WTware v.5.1.7 
WTware 5.1.7 supervisor.
WTC listener active.
WTC broadcast listener active.
HTTPd listener active.
[KERNEL] Linux version 3.3.0 (root@c2) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) 
) #1 PREEMPT Thu Mar 22 17:29:10 MSK 2012
[KERNEL] KERNEL supported cpus:
[KERNEL] Intel GenuineIntel
[KERNEL] AMD AuthenticAMD
[KERNEL] NSC Geode by NSC
[KERNEL] Cyrix CyrixInstead
[KERNEL] Centaur CentaurHauls
[KERNEL] Transmeta GenuineTMx86
[KERNEL] Transmeta TransmetaCPU
[KERNEL] UMC UMC UMC UMC
[KERNEL] BIOS-provided physical RAM map:
[KERNEL] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[KERNEL] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[KERNEL] BIOS-e820: 0000000000100000 - 0000000007ff0000 (usable)
[KERNEL] BIOS-e820: 0000000007ff0000 - 0000000007ff3000 (ACPI NVS)
[KERNEL] BIOS-e820: 0000000007ff3000 - 0000000008000000 (ACPI data)
[KERNEL] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[KERNEL] Notice: NX (Execute Disable) protection missing in CPU!
[KERNEL] DMI 2.2 present.
[KERNEL] DMI: VIA Technologies, Inc. VT82C694X/694X-686B, BIOS 6.00 PG 03/26/2002
[KERNEL] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[KERNEL] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[KERNEL] last_pfn = 0x7ff0 max_arch_pfn = 0x100000
[KERNEL] MTRR default type: uncachable
[KERNEL] MTRR fixed ranges enabled:
[KERNEL] 00000-9FFFF write-back
[KERNEL] A0000-BFFFF uncachable
[KERNEL] C0000-CEFFF write-protect
[KERNEL] CF000-FFFFF uncachable
[KERNEL] MTRR variable ranges enabled:
[KERNEL] 0 base 000000000 mask FF8000000 write-back
[KERNEL] 1 base 0D0000000 mask FFC000000 write-combining
[KERNEL] 2 disabled
[KERNEL] 3 disabled
[KERNEL] 4 disabled
[KERNEL] 5 disabled
[KERNEL] 6 disabled
[KERNEL] 7 disabled
[KERNEL] initial memory mapped : 0 - 00800000
[KERNEL] Base memory trampoline at [c009c000] 9c000 size 12288
[KERNEL] init_memory_mapping: 0000000000000000-0000000007ff0000
[KERNEL] 0000000000 - 0000400000 page 4k
[KERNEL] 0000400000 - 0007c00000 page 2M
[KERNEL] 0007c00000 - 0007ff0000 page 4k
[KERNEL] kernel direct mapping tables up to 7ff0000 @ 7fb000-800000
[KERNEL] early_memtest: # of tests: 1
[KERNEL] 0000010000 - 000009c000 pattern 0000000000000000
[KERNEL] 00004760ac - 00007fb000 pattern 0000000000000000
[KERNEL] 00007fc000 - 0007aca000 pattern 0000000000000000
[KERNEL] 0007fcf000 - 0007ff0000 pattern 0000000000000000
[KERNEL] RAMDISK: 07aca000 - 07fcf000
[KERNEL] ACPI: RSDP 000f7320 00014 (v00 VIA694)
[KERNEL] ACPI: RSDT 07ff3000 00028 (v01 VIA694 AWRDACPI 42302E31 AWRD 00000000)
[KERNEL] ACPI: FACP 07ff3040 00074 (v01 VIA694 AWRDACPI 42302E31 AWRD 00000000)
[KERNEL] ACPI: DSDT 07ff30c0 02419 (v01 VIA694 AWRDACPI 00001000 MSFT 0100000C)
[KERNEL] ACPI: FACS 07ff0000 00040
[KERNEL] 127MB LOWMEM available.
[KERNEL] mapped low ram: 0 - 07ff0000
[KERNEL] low ram: 0 - 07ff0000
[KERNEL] Zone PFN ranges:
[KERNEL] DMA 0x00000010 -> 0x00001000
[KERNEL] Normal 0x00001000 -> 0x00007ff0
[KERNEL] Movable zone start PFN for each node
[KERNEL] Early memory PFN ranges
[KERNEL] 0: 0x00000010 -> 0x000000a0
[KERNEL] 0: 0x00000100 -> 0x00007ff0
[KERNEL] On node 0 totalpages: 32640
[KERNEL] free_area_init_node: node 0, pgdat c03f1fe0, node_mem_map c79ca200
[KERNEL] DMA zone: 32 pages used for memmap
[KERNEL] DMA zone: 0 pages reserved
[KERNEL] DMA zone: 3952 pages, LIFO batch:0
[KERNEL] Normal zone: 224 pages used for memmap
[KERNEL] Normal zone: 28432 pages, LIFO batch:7
[KERNEL] Using APIC driver default
[KERNEL] ACPI: PM-Timer IO Port: 0x4008
[KERNEL] Local APIC disabled by BIOS -- you can enable it with "lapic"
[KERNEL] APIC: disable apic facility
[KERNEL] APIC: switched to apic NOOP
[KERNEL] nr_irqs_gsi: 16
[KERNEL] Allocating PCI resources starting at 8000000 (gap: 8000000:f7ff0000)
[KERNEL] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[KERNEL] pcpu-alloc: [0] 0 
[KERNEL] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 
32384
[KERNEL] Kernel command line: root=/dev/ram0 ramdisk_blocksize=4096 ramdisk_size=16384 
memtest=1 quiet initrd=packages/initrd BOOT_IMAGE=packages/kernel 
[KERNEL] PID hash table entries: 512 (order: -1, 2048 bytes)
[KERNEL] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[KERNEL] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[KERNEL] Initializing CPU#0
[KERNEL] Memory: 120688k/131008k available (2253k kernel code, 9872k reserved, 
772k data, 296k init, 0k highmem)
[KERNEL] virtual kernel memory layout:
[KERNEL] fixmap : 0xfffa2000 - 0xfffff000 ( 372 kB)
[KERNEL] vmalloc : 0xc87f0000 - 0xfffa0000 ( 887 MB)
[KERNEL] lowmem : 0xc0000000 - 0xc7ff0000 ( 127 MB)
[KERNEL] .init : 0xc03f5000 - 0xc043f000 ( 296 kB)
[KERNEL] .data : 0xc03337cd - 0xc03f4900 ( 772 kB)
[KERNEL] .text : 0xc0100000 - 0xc03337cd (2253 kB)
[KERNEL] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[KERNEL] NR_IRQS:2304 nr_irqs:256 16
[KERNEL] CPU 0 irqstacks, hard=c7406000 soft=c7408000
[KERNEL] Console: colour VGA+ 80x25
[KERNEL] console [tty0] enabled
[KERNEL] Fast TSC calibration using PIT
[KERNEL] Detected 1099.983 MHz processor.
[KERNEL] Calibrating delay loop (skipped), value calculated using timer 
frequency.. 2199.96 BogoMIPS (lpj=1099983)
[KERNEL] pid_max: default: 32768 minimum: 301
[KERNEL] Mount-cache hash table entries: 512
[KERNEL] CPU: Intel(R) Celeron(TM) CPU 1100MHz stepping 01
[KERNEL] ACPI: Core revision 20120111
[KERNEL] ACPI: setting ELCR to 0200 (from 1e00)
[KERNEL] Performance Events: 
[KERNEL] no APIC, boot with the "lapic" boot parameter to force-enable it.
[KERNEL] no hardware sampling interrupt available.
[KERNEL] p6 PMU driver.
[KERNEL] ... version: 0
[KERNEL] ... bit width: 32
[KERNEL] ... generic registers: 2
[KERNEL] ... value mask: 00000000ffffffff
[KERNEL] ... max period: 000000007fffffff
[KERNEL] ... fixed-purpose events: 0
[KERNEL] ... event mask: 0000000000000003
[KERNEL] devtmpfs: initialized
[KERNEL] PM: Registering ACPI NVS region at 7ff0000 (12288 bytes)
[KERNEL] NET: Registered protocol family 16
[KERNEL] ACPI: bus type pci registered
[KERNEL] PCI: PCI BIOS revision 2.10 entry at 0xfb2d0, last bus=1
[KERNEL] PCI: Using configuration type 1 for base access
[KERNEL] bio: create slab at 0
[KERNEL] ACPI: Added _OSI(Module Device)
[KERNEL] ACPI: Added _OSI(Processor Device)
[KERNEL] ACPI: Added _OSI(3.0 _SCP Extensions)
[KERNEL] ACPI: Added _OSI(Processor Aggregator Device)
[KERNEL] ACPI: EC: Look up EC in DSDT
[KERNEL] ACPI: Interpreter enabled
[KERNEL] ACPI: (supports S0 S1 S5)
[KERNEL] ACPI: Using PIC for interrupt routing
[KERNEL] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" 
and report a bug
[KERNEL] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[KERNEL] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[KERNEL] pci_root PNP0A03:00: host bridge window [io 0x0d00-0x3fff] (ignored)
[KERNEL] pci_root PNP0A03:00: host bridge window [io 0x4100-0x4fff] (ignored)
[KERNEL] pci_root PNP0A03:00: host bridge window [io 0x5010-0x5fff] (ignored)
[KERNEL] pci_root PNP0A03:00: host bridge window [io 0x6080-0xffff] (ignored)
[KERNEL] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[KERNEL] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[KERNEL] pci_root PNP0A03:00: host bridge window [mem 0x08000000-0xffefffff] (ignored)
[KERNEL] PCI: root bus 00: using default resources
[KERNEL] PCI host bridge to bus 0000:00
[KERNEL] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[KERNEL] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[KERNEL] pci 0000:00:00.0: [1106:0605] type 0 class 0x000600
[KERNEL] pci 0000:00:00.0: reg 10: [mem 0xd0000000-0xd3ffffff pref]
[KERNEL] pci 0000:00:01.0: [1106:8605] type 1 class 0x000604
[KERNEL] pci 0000:00:01.0: supports D1
[KERNEL] pci 0000:00:07.0: [1106:0686] type 0 class 0x000601
[KERNEL] pci 0000:00:07.1: [1106:0571] type 0 class 0x000101
[KERNEL] pci 0000:00:07.1: reg 20: [io 0xd000-0xd00f]
[KERNEL] pci 0000:00:07.2: [1106:3038] type 0 class 0x000c03
[KERNEL] pci 0000:00:07.2: reg 20: [io 0xd400-0xd41f]
[KERNEL] pci 0000:00:07.3: [1106:3038] type 0 class 0x000c03
[KERNEL] pci 0000:00:07.3: reg 20: [io 0xd800-0xd81f]
[KERNEL] pci 0000:00:07.4: [1106:3057] type 0 class 0x000600
[KERNEL] pci 0000:00:07.4: quirk: [io 0x6000-0x607f] claimed by vt82c686 HW-mon
[KERNEL] pci 0000:00:07.4: quirk: [io 0x5000-0x500f] claimed by vt82c686 SMB
[KERNEL] pci 0000:00:07.5: [1106:3058] type 0 class 0x000401
[KERNEL] pci 0000:00:07.5: reg 10: [io 0xdc00-0xdcff]
[KERNEL] pci 0000:00:07.5: reg 14: [io 0xe000-0xe003]
[KERNEL] pci 0000:00:07.5: reg 18: [io 0xe400-0xe403]
[KERNEL] pci 0000:00:14.0: [8086:1229] type 0 class 0x000200
[KERNEL] pci 0000:00:14.0: reg 10: [mem 0xdb100000-0xdb100fff]
[KERNEL] pci 0000:00:14.0: reg 14: [io 0xec00-0xec3f]
[KERNEL] pci 0000:00:14.0: reg 18: [mem 0xdb000000-0xdb0fffff]
[KERNEL] pci 0000:00:14.0: reg 30: [mem 0xdb000000-0xdb0fffff pref]
[KERNEL] pci 0000:00:14.0: supports D1 D2
[KERNEL] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
[KERNEL] pci 0000:01:00.0: [10de:0181] type 0 class 0x000300
[KERNEL] pci 0000:01:00.0: reg 10: [mem 0xd8000000-0xd8ffffff]
[KERNEL] pci 0000:01:00.0: reg 14: [mem 0xd4000000-0xd7ffffff pref]
[KERNEL] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[KERNEL] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[KERNEL] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xd9ffffff]
[KERNEL] pci 0000:00:01.0: bridge window [mem 0xd4000000-0xd7ffffff pref]
[KERNEL] pci_bus 0000:00: on NUMA node 0
[KERNEL] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[KERNEL] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[KERNEL] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[KERNEL] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, 
disabled.
[KERNEL] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
[KERNEL] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
[KERNEL] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[KERNEL] vgaarb: loaded
[KERNEL] vgaarb: bridge control possible 0000:01:00.0
[KERNEL] usbcore: registered new interface driver usbfs
[KERNEL] usbcore: registered new interface driver hub
[KERNEL] usbcore: registered new device driver usb
[KERNEL] wmi: Mapper loaded
[KERNEL] PCI: Using ACPI for IRQ routing
[KERNEL] PCI: pci_cache_line_size set to 32 bytes
[KERNEL] reserve RAM buffer: 0000000007ff0000 - 0000000007ffffff 
[KERNEL] Switching to clocksource pit
[KERNEL] pnp: PnP ACPI init
[KERNEL] ACPI: bus type pnp registered
[KERNEL] pnp 00:00: [mem 0x000d0000-0x000d3fff]
[KERNEL] pnp 00:00: [mem 0x000d5800-0x000d7fff]
[KERNEL] pnp 00:00: [mem 0x000f0000-0x000fbfff]
[KERNEL] pnp 00:00: [mem 0x000fc000-0x000fffff]
[KERNEL] pnp 00:00: [mem 0x07ff0000-0x07ffffff]
[KERNEL] pnp 00:00: [mem 0xffff0000-0xffffffff]
[KERNEL] pnp 00:00: [mem 0x00000000-0x0009ffff]
[KERNEL] pnp 00:00: [mem 0x00100000-0x07feffff]
[KERNEL] pnp 00:00: [mem 0xfee00000-0xfee00fff]
[KERNEL] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
[KERNEL] system 00:00: [mem 0x000d5800-0x000d7fff] has been reserved
[KERNEL] system 00:00: [mem 0x000f0000-0x000fbfff] could not be reserved
[KERNEL] system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved
[KERNEL] system 00:00: [mem 0x07ff0000-0x07ffffff] could not be reserved
[KERNEL] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
[KERNEL] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[KERNEL] system 00:00: [mem 0x00100000-0x07feffff] could not be reserved
[KERNEL] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[KERNEL] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[KERNEL] pnp 00:01: [bus 00-ff]
[KERNEL] pnp 00:01: [io 0x0cf8-0x0cff]
[KERNEL] pnp 00:01: [io 0x0000-0x0cf7 window]
[KERNEL] pnp 00:01: [io 0x0d00-0x3fff window]
[KERNEL] pnp 00:01: [io 0x4000-0x407f]
[KERNEL] pnp 00:01: [io 0x4080-0x40ff]
[KERNEL] pnp 00:01: [io 0x4100-0x4fff window]
[KERNEL] pnp 00:01: [io 0x5000-0x500f]
[KERNEL] pnp 00:01: [io 0x5010-0x5fff window]
[KERNEL] pnp 00:01: [io 0x6000-0x607f]
[KERNEL] pnp 00:01: [io 0x6080-0xffff window]
[KERNEL] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[KERNEL] pnp 00:01: [mem 0x000c0000-0x000dffff window]
[KERNEL] pnp 00:01: [mem 0x08000000-0xffefffff window]
[KERNEL] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
[KERNEL] pnp 00:02: [io 0x0010-0x001f]
[KERNEL] pnp 00:02: [io 0x0022-0x003f]
[KERNEL] pnp 00:02: [io 0x0044-0x005f]
[KERNEL] pnp 00:02: [io 0x0062-0x0063]
[KERNEL] pnp 00:02: [io 0x0065-0x006f]
[KERNEL] pnp 00:02: [io 0x0074-0x007f]
[KERNEL] pnp 00:02: [io 0x0091-0x0093]
[KERNEL] pnp 00:02: [io 0x00a2-0x00bf]
[KERNEL] pnp 00:02: [io 0x00e0-0x00ef]
[KERNEL] pnp 00:02: [io 0x04d0-0x04d1]
[KERNEL] system 00:02: [io 0x04d0-0x04d1] has been reserved
[KERNEL] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[KERNEL] pnp 00:03: [dma 4]
[KERNEL] pnp 00:03: [io 0x0000-0x000f]
[KERNEL] pnp 00:03: [io 0x0080-0x0090]
[KERNEL] pnp 00:03: [io 0x0094-0x009f]
[KERNEL] pnp 00:03: [io 0x00c0-0x00df]
[KERNEL] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[KERNEL] pnp 00:04: [io 0x0070-0x0073]
[KERNEL] pnp 00:04: [irq 8]
[KERNEL] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[KERNEL] pnp 00:05: [io 0x0061]
[KERNEL] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[KERNEL] pnp 00:06: [io 0x00f0-0x00ff]
[KERNEL] pnp 00:06: [irq 13]
[KERNEL] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[KERNEL] pnp 00:07: [io 0x03f0-0x03f5]
[KERNEL] pnp 00:07: [io 0x03f7]
[KERNEL] pnp 00:07: [irq 6]
[KERNEL] pnp 00:07: [dma 2]
[KERNEL] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
[KERNEL] pnp 00:08: [io 0x03f8-0x03ff]
[KERNEL] pnp 00:08: [irq 4]
[KERNEL] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[KERNEL] pnp 00:09: [io 0x02f8-0x02ff]
[KERNEL] pnp 00:09: [irq 3]
[KERNEL] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[KERNEL] pnp 00:0a: [io 0x0060]
[KERNEL] pnp 00:0a: [io 0x0064]
[KERNEL] pnp 00:0a: [irq 1]
[KERNEL] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 (active)
[KERNEL] pnp: PnP ACPI: found 11 devices
[KERNEL] ACPI: ACPI bus type pnp unregistered
[KERNEL] Switching to clocksource acpi_pm
[KERNEL] pci 0000:00:14.0: address space collision: [mem 0xdb000000-0xdb0fffff 
pref] conflicts with 0000:00:14.0 [mem 0xdb000000-0xdb0fffff]
[KERNEL] PCI: max bus depth: 1 pci_try_num: 2
[KERNEL] pci 0000:00:14.0: BAR 6: assigned [mem 0x08000000-0x080fffff pref]
[KERNEL] pci 0000:01:00.0: BAR 6: assigned [mem 0xd9000000-0xd901ffff pref]
[KERNEL] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[KERNEL] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xd9ffffff]
[KERNEL] pci 0000:00:01.0: bridge window [mem 0xd4000000-0xd7ffffff pref]
[KERNEL] pci 0000:00:01.0: setting latency timer to 64
[KERNEL] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[KERNEL] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[KERNEL] pci_bus 0000:01: resource 1 [mem 0xd8000000-0xd9ffffff]
[KERNEL] pci_bus 0000:01: resource 2 [mem 0xd4000000-0xd7ffffff pref]
[KERNEL] NET: Registered protocol family 2
[KERNEL] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[KERNEL] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[KERNEL] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[KERNEL] TCP: Hash tables configured (established 4096 bind 4096)
[KERNEL] TCP reno registered
[KERNEL] UDP hash table entries: 256 (order: 0, 4096 bytes)
[KERNEL] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[KERNEL] NET: Registered protocol family 1
[KERNEL] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[KERNEL] pci 0000:00:07.0: Disabling VIA external APIC routing
[KERNEL] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 12
[KERNEL] PCI: setting IRQ 12 as level-triggered
[KERNEL] pci 0000:00:07.2: uhci_check_and_reset_hc: legsup = 0x2010
[KERNEL] pci 0000:00:07.2: Performing full reset
[KERNEL] pci 0000:00:07.3: uhci_check_and_reset_hc: legsup = 0x2010
[KERNEL] pci 0000:00:07.3: Performing full reset
[KERNEL] pci 0000:01:00.0: Boot video device
[KERNEL] PCI: CLS 32 bytes, default 32
[KERNEL] Freeing initrd memory: 5140k freed
[KERNEL] ROMFS MTD (C) 2007 Red Hat, Inc.
[KERNEL] msgmni has been set to 245
[KERNEL] io scheduler noop registered
[KERNEL] io scheduler cfq registered (default)
[KERNEL] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[KERNEL] ACPI: Power Button [PWRB]
[KERNEL] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[KERNEL] ACPI: Sleep Button [SLPB]
[KERNEL] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[KERNEL] ACPI: Power Button [PWRF]
[KERNEL] Marking TSC unstable due to TSC halts in idle
[KERNEL] ACPI: acpi_idle registered with cpuidle
[KERNEL] brd: module loaded
[KERNEL] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[KERNEL] ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96
[KERNEL] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[KERNEL] ohci_hcd: block sizes: ed 64 td 64
[KERNEL] uhci_hcd: USB Universal Host Controller Interface driver
[KERNEL] uhci_hcd 0000:00:07.2: UHCI Host Controller
[KERNEL] drivers/usb/core/inode.c: creating file 'devices'
[KERNEL] drivers/usb/core/inode.c: creating file '001'
[KERNEL] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[KERNEL] uhci_hcd 0000:00:07.2: detected 2 ports
[KERNEL] uhci_hcd 0000:00:07.2: uhci_check_and_reset_hc: cmd = 0x0000
[KERNEL] uhci_hcd 0000:00:07.2: Performing full reset
[KERNEL] uhci_hcd 0000:00:07.2: supports USB remote wakeup
[KERNEL] uhci_hcd 0000:00:07.2: irq 12, io base 0x0000d400
[KERNEL] usb usb1: default language 0x0409
[KERNEL] usb usb1: udev 1, busnum 1, minor = 0
[KERNEL] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[KERNEL] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[KERNEL] usb usb1: Product: UHCI Host Controller
[KERNEL] usb usb1: Manufacturer: Linux 3.3.0 uhci_hcd
[KERNEL] usb usb1: SerialNumber: 0000:00:07.2
[KERNEL] usb usb1: usb_probe_device
[KERNEL] usb usb1: configuration #1 chosen from 1 choice
[KERNEL] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[KERNEL] hub 1-0:1.0: usb_probe_interface
[KERNEL] hub 1-0:1.0: usb_probe_interface - got id
[KERNEL] hub 1-0:1.0: USB hub found
[KERNEL] hub 1-0:1.0: 2 ports detected
[KERNEL] hub 1-0:1.0: standalone hub
[KERNEL] hub 1-0:1.0: no power switching (usb 1.0)
[KERNEL] hub 1-0:1.0: individual port over-current protection
[KERNEL] hub 1-0:1.0: power on to power good time: 2ms
[KERNEL] hub 1-0:1.0: local power source is good
[KERNEL] hub 1-0:1.0: trying to enable port power on non-switchable hub
[KERNEL] drivers/usb/core/inode.c: creating file '001'
[KERNEL] uhci_hcd 0000:00:07.3: UHCI Host Controller
[KERNEL] drivers/usb/core/inode.c: creating file '002'
[KERNEL] uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
[KERNEL] uhci_hcd 0000:00:07.3: detected 2 ports
[KERNEL] uhci_hcd 0000:00:07.3: uhci_check_and_reset_hc: cmd = 0x0000
[KERNEL] uhci_hcd 0000:00:07.3: Performing full reset
[KERNEL] uhci_hcd 0000:00:07.3: supports USB remote wakeup
[KERNEL] uhci_hcd 0000:00:07.3: irq 12, io base 0x0000d800
[KERNEL] usb usb2: default language 0x0409
[KERNEL] usb usb2: udev 1, busnum 2, minor = 128
[KERNEL] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[KERNEL] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[KERNEL] usb usb2: Product: UHCI Host Controller
[KERNEL] usb usb2: Manufacturer: Linux 3.3.0 uhci_hcd
[KERNEL] usb usb2: SerialNumber: 0000:00:07.3
[KERNEL] usb usb2: usb_probe_device
[KERNEL] usb usb2: configuration #1 chosen from 1 choice
[KERNEL] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[KERNEL] hub 2-0:1.0: usb_probe_interface
[KERNEL] hub 2-0:1.0: usb_probe_interface - got id
[KERNEL] hub 2-0:1.0: USB hub found
[KERNEL] hub 2-0:1.0: 2 ports detected
[KERNEL] hub 2-0:1.0: standalone hub
[KERNEL] hub 2-0:1.0: no power switching (usb 1.0)
[KERNEL] hub 2-0:1.0: individual port over-current protection
[KERNEL] hub 2-0:1.0: power on to power good time: 2ms
[KERNEL] hub 2-0:1.0: local power source is good
[KERNEL] hub 2-0:1.0: trying to enable port power on non-switchable hub
[KERNEL] drivers/usb/core/inode.c: creating file '001'
[KERNEL] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[KERNEL] i8042: PNP: PS/2 appears to have AUX port disabled, if this is 
incorrect please boot with i8042.nopnp
[KERNEL] serio: i8042 KBD port at 0x60,0x64 irq 1
[KERNEL] mousedev: PS/2 mouse device common for all mice
[KERNEL] input: PC Speaker as /devices/platform/pcspkr/input/input3
[KERNEL] cpuidle: using governor ladder
[KERNEL] usbcore: registered new interface driver usbhid
[KERNEL] usbhid: USB HID core driver
[KERNEL] TCP cubic registered
[KERNEL] NET: Registered protocol family 17
[KERNEL] Using IPI Shortcut mode
[KERNEL] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[KERNEL] RAMDISK: lzo image found at block 0
[KERNEL] uhci_hcd 0000:00:07.2: port 1 portsc 008a,00
[KERNEL] uhci_hcd 0000:00:07.2: port 2 portsc 01ab,00
[KERNEL] hub 1-0:1.0: port 2: status 0301 change 0003
[KERNEL] uhci_hcd 0000:00:07.3: port 1 portsc 008a,00
[KERNEL] uhci_hcd 0000:00:07.3: port 2 portsc 008a,00
[KERNEL] hub 1-0:1.0: state 7 ports 2 chg 0004 evt 0000
[KERNEL] hub 1-0:1.0: port 2, status 0301, change 0000, 1.5 Mb/s
[KERNEL] usb 1-2: new low-speed USB device number 2 using uhci_hcd
[KERNEL] usb 1-2: skipped 1 descriptor after interface
[KERNEL] usb 1-2: default language 0x0409
[KERNEL] usb 1-2: udev 2, busnum 1, minor = 1
[KERNEL] usb 1-2: New USB device found, idVendor=2525, idProduct=8913
[KERNEL] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[KERNEL] usb 1-2: Product: Fellowes 5 Button
[KERNEL] usb 1-2: Manufacturer: Fellowes Inc.
[KERNEL] usb 1-2: usb_probe_device
[KERNEL] usb 1-2: configuration #1 chosen from 1 choice
[KERNEL] usb 1-2: adding 1-2:1.0 (config #1, interface 0)
[KERNEL] usbhid 1-2:1.0: usb_probe_interface
[KERNEL] usbhid 1-2:1.0: usb_probe_interface - got id
[KERNEL] VFS: Mounted root (romfs filesystem) readonly on device 1:0.
[KERNEL] devtmpfs: mounted
[KERNEL] Freeing unused kernel memory: 296k freed
[KERNEL] Write protecting the kernel text: 2256k
[KERNEL] Write protecting the kernel read-only data: 644k
[KERNEL] input: Fellowes Inc. Fellowes 5 Button as /devices/pci0000:00/0000:00:07.2/usb1/1-2/1-2:1.0/input/input5
[KERNEL] generic-usb 0003:2525:8913.0001: input: USB HID v1.00 Mouse [Fellowes 
Inc. Fellowes 5 Button] on usb-0000:00:07.2-2/input0
[KERNEL] drivers/usb/core/inode.c: creating file '002'
[KERNEL] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0004
[KERNEL] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
[pfac] Ok, PID 378.
[initrd] WTware shell v.5.1.7
[KERNEL] usb usb2: suspend_rh (auto-stop)
[initrd] PCI: 1106:0605 VIA Technologies, Inc. VT8605 [ProSavage PM133].
[initrd] PCI: C 04 1106:8605 Multimedia controller VIA Technologies, Inc. VT8605 
[PM133 AGP].
[initrd] PCI: C 01 1106:0686 Mass storage controller VIA Technologies, Inc. VT82C686 
[Apollo Super South].
[initrd] PCI: C 01:8a 1106:0571 Mass storage controller VIA Technologies, Inc. 
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE.
[initrd] PCI: C 03 1106:3038 Display controller VIA Technologies, Inc. VT82xxxxx 
UHCI USB 1.1 Controller.
[initrd] PCI: 1106:3057 VIA Technologies, Inc. VT82C686 [Apollo Super ACPI].
[initrd] PCI: C 01 1106:3058 Mass storage controller VIA Technologies, Inc. VT82C686 
AC97 Audio Controller.
[initrd] PCI: 8086:1229 Intel Corporation 82557/8/9/0/1 Ethernet Pro 100.
[initrd] PCI: 10de:0181 nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x].
/--- FILE "/proc/bus/usb/devices" -----------------------
| T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
| B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
| D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
| P: Vendor=1d6b ProdID=0001 Rev= 3.03
| S: Manufacturer=Linux 3.3.0 uhci_hcd
| S: Product=UHCI Host Controller
| S: SerialNumber=0000:00:07.3
| C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
| I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
| E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
| T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
| B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
| D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
| P: Vendor=1d6b ProdID=0001 Rev= 3.03
| S: Manufacturer=Linux 3.3.0 uhci_hcd
| S: Product=UHCI Host Controller
| S: SerialNumber=0000:00:07.2
| C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
| I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
| E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
| T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
| D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
| P: Vendor=2525 ProdID=8913 Rev=50.22
| S: Manufacturer=Fellowes Inc.
| S: Product=Fellowes 5 Button
| C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
| I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid
| E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
\----------------------------------------------------
[initrd] Loading ethernet drivers.
[initrd] modprobe e100.
[KERNEL] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[KERNEL] e100: Copyright(c) 1999-2006 Intel Corporation
[KERNEL] e100 0000:00:14.0: eth0: addr 0xdb100000, irq 12, MAC addr 00:02:b3:a7:8f:f9
[initrd] NIC module e100.ko loaded.
[hotplug] Firmware /lib/firmware/e100/d101m_ucode.bin: 539 bytes copied.
[KERNEL] e100 0000:00:14.0: eth0: NIC Link is Up 100 Mbps Full Duplex
[initrd] eth0: 8086:1229. Apply WOL configuration.
[initrd] dhcp: 348 bytes from 192.168.0.70.
[initrd] 00000000:000001480000000000110000c0a80046ffffffff004300440148000002010600
[initrd] 00000020:67458b6b0000000000000000c0a8006ec0a80046000000000002b3a78ff90000
[initrd] 00000040:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 00000060:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 00000080:0000000000000000352e312e375c7774776172652e7078650000000000000000
[initrd] 000000a0:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 000000c0:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 000000e0:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 00000100:0000000000000000638253633501020104ffffff003a04000546003b0400093a
[initrd] 00000120:803304000a8c003604c0a800460304c0a800080604c0a80008420d3139322e31
[initrd] 00000140:36382e302e3730004311352e312e375c7774776172652e70786500ff
[initrd] dhcp: 348 bytes from 192.168.0.70.
[initrd] 00000000:000001480000000000110000c0a80046ffffffff004300440148000002010600
[initrd] 00000020:67458b6b0000000000000000c0a8006ec0a80046000000000002b3a78ff90000
[initrd] 00000040:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 00000060:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 00000080:0000000000000000352e312e375c7774776172652e7078650000000000000000
[initrd] 000000a0:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 000000c0:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 000000e0:0000000000000000000000000000000000000000000000000000000000000000
[initrd] 00000100:0000000000000000638253633501053a04000546003b0400093a803304000a8c
[initrd] 00000120:003604c0a800460104ffffff000304c0a800080604c0a80008420d3139322e31
[initrd] 00000140:36382e302e3730004311352e312e375c7774776172652e70786500ff
[initrd] dhcp: server address 192.168.0.70.
[initrd] dhcp: 192.168.0.110/255.255.255.0.
[initrd] dhcp: default gateway 192.168.0.8.
[initrd] dhcp: DNS 192.168.0.8.
[initrd] dhcp: TFTP 192.168.0.70.
[initrd] dhcp: boot file (067) 5.1.7\wtware.pxe.
[initrd] TFTP binary "5.1.7\", configs prefix "", using "\" slash.
Send broadcast WTCU discover.
[initrd] WTware TFTP v.5.1.7.
[initrd] tftp: download file Everyone\list.wtc from 192.168.0.70.
/--- FILE "/tmp/list.wtc" -----------------------
| #44.87.FC.53.A3.CD u109.wtc
| #
| # Ñïèñîê ïîäêëþ÷àåìûõ ôàéëîâ.
| #
| # Ýòîò îòäåëüíûé ìåõàíèçì íàñòðîéêè òåðìèíàëîâ ïðåäíàçíà÷åí òîëüêî
| # äëÿ ðó÷íîãî êîíôèãóðèðîâàíèÿ òåðìèíàëîâ. Ãðàôè÷åñêèé êîíôèãóðàòîð
| # íå ÷èòàåò list.wtc, íå ÷èòàåò è íå ïîçâîëÿåò ðåäàêòèðîâàòü ôàéëû
| # èç êàòàëîãà ListIncludes. Ïîýòîìó íåëüçÿ ïûòàòüñÿ íàñòðàèâàòü îäèí
| # è òîò æå òåðìèíàë è êîíôèãóðàòîðîì, è ÷åðåç list.wtc.
| #
| # Ôîðìàò ñòðîêè â ýòîì ôàéëå:
| # 
| # 01.02.03.04.05.06[([èìÿïîëüçîâàòåëÿ@][èìÿòåðìèíàëà])] [ôàéë [ôàéë ...]]] [# 
êîììåíòàðèé]
| #
| # Ïðèìåðû:
| #
| # 02.03.04.05.06.07 file1
| #
| # Îçíà÷àåò, ÷òî òåðìèíàë ñ ìàê-àäðåñîì 02.03.04.05.06.07 ïðî÷èòàåò
| # ïàðàìåòðû èç ôàéëà ListIncludes/file1.
| #
| #
| # 03.04.05.06.07.08(vasja@) file2
| #
| # Îçíà÷àåò, ÷òî òåðìèíàë ñ ìàê-àäðåñîì 03.04.05.06.07.08 ïðî÷èòàåò
| # ïàðàìåòðû èç ôàéëà ListIncludes/file2 è â îêîøêî "Âõîä â Windows"
| # ïîäñòàâèò èìÿ ïîëüçîâàòåëÿ "vasja".
| #
| #
| # 04.05.06.07.08.09(term5) file6 file7 # Êîìï çàìãëàâáóõà.
| #
| # Îçíà÷àåò, ÷òî òåðìèíàëó ñ ìàê-àäðåñîì 04.05.06.07.08.09 áóäåò
| # ïðèñâîåíî èìÿ term5, àíàëîãè÷íî óêàçàíèþ ïàðàìåòðà clienthostname,
| # è îí ïðî÷èòàåò ïàðàìåòðû èç ôàéëîâ ListIncludes/file6 è
| # ListIncludes/file7.
| #
| #
| # ×òîáû ìîæíî áûëî óêàçûâàòü èìÿ ïîëüçîâàòåëÿ ðóññêèìè áóêâàìè, íàäî
| # îòêðûòü ýòîò ôàéë â Notepad è ñîõðàíèòü ñ Encoding: Unicode.
| #
\----------------------------------------------------
[initrd] tftp: download file Terminals\00.02.B3.A7.8F.F9\config.wtc from 192.168.0.70.
/--- FILE "/tmp/config.wtc" -----------------------
| [BOM]
| user=u110:RDP_z14v
| resolution=1280x1024
| refresh=auto
| mouse_accel_mult=2
| disk=floppy;cdrom;usb
| sound=on
| bpp=16
| video=nouveau(F)
| connection 
\----------------------------------------------------
[initrd] tftp: download file Everyone\all.wtc from 192.168.0.70.
/--- FILE "/tmp/all.wtc" -----------------------
| [BOM]
| server=192.168.0.70
| disk=floppy;cdrom
| shared_usb=off
| turnoffmenu=always
| managed=192.168.0.101
| language=ru,default
| keyboard=ru
\----------------------------------------------------
[initrd] tftp: download file Everyone\wtware.lic from 192.168.0.70.
/--- FILE "/etc/config.compiled" -----------------------
| [BOM]
| server=192.168.0.70
| disk=floppy;cdrom;usb
| shared_usb=off
| turnoffmenu=always
| managed=192.168.0.101
| language=ru,default
| keyboard=ru
| user=u110:RDP_z14v
| resolution=1280x1024
| refresh=auto
| mouse_accel_mult=2
| sound=on
| bpp=16
| video=nouveau(F)
| connection 
| license_00:02:b3:a7:8f:f9_full = \
| 97c257191ad52674dad7a6499ac0f7c4263a42815ce4b10043170321281c50f2 \
| 329023318c1e412d32a7874a6c99d6dbfb4cd232953ca04e4e203f0e4178c562 \
| 0fd39ff97e6a0ebfc528397fbb48b98519d471c3ee6397795e550907c1c512f0 \
| f8f9c6c47c1db35e61f6a50fef741b2d4021bb252ea459711be072fd02621dfc
\----------------------------------------------------
[initrd] Hostname: "wtw0002B3A78FF9".
RSHd listener active.
Everyone can control terminal by http.
[initrd] tftp: download and unpack file 5.1.7\packages\lib6 from 192.168.0.70.
[initrd] tftp: download and unpack file 5.1.7\packages\f from 192.168.0.70.
[initrd] tftp: download and unpack file 5.1.7\packages\graphic from 192.168.0.70.
[gm] WTware session manager v.5.1.7.
[gm] New mode: 1280x1024, 16 bit, 0 Hz, modeline "", DDC enabled, connector 0.
[KERNEL] uhci_hcd 0000:00:07.2: reserve dev 2 ep81-INT, period 8, phase 4, 118 
us
[gm] Mouse PnP: IMPS2 or EXPPS2?
[gm] Mouse PnP: EXPPS2.
[gm] Ignore event5: Fellowes Inc. Fellowes 5 Button.
[gm] Add keyboard event4: AT Translated Set 2 keyboard.
[gm] Ignore event3: PC Speaker.
[gm] Add keyboard event2: Power Button.
[gm] Add keyboard event1: Sleep Button.
[gm] Add keyboard event0: Power Button.
[gm] modprobe drm.
[KERNEL] Linux agpgart interface v0.103
[gm] Run modprobe nouveau .
[KERNEL] [drm] Initialized drm 1.1.0 20060810
[gm] modprobe nouveau.
[KERNEL] VGA switcheroo: detected Optimus DSM method \ handle
[KERNEL] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[KERNEL] PCI: setting IRQ 11 as level-triggered
[KERNEL] [drm] nouveau 0000:01:00.0: Detected an NV10 generation card (0x018100c1)
[KERNEL] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[KERNEL] [drm] nouveau 0000:01:00.0: ... appears to be valid
[KERNEL] [drm] nouveau 0000:01:00.0: BMP BIOS found
[KERNEL] [drm] nouveau 0000:01:00.0: BMP version 5.40
[KERNEL] [drm] nouveau 0000:01:00.0: Bios version 04.18.20.38
[KERNEL] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
[KERNEL] [drm] nouveau 0000:01:00.0: DCB version 2.2
[KERNEL] [drm] nouveau 0000:01:00.0: DCB outp 00: 01000300 000088b8
[KERNEL] [drm] nouveau 0000:01:00.0: DCB outp 01: 02010321 00000033
[KERNEL] [drm] nouveau 0000:01:00.0: Loading NV17 power sequencing microcode
[KERNEL] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xED04
[KERNEL] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xF1FC
[KERNEL] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xEE86
[KERNEL] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xF56F
[KERNEL] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xF58C
[KERNEL] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 5 at offset 0xF071
[KERNEL] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 6 at offset 0xF197
[KERNEL] [drm] nouveau 0000:01:00.0: 0 available performance level(s)
[KERNEL] [drm] nouveau 0000:01:00.0: c: core 274MHz memory 199MHz
[KERNEL] [TTM] Zone kernel: Available graphics memory: 63062 kiB.
[KERNEL] [TTM] Initializing pool allocator.
[KERNEL] [drm] nouveau 0000:01:00.0: Detected 64MiB VRAM
[KERNEL] [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture)
[KERNEL] [drm] nouveau 0000:01:00.0: Saving VGA fonts
[KERNEL] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[KERNEL] [drm] No driver support for vblank timestamp query.
[KERNEL] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 
0)
[KERNEL] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV encoder (output 1)
[KERNEL] [drm] nouveau 0000:01:00.0: Load detected on output B
[KERNEL] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x49000, bo c5fdc800
[KERNEL] fb0: nouveaufb frame buffer device
[KERNEL] drm: registered panic notifier
[KERNEL] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0
[gm] Kernel drm/kms module loaded.
[gm] Force 60Hz refresh.
[gm] count_fbs 0.
[gm] count_crtcs 2.
[gm] count_connectors 2.
[gm] count_encoders 2.
[gm] min_width 0, max_width 4096, min_height 0, max_height 4096.
[gm] ======================
[gm] connector_id 11.
[gm] encoder_id 0.
[gm] connector_type VGA (1).
[gm] connector_type_id 1.
[gm] connection 1.
[gm] mmWidth 380, mmHeight 310.
[gm] subpixel 0.
[gm] count_modes 17.
[gm] count_props 2.
[gm] count_encoders 1.
[gm] encoders_ptr [12] 
[gm] ======================
[gm] ======================
[KERNEL] [drm] nouveau 0000:01:00.0: Load detected on output B
[gm] connector_id 13.
[gm] encoder_id 0.
[gm] connector_type TV (13).
[gm] connector_type_id 1.
[gm] connection 1.
[gm] mmWidth 0, mmHeight 0.
[gm] subpixel 0.
[gm] count_modes 8.
[gm] count_props 9.
[gm] count_encoders 1.
[gm] encoders_ptr [14] 
[gm] ======================
[gm] ======================
[gm] crtc_id 9.
[gm] fb buffer_id 0 (disconnected from fb).
[gm] x 0, y 0.
[gm] mode_valid 0.
[gm] Mode : clock 0 H 0 0 0 0 0 V 0 0 0 0 0 VR 0 flags 0x0000 type 0x0000.
[gm] gamma_size 256.
[gm] 0 connectors.
[gm] ======================
[gm] ======================
[gm] crtc_id 10.
[gm] fb buffer_id 0 (disconnected from fb).
[gm] x 0, y 0.
[gm] mode_valid 0.
[gm] Mode : clock 0 H 0 0 0 0 0 V 0 0 0 0 0 VR 0 flags 0x0000 type 0x0000.
[gm] gamma_size 256.
[gm] 0 connectors.
[gm] ======================
[gm] ======================
[gm] encoder_id 12.
[gm] encoder_type DAC (1).
[gm] crtc_id 0.
[gm] possible_crtcs 3.
[gm] possible_clones 0.
[gm] ======================
[gm] ======================
[gm] encoder_id 14.
[gm] encoder_type TVDAC (4).
[gm] crtc_id 0.
[gm] possible_crtcs 3.
[gm] possible_clones 0.
[gm] ======================
[gm] Connector Id 11.
[gm] Mode 1280x1024: clock 108000 H 1280 1328 1440 1688 0 V 1024 1025 1028 1066 
0 VR 60 flags 0x0005 type 0x0048.
[gm] ^^^ Use this mode ^^^.
[gm] Mode 1280x1024: clock 135000 H 1280 1296 1440 1688 0 V 1024 1025 1028 1066 
0 VR 75 flags 0x0005 type 0x0040.
[gm] Mode 1280x960: clock 108000 H 1280 1376 1488 1800 0 V 960 961 964 1000 0 VR 
60 flags 0x0005 type 0x0040.
[gm] Mode 1152x864: clock 108000 H 1152 1216 1344 1600 0 V 864 865 868 900 0 VR 
75 flags 0x0005 type 0x0040.
[gm] Mode 1024x768: clock 78800 H 1024 1040 1136 1312 0 V 768 769 772 800 0 VR 
75 flags 0x0005 type 0x0040.
[gm] Mode 1024x768: clock 75000 H 1024 1048 1184 1328 0 V 768 771 777 806 0 VR 
70 flags 0x000a type 0x0040.
[gm] Mode 1024x768: clock 65000 H 1024 1048 1184 1344 0 V 768 771 777 806 0 VR 
60 flags 0x000a type 0x0040.
[gm] Mode 832x624: clock 57284 H 832 864 928 1152 0 V 624 625 628 667 0 VR 75 
flags 0x000a type 0x0040.
[gm] Mode 800x600: clock 50000 H 800 856 976 1040 0 V 600 637 643 666 0 VR 72 
flags 0x0005 type 0x0040.
[gm] Mode 800x600: clock 49500 H 800 816 896 1056 0 V 600 601 604 625 0 VR 75 
flags 0x0005 type 0x0040.
[gm] Mode 800x600: clock 40000 H 800 840 968 1056 0 V 600 601 605 628 0 VR 60 
flags 0x0005 type 0x0040.
[gm] Mode 800x600: clock 36000 H 800 824 896 1024 0 V 600 601 603 625 0 VR 56 
flags 0x0005 type 0x0040.
[gm] Mode 640x480: clock 31500 H 640 664 704 832 0 V 480 489 491 520 0 VR 73 
flags 0x000a type 0x0040.
[gm] Mode 640x480: clock 31500 H 640 656 720 840 0 V 480 481 484 500 0 VR 75 
flags 0x000a type 0x0040.
[gm] Mode 640x480: clock 30240 H 640 704 768 864 0 V 480 483 486 525 0 VR 67 
flags 0x000a type 0x0040.
[gm] Mode 640x480: clock 25200 H 640 656 752 800 0 V 480 490 492 525 0 VR 60 
flags 0x000a type 0x0040.
[gm] Mode 720x400: clock 28320 H 720 738 846 900 0 V 400 412 414 449 0 VR 70 
flags 0x0006 type 0x0040.
[gm] Once more, mode to choose:
[gm] Mode 1280x1024: clock 108000 H 1280 1328 1440 1688 0 V 1024 1025 1028 1066 
0 VR 60 flags 0x0005 type 0x0048.
[gm] Encoder Id 12.
[gm] CRTC Id 9.
[gm] fb_ptr 0xb7333000
[gm] stride 2560.
[gm] size 2621440.
[gm] handle 0x00000001.
[gm] ======================
[gm] fb_id 0.
[gm] width 1280.
[gm] height 1024.
[gm] pitch 2560.
[gm] bpp 16.
[gm] depth 16.
[gm] handle 1.
[gm] ======================
[gm] LINELENBYTES 2560, VBUF 0xb7333000.
[KERNEL] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 
0)
[KERNEL] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using 
output A
[gm] WMEMCOPY: 25600K copied in 376459 usec.
[gm] libc: 25600K copied in 375272 usec.
[gm] movs: 25600K copied in 375278 usec.
[gm] MMX: 25600K copied in 375487 usec.
[gm] Choose libc memcpy.
[gm] WTware TFTP v.5.1.7.
[gm] tftp: download and unpack file 5.1.7\packages\alsa from 192.168.0.70.
[gm] tftp: download and unpack file 5.1.7\packages\alsalib from 192.168.0.70.
[gm] tftp: download and unpack file 5.1.7\packages\alsalib6 from 192.168.0.70.
[gm] modprobe snd-via82xx.
[KERNEL] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[KERNEL] PCI: setting IRQ 10 as level-triggered
[KERNEL] snd_via82xx 0000:00:07.5: setting latency timer to 64
[gm] ALSA module snd-via82xx.ko loaded.
/--- FILE "/proc/asound/devices" -----------------------
| 2: [ 0- 0]: digital audio playback
| 3: [ 0- 0]: digital audio capture
| 4: [ 0] : control
| 33: : timer
\----------------------------------------------------
[pfac] Got command line /sbin/rdpsnd 1 0 100.
[gm] Run sound daemon.
[pfac] Ok, PID 450.
[gm] Loading ISO 9660 and UDF CDROM filesystem drivers.
[gm] modprobe udf.
[rdpsnd] RDP Sound Redirector, WTware v.5.1.7.
[gm] modprobe isofs.
[gm] Loading UTF8 charset.
[gm] modprobe nls_cp437.
[gm] modprobe nls_utf8.
[gm] Loading VFAT filesystem driver.
[gm] modprobe fat.
[gm] modprobe vfat.
[gm] modprobe ntfs.
[KERNEL] NTFS driver 2.1.30 [Flags: R/O MODULE].
[gm] Loading IDE bus driver.
[gm] modprobe libata dma=2.
[KERNEL] SCSI subsystem initialized
[KERNEL] libata version 3.00 loaded.
[gm] modprobe pata_via.
[KERNEL] pata_via 0000:00:07.1: version 0.3.4
[KERNEL] scsi0 : pata_via
[KERNEL] scsi1 : pata_via
[KERNEL] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
[KERNEL] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
[KERNEL] ata1.00: ATAPI: TOSHIBA CDW/DVD SDR1712C, TU01, max UDMA/33
[KERNEL] ata1.00: configured for UDMA/33
[KERNEL] scsi 0:0:0:0: CD-ROM TOSHIBA CDW/DVD SDR1712C TU01 PQ: 0 ANSI: 5
[gm] ATA module pata_via.ko loaded.
[gm] Loading cdrom driver.
[gm] modprobe usb-storage.
[KERNEL] Initializing USB Mass Storage driver...
[gm] modprobe sr_mod.
[KERNEL] usbcore: registered new interface driver usb-storage
[KERNEL] USB Mass Storage support registered.
[KERNEL] sr0: scsi3-mmc drive: 8x/52x writer cd/rw xa/form2 cdda tray
[KERNEL] cdrom: Uniform CD-ROM driver Revision: 3.20
[KERNEL] sr 0:0:0:0: Attached scsi CD-ROM sr0
[gm] Loading usb storage driver.
[gm] modprobe scsi_mod.
[hotplug] Block device 11:0. No action.
[hotplug] Block device 11:0. No action.
[gm] modprobe usb-storage.
[gm] modprobe sd_mod.
[gm] Loading floppy driver.
[gm] modprobe floppy.
[KERNEL] Floppy drive(s): fd0 is 1.44M
[KERNEL] FDC 0 is a post-1991 82077
[hotplug] Block device 2:0. No action.
[pfac] Got command line /sbin/resolver 084f7868 dns [192.168.0.70].
[pfac] Ok, PID 533.
[pfac] Process pid 533 terminated, status 00000000.
[gm] 192.168.0.70 => 192.168.0.70.
[gm] Free ram before fork terminal client /sbin/rdpclient (session 1): 108196 Kb.
[pfac] Got command line /sbin/rdpclient 1.
[pfac] Ok, PID 534.
[rdpclient 534] RDP Terminal Client, WTware v.5.1.7, pipe 1, pid 534.
[rdpclient 534] Add RDPDR channel.
[rdpclient 534] Add RDPSND channel.
[rdpclient 534] Add WTVC WTware control channel.
[rdpclient 534] Make RDP session with 192.168.0.70:3389.
[rdpclient 534] Username: "u110".
[rdpclient 534] Password: present.
[rdpclient 534] No domain.
[rdpclient 534] No shell.
[rdpclient 534] No directory.
[rdpclient 534] Window: 1280x1024@16.
[rdpclient 534] PFlags 0x0000006F.
[rdpclient 534] Keyboard 00000419:00000000.
[rdpclient 534] My hostname "wtw0002B3A78FF9".
[rdpclient 534] TCP: connecting to 192.168.0.70:3389.
[rdpclient 534] TCP: connection with 192.168.0.70:3389 established.
[rdpclient 534] Turn keepalive on.
[rdpclient 534] Free ram after buffers allocation: 104352 KB.
[rdpclient 534] RDP5 encryption (X.509).
[rdpclient 534] RC4 key 128 bit.
[rdpclient 534] INFOTYPE_LOGON_PLAINNOTIFY
[rdpclient 534] Sound redirection: 22050 frames per second.
[rdpsnd] Card 'rev50'/'VIA 82C686A/B rev50 with ALC101 at 0xdc00, irq 10'.
[rdpsnd] Mixer name: 'Realtek ALC101'.
[rdpsnd] Components: 'AC97a:414c4730'.
[rdpsnd] Controls: 24.
[rdpsnd] ALSA control 'Master Playback Switch'.
[rdpsnd] ALSA control 'Master Playback Volume'.
[rdpsnd] ALSA control 'Beep Playback Switch'.
[rdpsnd] ALSA control 'Beep Playback Volume'.
[rdpsnd] ALSA control 'Phone Playback Switch'.
[rdpsnd] ALSA control 'Phone Playback Volume'.
[rdpsnd] ALSA control 'Mic Playback Switch'.
[rdpsnd] ALSA control 'Mic Playback Volume'.
[rdpsnd] ALSA control 'Mic Boost (+20dB)'.
[rdpsnd] ALSA control 'Line Playback Switch'.
[rdpsnd] ALSA control 'Line Playback Volume'.
[rdpsnd] ALSA control 'CD Playback Switch'.
[rdpsnd] ALSA control 'CD Playback Volume'.
[rdpsnd] ALSA control 'Aux Playback Switch'.
[rdpsnd] ALSA control 'Aux Playback Volume'.
[rdpsnd] ALSA control 'PCM Playback Switch'.
[rdpsnd] ALSA control 'PCM Playback Volume'.
[rdpsnd] ALSA control 'Capture Source'.
[rdpsnd] ALSA control 'Capture Switch'.
[rdpsnd] ALSA control 'Capture Volume'.
[rdpsnd] ALSA control '3D Control - Switch'.
[rdpsnd] ALSA control '3D Control - Center'.
[rdpsnd] ALSA control '3D Control - Depth'.
[rdpsnd] ALSA control 'External Amplifier'.
[rdpsnd] ALSA buffer size 15052 bytes.
WARNING: failed to send all data in single packet.

Home WTware diskless client. 