[TFTP] Got RRQ, 31 bytes.
[TFTP] 00000000: 35 2e 31 2e 31 5c 77 74 77 61 72 65 2e 70 78 65
[TFTP] 00000010: 00 6f 63 74 65 74 00 74 73 69 7a 65 00 30 00
[TFTP] Requests file "5.1.1\wtware.pxe". Tsize is requested, blksize default.
[TFTP] Sending OASK (tsize 16282).
[TFTP] Received opcode 5.
[TFTP] 00000000: 00 05 00 00 54 46 54 50 20 41 62 6f 72 74 65 64
[TFTP] 00000010: 00
[TFTP] Got RRQ, 36 bytes.
[TFTP] 00000000: 35 2e 31 2e 31 5c 77 74 77 61 72 65 2e 70 78 65
[TFTP] 00000010: 00 6f 63 74 65 74 00 62 6c 6b 73 69 7a 65 00 31
[TFTP] 00000020: 34 35 36 00
[TFTP] Request block size 1456, forced to 1240.
[TFTP] Requests file "5.1.1\wtware.pxe". Tsize is not requested, blksize 1240 bytes.
[TFTP] Sending OASK (blksize 1240).
[TFTP] Transfer of file "5.1.1\wtware.pxe" completed.
[TFTP] Connection closed.
[TFTP] Got RRQ, 70 bytes.
[TFTP] 00000000: 35 2e 31 2e 31 5c 65 65 30 33 64 65 61 30 2d 37
[TFTP] 00000010: 34 34 63 2d 31 31 65 30 2d 61 66 38 39 2d 65 30
[TFTP] 00000020: 36 39 39 35 38 38 34 63 37 32 00 6f 63 74 65 74
[TFTP] 00000030: 00 74 73 69 7a 65 00 30 00 62 6c 6b 73 69 7a 65
[TFTP] 00000040: 00 31 34 30 38 00
[TFTP] Request block size 1408, forced to 1240.
[TFTP] Requests file "5.1.1\ee03dea0-744c-11e0-af89-e06995884c72". Tsize is requested, blksize 1240 bytes.
[TFTP] Requested file "C:\Program Files\WTware\TFTPDROOT\5.1.1\ee03dea0-744c-11e0-af89-e06995884c72" not found.
[TFTP] Got RRQ, 54 bytes.
[TFTP] 00000000: 35 2e 31 2e 31 5c 30 31 2d 65 30 2d 36 39 2d 39
[TFTP] 00000010: 35 2d 38 38 2d 34 63 2d 37 32 00 6f 63 74 65 74
[TFTP] 00000020: 00 74 73 69 7a 65 00 30 00 62 6c 6b 73 69 7a 65
[TFTP] 00000030: 00 31 34 30 38 00
[TFTP] Request block size 1408, forced to 1240.
[TFTP] Requests file "5.1.1\01-e0-69-95-88-4c-72". Tsize is requested, blksize 1240 bytes.
[TFTP] Requested file "C:\Program Files\WTware\TFTPDROOT\5.1.1\01-e0-69-95-88-4c-72" not found.
[TFTP] Got RRQ, 42 bytes.
[TFTP] 00000000: 35 2e 31 2e 31 5c 30 41 33 33 30 31 31 34 00 6f
[TFTP] 00000010: 63 74 65 74 00 74 73 69 7a 65 00 30 00 62 6c 6b
[TFTP] 00000020: 73 69 7a 65 00 31 34 30 38 00
[TFTP] Request block size 1408, forced to 1240.
[TFTP] Requests file "5.1.1\0A330114". Tsize is requested, blksize 1240 bytes.
[TFTP] Requested file "C:\Program Files\WTware\TFTPDROOT\5.1.1\0A330114" not found.
[TFTP] Got RRQ, 41 bytes.
[TFTP] 00000000: 35 2e 31 2e 31 5c 30 41 33 33 30 31 31 00 6f 63
[TFTP] 00000010: 74 65 74 00 74 73 69 7a 65 00 30 00 62 6c 6b 73
[TFTP] 00000020: 69 7a 65 00 31 34 30 38 00
[TFTP] Request block size 1408, forced to 1240.
[TFTP] Requests file "5.1.1\0A33011". Tsize is requested, blksize 1240 bytes.
[TFTP] Requested file "C:\Program Files\WTware\TFTPDROOT\5.1.1\0A33011" not found.
[TFTP] Got RRQ, 40 bytes.
[TFTP] 00000000: 35 2e 31 2e 31 5c 30 41 33 33 30 31 00 6f 63 74
[TFTP] 00000010: 65 74 00 74 73 69 7a 65 00 30 00 62 6c 6b 73 69
[TFTP] 00000020: 7a 65 00 31 34 30 38 00
[TFTP] Request block size 1408, forced to 1240.
[TFTP] Requests file "5.1.1\0A3301". Tsize is requested, blksize 1240 bytes.
[TFTP] Requested file "C:\Program Files\WTware\TFTPDROOT\5.1.1\0A3301" not found.
[TFTP] Got RRQ, 39 bytes.
[TFTP] 00000000: 35 2e 31 2e 31 5c 30 41 33 33 30 00 6f 63 74 65
[TFTP] 00000010: 74 00 74 73 69 7a 65 00 30 00 62 6c 6b 73 69 7a
[TFTP] 00000020: 65 00 31 34 30 38 00
[TFTP] Request block size 1408, forced to 1240.
[TFTP] Requests file "5.1.1\0A330". Tsize is requested, blksize 1240 bytes.
[TFTP] Requested file "C:\Program Files\WTware\TFTPDROOT\5.1.1\0A330" not found.
[TFTP] Got RRQ, 38 bytes.
[TFTP] 00000000: 35 2e 31 2e 31 5c 30 41 33 33 00 6f 63 74 65 74
[TFTP] 00000010: 00 74 73 69 7a 65 00 30 00 62 6c 6b 73 69 7a 65
[TFTP] 00000020: 00 31 34 30 38 00
[TFTP] Request block size 1408, forced to 1240.
[TFTP] Requests file "5.1.1\0A33". Tsize is requested, blksize 1240 bytes.
[TFTP] Requested file "C:\Program Files\WTware\TFTPDROOT\5.1.1\0A33" not found.
[TFTP] Got RRQ, 37 bytes.
[TFTP] 00000000: 35 2e 31 2e 31 5c 30 41 33 00 6f 63 74 65 74 00
[TFTP] 00000010: 74 73 69 7a 65 00 30 00 62 6c 6b 73 69 7a 65 00
[TFTP] 00000020: 31 34 30 38 00
[TFTP] Request block size 1408, forced to 1240.
[TFTP] Requests file "5.1.1\0A3". Tsize is requested, blksize 1240 bytes.
[TFTP] Requested file "C:\Program Files\WTware\TFTPDROOT\5.1.1\0A3" not found.
[TFTP] Got RRQ, 36 bytes.
[TFTP] 00000000: 35 2e 31 2e 31 5c 30 41 00 6f 63 74 65 74 00 74
[TFTP] 00000010: 73 69 7a 65 00 30 00 62 6c 6b 73 69 7a 65 00 31
[TFTP] 00000020: 34 30 38 00
[TFTP] Request block size 1408, forced to 1240.
[TFTP] Requests file "5.1.1\0A". Tsize is requested, blksize 1240 bytes.
[TFTP] Requested file "C:\Program Files\WTware\TFTPDROOT\5.1.1\0A" not found.
[TFTP] Got RRQ, 35 bytes.
[TFTP] 00000000: 35 2e 31 2e 31 5c 30 00 6f 63 74 65 74 00 74 73
[TFTP] 00000010: 69 7a 65 00 30 00 62 6c 6b 73 69 7a 65 00 31 34
[TFTP] 00000020: 30 38 00
[TFTP] Request block size 1408, forced to 1240.
[TFTP] Requests file "5.1.1\0". Tsize is requested, blksize 1240 bytes.
[TFTP] Requested file "C:\Program Files\WTware\TFTPDROOT\5.1.1\0" not found.
[TFTP] Got RRQ, 41 bytes.
[TFTP] 00000000: 35 2e 31 2e 31 5c 70 78 65 2e 63 66 67 00 6f 63
[TFTP] 00000010: 74 65 74 00 74 73 69 7a 65 00 30 00 62 6c 6b 73
[TFTP] 00000020: 69 7a 65 00 31 34 30 38 00
[TFTP] Request block size 1408, forced to 1240.
[TFTP] Requests file "5.1.1\pxe.cfg". Tsize is requested, blksize 1240 bytes.
[TFTP] Sending OASK (tsize 234, blksize 1240).
[TFTP] Transfer of file "5.1.1\pxe.cfg" completed.
[TFTP] Connection closed.
[TFTP] Got RRQ, 49 bytes.
[TFTP] 00000000: 35 2e 31 2e 31 5c 70 61 63 6b 61 67 65 73 2f 6b
[TFTP] 00000010: 65 72 6e 65 6c 00 6f 63 74 65 74 00 74 73 69 7a
[TFTP] 00000020: 65 00 30 00 62 6c 6b 73 69 7a 65 00 31 34 30 38
[TFTP] 00000030: 00
[TFTP] Request block size 1408, forced to 1240.
[TFTP] Requests file "5.1.1\packages\kernel". Tsize is requested, blksize 1240 bytes.
[TFTP] Sending OASK (tsize 1848144, blksize 1240).
[TFTP] Transfer of file "5.1.1\packages\kernel" completed.
[TFTP] Connection closed.
[TFTP] Got RRQ, 49 bytes.
[TFTP] 00000000: 35 2e 31 2e 31 5c 70 61 63 6b 61 67 65 73 2f 69
[TFTP] 00000010: 6e 69 74 72 64 00 6f 63 74 65 74 00 74 73 69 7a
[TFTP] 00000020: 65 00 30 00 62 6c 6b 73 69 7a 65 00 31 34 30 38
[TFTP] 00000030: 00
[TFTP] Request block size 1408, forced to 1240.
[TFTP] Requests file "5.1.1\packages\initrd". Tsize is requested, blksize 1240 bytes.
[TFTP] Sending OASK (tsize 5155784, blksize 1240).
[TFTP] Transfer of file "5.1.1\packages\initrd" completed.
[TFTP] Connection closed.
[TFTP] Timeout occured while transfer "5.1.1\wtware.pxe".
[TFTP] Timeout occured while transfer "5.1.1\wtware.pxe".
[TFTP] Got RRQ, 55 bytes.
[TFTP] 00000000: 57 54 77 61 72 65 20 76 2e 35 2e 31 2e 31 20 61
[TFTP] 00000010: 74 20 45 30 3a 36 39 3a 39 35 3a 38 38 3a 34 43
[TFTP] 00000020: 3a 37 32 2c 20 64 68 63 70 3d 31 30 2e 35 31 2e
[TFTP] 00000030: 31 2e 31 30 30 2e 00
[TFTP] WTware v.5.1.1 found at host [], mac E0:69:95:88:4C:72.
[TFTP] Sending WTware TFTP version.
[TFTP] Got RRQ, 37 bytes.
[TFTP] 00000000: 45 76 65 72 79 6f 6e 65 5c 6c 69 73 74 2e 77 74
[TFTP] 00000010: 63 00 6f 63 74 65 74 00 62 6c 6b 73 69 7a 65 00
[TFTP] 00000020: 31 32 30 30 00
[TFTP] Requests file "Everyone\list.wtc". Tsize is not requested, blksize 1200 bytes.
[TFTP] Sending OASK (blksize 1200).
[TFTP] Transfer of file "Everyone\list.wtc" completed.
[TFTP] Connection closed.
[TFTP] Got RRQ, 58 bytes.
[TFTP] 00000000: 54 65 72 6d 69 6e 61 6c 73 5c 45 30 2e 36 39 2e
[TFTP] 00000010: 39 35 2e 38 38 2e 34 43 2e 37 32 5c 63 6f 6e 66
[TFTP] 00000020: 69 67 2e 77 74 63 00 6f 63 74 65 74 00 62 6c 6b
[TFTP] 00000030: 73 69 7a 65 00 31 32 30 30 00
[TFTP] Requests file "Terminals\E0.69.95.88.4C.72\config.wtc". Tsize is not requested, blksize 1200 bytes.
[TFTP] Requested file "C:\Documents and Settings\All Users\Application Data\WTware\Terminals\E0.69.95.88.4C.72\config.wtc" not found.
[TFTP] Got RRQ, 51 bytes.
[TFTP] 00000000: 54 65 72 6d 69 6e 61 6c 73 5c 45 30 2e 36 39 2e
[TFTP] 00000010: 39 35 2e 38 38 2e 34 43 2e 37 32 2e 77 74 63 00
[TFTP] 00000020: 6f 63 74 65 74 00 62 6c 6b 73 69 7a 65 00 31 32
[TFTP] 00000030: 30 30 00
[TFTP] Requests file "Terminals\E0.69.95.88.4C.72.wtc". Tsize is not requested, blksize 1200 bytes.
[TFTP] Requested file "C:\Documents and Settings\All Users\Application Data\WTware\Terminals\E0.69.95.88.4C.72.wtc" not found.
[TFTP] Got RRQ, 41 bytes.
[TFTP] 00000000: 54 65 72 6d 69 6e 61 6c 73 5c 64 65 66 61 75 6c
[TFTP] 00000010: 74 2e 77 74 63 00 6f 63 74 65 74 00 62 6c 6b 73
[TFTP] 00000020: 69 7a 65 00 31 32 30 30 00
[TFTP] Requests file "Terminals\default.wtc". Tsize is not requested, blksize 1200 bytes.
[TFTP] Requested file "C:\Documents and Settings\All Users\Application Data\WTware\Terminals\default.wtc" not found.
[TFTP] Got RRQ, 36 bytes.
[TFTP] 00000000: 45 76 65 72 79 6f 6e 65 5c 61 6c 6c 2e 77 74 63
[TFTP] 00000010: 00 6f 63 74 65 74 00 62 6c 6b 73 69 7a 65 00 31
[TFTP] 00000020: 32 30 30 00
[TFTP] Requests file "Everyone\all.wtc". Tsize is not requested, blksize 1200 bytes.
[TFTP] Sending OASK (blksize 1200).
[TFTP] Transfer of file "Everyone\all.wtc" completed.
[TFTP] Connection closed.
[TFTP] Got RRQ, 39 bytes.
[TFTP] 00000000: 45 76 65 72 79 6f 6e 65 5c 77 74 77 61 72 65 2e
[TFTP] 00000010: 6c 69 63 00 6f 63 74 65 74 00 62 6c 6b 73 69 7a
[TFTP] 00000020: 65 00 31 32 30 30 00
[TFTP] Requests file "Everyone\wtware.lic". Tsize is not requested, blksize 1200 bytes.
[TFTP] Sending OASK (blksize 1200).
[TFTP] Transfer of file "Everyone\wtware.lic" completed.
[TFTP] Connection closed.
[TFTP] Timeout occured while transfer "5.1.1\wtware.pxe".
[TFTP] Connection closed.
WTware 5.1.1 supervisor.
WTC listener active.
WTC broadcast listener active.
HTTPd listener active.
[KERNEL] Linux version 3.2.1 (root@c2) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #1 PREEMPT Tue Jan 17 20:34:29 MSK 2012
[KERNEL] KERNEL supported cpus:
[KERNEL]   Intel GenuineIntel
[KERNEL]   AMD AuthenticAMD
[KERNEL]   NSC Geode by NSC
[KERNEL]   Cyrix CyrixInstead
[KERNEL]   Centaur CentaurHauls
[KERNEL]   Transmeta GenuineTMx86
[KERNEL]   Transmeta TransmetaCPU
[KERNEL]   UMC UMC UMC UMC
[KERNEL] BIOS-provided physical RAM map:
[KERNEL]  BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
[KERNEL]  BIOS-e820: 000000000008f000 - 0000000000090000 (reserved)
[KERNEL]  BIOS-e820: 0000000000090000 - 000000000009ec00 (usable)
[KERNEL]  BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[KERNEL]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[KERNEL]  BIOS-e820: 0000000000100000 - 000000007ee98000 (usable)
[KERNEL]  BIOS-e820: 000000007ee98000 - 000000007eebf000 (reserved)
[KERNEL]  BIOS-e820: 000000007eebf000 - 000000007ef57000 (usable)
[KERNEL]  BIOS-e820: 000000007ef57000 - 000000007efbf000 (ACPI NVS)
[KERNEL]  BIOS-e820: 000000007efbf000 - 000000007eff1000 (usable)
[KERNEL]  BIOS-e820: 000000007eff1000 - 000000007efff000 (ACPI data)
[KERNEL]  BIOS-e820: 000000007efff000 - 000000007f000000 (usable)
[KERNEL]  BIOS-e820: 000000007f000000 - 0000000080000000 (reserved)
[KERNEL]  BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[KERNEL]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[KERNEL] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[KERNEL] DMI 2.5 present.
[KERNEL] DMI:                  /D425KT, BIOS MWPNT10N.86A.0069.2010.0913.1432 09/13/2010
[KERNEL] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[KERNEL] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[KERNEL] last_pfn = 0x7f000 max_arch_pfn = 0x100000
[KERNEL] MTRR default type: uncachable
[KERNEL] MTRR fixed ranges enabled:
[KERNEL]   00000-9FFFF write-back
[KERNEL]   A0000-BFFFF uncachable
[KERNEL]   C0000-DFFFF write-protect
[KERNEL]   E0000-FFFFF uncachable
[KERNEL] MTRR variable ranges enabled:
[KERNEL]   0 base 000000000 mask F80000000 write-back
[KERNEL]   1 base 07F000000 mask FFF000000 uncachable
[KERNEL]   2 base 0FFFF0000 mask FFFFF0000 write-protect
[KERNEL]   3 base 0FFF10000 mask FFFFF0000 write-protect
[KERNEL]   4 base 0FFF20000 mask FFFFF0000 write-protect
[KERNEL]   5 disabled
[KERNEL]   6 disabled
[KERNEL] Warning only 895MB will be used.
[KERNEL] Use a HIGHMEM enabled kernel.
[KERNEL] initial memory mapped : 0 - 00800000
[KERNEL] Base memory trampoline at [c009a000] 9a000 size 12288
[KERNEL] init_memory_mapping: 0000000000000000-0000000037fa0000
[KERNEL]  0000000000 - 0000400000 page 4k
[KERNEL]  0000400000 - 0037c00000 page 2M
[KERNEL]  0037c00000 - 0037fa0000 page 4k
[KERNEL] kernel direct mapping tables up to 37fa0000 @ 7fb000-800000
[KERNEL] early_memtest: # of tests: 1
[KERNEL]   0000010000 - 000008f000 pattern 0000000000000000
[KERNEL]   0000090000 - 000009a000 pattern 0000000000000000
[KERNEL]   000009d000 - 000009d800 pattern 0000000000000000
[KERNEL]   000046d162 - 00007fb000 pattern 0000000000000000
[KERNEL]   00007fc000 - 0037fa0000 pattern 0000000000000000
[KERNEL] RAMDISK: 7e98c000 - 7ee77000
[KERNEL] Allocated new RAMDISK: 37ab5000 - 37f9fbc8
[KERNEL] Move RAMDISK from 000000007e98c000 - 000000007ee76bc7 to 37ab5000 - 37f9fbc7
[KERNEL] ACPI: RSDP 000f2130 00024 (v02 INTEL )
[KERNEL] ACPI: XSDT 7effe120 0004C (v01 INTEL  D425KT   00000045      01000013)
[KERNEL] ACPI: FACP 7effd000 000F4 (v03 INTEL  D425KT   00000045 MSFT 0100000D)
[KERNEL] ACPI: DSDT 7eff9000 03796 (v01 INTEL  D425KT   00000045 MSFT 0100000D)
[KERNEL] ACPI: FACS 7ef97000 00040
[KERNEL] ACPI: APIC 7eff8000 00084 (v02 INTEL  D425KT   00000045 MSFT 0100000D)
[KERNEL] ACPI: MCFG 7eff7000 0003C (v01 INTEL  D425KT   00000045 MSFT 0100000D)
[KERNEL] ACPI: HPET 7eff6000 00038 (v01 INTEL  D425KT   00000045 MSFT 0100000D)
[KERNEL] ACPI: SSDT 7eff2000 0377C (v01 INTEL  D425KT   00000045 MSFT 0100000D)
[KERNEL] ACPI: Local APIC address 0xfee00000
[KERNEL] 895MB LOWMEM available.
[KERNEL]   mapped low ram: 0 - 37fa0000
[KERNEL]   low ram: 0 - 37fa0000
[KERNEL] Zone PFN ranges:
[KERNEL]   DMA      0x00000010 -> 0x00001000
[KERNEL]   Normal   0x00001000 -> 0x00037fa0
[KERNEL] Movable zone start PFN for each node
[KERNEL] early_node_map[3] active PFN ranges
[KERNEL]     0: 0x00000010 -> 0x0000008f
[KERNEL]     0: 0x00000090 -> 0x0000009e
[KERNEL]     0: 0x00000100 -> 0x00037fa0
[KERNEL] On node 0 totalpages: 229165
[KERNEL] free_area_init_node: node 0, pgdat c03e9240, node_mem_map f73b5200
[KERNEL]   DMA zone: 32 pages used for memmap
[KERNEL]   DMA zone: 0 pages reserved
[KERNEL]   DMA zone: 3949 pages, LIFO batch:0
[KERNEL]   Normal zone: 1760 pages used for memmap
[KERNEL]   Normal zone: 223424 pages, LIFO batch:31
[KERNEL] Using APIC driver default
[KERNEL] ACPI: PM-Timer IO Port: 0x408
[KERNEL] ACPI: Local APIC address 0xfee00000
[KERNEL] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[KERNEL] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[KERNEL] ACPI: NR_CPUS/possible_cpus limit of 1 reached.  Processor 1/0x1 ignored.
[KERNEL] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
[KERNEL] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
[KERNEL] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[KERNEL] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[KERNEL] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[KERNEL] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[KERNEL] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[KERNEL] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[KERNEL] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[KERNEL] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[KERNEL] ACPI: IRQ0 used by override.
[KERNEL] ACPI: IRQ2 used by override.
[KERNEL] ACPI: IRQ9 used by override.
[KERNEL] Using ACPI (MADT) for SMP configuration information
[KERNEL] nr_irqs_gsi: 40
[KERNEL] Allocating PCI resources starting at 80000000 (gap: 80000000:78000000)
[KERNEL] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[KERNEL] pcpu-alloc: [0] 0 
[KERNEL] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 227373
[KERNEL] Kernel command line: root=/dev/ram0 ramdisk_blocksize=4096 ramdisk_size=16384 memtest=1 quiet initrd=packages/initrd BOOT_IMAGE=packages/kernel 
[KERNEL] PID hash table entries: 4096 (order: 2, 16384 bytes)
[KERNEL] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[KERNEL] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[KERNEL] Initializing CPU#0
[KERNEL] Memory: 900092k/917120k available (2228k kernel code, 16568k reserved, 762k data, 296k init, 0k highmem)
[KERNEL] virtual kernel memory layout:
[KERNEL]     fixmap  : 0xfffa2000 - 0xfffff000   ( 372 kB)
[KERNEL]     vmalloc : 0xf87a0000 - 0xfffa0000   ( 120 MB)
[KERNEL]     lowmem  : 0xc0000000 - 0xf7fa0000   ( 895 MB)
[KERNEL]       .init : 0xc03ec000 - 0xc0436000   ( 296 kB)
[KERNEL]       .data : 0xc032d231 - 0xc03eba40   ( 762 kB)
[KERNEL]       .text : 0xc0100000 - 0xc032d231   (2228 kB)
[KERNEL] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[KERNEL] NR_IRQS:2304 nr_irqs:256 16
[KERNEL] CPU 0 irqstacks, hard=f6c08000 soft=f6c0a000
[KERNEL] Extended CMOS year: 2000
[KERNEL] Console: colour VGA+ 80x25
[KERNEL] console [tty0] enabled
[KERNEL] Fast TSC calibration failed
[KERNEL] TSC: PIT calibration matches PMTIMER. 1 loops
[KERNEL] Detected 1800.054 MHz processor.
[KERNEL] Calibrating delay loop (skipped), value calculated using timer frequency.. 3600.10 BogoMIPS (lpj=1800054)
[KERNEL] pid_max: default: 32768 minimum: 301
[KERNEL] Mount-cache hash table entries: 512
[KERNEL] using mwait in idle threads.
[KERNEL] CPU: Intel(R) Atom(TM) CPU D425   @ 1.80GHz stepping 0a
[KERNEL] ACPI: Core revision 20110623
[KERNEL] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
[KERNEL] ... version:                3
[KERNEL] ... bit width:              40
[KERNEL] ... generic registers:      2
[KERNEL] ... value mask:             000000ffffffffff
[KERNEL] ... max period:             000000007fffffff
[KERNEL] ... fixed-purpose events:   3
[KERNEL] ... event mask:             0000000700000003
[KERNEL] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[KERNEL] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[KERNEL] NET: Registered protocol family 16
[KERNEL] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[KERNEL] ACPI: bus type pci registered
[KERNEL] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[KERNEL] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[KERNEL] PCI: Using MMCONFIG for extended config space
[KERNEL] PCI: Using configuration type 1 for base access
[KERNEL] bio: create slab <bio-0> at 0
[KERNEL] ACPI: Added _OSI(Module Device)
[KERNEL] ACPI: Added _OSI(Processor Device)
[KERNEL] ACPI: Added _OSI(3.0 _SCP Extensions)
[KERNEL] ACPI: Added _OSI(Processor Aggregator Device)
[KERNEL] ACPI: EC: Look up EC in DSDT
[KERNEL] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[KERNEL] ACPI: Interpreter enabled
[KERNEL] ACPI: (supports S0 S1 S3 S5)
[KERNEL] ACPI: Using IOAPIC for interrupt routing
[KERNEL] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[KERNEL] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[KERNEL] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
[KERNEL] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
[KERNEL] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[KERNEL] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xf7ffffff]
[KERNEL] pci 0000:00:00.0: [8086:a000] type 0 class 0x000600
[KERNEL] pci 0000:00:02.0: [8086:a001] type 0 class 0x000300
[KERNEL] pci 0000:00:02.0: reg 10: [mem 0xe0300000-0xe037ffff]
[KERNEL] pci 0000:00:02.0: reg 14: [io  0x30c0-0x30c7]
[KERNEL] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff pref]
[KERNEL] pci 0000:00:02.0: reg 1c: [mem 0xe0200000-0xe02fffff]
[KERNEL] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[KERNEL] pci 0000:00:1b.0: reg 10: [mem 0xe0380000-0xe0383fff 64bit]
[KERNEL] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[KERNEL] pci 0000:00:1b.0: PME# disabled
[KERNEL] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[KERNEL] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[KERNEL] pci 0000:00:1c.0: PME# disabled
[KERNEL] pci 0000:00:1c.1: [8086:27d2] type 1 class 0x000604
[KERNEL] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[KERNEL] pci 0000:00:1c.1: PME# disabled
[KERNEL] pci 0000:00:1c.2: [8086:27d4] type 1 class 0x000604
[KERNEL] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[KERNEL] pci 0000:00:1c.2: PME# disabled
[KERNEL] pci 0000:00:1c.3: [8086:27d6] type 1 class 0x000604
[KERNEL] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[KERNEL] pci 0000:00:1c.3: PME# disabled
[KERNEL] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[KERNEL] pci 0000:00:1d.0: reg 20: [io  0x3080-0x309f]
[KERNEL] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[KERNEL] pci 0000:00:1d.1: reg 20: [io  0x3060-0x307f]
[KERNEL] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[KERNEL] pci 0000:00:1d.2: reg 20: [io  0x3040-0x305f]
[KERNEL] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[KERNEL] pci 0000:00:1d.3: reg 20: [io  0x3020-0x303f]
[KERNEL] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[KERNEL] pci 0000:00:1d.7: reg 10: [mem 0xe0384400-0xe03847ff]
[KERNEL] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[KERNEL] pci 0000:00:1d.7: PME# disabled
[KERNEL] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[KERNEL] pci 0000:00:1f.0: [8086:27bc] type 0 class 0x000601
[KERNEL] pci 0000:00:1f.0: [Firmware Bug]: TigerPoint LPC.BM_STS cleared
[KERNEL] pci 0000:00:1f.2: [8086:27c0] type 0 class 0x000101
[KERNEL] pci 0000:00:1f.2: reg 10: [io  0x30b8-0x30bf]
[KERNEL] pci 0000:00:1f.2: reg 14: [io  0x30cc-0x30cf]
[KERNEL] pci 0000:00:1f.2: reg 18: [io  0x30b0-0x30b7]
[KERNEL] pci 0000:00:1f.2: reg 1c: [io  0x30c8-0x30cb]
[KERNEL] pci 0000:00:1f.2: reg 20: [io  0x30a0-0x30af]
[KERNEL] pci 0000:00:1f.2: reg 24: [mem 0xe0384000-0xe03843ff]
[KERNEL] pci 0000:00:1f.2: PME# supported from D3hot
[KERNEL] pci 0000:00:1f.2: PME# disabled
[KERNEL] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[KERNEL] pci 0000:00:1f.3: reg 20: [io  0x3000-0x301f]
[KERNEL] pci 0000:01:00.0: [10ec:8136] type 0 class 0x000200
[KERNEL] pci 0000:01:00.0: reg 10: [io  0x2000-0x20ff]
[KERNEL] pci 0000:01:00.0: reg 18: [mem 0xe0004000-0xe0004fff 64bit pref]
[KERNEL] pci 0000:01:00.0: reg 20: [mem 0xe0000000-0xe0003fff 64bit pref]
[KERNEL] pci 0000:01:00.0: supports D1 D2
[KERNEL] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[KERNEL] pci 0000:01:00.0: PME# disabled
[KERNEL] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[KERNEL] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[KERNEL] pci 0000:00:1c.0:   bridge window [mem 0xe0000000-0xe00fffff 64bit pref]
[KERNEL] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[KERNEL] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[KERNEL] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[KERNEL] pci 0000:05:00.0: [9710:9865] type 0 class 0x000700
[KERNEL] pci 0000:05:00.0: reg 10: [io  0x1018-0x101f]
[KERNEL] pci 0000:05:00.0: reg 14: [mem 0xe0105000-0xe0105fff]
[KERNEL] pci 0000:05:00.0: reg 20: [mem 0xe0104000-0xe0104fff]
[KERNEL] pci 0000:05:00.0: PME# supported from D0 D3cold
[KERNEL] pci 0000:05:00.0: PME# disabled
[KERNEL] pci 0000:05:00.1: [9710:9865] type 0 class 0x000700
[KERNEL] pci 0000:05:00.1: reg 10: [io  0x1010-0x1017]
[KERNEL] pci 0000:05:00.1: reg 14: [mem 0xe0103000-0xe0103fff]
[KERNEL] pci 0000:05:00.1: reg 20: [mem 0xe0102000-0xe0102fff]
[KERNEL] pci 0000:05:00.1: PME# supported from D0 D3cold
[KERNEL] pci 0000:05:00.1: PME# disabled
[KERNEL] pci 0000:05:00.2: [9710:9865] type 0 class 0x000701
[KERNEL] pci 0000:05:00.2: reg 10: [io  0x1008-0x100f]
[KERNEL] pci 0000:05:00.2: reg 14: [io  0x1000-0x1007]
[KERNEL] pci 0000:05:00.2: reg 18: [mem 0xe0101000-0xe0101fff]
[KERNEL] pci 0000:05:00.2: reg 20: [mem 0xe0100000-0xe0100fff]
[KERNEL] pci 0000:05:00.2: PME# supported from D0 D3cold
[KERNEL] pci 0000:05:00.2: PME# disabled
[KERNEL] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[KERNEL] pci 0000:00:1e.0:   bridge window [io  0x1000-0x1fff]
[KERNEL] pci 0000:00:1e.0:   bridge window [mem 0xe0100000-0xe01fffff]
[KERNEL] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[KERNEL] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[KERNEL] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[KERNEL] pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xf7ffffff] (subtractive decode)
[KERNEL] pci_bus 0000:00: on NUMA node 0
[KERNEL] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[KERNEL] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[KERNEL] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[KERNEL] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[KERNEL] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[KERNEL] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[KERNEL]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x09)
[KERNEL] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[KERNEL] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[KERNEL] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12)
[KERNEL] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[KERNEL] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 *10 11 12)
[KERNEL] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
[KERNEL] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
[KERNEL] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11 12)
[KERNEL] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[KERNEL] vgaarb: loaded
[KERNEL] vgaarb: bridge control possible 0000:00:02.0
[KERNEL] usbcore: registered new interface driver usbfs
[KERNEL] usbcore: registered new interface driver hub
[KERNEL] usbcore: registered new device driver usb
[KERNEL] PCI: Using ACPI for IRQ routing
[KERNEL] PCI: pci_cache_line_size set to 64 bytes
[KERNEL] reserve RAM buffer: 000000000008f000 - 000000000008ffff 
[KERNEL] reserve RAM buffer: 000000000009ec00 - 000000000009ffff 
[KERNEL] reserve RAM buffer: 000000007ee98000 - 000000007fffffff 
[KERNEL] reserve RAM buffer: 000000007ef57000 - 000000007fffffff 
[KERNEL] reserve RAM buffer: 000000007eff1000 - 000000007fffffff 
[KERNEL] reserve RAM buffer: 000000007f000000 - 000000007fffffff 
[KERNEL] pnp: PnP ACPI init
[KERNEL] ACPI: bus type pnp registered
[KERNEL] pnp 00:00: [bus 00-3f]
[KERNEL] pnp 00:00: [io  0x0cf8-0x0cff]
[KERNEL] pnp 00:00: [io  0x0000-0x0cf7 window]
[KERNEL] pnp 00:00: [io  0x0d00-0xffff window]
[KERNEL] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[KERNEL] pnp 00:00: [mem 0xd0000000-0xf7ffffff window]
[KERNEL] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[KERNEL] pnp 00:01: [mem 0xf8000000-0xfbffffff]
[KERNEL] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[KERNEL] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[KERNEL] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[KERNEL] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[KERNEL] pnp 00:01: [mem 0x000c0000-0x000dffff]
[KERNEL] pnp 00:01: [mem 0x000e0000-0x000fffff]
[KERNEL] pnp 00:01: [mem 0xfff00000-0xffffffff]
[KERNEL] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[KERNEL] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[KERNEL] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[KERNEL] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[KERNEL] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[KERNEL] system 00:01: [mem 0x000c0000-0x000dffff] could not be reserved
[KERNEL] system 00:01: [mem 0x000e0000-0x000fffff] could not be reserved
[KERNEL] system 00:01: [mem 0xfff00000-0xffffffff] has been reserved
[KERNEL] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[KERNEL] pnp 00:02: [io  0x0000-0x000f]
[KERNEL] pnp 00:02: [io  0x0081-0x0083]
[KERNEL] pnp 00:02: [io  0x0087]
[KERNEL] pnp 00:02: [io  0x0089-0x008b]
[KERNEL] pnp 00:02: [io  0x008f]
[KERNEL] pnp 00:02: [io  0x00c0-0x00df]
[KERNEL] pnp 00:02: [dma 4]
[KERNEL] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[KERNEL] pnp 00:03: [io  0x0070-0x0071]
[KERNEL] pnp 00:03: [io  0x0074-0x0077]
[KERNEL] pnp 00:03: [irq 8]
[KERNEL] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[KERNEL] pnp 00:04: [io  0x00f0]
[KERNEL] pnp 00:04: [irq 13]
[KERNEL] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[KERNEL] pnp 00:05: [io  0x0061]
[KERNEL] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[KERNEL] pnp 00:06: [io  0x0500-0x053f]
[KERNEL] pnp 00:06: [io  0x0400-0x047f]
[KERNEL] pnp 00:06: [io  0x0092]
[KERNEL] pnp 00:06: [io  0x0680-0x06ff]
[KERNEL] pnp 00:06: [io  0x0010-0x001f]
[KERNEL] pnp 00:06: [io  0x0072-0x0073]
[KERNEL] pnp 00:06: [io  0x0080]
[KERNEL] pnp 00:06: [io  0x0084-0x0086]
[KERNEL] pnp 00:06: [io  0x0088]
[KERNEL] pnp 00:06: [io  0x008c-0x008e]
[KERNEL] pnp 00:06: [io  0x0090-0x009f]
[KERNEL] pnp 00:06: [io  0x0295-0x0296]
[KERNEL] system 00:06: [io  0x0500-0x053f] has been reserved
[KERNEL] system 00:06: [io  0x0400-0x047f] has been reserved
[KERNEL] system 00:06: [io  0x0680-0x06ff] has been reserved
[KERNEL] system 00:06: [io  0x0295-0x0296] has been reserved
[KERNEL] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[KERNEL] pnp 00:07: [io  0x0060]
[KERNEL] pnp 00:07: [io  0x0064]
[KERNEL] pnp 00:07: [irq 1]
[KERNEL] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[KERNEL] pnp 00:08: [io  0x0378-0x037f]
[KERNEL] pnp 00:08: [irq 7]
[KERNEL] pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active)
[KERNEL] pnp 00:09: [io  0x02f8-0x02ff]
[KERNEL] pnp 00:09: [irq 3]
[KERNEL] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[KERNEL] pnp 00:0a: [io  0x03f8-0x03ff]
[KERNEL] pnp 00:0a: [irq 4]
[KERNEL] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[KERNEL] pnp 00:0b: [mem 0xfec00000-0xfec000ff]
[KERNEL] pnp 00:0b: Plug and Play ACPI device, IDs PNP0003 (active)
[KERNEL] pnp 00:0c: [mem 0xfed00000-0xfed03fff]
[KERNEL] pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
[KERNEL] pnp: PnP ACPI: found 13 devices
[KERNEL] ACPI: ACPI bus type pnp unregistered
[KERNEL] Switching to clocksource acpi_pm
[KERNEL] PCI: max bus depth: 1 pci_try_num: 2
[KERNEL] pci 0000:00:1c.3: BAR 8: assigned [mem 0xe0400000-0xe05fffff]
[KERNEL] pci 0000:00:1c.3: BAR 9: assigned [mem 0xe0600000-0xe07fffff 64bit pref]
[KERNEL] pci 0000:00:1c.3: BAR 7: assigned [io  0x4000-0x4fff]
[KERNEL] pci 0000:00:1c.2: BAR 8: assigned [mem 0xe0800000-0xe09fffff]
[KERNEL] pci 0000:00:1c.2: BAR 9: assigned [mem 0xe0a00000-0xe0bfffff 64bit pref]
[KERNEL] pci 0000:00:1c.2: BAR 7: assigned [io  0x5000-0x5fff]
[KERNEL] pci 0000:00:1c.1: BAR 8: assigned [mem 0xe0c00000-0xe0dfffff]
[KERNEL] pci 0000:00:1c.1: BAR 9: assigned [mem 0xe0e00000-0xe0ffffff 64bit pref]
[KERNEL] pci 0000:00:1c.1: BAR 7: assigned [io  0x6000-0x6fff]
[KERNEL] pci 0000:00:1c.0: BAR 8: assigned [mem 0xe1000000-0xe13fffff]
[KERNEL] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[KERNEL] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[KERNEL] pci 0000:00:1c.0:   bridge window [mem 0xe1000000-0xe13fffff]
[KERNEL] pci 0000:00:1c.0:   bridge window [mem 0xe0000000-0xe00fffff 64bit pref]
[KERNEL] pci 0000:00:1c.1: PCI bridge to [bus 02-02]
[KERNEL] pci 0000:00:1c.1:   bridge window [io  0x6000-0x6fff]
[KERNEL] pci 0000:00:1c.1:   bridge window [mem 0xe0c00000-0xe0dfffff]
[KERNEL] pci 0000:00:1c.1:   bridge window [mem 0xe0e00000-0xe0ffffff 64bit pref]
[KERNEL] pci 0000:00:1c.2: PCI bridge to [bus 03-03]
[KERNEL] pci 0000:00:1c.2:   bridge window [io  0x5000-0x5fff]
[KERNEL] pci 0000:00:1c.2:   bridge window [mem 0xe0800000-0xe09fffff]
[KERNEL] pci 0000:00:1c.2:   bridge window [mem 0xe0a00000-0xe0bfffff 64bit pref]
[KERNEL] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[KERNEL] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
[KERNEL] pci 0000:00:1c.3:   bridge window [mem 0xe0400000-0xe05fffff]
[KERNEL] pci 0000:00:1c.3:   bridge window [mem 0xe0600000-0xe07fffff 64bit pref]
[KERNEL] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[KERNEL] pci 0000:00:1e.0:   bridge window [io  0x1000-0x1fff]
[KERNEL] pci 0000:00:1e.0:   bridge window [mem 0xe0100000-0xe01fffff]
[KERNEL] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[KERNEL] pci 0000:00:1c.0: setting latency timer to 64
[KERNEL] pci 0000:00:1c.1: enabling device (0000 -> 0003)
[KERNEL] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[KERNEL] pci 0000:00:1c.1: setting latency timer to 64
[KERNEL] pci 0000:00:1c.2: enabling device (0000 -> 0003)
[KERNEL] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[KERNEL] pci 0000:00:1c.2: setting latency timer to 64
[KERNEL] pci 0000:00:1c.3: enabling device (0000 -> 0003)
[KERNEL] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[KERNEL] pci 0000:00:1c.3: setting latency timer to 64
[KERNEL] pci 0000:00:1e.0: setting latency timer to 64
[KERNEL] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[KERNEL] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[KERNEL] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[KERNEL] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xf7ffffff]
[KERNEL] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[KERNEL] pci_bus 0000:01: resource 1 [mem 0xe1000000-0xe13fffff]
[KERNEL] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xe00fffff 64bit pref]
[KERNEL] pci_bus 0000:02: resource 0 [io  0x6000-0x6fff]
[KERNEL] pci_bus 0000:02: resource 1 [mem 0xe0c00000-0xe0dfffff]
[KERNEL] pci_bus 0000:02: resource 2 [mem 0xe0e00000-0xe0ffffff 64bit pref]
[KERNEL] pci_bus 0000:03: resource 0 [io  0x5000-0x5fff]
[KERNEL] pci_bus 0000:03: resource 1 [mem 0xe0800000-0xe09fffff]
[KERNEL] pci_bus 0000:03: resource 2 [mem 0xe0a00000-0xe0bfffff 64bit pref]
[KERNEL] pci_bus 0000:04: resource 0 [io  0x4000-0x4fff]
[KERNEL] pci_bus 0000:04: resource 1 [mem 0xe0400000-0xe05fffff]
[KERNEL] pci_bus 0000:04: resource 2 [mem 0xe0600000-0xe07fffff 64bit pref]
[KERNEL] pci_bus 0000:05: resource 0 [io  0x1000-0x1fff]
[KERNEL] pci_bus 0000:05: resource 1 [mem 0xe0100000-0xe01fffff]
[KERNEL] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[KERNEL] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
[KERNEL] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[KERNEL] pci_bus 0000:05: resource 7 [mem 0xd0000000-0xf7ffffff]
[KERNEL] NET: Registered protocol family 2
[KERNEL] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[KERNEL] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[KERNEL] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[KERNEL] TCP: Hash tables configured (established 131072 bind 65536)
[KERNEL] TCP reno registered
[KERNEL] UDP hash table entries: 512 (order: 1, 8192 bytes)
[KERNEL] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[KERNEL] NET: Registered protocol family 1
[KERNEL] pci 0000:00:02.0: Boot video device
[KERNEL] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x0f30
[KERNEL] pci 0000:00:1d.0: Performing full reset
[KERNEL] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0030
[KERNEL] pci 0000:00:1d.1: Performing full reset
[KERNEL] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0030
[KERNEL] pci 0000:00:1d.2: Performing full reset
[KERNEL] pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0030
[KERNEL] pci 0000:00:1d.3: Performing full reset
[KERNEL] pci 0000:00:1d.7: EHCI: BIOS handoff
[KERNEL] PCI: CLS 64 bytes, default 64
[KERNEL] Freeing initrd memory: 5036k freed
[KERNEL] ROMFS MTD (C) 2007 Red Hat, Inc.
[KERNEL] msgmni has been set to 1767
[KERNEL] io scheduler noop registered
[KERNEL] io scheduler cfq registered (default)
[KERNEL] pcieport 0000:00:1c.0: setting latency timer to 64
[KERNEL] pcieport 0000:00:1c.1: setting latency timer to 64
[KERNEL] pcieport 0000:00:1c.2: setting latency timer to 64
[KERNEL] pcieport 0000:00:1c.3: setting latency timer to 64
[KERNEL] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input0
[KERNEL] ACPI: Sleep Button [SLPB]
[KERNEL] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[KERNEL] ACPI: Power Button [PWRF]
[KERNEL] Monitor-Mwait will be used to enter C-1 state
[KERNEL] brd: module loaded
[KERNEL] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[KERNEL] ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96
[KERNEL] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[KERNEL] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[KERNEL] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[KERNEL] drivers/usb/core/inode.c: creating file 'devices'
[KERNEL] drivers/usb/core/inode.c: creating file '001'
[KERNEL] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[KERNEL] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8
[KERNEL] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr
[KERNEL] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[KERNEL] ehci_hcd 0000:00:1d.7: debug port 1
[KERNEL] ehci_hcd 0000:00:1d.7: reset command 0080032 (park)=0 ithresh=8 Async Periodic period=1024 Reset HALT
[KERNEL] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[KERNEL] ehci_hcd 0000:00:1d.7: supports USB remote wakeup
[KERNEL] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe0384400
[KERNEL] ehci_hcd 0000:00:1d.7: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[KERNEL] ehci_hcd 0000:00:1d.7: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[KERNEL] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[KERNEL] usb usb1: default language 0x0409
[KERNEL] usb usb1: udev 1, busnum 1, minor = 0
[KERNEL] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[KERNEL] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[KERNEL] usb usb1: Product: EHCI Host Controller
[KERNEL] usb usb1: Manufacturer: Linux 3.2.1 ehci_hcd
[KERNEL] usb usb1: SerialNumber: 0000:00:1d.7
[KERNEL] usb usb1: usb_probe_device
[KERNEL] usb usb1: configuration #1 chosen from 1 choice
[KERNEL] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[KERNEL] hub 1-0:1.0: usb_probe_interface
[KERNEL] hub 1-0:1.0: usb_probe_interface - got id
[KERNEL] hub 1-0:1.0: USB hub found
[KERNEL] hub 1-0:1.0: 8 ports detected
[KERNEL] hub 1-0:1.0: standalone hub
[KERNEL] hub 1-0:1.0: no power switching (usb 1.0)
[KERNEL] hub 1-0:1.0: individual port over-current protection
[KERNEL] hub 1-0:1.0: power on to power good time: 20ms
[KERNEL] hub 1-0:1.0: local power source is good
[KERNEL] hub 1-0:1.0: trying to enable port power on non-switchable hub
[KERNEL] drivers/usb/core/inode.c: creating file '001'
[KERNEL] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[KERNEL] ohci_hcd: block sizes: ed 64 td 64
[KERNEL] uhci_hcd: USB Universal Host Controller Interface driver
[KERNEL] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[KERNEL] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[KERNEL] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[KERNEL] drivers/usb/core/inode.c: creating file '002'
[KERNEL] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[KERNEL] uhci_hcd 0000:00:1d.0: detected 2 ports
[KERNEL] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000
[KERNEL] uhci_hcd 0000:00:1d.0: Performing full reset
[KERNEL] uhci_hcd 0000:00:1d.0: supports USB remote wakeup
[KERNEL] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080
[KERNEL] usb usb2: default language 0x0409
[KERNEL] usb usb2: udev 1, busnum 2, minor = 128
[KERNEL] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[KERNEL] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[KERNEL] usb usb2: Product: UHCI Host Controller
[KERNEL] usb usb2: Manufacturer: Linux 3.2.1 uhci_hcd
[KERNEL] usb usb2: SerialNumber: 0000:00:1d.0
[KERNEL] usb usb2: usb_probe_device
[KERNEL] usb usb2: configuration #1 chosen from 1 choice
[KERNEL] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[KERNEL] hub 2-0:1.0: usb_probe_interface
[KERNEL] hub 2-0:1.0: usb_probe_interface - got id
[KERNEL] hub 2-0:1.0: USB hub found
[KERNEL] hub 2-0:1.0: 2 ports detected
[KERNEL] hub 2-0:1.0: standalone hub
[KERNEL] hub 2-0:1.0: no power switching (usb 1.0)
[KERNEL] hub 2-0:1.0: individual port over-current protection
[KERNEL] hub 2-0:1.0: power on to power good time: 2ms
[KERNEL] hub 2-0:1.0: local power source is good
[KERNEL] hub 2-0:1.0: trying to enable port power on non-switchable hub
[KERNEL] drivers/usb/core/inode.c: creating file '001'
[KERNEL] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.0
[KERNEL] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[KERNEL] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[KERNEL] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[KERNEL] drivers/usb/core/inode.c: creating file '003'
[KERNEL] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[KERNEL] uhci_hcd 0000:00:1d.1: detected 2 ports
[KERNEL] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000
[KERNEL] uhci_hcd 0000:00:1d.1: Performing full reset
[KERNEL] uhci_hcd 0000:00:1d.1: supports USB remote wakeup
[KERNEL] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060
[KERNEL] usb usb3: default language 0x0409
[KERNEL] usb usb3: udev 1, busnum 3, minor = 256
[KERNEL] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[KERNEL] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[KERNEL] usb usb3: Product: UHCI Host Controller
[KERNEL] usb usb3: Manufacturer: Linux 3.2.1 uhci_hcd
[KERNEL] usb usb3: SerialNumber: 0000:00:1d.1
[KERNEL] usb usb3: usb_probe_device
[KERNEL] usb usb3: configuration #1 chosen from 1 choice
[KERNEL] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[KERNEL] hub 3-0:1.0: usb_probe_interface
[KERNEL] hub 3-0:1.0: usb_probe_interface - got id
[KERNEL] hub 3-0:1.0: USB hub found
[KERNEL] hub 3-0:1.0: 2 ports detected
[KERNEL] hub 3-0:1.0: standalone hub
[KERNEL] hub 3-0:1.0: no power switching (usb 1.0)
[KERNEL] hub 3-0:1.0: individual port over-current protection
[KERNEL] hub 3-0:1.0: power on to power good time: 2ms
[KERNEL] hub 3-0:1.0: local power source is good
[KERNEL] hub 3-0:1.0: trying to enable port power on non-switchable hub
[KERNEL] drivers/usb/core/inode.c: creating file '001'
[KERNEL] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.1
[KERNEL] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[KERNEL] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[KERNEL] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[KERNEL] drivers/usb/core/inode.c: creating file '004'
[KERNEL] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[KERNEL] uhci_hcd 0000:00:1d.2: detected 2 ports
[KERNEL] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000
[KERNEL] uhci_hcd 0000:00:1d.2: Performing full reset
[KERNEL] uhci_hcd 0000:00:1d.2: supports USB remote wakeup
[KERNEL] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040
[KERNEL] usb usb4: default language 0x0409
[KERNEL] usb usb4: udev 1, busnum 4, minor = 384
[KERNEL] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[KERNEL] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[KERNEL] usb usb4: Product: UHCI Host Controller
[KERNEL] usb usb4: Manufacturer: Linux 3.2.1 uhci_hcd
[KERNEL] usb usb4: SerialNumber: 0000:00:1d.2
[KERNEL] usb usb4: usb_probe_device
[KERNEL] usb usb4: configuration #1 chosen from 1 choice
[KERNEL] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[KERNEL] hub 4-0:1.0: usb_probe_interface
[KERNEL] hub 4-0:1.0: usb_probe_interface - got id
[KERNEL] hub 4-0:1.0: USB hub found
[KERNEL] hub 4-0:1.0: 2 ports detected
[KERNEL] hub 4-0:1.0: standalone hub
[KERNEL] hub 4-0:1.0: no power switching (usb 1.0)
[KERNEL] hub 4-0:1.0: individual port over-current protection
[KERNEL] hub 4-0:1.0: power on to power good time: 2ms
[KERNEL] hub 4-0:1.0: local power source is good
[KERNEL] hub 4-0:1.0: trying to enable port power on non-switchable hub
[KERNEL] drivers/usb/core/inode.c: creating file '001'
[KERNEL] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.2
[KERNEL] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[KERNEL] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[KERNEL] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[KERNEL] drivers/usb/core/inode.c: creating file '005'
[KERNEL] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[KERNEL] uhci_hcd 0000:00:1d.3: detected 2 ports
[KERNEL] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000
[KERNEL] uhci_hcd 0000:00:1d.3: Performing full reset
[KERNEL] uhci_hcd 0000:00:1d.3: supports USB remote wakeup
[KERNEL] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00003020
[KERNEL] usb usb5: default language 0x0409
[KERNEL] usb usb5: udev 1, busnum 5, minor = 512
[KERNEL] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[KERNEL] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[KERNEL] usb usb5: Product: UHCI Host Controller
[KERNEL] usb usb5: Manufacturer: Linux 3.2.1 uhci_hcd
[KERNEL] usb usb5: SerialNumber: 0000:00:1d.3
[KERNEL] usb usb5: usb_probe_device
[KERNEL] usb usb5: configuration #1 chosen from 1 choice
[KERNEL] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[KERNEL] hub 5-0:1.0: usb_probe_interface
[KERNEL] hub 5-0:1.0: usb_probe_interface - got id
[KERNEL] hub 5-0:1.0: USB hub found
[KERNEL] hub 5-0:1.0: 2 ports detected
[KERNEL] hub 5-0:1.0: standalone hub
[KERNEL] hub 5-0:1.0: no power switching (usb 1.0)
[KERNEL] hub 5-0:1.0: individual port over-current protection
[KERNEL] hub 5-0:1.0: power on to power good time: 2ms
[KERNEL] hub 5-0:1.0: local power source is good
[KERNEL] hub 5-0:1.0: trying to enable port power on non-switchable hub
[KERNEL] drivers/usb/core/inode.c: creating file '001'
[KERNEL] ehci_hcd 0000:00:1d.7: HS companion for 0000:00:1d.3
[KERNEL] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[KERNEL] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[KERNEL] serio: i8042 KBD port at 0x60,0x64 irq 1
[KERNEL] mousedev: PS/2 mouse device common for all mice
[KERNEL] input: PC Speaker as /devices/platform/pcspkr/input/input2
[KERNEL] cpuidle: using governor ladder
[KERNEL] usbcore: registered new interface driver usbhid
[KERNEL] usbhid: USB HID core driver
[KERNEL] TCP cubic registered
[KERNEL] NET: Registered protocol family 17
[KERNEL] Using IPI Shortcut mode
[KERNEL] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[KERNEL] RAMDISK: lzo image found at block 0
[KERNEL] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0000
[KERNEL] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
[KERNEL] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[KERNEL] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
[KERNEL] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
[KERNEL] VFS: Mounted root (romfs filesystem) readonly on device 1:0.
[KERNEL] Freeing unused kernel memory: 296k freed
[KERNEL] Write protecting the kernel text: 2232k
[KERNEL] Write protecting the kernel read-only data: 636k
[pfac] Ok, PID 405.
[initrd] WTware shell v.5.1.1
[initrd] PCI: 8086:a000 Intel Corporation N10 Family DMI Bridge.
[initrd] PCI: 8086:a001 Intel Corporation N10 Family Integrated Graphics Controller.
[initrd] PCI: C 03 8086:27d8 Display controller Intel Corporation N10/ICH 7 Family High Definition Audio Controller.
[initrd] PCI: C 04 8086:27d0 Multimedia controller Intel Corporation N10/ICH 7 Family PCI Express Port 1.
[initrd] PCI: C 04 8086:27d2 Multimedia controller Intel Corporation N10/ICH 7 Family PCI Express Port 2.
[initrd] PCI: C 04 8086:27d4 Multimedia controller Intel Corporation N10/ICH 7 Family PCI Express Port 3.
[initrd] PCI: C 04 8086:27d6 Multimedia controller Intel Corporation N10/ICH 7 Family PCI Express Port 4.
[initrd] PCI: C 03 8086:27c8 Display controller Intel Corporation N10/ICH 7 Family USB UHCI Controller.
[initrd] PCI: C 03 8086:27c9 Display controller Intel Corporation N10/ICH 7 Family USB UHCI Controller.
[initrd] PCI: C 03 8086:27ca Display controller Intel Corporation N10/ICH 7 Family USB UHCI Controller.
[initrd] PCI: C 03 8086:27cb Display controller Intel Corporation N10/ICH 7 Family USB UHCI Controller.
[initrd] PCI: C 03:20 8086:27cc Display controller Intel Corporation N10/ICH 7 Family USB2 EHCI Controller.
[initrd] PCI: C 04:01 8086:2448 Multimedia controller Multimedia audio controller Intel Corporation 82801 Mobile PCI Bridge.
[initrd] PCI: C 01 8086:27bc Mass storage controller Intel Corporation NM10 Family LPC Controller.
[initrd] PCI: C 01:8f 8086:27c0 Mass storage controller Intel Corporation N10/ICH7 Family SATA IDE Controller.
[initrd] PCI: C 05 8086:27da Memory controller Intel Corporation N10/ICH 7 Family SMBus Controller.
[initrd] PCI: 10ec:8136 Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller.
[initrd] PCI: :02 9710:9865 NetMos Technology PCI 9865 Multi-I/O Controller.
[initrd] PCI: C 01:03 9710:9865 Mass storage controller IPI bus controller NetMos Technology PCI 9865 Multi-I/O Controller.
/--- FILE "/proc/bus/usb/devices" -----------------------
| T:  Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12   MxCh= 2
| B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
| D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
| P:  Vendor=1d6b ProdID=0001 Rev= 3.02
| S:  Manufacturer=Linux 3.2.1 uhci_hcd
| S:  Product=UHCI Host Controller
| S:  SerialNumber=0000:00:1d.3
| C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
| I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
| E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
| T:  Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12   MxCh= 2
| B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
| D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
| P:  Vendor=1d6b ProdID=0001 Rev= 3.02
| S:  Manufacturer=Linux 3.2.1 uhci_hcd
| S:  Product=UHCI Host Controller
| S:  SerialNumber=0000:00:1d.2
| C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
| I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
| E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
| T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12   MxCh= 2
| B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
| D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
| P:  Vendor=1d6b ProdID=0001 Rev= 3.02
| S:  Manufacturer=Linux 3.2.1 uhci_hcd
| S:  Product=UHCI Host Controller
| S:  SerialNumber=0000:00:1d.1
| C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
| I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
| E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
| T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12   MxCh= 2
| B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
| D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
| P:  Vendor=1d6b ProdID=0001 Rev= 3.02
| S:  Manufacturer=Linux 3.2.1 uhci_hcd
| S:  Product=UHCI Host Controller
| S:  SerialNumber=0000:00:1d.0
| C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
| I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
| E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
| T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 8
| B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
| D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
| P:  Vendor=1d6b ProdID=0002 Rev= 3.02
| S:  Manufacturer=Linux 3.2.1 ehci_hcd
| S:  Product=EHCI Host Controller
| S:  SerialNumber=0000:00:1d.7
| C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
| I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
| E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms
\----------------------------------------------------
[initrd] Loading ethernet drivers.
[initrd] +--- Executing "/sbin/modprobe r8169"
[KERNEL] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[KERNEL] r8169 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[KERNEL] r8169 0000:01:00.0: setting latency timer to 64
[KERNEL] r8169 0000:01:00.0: eth0: RTL8168e/8111e at 0xf87e0000, e0:69:95:88:4c:72, XID 0c200000 IRQ 16
[KERNEL] r8169 0000:01:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[initrd] +- Errorlevel: 0, output:
[initrd] +------------------------
[initrd] NIC module r8169.ko loaded.
[hotplug] Firmware /lib/firmware/rtl_nic/rtl8168e-2.fw: 3920 bytes copied.
[KERNEL] r8169 0000:01:00.0: eth0: link down
[KERNEL] r8169 0000:01:00.0: eth0: link down
[KERNEL] Refined TSC clocksource calibration: 1800.064 MHz.
[KERNEL] Switching to clocksource tsc
[KERNEL] usb usb2: suspend_rh (auto-stop)
[KERNEL] usb usb3: suspend_rh (auto-stop)
[KERNEL] usb usb4: suspend_rh (auto-stop)
[KERNEL] usb usb5: suspend_rh (auto-stop)
[KERNEL] r8169 0000:01:00.0: eth0: link up
[initrd] eth0: 10ec:8136. Apply WOL configuration.
[initrd] dhcp: 363 bytes from 10.51.1.100.
[initrd] 00000000:0000015700000000001100000a330164ffffffff004300440157000002010600
[initrd] 00000020:67458b6b00000000000000000a3301140a33016400000000e06995884c720000
[initrd] 00000040:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 00000060:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 00000080:0000000000000000352e312e315c7774776172652e7078650000000000000000
[initrd] 000000a0:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 000000c0:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 000000e0:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 00000100:0000000000000000638253633501020104ffffff003a04000546003b0400093a
[initrd] 00000120:803304000a8c0036040a33016403040a33018c06040a3301640f0e6d75706b67
[initrd] 00000140:61752e6c6f63616c00420c31302e35312e312e313030004311352e312e315c77
[initrd] 00000160:74776172652e70786500ff
[initrd] dhcp: 363 bytes from 10.51.1.100.
[initrd] 00000000:0000015700000000001100000a330164ffffffff004300440157000002010600
[initrd] 00000020:67458b6b00000000000000000a3301140a33016400000000e06995884c720000
[initrd] 00000040:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 00000060:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 00000080:0000000000000000352e312e315c7774776172652e7078650000000000000000
[initrd] 000000a0:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 000000c0:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 000000e0:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 00000100:0000000000000000638253633501053a04000546003b0400093a803304000a8c
[initrd] 00000120:0036040a3301640104ffffff0003040a33018c06040a3301640f0e6d75706b67
[initrd] 00000140:61752e6c6f63616c00420c31302e35312e312e313030004311352e312e315c77
[initrd] 00000160:74776172652e70786500ff
[initrd] dhcp: server address 10.51.1.100.
[initrd] dhcp: 10.51.1.20/255.255.255.0.
[initrd] dhcp: default gateway 10.51.1.140.
[initrd] dhcp: DNS 10.51.1.100.
[initrd] dhcp: domain mupkgau.local.
[initrd] dhcp: TFTP 10.51.1.100.
[initrd] dhcp: boot file (067) 5.1.1\wtware.pxe.
[initrd] TFTP binary "5.1.1\", configs prefix "", using "\" slash.
Send broadcast WTCU discover.
[initrd] WTware TFTP v.5.1.1.
[initrd] tftp: download file Everyone\list.wtc from 10.51.1.100.
/--- FILE "/tmp/list.wtc" -----------------------
| #
| # Ñïèñîê ïîäêëþ÷àåìûõ ôàéëîâ.
| #
| # Ýòîò îòäåëüíûé ìåõàíèçì íàñòðîéêè òåðìèíàëîâ ïðåäíàçíà÷åí òîëüêî
| # äëÿ ðó÷íîãî êîíôèãóðèðîâàíèÿ òåðìèíàëîâ. Ãðàôè÷åñêèé êîíôèãóðàòîð
| # íå ÷èòàåò list.wtc, íå ÷èòàåò è íå ïîçâîëÿåò ðåäàêòèðîâàòü ôàéëû
| # èç êàòàëîãà ListIncludes. Ïîýòîìó íåëüçÿ ïûòàòüñÿ íàñòðàèâàòü îäèí
| # è òîò æå òåðìèíàë è êîíôèãóðàòîðîì, è ÷åðåç list.wtc.
| #
| # Ôîðìàò ñòðîêè â ýòîì ôàéëå:
| #  
| #    01.02.03.04.05.06[([èìÿïîëüçîâàòåëÿ@][èìÿòåðìèíàëà])] [ôàéë [ôàéë ...]]] [# êîììåíòàðèé]
| #
| # Ïðèìåðû:
| #
| #     02.03.04.05.06.07 file1
| #
| # Îçíà÷àåò, ÷òî òåðìèíàë ñ ìàê-àäðåñîì 02.03.04.05.06.07 ïðî÷èòàåò
| # ïàðàìåòðû èç ôàéëà ListIncludes/file1.
| #
| #
| #     03.04.05.06.07.08(vasja@) file2
| #
| # Îçíà÷àåò, ÷òî òåðìèíàë ñ ìàê-àäðåñîì 03.04.05.06.07.08 ïðî÷èòàåò
| # ïàðàìåòðû èç ôàéëà ListIncludes/file2 è â îêîøêî "Âõîä â Windows"
| # ïîäñòàâèò èìÿ ïîëüçîâàòåëÿ "vasja".
| #
| #
| #     04.05.06.07.08.09(term5) file6 file7 # Êîìï çàìãëàâáóõà.
| #
| # Îçíà÷àåò, ÷òî òåðìèíàëó ñ ìàê-àäðåñîì 04.05.06.07.08.09 áóäåò
| # ïðèñâîåíî èìÿ term5, àíàëîãè÷íî óêàçàíèþ ïàðàìåòðà clienthostname,
| # è îí ïðî÷èòàåò ïàðàìåòðû èç ôàéëîâ ListIncludes/file6 è
| # ListIncludes/file7.
| #
| #
| # ×òîáû ìîæíî áûëî óêàçûâàòü èìÿ ïîëüçîâàòåëÿ ðóññêèìè áóêâàìè, íàäî
| # îòêðûòü ýòîò ôàéë â Notepad è ñîõðàíèòü ñ Encoding: Unicode.
| #
\----------------------------------------------------
[initrd] tftp: download file Terminals\E0.69.95.88.4C.72\config.wtc from 10.51.1.100.
[initrd] tftp error code 1: File not found..
[initrd] tftp: download file Terminals\E0.69.95.88.4C.72.wtc from 10.51.1.100.
[initrd] tftp error code 1: File not found..
[initrd] tftp: download file Terminals\default.wtc from 10.51.1.100.
[initrd] tftp error code 1: File not found..
[initrd] tftp: download file Everyone\all.wtc from 10.51.1.100.
/--- FILE "/tmp/all.wtc" -----------------------
| [BOM]
| server=10.51.1.238
| domain=MUPKGAU
| shared_usb=off
| turnoffmenu=poweroff
| autoshutdown=30
| infobox=rctrl
| language=ru,default
\----------------------------------------------------
[initrd] tftp: download file Everyone\wtware.lic from 10.51.1.100.
/--- FILE "/etc/config.compiled" -----------------------
| [BOM]
| server=10.51.1.238
| domain=MUPKGAU
| shared_usb=off
| turnoffmenu=poweroff
| autoshutdown=30
| infobox=rctrl
| language=ru,default
| connection 
\----------------------------------------------------
[initrd] Hostname: "wtwE06995884C72".
Connection from wtc.exe at 10.51.1.100.