Запуск терминала

[KERNEL] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0100
[KERNEL] ehci_hcd 0000:00:0b.1: GetStatus port:8 status 001002 0  ACK POWER sig=se0 CSC
[KERNEL] hub 1-0:1.0: port 8, status 0100, change 0001, 12 Mb/s
[KERNEL] usb 1-8: USB disconnect, device number 2
[KERNEL] usb 1-8: unregistering device
[KERNEL] usb 1-8: unregistering interface 1-8:1.0
[KERNEL] drivers/usb/core/file.c: removing 0 minor
[KERNEL] usblp0: removed
[KERNEL] usb 1-8: usb_disable_device nuking all URBs
[KERNEL] hub 1-0:1.0: debounce: port 8: total 100ms stable 100ms status 0x100
[pfac] Got command line /sbin/resolver 08b7af28 dns [192.168.77.2].
[pfac] Ok, PID 642.
[pfac] Process pid 642 terminated, status 00000000.
[gm] 192.168.77.2 => 192.168.77.2.
[gm] Free ram before fork terminal client /sbin/rdpclient (session 2): 425852 Kb.
[pfac] Got command line /sbin/rdpclient 2.
[pfac] Ok, PID 643.
[rdpclient 643] RDP Terminal Client, WTware v.5.0.5, pipe 2, pid 643.
[rdpclient 643] Add RDPDR channel.
[rdpclient 643] Add serial redirection, COM1 in the session = hardware USBCOM1.
[rdpclient 643] Add CLIPRDR channel.
[rdpclient 643] Add WTVC WTware control channel.
[rdpclient 643] Make RDP session with 192.168.77.2:3389.
[rdpclient 643]  Username: "Administrator".
[rdpclient 643]  Password: present.
[rdpclient 643]  Domain: "ufms".
[rdpclient 643]  No shell.
[rdpclient 643]  No directory.
[rdpclient 643]  Window: 1280x1024@16.
[rdpclient 643]  PFlags 0x0000006F.
[rdpclient 643]  Keyboard 00000409:00000000.
[rdpclient 643]  My hostname "Admin".
[rdpclient 643] TCP: connecting to 192.168.77.2:3389.
[rdpclient 643] TCP: connection with 192.168.77.2:3389 established.
[rdpclient 643] Turn keepalive on.
[rdpclient 643] Free ram after buffers allocation: 422000 KB.
[rdpclient 643] RDP4 encryption (NT4, XP, 2000 and 2003 in remote administration mode).
[rdpclient 643] RC4 key 128 bit.
[rdpclient 643] Timezone "(UTC+03:00) Moscow, St. Petersburg, Volgograd".
[rdpclient 643] SessionId 0x00000002: UFMS\Administrator.

При включении принтера
[KERNEL] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0100
[KERNEL] ehci_hcd 0000:00:0b.1: GetStatus port:8 status 001803 0  ACK POWER sig=j CSC CONNECT
[KERNEL] hub 1-0:1.0: port 8, status 0501, change 0001, 480 Mb/s
[KERNEL] hub 1-0:1.0: debounce: port 8: total 100ms stable 100ms status 0x501
[KERNEL] ehci_hcd 0000:00:0b.1: port 8 high speed
[KERNEL] ehci_hcd 0000:00:0b.1: GetStatus port:8 status 001005 0  ACK POWER sig=se0 PE CONNECT
[KERNEL] usb 1-8: new high speed USB device number 3 using ehci_hcd
[KERNEL] ehci_hcd 0000:00:0b.1: port 8 high speed
[KERNEL] ehci_hcd 0000:00:0b.1: GetStatus port:8 status 001005 0  ACK POWER sig=se0 PE CONNECT
[KERNEL] usb 1-8: default language 0x0409
[KERNEL] usb 1-8: udev 3, busnum 1, minor = 2
[KERNEL] usb 1-8: New USB device found, idVendor=0b3c, idProduct=0001
[KERNEL] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[KERNEL] usb 1-8: Product: Olivetti PR2 E
[KERNEL] usb 1-8: Manufacturer: Olivetti
[KERNEL] usb 1-8: usb_probe_device
[KERNEL] usb 1-8: configuration #1 chosen from 1 choice
[KERNEL] usb 1-8: adding 1-8:1.0 (config #1, interface 0)
[KERNEL] usblp 1-8:1.0: usb_probe_interface
[KERNEL] usblp 1-8:1.0: usb_probe_interface - got id
[KERNEL] usb 1-8: manual set_interface for iface 0, alt 0
[KERNEL] usblp 1-8:1.0: looking for a minor, starting at 0
[KERNEL] usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x0B3C pid 0x0001
[KERNEL] drivers/usb/core/inode.c: creating file '003'