 32768 bytes)
| KERNEL: TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
| KERNEL: TCP: Hash tables configured (established 4096 bind 4096)
| KERNEL: TCP reno registered
| KERNEL: NET: Registered protocol family 1
| KERNEL: Freeing initrd memory: 1652k freed
| KERNEL: msgmni has been set to 247
| KERNEL: io scheduler noop registered
| KERNEL: io scheduler deadline registered (default)
| KERNEL: pci 0000:00:03.0: Boot video device
| KERNEL: isapnp: Scanning for PnP cards...
| KERNEL: isapnp: No Plug & Play device found
| KERNEL: brd: module loaded
| KERNEL: PNP: PS/2 Controller [PNP0303] at 0x60,0x64 irq 1
| KERNEL: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
| KERNEL: serio: i8042 KBD port at 0x60,0x64 irq 1
| KERNEL: mice: PS/2 mouse device common for all mice
| KERNEL: input: PC Speaker as /devices/platform/pcspkr/input/input0
| KERNEL: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
| KERNEL: TCP cubic registered
| KERNEL: NET: Registered protocol family 17
| KERNEL: Using IPI Shortcut mode
| KERNEL: RAMDISK: cramfs filesystem found at block 0
| KERNEL: RAMDISK: Loading 1652KiB [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\done.
| KERNEL: VFS: Mounted root (cramfs filesystem) readonly.
| KERNEL: Freeing unused kernel memory: 216k freed
| pfac: Ok, PID 208.
| initrd: WTware PRO shell, v.4.5.15
| initrd: Kernel command line: root=/dev/ram0 ramdisk_blocksize=4096 ramdisk_size=8192 quiet initrd=wtshell/wtshell BOOT_IMAGE=wtshell/bzImage
| .
| initrd: Ethernet boot.
| initrd: Kernel: 2.6.27, modules in /lib/modules/2.6.27.
| initrd: PCIID: 17f3:6021 sub 0000:0000, class 0x0600.
| initrd: PCIID: 18ca:0020 sub 18ca:0020, class 0x0300.
| initrd: PCIID: 17f3:6031 sub 0000:3210, class 0x0601.
| initrd: PCIID: 17f3:6040 sub 0000:0000, class 0x0200.
| initrd: PCIID: 17f3:6060 sub 0000:0000, class 0x0c03.
| initrd: PCIID: 17f3:6061 sub 0000:0000, class 0x0c03.
| initrd: PCIID: 17f3:6060 sub 0000:0000, class 0x0c03.
| initrd: PCIID: 17f3:6061 sub 0000:0000, class 0x0c03.
| initrd: PCIID, network: 17f3:6040.
| initrd: PCIID, VGA: 18ca:0020.
| initrd: RAM: 127136Kb total, 115112Kb free.
| initrd: Force USB hub driver.
| initrd: Loading usb bus driver.
| initrd: +--- Executing "/sbin/insmod usbcore"
| KERNEL: usbcore: registered new interface driver usbfs
| KERNEL: usbcore: registered new interface driver hub
| KERNEL: usbcore: registered new device driver usb
| initrd: +- Errorlevel: 0, output:
| initrd: +------------------------
| initrd: +--- Executing "/sbin/insmod uhci-hcd"
| KERNEL: USB Universal Host Controller Interface driver v3.0
| initrd: +- Errorlevel: 0, output:
| initrd: +------------------------
| initrd: +--- Executing "/sbin/insmod ohci-hcd"
| KERNEL: ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
| KERNEL: ohci_hcd 0000:00:0a.0: OHCI Host Controller
| KERNEL: ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 1
| KERNEL: ohci_hcd 0000:00:0a.0: irq 15, io mem 0x10000000
| KERNEL: usb usb1: configuration #1 chosen from 1 choice
| KERNEL: hub 1-0:1.0: USB hub found
| KERNEL: hub 1-0:1.0: 2 ports detected
| KERNEL: ohci_hcd 0000:00:0b.0: OHCI Host Controller
| KERNEL: ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
| KERNEL: ohci_hcd 0000:00:0b.0: irq 9, io mem 0x10001000
| KERNEL: usb usb2: configuration #1 chosen from 1 choice
| KERNEL: usb 1-1: new full speed USB device using ohci_hcd and address 2
| KERNEL: hub 2-0:1.0: USB hub found
| KERNEL: hub 2-0:1.0: 2 ports detected
| KERNEL: usb 1-1: configuration #1 chosen from 1 choice
| initrd: +- Errorlevel: 0, output:
| | Using /lib/modules/2.6.27/kernel/drivers/usb/host/ohci-hcd.ko
| initrd: +------------------------
| initrd: +--- Executing "/sbin/insmod ehci-hcd"
| KERNEL: usb 2-1: new low speed USB device using ohci_hcd and address 2
| KERNEL: ehci_hcd 0000:00:0a.1: EHCI Host Controller
| KERNEL: ehci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 3
| KERNEL: ehci_hcd 0000:00:0a.1: irq 5, io mem 0x10002000
| KERNEL: ehci_hcd 0000:00:0a.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
| KERNEL: usb usb3: configuration #1 chosen from 1 choice
| KERNEL: hub 3-0:1.0: USB hub found
| KERNEL: hub 3-0:1.0: 2 ports detected
| KERNEL: usb 2-1: configuration #1 chosen from 1 choice
| KERNEL: usb 1-1: USB disconnect, address 2
| KERNEL: ehci_hcd 0000:00:0b.1: EHCI Host Controller
| KERNEL: ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 4
| KERNEL: ehci_hcd 0000:00:0b.1: irq 10, io mem 0x10002100
| KERNEL: ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
| KERNEL: usb usb4: configuration #1 chosen from 1 choice
| KERNEL: hub 4-0:1.0: USB hub found
| KERNEL: hub 4-0:1.0: 2 ports detected
| KERNEL: usb 2-1: USB disconnect, address 2
| initrd: +- Errorlevel: 0, output:
| initrd: +------------------------
| KERNEL: usb 1-1: new full speed USB device using ohci_hcd and address 3
| KERNEL: usb 1-1: configuration #1 chosen from 1 choice
| KERNEL: usb 2-1: new low speed USB device using ohci_hcd and address 3
| KERNEL: usb 2-1: configuration #1 chosen from 1 choice
| +--- FILE "/proc/bus/usb/devices" -----------------------
| | T:  Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 2
| | B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
| | D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
| | P:  Vendor=1d6b ProdID=0002 Rev= 2.06
| | S:  Manufacturer=Linux 2.6.27 ehci_hcd
| | S:  Product=EHCI Host Controller
| | S:  SerialNumber=0000:00:0b.1
| | C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
| | I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
| | E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms
| | T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 2
| | B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
| | D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
| | P:  Vendor=1d6b ProdID=0002 Rev= 2.06
| | S:  Manufacturer=Linux 2.6.27 ehci_hcd
| | S:  Product=EHCI Host Controller
| | S:  SerialNumber=0000:00:0a.1
| | C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
| | I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
| | E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms
| | T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
| | B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
| | D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
| | P:  Vendor=1d6b ProdID=0001 Rev= 2.06
| | S:  Manufacturer=Linux 2.6.27 ohci_hcd
| | S:  Product=OHCI Host Controller
| | S:  SerialNumber=0000:00:0b.0
| | C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
| | I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
| | E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
| | T:  Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  3 Spd=1.5 MxCh= 0
| | D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
| | P:  Vendor=0458 ProdID=003a Rev= 1.00
| | S:  Manufacturer=Genius
| | S:  Product=Optical Mouse
| | C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
| | I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=02 Driver=(none)
| | E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=10ms
| | T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
| | B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
| | D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
| | P:  Vendor=1d6b ProdID=0001 Rev= 2.06
| | S:  Manufacturer=Linux 2.6.27 ohci_hcd
| | S:  Product=OHCI Host Controller
| | S:  SerialNumber=0000:00:0a.0
| | C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
| | I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
| | E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
| | T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  3 Spd=12  MxCh= 0
| | D:  Ver= 1.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
| | P:  Vendor=0b0b ProdID=106e Rev= 3.04
| | S:  Manufacturer=Datamax
| | S:  Product=E4304
| | C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=100mA
| | I:* If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=(none)
| | E:  Ad=81(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
| | E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
| +----------------------------------------------------
| initrd: Found USB device 1d6b:0002.
| initrd: Found USB device 1d6b:0002.
| initrd: Found USB device 1d6b:0001.
| initrd: Found USB device 0458:003a.
| initrd: Found USB mouse.
| initrd: Found USB device 1d6b:0001.
| initrd: Found USB device 0b0b:106e.
| initrd: Loading USB HID driver.
| initrd: +--- Executing "/sbin/insmod usbhid"
| KERNEL: input: Genius Optical Mouse as /devices/pci0000:00/0000:00:0b.0/usb2/2-1/2-1:1.0/input/input2
| KERNEL: input: USB HID v1.10 Mouse [Genius Optical Mouse] on usb-0000:00:0b.0-1
| KERNEL: usbcore: registered new interface driver usbhid
| KERNEL: usbhid: v2.6:USB HID core driver
| initrd: +- Errorlevel: 0, output:
| initrd: +------------------------
| initrd: Loading ethernet drivers.
| initrd: +--- Executing "/sbin/modprobe r6040"
| KERNEL: r6040: RDC R6040 net driver, version 0.17 (13Apr2007)
| KERNEL: r6040: RDC R6040 net driver, version 0.17 (13Apr2007)
| initrd: +- Errorlevel: 0, output:
| initrd: +------------------------
| initrd: NIC module r6040.ko loaded.
| initrd: +--- Executing "/sbin/udhcpc --script=/sbin/dhcpCB --quit --now --interface=eth0"
| dhcpCB: DHCP command: deconfig.
| dhcpCB: DHCP command: bound.
| dhcpCB: DHCP server: 192.168.0.1.
| dhcpCB: Interface: "eth0".
| dhcpCB: IP: 192.168.0.38.
| dhcpCB: Netmask: 255.255.255.0.
| dhcpCB: TFTP server: 192.168.0.99.
| dhcpCB: Boot file: "pxelinux.0".
| dhcpCB: TFTP prefix: "".
| dhcpCB: DNS: 192.168.0.1.
| dhcpCB: Default gateway: 192.168.0.1.
| initrd: +- Errorlevel: 0, output:
| initrd: +------------------------
| +--- FILE "/etc/resolv.conf" -----------------------
| | nameserver 192.168.0.1
| +----------------------------------------------------
| initrd: Trying to download file "configs/list.wtc" from TFTP server "192.168.0.99".
| initrd: Error code 1: File not found.
| initrd: Trying to download file "configs/00.1B.EB.20.00.C6.wtc" from TFTP server "192.168.0.99".
| initrd: Trying to download file "configs/all.wtc" from TFTP server "192.168.0.99".
| initrd: Error code 1: File not found.
| initrd: Trying to download file "all.wtc" from TFTP server "192.168.0.99".
| initrd: Error code 1: File not found.
| initrd: Trying to download file "wtware.lic" from TFTP server "192.168.0.99".
| initrd: WHOLE CONFIG FILE:
| +--- FILE "/tmp/cfg" -----------------------
| | win2kip=192.168.0.113
| | video=sisfb(f)
| | resolution=1024x768
| | bpp=16
| | refresh=60
| | mouse_wheel = on
| | com1 = on
| | com2 = on
| | com3 = usb-serial
| | printer = usb
| | user=
| | #password =12345678
| | rdpcompression = on
| | keyswitch = alt-shift
| | mouse_accel_mult = 2
| | usbdisk = on
| | syslog = 192.168.0.99
| | #
| | #    DOS-.  
| | #   Notepad    " > "
| | #  "Terminal".
| | #
| | #
| | #   䠩 ᪫뢠 業  ନ. 
| | # 業 室 㯠  죨, ஡ :
| | #
| | # http://wtware.ru/buy.html
| | #
| | #
| | # 業  ஢,  ࠭祭  ६,
| | #  ᯫ⭮ ,  :
| | #
| | # http://wtware.ru/download.html
| | #
| | #
| | # 業 WTware ⮨   ப,  㦭 
| | #  ७   䠩. ஡  業
| | # ⠩ :
| | #
| | # http://wtware.ru/licensing/terms.html
| | #
| +----------------------------------------------------
| initrd: Read config file.
| initrd: Found parameter "win2kip" with value = "192.168.0.113".
| initrd: Found parameter "video" with value = "sisfb(f)".
| initrd: Found parameter "resolution" with value = "1024x768".
| initrd: Found parameter "bpp" with value = "16".
| initrd: Found parameter "refresh" with value = "60".
| initrd: Found parameter "mouse_wheel" with value = "on".
| initrd: Found parameter "com1" with value = "on".
| initrd: Found parameter "com2" with value = "on".
| initrd: Found parameter "com3" with value = "usb-serial".
| initrd: Found parameter "printer" with value = "usb".
| initrd: Found parameter "user" with value = "".
| initrd: Found parameter "rdpcompression" with value = "on".
| initrd: Found parameter "keyswitch" with value = "alt-shift".
| initrd: Found parameter "mouse_accel_mult" with value = "2".
| initrd: Found parameter "usbdisk" with value = "on".
| initrd: Found parameter "syslog" with value = "192.168.0.99".
| initrd: Use DOS (alt, 866) codepage for config file.
| initrd: Hostname: "wtw001BEB2000C6".
| initrd: User [], display_name [], domain [], password empty.
| initrd: Using video driver SIS/XGI.
| initrd: +--- Executing "/sbin/udhcpc --script=/sbin/dhcpCB --quit --now --interface=eth0 --hostname=wtw001BEB2000C6 --request=192.168.0.38"
| dhcpCB: DHCP command: deconfig.
| dhcpCB: DHCP command: bound.
| dhcpCB: DHCP server: 192.168.0.1.
| dhcpCB: Interface: "eth0".
| dhcpCB: IP: 192.168.0.38.
| dhcpCB: Netmask: 255.255.255.0.
| dhcpCB: TFTP server: 192.168.0.99.
| dhcpCB: Boot file: "pxelinux.0".
| dhcpCB: TFTP prefix: "".
| dhcpCB: DNS: 192.168.0.1.
| dhcpCB: Default gateway: 192.168.0.1.
| initrd: +- Errorlevel: 0, output:
| initrd: +------------------------
| +--- FILE "/etc/resolv.conf" -----------------------
| | nameserver 192.168.0.1
| +----------------------------------------------------
| Got config from initrd.
+----------------------------------------------------
initrd: Loading VFAT filesystem driver.
initrd: +--- Executing "/sbin/insmod nls_base"
initrd: +- Errorlevel: 0, output:
| Using /lib/modules/2.6.27/kernel/fs/nls/nls_base.ko
initrd: +------------------------
initrd: +--- Executing "/sbin/insmod fat"
initrd: +- Errorlevel: 0, output:
| Using /lib/modules/2.6.27/kernel/fs/fat/fat.ko
initrd: +------------------------
initrd: +--- Executing "/sbin/insmod vfat"
initrd: +- Errorlevel: 0, output:
initrd: +------------------------
initrd: Loading ISO 9660 CDROM filesystem driver.
initrd: +--- Executing "/sbin/insmod nls_base"
initrd: +- Errorlevel: 1, output:
initrd: +------------------------
initrd: +--- Executing "/sbin/insmod udf"
initrd: +- Errorlevel: 1, output:
initrd: +------------------------
initrd: +--- Executing "/sbin/insmod isofs"
initrd: +- Errorlevel: 0, output:
| Using /lib/modules/2.6.27/kernel/fs/isofs/isofs.ko
initrd: +------------------------
initrd: Loading UTF8 charset.
initrd: +--- Executing "/sbin/insmod nls_base"
initrd: +- Errorlevel: 1, output:
initrd: +------------------------
initrd: +--- Executing "/sbin/insmod nls_cp866"
initrd: +- Errorlevel: 0, output:
| Using /lib/modules/2.6.27/kernel/fs/nls/nls_cp866.ko
initrd: +------------------------
initrd: +--- Executing "/sbin/insmod nls_utf8"
initrd: +- Errorlevel: 0, output:
| Using /lib/modules/2.6.27/kernel/fs/nls/nls_utf8.ko
initrd: +------------------------
initrd: Loading usb storage driver.
initrd: +--- Executing "/sbin/insmod scsi_mod"
KERNEL: SCSI subsystem initialized
initrd: +- Errorlevel: 0, output:
initrd: +------------------------
initrd: +--- Executing "/sbin/insmod ide-core"
KERNEL: Uniform Multi-Platform E-IDE driver
initrd: +- Errorlevel: 0, output:
initrd: +------------------------
initrd: +--- Executing "/sbin/insmod usb-storage"
KERNEL: Initializing USB Mass Storage driver...
KERNEL: usbcore: registered new interface driver usb-storage
KERNEL: USB Mass Storage support registered.
initrd: +- Errorlevel: 0, output:
initrd: +------------------------
initrd: +--- Executing "/sbin/insmod sd_mod"
KERNEL: Driver 'sd' needs updating - please use bus_type methods
initrd: +- Errorlevel: 0, output:
| Using /lib/modules/2.6.27/kernel/drivers/scsi/sd_mod.ko
initrd: +------------------------
initrd: +--- Executing "/sbin/insmod cdrom"
initrd: +- Errorlevel: 0, output:
| Using /lib/modules/2.6.27/kernel/drivers/cdrom/cdrom.ko
initrd: +------------------------
initrd: +--- Executing "/sbin/modprobe sr_mod"
KERNEL: Driver 'sr' needs updating - please use bus_type methods
initrd: +- Errorlevel: 0, output:
initrd: +------------------------
initrd: Loading serial port driver.
initrd: +--- Executing "/sbin/modprobe 8250_pnp"
KERNEL: Serial: 8250/16550 driver4 ports, IRQ sharing enabled
KERNEL: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
KERNEL: serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
initrd: +- Errorlevel: 0, output:
initrd: +------------------------
initrd: +--- Executing "/sbin/modprobe parport_serial"
initrd: +- Errorlevel: 0, output:
initrd: +------------------------
initrd: Loading usb <-> serial bridges drivers.
initrd: +--- Executing "/sbin/insmod usbserial"
KERNEL: usbcore: registered new interface driver usbserial
KERNEL: usbserial: USB Serial Driver core
initrd: +- Errorlevel: 0, output:
initrd: +------------------------
initrd: +--- Executing "/sbin/insmod pl2303"
KERNEL: usbserial: USB Serial support registered for pl2303
KERNEL: usbcore: registered new interface driver pl2303
KERNEL: pl2303: Prolific PL2303 USB to serial adaptor driver
initrd: +- Errorlevel: 0, output:
initrd: +------------------------
initrd: +--- Executing "/sbin/insmod ftdi_sio"
KERNEL: usbserial: USB Serial support registered for FTDI USB Serial Device
KERNEL: usbcore: registered new interface driver ftdi_sio
KERNEL: ftdi_sio: v1.4.3:USB FTDI Serial Converters Driver
initrd: +- Errorlevel: 0, output:
initrd: +------------------------
initrd: +--- Executing "/sbin/insmod cp2101"
KERNEL: usbserial: USB Serial support registered for cp2101
KERNEL: usbcore: registered new interface driver cp2101
KERNEL: cp2101: Silicon Labs CP2101/CP2102 RS232 serial adaptor driver v0.07
initrd: +- Errorlevel: 0, output:
| Using /lib/modules/2.6.27/kernel/drivers/usb/serial/cp2101.ko
initrd: +------------------------
initrd: Trying to download file "packages/wtpprint.pkg" from TFTP server "192.168.0.99".
initrd: Loading usb printer driver.
initrd: +--- Executing "/sbin/insmod usblp"
KERNEL: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x0B0B pid 0x106E
KERNEL: usbcore: registered new interface driver usblp
initrd: +- Errorlevel: 0, output:
initrd: +------------------------
initrd: Trying to download file "packages/wtpf.pkg" from TFTP server "192.168.0.99".
initrd: Trying to download file "graphic/menu.gif" from TFTP server "192.168.0.99".
initrd: Error code 1: File not found.
initrd: Trying to download file "graphic/pleasewait.gif" from TFTP server "192.168.0.99".
initrd: Error code 1: File not found.
initrd: Trying to download file "graphic/popup.gif" from TFTP server "192.168.0.99".
initrd: Error code 1: File not found.
init: WTware PRO second shell, v.4.5.15
pfac: Got command line /sbin/printer 0.
printer: Printserver, WTware PRO v.4.5.15
printer: Printserver 0, device /dev/lpUSB0, listen at port 9100.
pfac: Ok, PID 403.
init: New mode: 1024x768, 16 bit, 60 Hz, modeline "".
init: +--- Executing "/sbin/modprobe fbcon"
init: +- Errorlevel: 0, output:
init: +------------------------
init: /sbin/modprobe sisfb mode=1024x768x16 rate=60
init: +--- Executing "/sbin/modprobe sisfb mode=1024x768x16 rate=60"
KERNEL: sisfb: Video ROM found
KERNEL: sisfb: Video RAM at 0xf8000000, mapped to 0xc8a00000, size 32768k
KERNEL: sisfb: MMIO at 0xfefc0000, mapped to 0xcaa80000, size 256k
KERNEL: sisfb: Memory heap starting at 32544K, size 32K
KERNEL: sisfb: CRT1 DDC supported
KERNEL: sisfb: CRT1 DDC level: 2 
KERNEL: sisfb: Monitor range H 30-60KHz, V 56-75Hz, Max. dotclock 80MHz
KERNEL: sisfb: Default mode is 1024x768x16 (60Hz)
KERNEL: sisfb: Initial vbflags 0x0
KERNEL: sisfb: Failed to add MTRRs
KERNEL: fbcon: XGI Z7 (fb0) is primary device
KERNEL: Console: switching to colour frame buffer device 128x48
KERNEL: sisfb: 2D acceleration is enabled, y-panning enabled (auto-max)
KERNEL: fb0: XGI Z7 frame buffer device version 1.8.9
KERNEL: sisfb: Copyright (C) 2001-2005 Thomas Winischhofer
init: +- Errorlevel: 0, output:
init: +------------------------
init: Kernel framebuffer module loaded.
init: Framebuffer device found.
init: xres 1024, xres_virtual 1024, yres 768, yres_virtual 16272, bits_per_pixel 16
init: VSI.pixclock 15384, sync 00000000
init: left_margin 160, right_margin 24, hsync_len 136
init: upper_margin 29, lower_margin 3, vsync_len 6
init: Framebuffer videomode: 1024x768-16@60.
init: LINELENBYTES 2048
init: VLEN 1572864
init: Allocate 1572864 bytes of shared memory for backscreen, 801 bytes for dirty buffer.
init: Backscreen shared mem Id 00000000.
init: Dirty buffer shared mem Id 00008001.
init: Shared memory for backscreen b7cbd000.
init: Shared memory for dirty buffer b7ff5000.
init: Total free ram: 113332 KB.
init: Bitmap cache sizes:  base number: 1729.
init: Free ram after buffers allocation: 81300 KB.
init: Free ram just before session: 85548 Kb.
init: RDP: connecting to "192.168.0.113":3389
init: Kernel default buffer 87380 bytes.
init: TCP/IP connection with 192.168.0.113:3389 established
pfac: Got command line /sbin/rdpdr[serial] 0.
pfac: Ok, PID 445.
rdpdr[serial]: RDP Serial Port Redirector, WTware PRO v.4.5.15.
init: Send configuration to daemon.
pfac: Got command line /sbin/rdpdr[serial] 1.
pfac: Ok, PID 446.
rdpdr[serial]: RDP Serial Port Redirector, WTware PRO v.4.5.15.
init: Send configuration to daemon.
pfac: Got command line /sbin/rdpdr[serial] 8.
rdpdr[serial]: RDP Serial Port Redirector, WTware PRO v.4.5.15.
init: Send configuration to daemon.
init: Make RDP session
init:  username ""
init:  password empty
init:  domain ""
init:  shell ""
init:  directory ""
init:  video 1024x768@16
init:  pflags 0000006F
init:  keyboard 00000409:00000000
init:  hostname "wtw001BEB2000C6"
init:  ipaddr "192.168.0.38"
init: RDP4 encryption (NT4, XP, 2000 and 2003 in remote administration mode).
init: RC4 key 128 bit.
init: Iteration, free RAM 85364 Kb
pfac: Ok, PID 447.
init: Iteration, free RAM 85336 Kb
init: Iteration, free RAM 85308 Kb
init: Iteration, free RAM 85288 Kb
init: Iteration, free RAM 85176 Kb
printer: Printer USB ID 0b0b:106e
KERNEL: usblp0: nonzero read bulk status received: -62
init: Iteration, free RAM 85148 Kb
KERNEL: usblp0: nonzero write bulk status received: -62
printer:       printer-main.c (  242),    processConnection: -- ERROR -- Failed to write data to printer. Errno 5 (n 3856).
printer: Close printer device.
printer: Printer USB ID 0b0b:106e
KERNEL: usblp0: nonzero read bulk status received: -62
KERNEL: usblp0: nonzero write bulk status received: -62
printer:       printer-main.c (  242),    processConnection: -- ERROR -- Failed to write data to printer. Errno 5 (n 823).
printer: Close printer device.
KERNEL: usb 1-1: USB disconnect, address 3
KERNEL: usblp0: removed
printer:       printer-main.c (  161),    processConnection: -- ERROR -- Failed to open printer device (/dev/lpUSB0).
printer: Printer device not found. Waiting...
KERNEL: usb 1-1: new full speed USB device using ohci_hcd and address 4
KERNEL: usb 1-1: configuration #1 chosen from 1 choice
KERNEL: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x0B0B pid 0x106E
KERNEL: usb 1-1: USB disconnect, address 4
KERNEL: usblp0: removed
KERNEL: usb 1-1: new full speed USB device using ohci_hcd and address 5
KERNEL: usb 1-1: configuration #1 chosen from 1 choice
KERNEL: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x0B0B pid 0x106E
printer: Printer USB ID 0b0b:106e
KERNEL: usblp0: nonzero read bulk status received: -62
KERNEL: usblp0: nonzero write bulk status received: -62
printer:       printer-main.c (  242),    processConnection: -- ERROR -- Failed to write data to printer. Errno 5 (n 823).
printer: Close printer device.
printer: Printer USB ID 0b0b:106e
KERNEL: usblp0: nonzero read bulk status received: -62
KERNEL: usblp0: nonzero write bulk status received: -62
printer:       printer-main.c (  242),    processConnection: -- ERROR -- Failed to write data to printer. Errno 5 (n 1498).
printer: Close printer device.
KERNEL: usb 1-1: USB disconnect, address 5
KERNEL: usblp0: removed
KERNEL: usb 1-1: new full speed USB device using ohci_hcd and address 6
KERNEL: usb 1-1: configuration #1 chosen from 1 choice
KERNEL: usblp0: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x0B0B pid 0x106E
printer: Printer USB ID 0b0b:106e
KERNEL: usblp0: nonzero read bulk status received: -62
KERNEL: usblp0: nonzero write bulk status received: -62
printer:       printer-main.c (  242),    processConnection: -- ERROR -- Failed to write data to printer. Errno 5 (n 1498).
printer: Close printer device.
printer: Printer USB ID 0b0b:106e
KERNEL: usblp0: nonzero read bulk status received: -62
KERNEL: usb 1-1: USB disconnect, address 6
printer:       printer-main.c (  242),    processConnection: -- ERROR -- Failed to write data to printer. Errno 19 (n 2).
printer: Close printer device.
KERNEL: usblp0: removed
printer: Printer device not found. Waiting...
KERNEL: usb 1-1: new full speed USB device using ohci_hcd and address 7
KERNEL: usb 1-1: configuration #1 chosen from 1 choice
KERNEL: usblp0: USB Bidirectional printer dev 7 if 0 alt 0 proto 2 vid 0x0B0B pid 0x106E
KERNEL: usb 1-1: USB disconnect, address 7
KERNEL: usblp0: removed
KERNEL: usb 1-1: new full speed USB device using ohci_hcd and address 8
KERNEL: usb 1-1: configuration #1 chosen from 1 choice
KERNEL: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x0B0B pid 0x106E
printer: Printer USB ID 0b0b:106e
KERNEL: usblp0: nonzero read bulk status received: -62
KERNEL: usblp0: nonzero write bulk status received: -62
printer:       printer-main.c (  242),    processConnection: -- ERROR -- Failed to write data to printer. Errno 5 (n 1498).
printer: Close printer device.
printer: Printer USB ID 0b0b:106e
KERNEL: usblp0: nonzero read bulk status received: -62
KERNEL: usblp0: nonzero write bulk status received: -62
printer:       printer-main.c (  242),    processConnection: -- ERROR -- Failed to write data to printer. Errno 5 (n 1498).
printer: Close printer device.
KERNEL: usblp0: nonzero read bulk status received: -62
printer: Printer USB ID 0b0b:106e
KERNEL: usblp0: nonzero write bulk status received: -62
printer:       printer-main.c (  242),    processConnection: -- ERROR -- Failed to write data to printer. Errno 5 (n 3412).
printer: Close printer device.
printer: Printer USB ID 0b0b:106e
KERNEL: usblp0: nonzero read bulk status received: -62
KERNEL: usblp0: nonzero write bulk status received: -62
printer:       printer-main.c (  242),    processConnection: -- ERROR -- Failed to write data to printer. Errno 5 (n 4024).
printer: Close printer device.
printer: Printer USB ID 0b0b:106e
KERNEL: usblp0: nonzero read bulk status received: -62
KERNEL: usb 1-1: USB disconnect, address 8
KERNEL: usb 1-1: new full speed USB device using ohci_hcd and address 9
KERNEL: usb 1-1: configuration #1 chosen from 1 choice
KERNEL: usblp0: USB Bidirectional printer dev 9 if 0 alt 0 proto 2 vid 0x0B0B pid 0x106E
printer:       printer-main.c (  242),    processConnection: -- ERROR -- Failed to write data to printer. Errno 19 (n 38).
printer: Close printer device.
KERNEL: usblp0: removed
KERNEL: usb 1-1: USB disconnect, address 9
KERNEL: usblp0: removed
KERNEL: usb 1-1: new full speed USB device using ohci_hcd and address 10
KERNEL: usb 1-1: configuration #1 chosen from 1 choice
KERNEL: usblp0: USB Bidirectional printer dev 10 if 0 alt 0 proto 2 vid 0x0B0B pid 0x106E
KERNEL: usb 1-1: USB disconnect, address 10
KERNEL: usblp0: removed
KERNEL: usb 1-1: new full speed USB device using ohci_hcd and address 11
KERNEL: usb 1-1: configuration #1 chosen from 1 choice
KERNEL: usblp0: USB Bidirectional printer dev 11 if 0 alt 0 proto 2 vid 0x0B0B pid 0x106E
KERNEL: usb 1-1: USB disconnect, address 11
KERNEL: usblp0: removed
KERNEL: usb 1-1: new full speed USB device using ohci_hcd and address 12
KERNEL: usb 1-1: configuration #1 chosen from 1 choice
KERNEL: usblp0: USB Bidirectional printer dev 12 if 0 alt 0 proto 2 vid 0x0B0B pid 0x106E
printer: Printer USB ID 0b0b:106e
KERNEL: usblp0: nonzero read bulk status received: -62
KERNEL: usblp0: nonzero write bulk status received: -62
printer:       printer-main.c (  242),    processConnection: -- ERROR -- Failed to write data to printer. Errno 5 (n 4024).
printer: Close printer device.
KERNEL: usblp0: nonzero read bulk status received: -62
printer: Printer USB ID 0b0b:106e
KERNEL: usblp0: nonzero write bulk status received: -62
printer:       printer-main.c (  242),    processConnection: -- ERROR -- Failed to write data to printer. Errno 5 (n 69).
printer: Close printer device.
KERNEL: usb 1-1: USB disconnect, address 12
KERNEL: usblp0: removed
KERNEL: usb 1-1: new full speed USB device using ohci_hcd and address 13
KERNEL: usb 1-1: configuration #1 chosen from 1 choice
KERNEL: usblp0: USB Bidirectional printer dev 13 if 0 alt 0 proto 2 vid 0x0B0B pid 0x106E
