WTware v.5.0.1
 WTware 5.0.1 supervisor.
 WTC listener active.
 WTC broadcast listener active.
 HTTPd listener active.
 [KERNEL (unsync)] j=1599959)
 [KERNEL] pid_max: default: 32768 minimum: 301
 [KERNEL] Mount-cache hash table entries: 512
 [KERNEL] Disabled fast string operations
 [KERNEL] using mwait in idle threads.
 [KERNEL] CPU: Intel(R) Atom(TM) CPU 330 @ 1.60GHz stepping 02
 [KERNEL] ACPI: Core revision 20110413
 [KERNEL] Performance Events: PEBS fmt0+, Atom events, Intel PMU driver.
 [KERNEL] ... version: 3
 [KERNEL] ... bit width: 40
 [KERNEL] ... generic registers: 2
 [KERNEL] ... value mask: 000000ffffffffff
 [KERNEL] ... max period: 000000007fffffff
 [KERNEL] ... fixed-purpose events: 3
 [KERNEL] ... event mask: 0000000700000003
 [KERNEL] Enabling APIC mode: Flat. Using 1 I/O APICs
 [KERNEL] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
 [KERNEL] NET: Registered protocol family 16
 [KERNEL] ACPI: bus type pci registered
 [KERNEL] PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xfc000000-0xfdffffff] (base 0xfc000000)
 [KERNEL] PCI: not using MMCONFIG
 [KERNEL] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=7
 [KERNEL] PCI: Using configuration type 1 for base access
 [KERNEL] bio: create slab  at 0
 [KERNEL] ACPI: EC: Look up EC in DSDT
 [KERNEL] ACPI: Executed 1 blocks of module-level executable AML code
 [KERNEL] ACPI: Interpreter enabled
 [KERNEL] ACPI: (supports S0 S3 S5)
 [KERNEL] ACPI: Using IOAPIC for interrupt routing
 [KERNEL] PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xfc000000-0xfdffffff] (base 0xfc000000)
 [KERNEL] PCI: MMCONFIG at [mem 0xfc000000-0xfdffffff] reserved in ACPI motherboard resources
 [KERNEL] PCI: Using MMCONFIG for extended config space
 [KERNEL] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
 [KERNEL] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
 [KERNEL] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
 [KERNEL] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
 [KERNEL] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
 [KERNEL] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
 [KERNEL] pci_root PNP0A03:00: host bridge window [mem 0x40000000-0xfbffffff]
 [KERNEL] pci_root PNP0A03:00: host bridge window [mem 0xfe000000-0xfebfffff]
 [KERNEL] pci 0000:00:00.0: [10de:0a82] type 0 class 0x000600
 [KERNEL] pci 0000:00:00.1: [10de:0a88] type 0 class 0x000500
 [KERNEL] pci 0000:00:03.0: [10de:0aad] type 0 class 0x000601
 [KERNEL] pci 0000:00:03.0: reg 10: [io 0x4f00-0x4fff]
 [KERNEL] pci 0000:00:03.1: [10de:0aa4] type 0 class 0x000500
 [KERNEL] pci 0000:00:03.2: [10de:0aa2] type 0 class 0x000c05
 [KERNEL] pci 0000:00:03.2: reg 10: [io 0x4900-0x493f]
 [KERNEL] pci 0000:00:03.2: reg 20: [io 0x4d00-0x4d3f]
 [KERNEL] pci 0000:00:03.2: reg 24: [io 0x4e00-0x4e3f]
 [KERNEL] pci 0000:00:03.2: PME# supported from D3hot D3cold
 [KERNEL] pci 0000:00:03.2: PME# disabled
 [KERNEL] pci 0000:00:03.3: [10de:0a89] type 0 class 0x000500
 [KERNEL] pci 0000:00:03.5: [10de:0aa3] type 0 class 0x000b40
 [KERNEL] pci 0000:00:03.5: reg 10: [mem 0xfae80000-0xfaefffff]
 [KERNEL] pci 0000:00:04.0: [10de:0aa5] type 0 class 0x000c03
 [KERNEL] pci 0000:00:04.0: reg 10: [mem 0xfae7f000-0xfae7ffff]
 [KERNEL] pci 0000:00:04.0: supports D1 D2
 [KERNEL] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
 [KERNEL] pci 0000:00:04.0: PME# disabled
 [KERNEL] pci 0000:00:04.1: [10de:0aa6] type 0 class 0x000c03
 [KERNEL] pci 0000:00:04.1: reg 10: [mem 0xfae7ec00-0xfae7ecff]
 [KERNEL] pci 0000:00:04.1: supports D1 D2
 [KERNEL] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
 [KERNEL] pci 0000:00:04.1: PME# disabled
 [KERNEL] pci 0000:00:06.0: [10de:0aa7] type 0 class 0x000c03
 [KERNEL] pci 0000:00:06.0: reg 10: [mem 0xfae7d000-0xfae7dfff]
 [KERNEL] pci 0000:00:06.0: supports D1 D2
 [KERNEL] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
 [KERNEL] pci 0000:00:06.0: PME# disabled
 [KERNEL] pci 0000:00:06.1: [10de:0aa9] type 0 class 0x000c03
 [KERNEL] pci 0000:00:06.1: reg 10: [mem 0xfae7e800-0xfae7e8ff]
 [KERNEL] pci 0000:00:06.1: supports D1 D2
 [KERNEL] pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold
 [KERNEL] pci 0000:00:06.1: PME# disabled
 [KERNEL] pci 0000:00:08.0: [10de:0ac0] type 0 class 0x000403
 [KERNEL] pci 0000:00:08.0: reg 10: [mem 0xfae78000-0xfae7bfff]
 [KERNEL] pci 0000:00:08.0: PME# supported from D3hot D3cold
 [KERNEL] pci 0000:00:08.0: PME# disabled
 [KERNEL] pci 0000:00:09.0: [10de:0aab] type 1 class 0x000604
 [KERNEL] pci 0000:00:0c.0: [10de:0ac4] type 1 class 0x000604
 [KERNEL] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
 [KERNEL] pci 0000:00:0c.0: PME# disabled
 [KERNEL] pci 0000:00:10.0: [10de:0aa0] type 1 class 0x000604
 [KERNEL] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
 [KERNEL] pci 0000:00:10.0: PME# disabled
 [KERNEL] pci 0000:00:15.0: [10de:0ac6] type 1 class 0x000604
 [KERNEL] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
 [KERNEL] pci 0000:00:15.0: PME# disabled
 [KERNEL] pci 0000:00:16.0: [10de:0ac7] type 1 class 0x000604
 [KERNEL] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
 [KERNEL] pci 0000:00:16.0: PME# disabled
 [KERNEL] pci 0000:00:17.0: [10de:0ac7] type 1 class 0x000604
 [KERNEL] pci 0000:00:17.0: PME# supported from D0 D1 D2 D3hot D3cold
 [KERNEL] pci 0000:00:17.0: PME# disabled
 [KERNEL] pci 0000:00:18.0: [10de:0ac7] type 1 class 0x000604
 [KERNEL] pci 0000:00:18.0: PME# supported from D0 D1 D2 D3hot D3cold
 [KERNEL] pci 0000:00:18.0: PME# disabled
 [KERNEL] pci 0000:00:09.0: PCI bridge to [bus 01-01] (subtractive decode)
 [KERNEL] pci 0000:00:09.0: bridge window [io 0xf000-0x0000] (disabled)
 [KERNEL] pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
 [KERNEL] pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
 [KERNEL] pci 0000:00:09.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
 [KERNEL] pci 0000:00:09.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
 [KERNEL] pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
 [KERNEL] pci 0000:00:09.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
 [KERNEL] pci 0000:00:09.0: bridge window [mem 0x40000000-0xfbffffff] (subtractive decode)
 [KERNEL] pci 0000:00:09.0: bridge window [mem 0xfe000000-0xfebfffff] (subtractive decode)
 [KERNEL] pci 0000:00:0c.0: PCI bridge to [bus 02-02]
 [KERNEL] pci 0000:00:0c.0: bridge window [io 0xf000-0x0000] (disabled)
 [KERNEL] pci 0000:00:0c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
 [KERNEL] pci 0000:00:0c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
 [KERNEL] pci 0000:03:00.0: [10de:087d] type 0 class 0x000300
 [KERNEL] pci 0000:03:00.0: reg 10: [mem 0xfb000000-0xfbffffff]
 [KERNEL] pci 0000:03:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
 [KERNEL] pci 0000:03:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit pref]
 [KERNEL] pci 0000:03:00.0: reg 24: [io 0xdc00-0xdc7f]
 [KERNEL] pci 0000:03:00.0: reg 30: [mem 0xfafe0000-0xfaffffff pref]
 [KERNEL] pci 0000:00:10.0: PCI bridge to [bus 03-03]
 [KERNEL] pci 0000:00:10.0: bridge window [io 0xd000-0xdfff]
 [KERNEL] pci 0000:00:10.0: bridge window [mem 0xfaf00000-0xfbffffff]
 [KERNEL] pci 0000:00:10.0: bridge window [mem 0xe0000000-0xf9ffffff 64bit pref]
 [KERNEL] pci 0000:00:15.0: PCI bridge to [bus 04-04]
 [KERNEL] pci 0000:00:15.0: bridge window [io 0xf000-0x0000] (disabled)
 [KERNEL] pci 0000:00:15.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
 [KERNEL] pci 0000:00:15.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
 [KERNEL] pci 0000:05:00.0: [1969:1063] type 0 class 0x000200
 [KERNEL] pci 0000:05:00.0: reg 10: [mem 0xfeac0000-0xfeafffff 64bit]
 [KERNEL] pci 0000:05:00.0: reg 18: [io 0xec00-0xec7f]
 [KERNEL] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
 [KERNEL] pci 0000:05:00.0: PME# disabled
 [KERNEL] pci 0000:00:16.0: PCI bridge to [bus 05-05]
 [KERNEL] pci 0000:00:16.0: bridge window [io 0xe000-0xefff]
 [KERNEL] pci 0000:00:16.0: bridge window [mem 0xfea00000-0xfeafffff]
 [KERNEL] pci 0000:00:16.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
 [KERNEL] pci 0000:06:00.0: [168c:002b] type 0 class 0x000280
 [KERNEL] pci 0000:06:00.0: reg 10: [mem 0xfebf0000-0xfebfffff 64bit]
 [KERNEL] pci 0000:06:00.0: supports D1
 [KERNEL] pci 0000:06:00.0: PME# supported from D0 D1 D3hot
 [KERNEL] pci 0000:06:00.0: PME# disabled
 [KERNEL] pci 0000:00:17.0: PCI bridge to [bus 06-06]
 [KERNEL] pci 0000:00:17.0: bridge window [io 0xf000-0x0000] (disabled)
 [KERNEL] pci 0000:00:17.0: bridge window [mem 0xfeb00000-0xfebfffff]
 [KERNEL] pci 0000:00:17.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
 [KERNEL] pci 0000:00:18.0: PCI bridge to [bus 07-07]
 [KERNEL] pci 0000:00:18.0: bridge window [io 0xf000-0x0000] (disabled)
 [KERNEL] pci 0000:00:18.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
 [KERNEL] pci 0000:00:18.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
 [KERNEL] pci_bus 0000:00: on NUMA node 0
 [KERNEL] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
 [KERNEL] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT]
 [KERNEL] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
 [KERNEL] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
 [KERNEL] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
 [KERNEL] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
 [KERNEL] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
 [KERNEL] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x09)
 [KERNEL] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
 [KERNEL] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
 [KERNEL] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
 [KERNEL] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
 [KERNEL] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *0, disabled.
 [KERNEL] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled.
 [KERNEL] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled.
 [KERNEL] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled.
 [KERNEL] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled.
 [KERNEL] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled.
 [KERNEL] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled.
 [KERNEL] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled.
 [KERNEL] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *0, disabled.
 [KERNEL] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled.
 [KERNEL] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled.
 [KERNEL] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled.
 [KERNEL] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *0, disabled.
 [KERNEL] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled.
 [KERNEL] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled.
 [KERNEL] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled.
 [KERNEL] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *15
 [KERNEL] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled.
 [KERNEL] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled.
 [KERNEL] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled.
 [KERNEL] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *10
 [KERNEL] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled.
 [KERNEL] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled.
 [KERNEL] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled.
 [KERNEL] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled.
 [KERNEL] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled.
 [KERNEL] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled.
 [KERNEL] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled.
 [KERNEL] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *9
 [KERNEL] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *15
 [KERNEL] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
 [KERNEL] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *9
 [KERNEL] ACPI: PCI Interrupt Link [SGRU] (IRQs 11) *7
 [KERNEL] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
 [KERNEL] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *11
 [KERNEL] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
 [KERNEL] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
 [KERNEL] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *10
 [KERNEL] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *11
 [KERNEL] ACPI: PCI Interrupt Link [LRP0] (IRQs 20 21 22 23) *10
 [KERNEL] ACPI: PCI Interrupt Link [LRP1] (IRQs 20 21 22 23) *0, disabled.
 [KERNEL] ACPI: PCI Interrupt Link [LRP2] (IRQs 20 21 22 23) *0, disabled.
 [KERNEL] ACPI: PCI Interrupt Link [LRP3] (IRQs 20 21 22 23) *11
 [KERNEL] ACPI: PCI Interrupt Link [LRP4] (IRQs 20 21 22 23) *9
 [KERNEL] ACPI: PCI Interrupt Link [LRP5] (IRQs 20 21 22 23) *15
 [KERNEL] ACPI: PCI Interrupt Link [LRP6] (IRQs 20 21 22 23) *14
 [KERNEL] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
 [KERNEL] vgaarb: loaded
 [KERNEL] vgaarb: bridge control possible 0000:03:00.0
 [KERNEL] usbcore: registered new interface driver usbfs
 [KERNEL] usbcore: registered new interface driver hub
 [KERNEL] usbcore: registered new device driver usb
 [KERNEL] PCI: Using ACPI for IRQ routing
 [KERNEL] PCI: pci_cache_line_size set to 64 bytes
 [KERNEL] reserve RAM buffer: 000000000009fc00 - 000000000009ffff 
 [KERNEL] reserve RAM buffer: 0000000037fa0000 - 0000000037ffffff 
 [KERNEL] pnp: PnP ACPI init
 [KERNEL] ACPI: bus type pnp registered
 [KERNEL] pnp 00:00: [bus 00-ff]
 [KERNEL] pnp 00:00: [io 0x0cf8-0x0cff]
 [KERNEL] pnp 00:00: [io 0x0000-0x0cf7 window]
 [KERNEL] pnp 00:00: [io 0x0d00-0xffff window]
 [KERNEL] pnp 00:00: [mem 0x000a0000-0x000bffff window]
 [KERNEL] pnp 00:00: [mem 0x000d0000-0x000dffff window]
 [KERNEL] pnp 00:00: [mem 0x40000000-0xfbffffff window]
 [KERNEL] pnp 00:00: [mem 0xfe000000-0xfebfffff window]
 [KERNEL] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
 [KERNEL] pnp 00:01: [dma 4]
 [KERNEL] pnp 00:01: [io 0x0000-0x000f]
 [KERNEL] pnp 00:01: [io 0x0081-0x0083]
 [KERNEL] pnp 00:01: [io 0x0087]
 [KERNEL] pnp 00:01: [io 0x0089-0x008b]
 [KERNEL] pnp 00:01: [io 0x008f]
 [KERNEL] pnp 00:01: [io 0x00c0-0x00df]
 [KERNEL] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
 [KERNEL] pnp 00:02: [io 0x0060]
 [KERNEL] pnp 00:02: [io 0x0064]
 [KERNEL] pnp 00:02: [irq 1]
 [KERNEL] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
 [KERNEL] pnp 00:03: [irq 12]
 [KERNEL] pnp 00:03: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
 [KERNEL] pnp 00:04: [io 0x0061]
 [KERNEL] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
 [KERNEL] pnp 00:05: [io 0x00f0-0x00ff]
 [KERNEL] pnp 00:05: [irq 13]
 [KERNEL] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
 [KERNEL] pnp 00:06: [mem 0x000d0000-0x000d3fff window]
 [KERNEL] pnp 00:06: [mem 0x000d4000-0x000d7fff window]
 [KERNEL] pnp 00:06: [mem 0x000de000-0x000dffff window]
 [KERNEL] pnp 00:06: [io 0x0010-0x001f]
 [KERNEL] pnp 00:06: [io 0x0022-0x003f]
 [KERNEL] pnp 00:06: [io 0x0044-0x004d]
 [KERNEL] pnp 00:06: [io 0x0050-0x005f]
 [KERNEL] pnp 00:06: [io 0x0063]
 [KERNEL] pnp 00:06: [io 0x0065]
 [KERNEL] pnp 00:06: [io 0x0072-0x007f]
 [KERNEL] pnp 00:06: [io 0x0080]
 [KERNEL] pnp 00:06: [io 0x0084-0x0086]
 [KERNEL] pnp 00:06: [io 0x0088]
 [KERNEL] pnp 00:06: [io 0x008c-0x008e]
 [KERNEL] pnp 00:06: [io 0x0090-0x009f]
 [KERNEL] pnp 00:06: [io 0x00a2-0x00bf]
 [KERNEL] pnp 00:06: [io 0x00e0-0x00ef]
 [KERNEL] pnp 00:06: [io 0x04d0-0x04d1]
 [KERNEL] pnp 00:06: [io 0x0800-0x080f]
 [KERNEL] pnp 00:06: [io 0x4000-0x407f]
 [KERNEL] pnp 00:06: [io 0x4080-0x40ff]
 [KERNEL] pnp 00:06: [io 0x4400-0x447f]
 [KERNEL] pnp 00:06: [io 0x4480-0x44ff]
 [KERNEL] pnp 00:06: [io 0x4800-0x487f]
 [KERNEL] pnp 00:06: [io 0x4880-0x48ff]
 [KERNEL] pnp 00:06: [io 0x0062]
 [KERNEL] pnp 00:06: [io 0x0066]
 [KERNEL] pnp 00:06: [mem 0x00000000-0xffffffff disabled]
 [KERNEL] pnp 00:06: [mem 0xfefe2000-0xfefe3fff]
 [KERNEL] pnp 00:06: [mem 0xfefe1000-0xfefe1fff]
 [KERNEL] pnp 00:06: [mem 0xfee01000-0xfeefffff]
 [KERNEL] system 00:06: [io 0x04d0-0x04d1] has been reserved
 [KERNEL] system 00:06: [io 0x0800-0x080f] has been reserved
 [KERNEL] system 00:06: [io 0x4000-0x407f] has been reserved
 [KERNEL] system 00:06: [io 0x4080-0x40ff] has been reserved
 [KERNEL] system 00:06: [io 0x4400-0x447f] has been reserved
 [KERNEL] system 00:06: [io 0x4480-0x44ff] has been reserved
 [KERNEL] system 00:06: [io 0x4800-0x487f] has been reserved
 [KERNEL] system 00:06: [io 0x4880-0x48ff] has been reserved
 [KERNEL] system 00:06: [mem 0x000d0000-0x000d3fff window] has been reserved
 [KERNEL] system 00:06: [mem 0x000d4000-0x000d7fff window] has been reserved
 [KERNEL] system 00:06: [mem 0x000de000-0x000dffff window] has been reserved
 [KERNEL] system 00:06: [mem 0xfefe2000-0xfefe3fff] has been reserved
 [KERNEL] system 00:06: [mem 0xfefe1000-0xfefe1fff] has been reserved
 [KERNEL] system 00:06: [mem 0xfee01000-0xfeefffff] has been reserved
 [KERNEL] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
 [KERNEL] pnp 00:07: [mem 0xfed00000-0xfed00fff]
 [KERNEL] pnp 00:07: [irq 2 disabled]
 [KERNEL] pnp 00:07: [irq 8]
 [KERNEL] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
 [KERNEL] pnp 00:08: [io 0x0070-0x0071]
 [KERNEL] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
 [KERNEL] pnp 00:09: [mem 0xfec00000-0xfec00fff]
 [KERNEL] pnp 00:09: [mem 0xfee00000-0xfee00fff]
 [KERNEL] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
 [KERNEL] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
 [KERNEL] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
 [KERNEL] pnp 00:0a: [mem 0xfc000000-0xfdffffff]
 [KERNEL] system 00:0a: [mem 0xfc000000-0xfdffffff] has been reserved
 [KERNEL] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
 [KERNEL] pnp 00:0b: [mem 0x00000000-0x0009ffff]
 [KERNEL] pnp 00:0b: [mem 0x000c0000-0x000cffff]
 [KERNEL] pnp 00:0b: [mem 0x000e0000-0x000fffff]
 [KERNEL] pnp 00:0b: [mem 0x00100000-0x3fffffff]
 [KERNEL] pnp 00:0b: [mem 0xfec00000-0xffffffff]
 [KERNEL] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
 [KERNEL] system 00:0b: [mem 0x000c0000-0x000cffff] could not be reserved
 [KERNEL] system 00:0b: [mem 0x000e0000-0x000fffff] could not be reserved
 [KERNEL] system 00:0b: [mem 0x00100000-0x3fffffff] could not be reserved
 [KERNEL] system 00:0b: [mem 0xfec00000-0xffffffff] could not be reserved
 [KERNEL] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
 [KERNEL] pnp: PnP ACPI: found 12 devices
 [KERNEL] ACPI: ACPI bus type pnp unregistered
 [KERNEL] Switching to clocksource acpi_pm
 [KERNEL] PCI: max bus depth: 1 pci_try_num: 2
 [KERNEL] pci 0000:00:09.0: PCI bridge to [bus 01-01]
 [KERNEL] pci 0000:00:09.0: bridge window [io disabled]
 [KERNEL] pci 0000:00:09.0: bridge window [mem disabled]
 [KERNEL] pci 0000:00:09.0: bridge window [mem pref disabled]
 [KERNEL] pci 0000:00:0c.0: PCI bridge to [bus 02-02]
 [KERNEL] pci 0000:00:0c.0: bridge window [io disabled]
 [KERNEL] pci 0000:00:0c.0: bridge window [mem disabled]
 [KERNEL] pci 0000:00:0c.0: bridge window [mem pref disabled]
 [KERNEL] pci 0000:00:10.0: PCI bridge to [bus 03-03]
 [KERNEL] pci 0000:00:10.0: bridge window [io 0xd000-0xdfff]
 [KERNEL] pci 0000:00:10.0: bridge window [mem 0xfaf00000-0xfbffffff]
 [KERNEL] pci 0000:00:10.0: bridge window [mem 0xe0000000-0xf9ffffff 64bit pref]
 [KERNEL] pci 0000:00:15.0: PCI bridge to [bus 04-04]
 [KERNEL] pci 0000:00:15.0: bridge window [io disabled]
 [KERNEL] pci 0000:00:15.0: bridge window [mem disabled]
 [KERNEL] pci 0000:00:15.0: bridge window [mem pref disabled]
 [KERNEL] pci 0000:00:16.0: PCI bridge to [bus 05-05]
 [KERNEL] pci 0000:00:16.0: bridge window [io 0xe000-0xefff]
 [KERNEL] pci 0000:00:16.0: bridge window [mem 0xfea00000-0xfeafffff]
 [KERNEL] pci 0000:00:16.0: bridge window [mem pref disabled]
 [KERNEL] pci 0000:00:17.0: PCI bridge to [bus 06-06]
 [KERNEL] pci 0000:00:17.0: bridge window [io disabled]
 [KERNEL] pci 0000:00:17.0: bridge window [mem 0xfeb00000-0xfebfffff]
 [KERNEL] pci 0000:00:17.0: bridge window [mem pref disabled]
 [KERNEL] pci 0000:00:18.0: PCI bridge to [bus 07-07]
 [KERNEL] pci 0000:00:18.0: bridge window [io disabled]
 [KERNEL] pci 0000:00:18.0: bridge window [mem disabled]
 [KERNEL] pci 0000:00:18.0: bridge window [mem pref disabled]
 [KERNEL] pci 0000:00:09.0: setting latency timer to 64
 [KERNEL] ACPI: PCI Interrupt Link [LRP0] enabled at IRQ 23
 [KERNEL] pci 0000:00:0c.0: PCI INT A -> Link[LRP0] -> GSI 23 (level, low) -> IRQ 23
 [KERNEL] pci 0000:00:0c.0: setting latency timer to 64
 [KERNEL] pci 0000:00:10.0: setting latency timer to 64
 [KERNEL] ACPI: PCI Interrupt Link [LRP3] enabled at IRQ 22
 [KERNEL] pci 0000:00:15.0: PCI INT A -> Link[LRP3] -> GSI 22 (level, low) -> IRQ 22
 [KERNEL] pci 0000:00:15.0: setting latency timer to 64
 [KERNEL] ACPI: PCI Interrupt Link [LRP4] enabled at IRQ 21
 [KERNEL] pci 0000:00:16.0: PCI INT A -> Link[LRP4] -> GSI 21 (level, low) -> IRQ 21
 [KERNEL] pci 0000:00:16.0: setting latency timer to 64
 [KERNEL] ACPI: PCI Interrupt Link [LRP5] enabled at IRQ 20
 [KERNEL] pci 0000:00:17.0: PCI INT A -> Link[LRP5] -> GSI 20 (level, low) -> IRQ 20
 [KERNEL] pci 0000:00:17.0: setting latency timer to 64
 [KERNEL] ACPI: PCI Interrupt Link [LRP6] enabled at IRQ 23
 [KERNEL] pci 0000:00:18.0: PCI INT A -> Link[LRP6] -> GSI 23 (level, low) -> IRQ 23
 [KERNEL] pci 0000:00:18.0: setting latency timer to 64
 [KERNEL] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
 [KERNEL] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
 [KERNEL] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
 [KERNEL] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
 [KERNEL] pci_bus 0000:00: resource 8 [mem 0x40000000-0xfbffffff]
 [KERNEL] pci_bus 0000:00: resource 9 [mem 0xfe000000-0xfebfffff]
 [KERNEL] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
 [KERNEL] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
 [KERNEL] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
 [KERNEL] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
 [KERNEL] pci_bus 0000:01: resource 8 [mem 0x40000000-0xfbffffff]
 [KERNEL] pci_bus 0000:01: resource 9 [mem 0xfe000000-0xfebfffff]
 [KERNEL] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
 [KERNEL] pci_bus 0000:03: resource 1 [mem 0xfaf00000-0xfbffffff]
 [KERNEL] pci_bus 0000:03: resource 2 [mem 0xe0000000-0xf9ffffff 64bit pref]
 [KERNEL] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
 [KERNEL] pci_bus 0000:05: resource 1 [mem 0xfea00000-0xfeafffff]
 [KERNEL] pci_bus 0000:06: resource 1 [mem 0xfeb00000-0xfebfffff]
 [KERNEL] NET: Registered protocol family 2
 [KERNEL] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
 [KERNEL] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
 [KERNEL] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
 [KERNEL] TCP: Hash tables configured (established 131072 bind 65536)
 [KERNEL] TCP reno registered
 [KERNEL] UDP hash table entries: 512 (order: 1, 8192 bytes)
 [KERNEL] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
 [KERNEL] NET: Registered protocol family 1
 [KERNEL] pci 0000:03:00.0: Boot video device
 [KERNEL] PCI: CLS 64 bytes, default 64
 [KERNEL] Freeing initrd memory: 3924k freed
 [KERNEL] ROMFS MTD (C) 2007 Red Hat, Inc.
 [KERNEL] msgmni has been set to 1768
 [KERNEL] io scheduler noop registered
 [KERNEL] io scheduler cfq registered (default)
 [KERNEL] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
 [KERNEL] ACPI: Power Button [PWRB]
 [KERNEL] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
 [KERNEL] ACPI: Power Button [PWRF]
 [KERNEL] ACPI: acpi_idle registered with cpuidle
 [KERNEL] brd: module loaded
 [KERNEL] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
 [KERNEL] ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96
 [KERNEL] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
 [KERNEL] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
 [KERNEL] ehci_hcd 0000:00:04.1: setting latency timer to 64
 [KERNEL] ehci_hcd 0000:00:04.1: EHCI Host Controller
 [KERNEL] drivers/usb/core/inode.c: creating file 'devices'
 [KERNEL] drivers/usb/core/inode.c: creating file '001'
 [KERNEL] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
 [KERNEL] ehci_hcd 0000:00:04.1: reset hcs_params 0x101c86 dbg=1 cc=1 pcc=12 !ppc ports=6
 [KERNEL] ehci_hcd 0000:00:04.1: reset portroute 0 0 0 0 0 0 
 [KERNEL] ehci_hcd 0000:00:04.1: reset hcc_params a086 caching frame 256/512/1024 park
 [KERNEL] ehci_hcd 0000:00:04.1: park 0
 [KERNEL] ehci_hcd 0000:00:04.1: debug port 1
 [KERNEL] ehci_hcd 0000:00:04.1: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT
 [KERNEL] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
 [KERNEL] ehci_hcd 0000:00:04.1: supports USB remote wakeup
 [KERNEL] ehci_hcd 0000:00:04.1: irq 22, io mem 0xfae7ec00
 [KERNEL] ehci_hcd 0000:00:04.1: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT
 [KERNEL] ehci_hcd 0000:00:04.1: init command 0010005 (park)=0 ithresh=1 period=512 RUN
 [KERNEL] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
 [KERNEL] usb usb1: default language 0x0409
 [KERNEL] usb usb1: udev 1, busnum 1, minor = 0
 [KERNEL] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
 [KERNEL] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
 [KERNEL] usb usb1: Product: EHCI Host Controller
 [KERNEL] usb usb1: Manufacturer: Linux 3.0.0 ehci_hcd
 [KERNEL] usb usb1: SerialNumber: 0000:00:04.1
 [KERNEL] usb usb1: usb_probe_device
 [KERNEL] usb usb1: configuration #1 chosen from 1 choice
 [KERNEL] usb usb1: adding 1-0:1.0 (config #1, interface 0)
 [KERNEL] hub 1-0:1.0: usb_probe_interface
 [KERNEL] hub 1-0:1.0: usb_probe_interface - got id
 [KERNEL] hub 1-0:1.0: USB hub found
 [KERNEL] hub 1-0:1.0: 6 ports detected
 [KERNEL] hub 1-0:1.0: standalone hub
 [KERNEL] hub 1-0:1.0: no power switching (usb 1.0)
 [KERNEL] hub 1-0:1.0: individual port over-current protection
 [KERNEL] hub 1-0:1.0: power on to power good time: 20ms
 [KERNEL] hub 1-0:1.0: local power source is good
 [KERNEL] hub 1-0:1.0: trying to enable port power on non-switchable hub
 [KERNEL] drivers/usb/core/inode.c: creating file '001'
 [KERNEL] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 21
 [KERNEL] ehci_hcd 0000:00:06.1: PCI INT B -> Link[UB12] -> GSI 21 (level, low) -> IRQ 21
 [KERNEL] ehci_hcd 0000:00:06.1: setting latency timer to 64
 [KERNEL] ehci_hcd 0000:00:06.1: EHCI Host Controller
 [KERNEL] drivers/usb/core/inode.c: creating file '002'
 [KERNEL] ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
 [KERNEL] ehci_hcd 0000:00:06.1: reset hcs_params 0x101c86 dbg=1 cc=1 pcc=12 !ppc ports=6
 [KERNEL] ehci_hcd 0000:00:06.1: reset portroute 0 0 0 0 0 0 
 [KERNEL] ehci_hcd 0000:00:06.1: reset hcc_params a086 caching frame 256/512/1024 park
 [KERNEL] ehci_hcd 0000:00:06.1: park 0
 [KERNEL] ehci_hcd 0000:00:06.1: debug port 1
 [KERNEL] ehci_hcd 0000:00:06.1: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT
 [KERNEL] ehci_hcd 0000:00:06.1: cache line size of 64 is not supported
 [KERNEL] ehci_hcd 0000:00:06.1: supports USB remote wakeup
 [KERNEL] ehci_hcd 0000:00:06.1: irq 21, io mem 0xfae7e800
 [KERNEL] ehci_hcd 0000:00:06.1: reset command 0080b02 park=3 ithresh=8 period=1024 Reset HALT
 [KERNEL] ehci_hcd 0000:00:06.1: init command 0010005 (park)=0 ithresh=1 period=512 RUN
 [KERNEL] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00
 [KERNEL] usb usb2: default language 0x0409
 [KERNEL] usb usb2: udev 1, busnum 2, minor = 128
 [KERNEL] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
 [KERNEL] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
 [KERNEL] usb usb2: Product: EHCI Host Controller
 [KERNEL] usb usb2: Manufacturer: Linux 3.0.0 ehci_hcd
 [KERNEL] usb usb2: SerialNumber: 0000:00:06.1
 [KERNEL] usb usb2: usb_probe_device
 [KERNEL] usb usb2: configuration #1 chosen from 1 choice
 [KERNEL] usb usb2: adding 2-0:1.0 (config #1, interface 0)
 [KERNEL] hub 2-0:1.0: usb_probe_interface
 [KERNEL] hub 2-0:1.0: usb_probe_interface - got id
 [KERNEL] hub 2-0:1.0: USB hub found
 [KERNEL] hub 2-0:1.0: 6 ports detected
 [KERNEL] hub 2-0:1.0: standalone hub
 [KERNEL] hub 2-0:1.0: no power switching (usb 1.0)
 [KERNEL] hub 2-0:1.0: individual port over-current protection
 [KERNEL] hub 2-0:1.0: power on to power good time: 20ms
 [KERNEL] hub 2-0:1.0: local power source is good
 [KERNEL] hub 2-0:1.0: trying to enable port power on non-switchable hub
 [KERNEL] drivers/usb/core/inode.c: creating file '001'
 [KERNEL] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
 [KERNEL] ohci_hcd: block sizes: ed 64 td 64
 [KERNEL] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20
 [KERNEL] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20
 [KERNEL] ohci_hcd 0000:00:04.0: setting latency timer to 64
 [KERNEL] ohci_hcd 0000:00:04.0: OHCI Host Controller
 [KERNEL] drivers/usb/core/inode.c: creating file '003'
 [KERNEL] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
 [KERNEL] ohci_hcd 0000:00:04.0: created debug files
 [KERNEL] ohci_hcd 0000:00:04.0: supports USB remote wakeup
 [KERNEL] ohci_hcd 0000:00:04.0: irq 20, io mem 0xfae7f000
 [KERNEL] ohci_hcd 0000:00:04.0: OHCI controller state
 [KERNEL] ohci_hcd 0000:00:04.0: OHCI 1.0, NO legacy support registers
 [KERNEL] ohci_hcd 0000:00:04.0: control 0x683 RWE RWC HCFS=operational CBSR=3
 [KERNEL] ohci_hcd 0000:00:04.0: cmdstatus 0x00000 SOC=0
 [KERNEL] ohci_hcd 0000:00:04.0: intrstatus 0x00000004 SF
 [KERNEL] ohci_hcd 0000:00:04.0: intrenable 0x8000005a MIE RHSC UE RD WDH
 [KERNEL] ohci_hcd 0000:00:04.0: hcca frame #0003
 [KERNEL] ohci_hcd 0000:00:04.0: roothub.a 01001206 POTPGT=1 NOCP NPS NDP=6(6)
 [KERNEL] ohci_hcd 0000:00:04.0: roothub.b 00000000 PPCM=0000 DR=0000
 [KERNEL] ohci_hcd 0000:00:04.0: roothub.status 00008000 DRWE
 [KERNEL] ohci_hcd 0000:00:04.0: roothub.portstatus [0] 0x00000100 PPS
 [KERNEL] ohci_hcd 0000:00:04.0: roothub.portstatus [1] 0x00000100 PPS
 [KERNEL] ohci_hcd 0000:00:04.0: roothub.portstatus [2] 0x00000100 PPS
 [KERNEL] ohci_hcd 0000:00:04.0: roothub.portstatus [3] 0x00000100 PPS
 [KERNEL] ohci_hcd 0000:00:04.0: roothub.portstatus [4] 0x00000100 PPS
 [KERNEL] ohci_hcd 0000:00:04.0: roothub.portstatus [5] 0x00000100 PPS
 [KERNEL] usb usb3: default language 0x0409
 [KERNEL] usb usb3: udev 1, busnum 3, minor = 256
 [KERNEL] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
 [KERNEL] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
 [KERNEL] usb usb3: Product: OHCI Host Controller
 [KERNEL] usb usb3: Manufacturer: Linux 3.0.0 ohci_hcd
 [KERNEL] usb usb3: SerialNumber: 0000:00:04.0
 [KERNEL] usb usb3: usb_probe_device
 [KERNEL] usb usb3: configuration #1 chosen from 1 choice
 [KERNEL] usb usb3: adding 3-0:1.0 (config #1, interface 0)
 [KERNEL] hub 3-0:1.0: usb_probe_interface
 [KERNEL] hub 3-0:1.0: usb_probe_interface - got id
 [KERNEL] hub 3-0:1.0: USB hub found
 [KERNEL] hub 3-0:1.0: 6 ports detected
 [KERNEL] hub 3-0:1.0: standalone hub
 [KERNEL] hub 3-0:1.0: no power switching (usb 1.0)
 [KERNEL] hub 3-0:1.0: no over-current protection
 [KERNEL] hub 3-0:1.0: power on to power good time: 2ms
 [KERNEL] hub 3-0:1.0: local power source is good
 [KERNEL] hub 3-0:1.0: trying to enable port power on non-switchable hub
 [KERNEL] drivers/usb/core/inode.c: creating file '001'
 [KERNEL] ehci_hcd 0000:00:04.1: HS companion for 0000:00:04.0
 [KERNEL] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 23
 [KERNEL] ohci_hcd 0000:00:06.0: PCI INT A -> Link[UB11] -> GSI 23 (level, low) -> IRQ 23
 [KERNEL] ohci_hcd 0000:00:06.0: setting latency timer to 64
 [KERNEL] ohci_hcd 0000:00:06.0: OHCI Host Controller
 [KERNEL] drivers/usb/core/inode.c: creating file '004'
 [KERNEL] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
 [KERNEL] ohci_hcd 0000:00:06.0: created debug files
 [KERNEL] ohci_hcd 0000:00:06.0: supports USB remote wakeup
 [KERNEL] ohci_hcd 0000:00:06.0: irq 23, io mem 0xfae7d000
 [KERNEL] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0000
 [KERNEL] ehci_hcd 0000:00:06.1: GetStatus port:3 status 001803 0 ACK POWER sig=j CSC CONNECT
 [KERNEL] hub 2-0:1.0: port 3: status 0501 change 0001
 [KERNEL] ehci_hcd 0000:00:06.1: GetStatus port:4 status 001803 0 ACK POWER sig=j CSC CONNECT
 [KERNEL] hub 2-0:1.0: port 4: status 0501 change 0001
 [KERNEL] ohci_hcd 0000:00:06.0: OHCI controller state
 [KERNEL] ohci_hcd 0000:00:06.0: OHCI 1.0, NO legacy support registers
 [KERNEL] ohci_hcd 0000:00:06.0: control 0x683 RWE RWC HCFS=operational CBSR=3
 [KERNEL] ohci_hcd 0000:00:06.0: cmdstatus 0x00000 SOC=0
 [KERNEL] ohci_hcd 0000:00:06.0: intrstatus 0x00000004 SF
 [KERNEL] ohci_hcd 0000:00:06.0: intrenable 0x8000005a MIE RHSC UE RD WDH
 [KERNEL] ohci_hcd 0000:00:06.0: hcca frame #0003
 [KERNEL] ohci_hcd 0000:00:06.0: roothub.a 01001206 POTPGT=1 NOCP NPS NDP=6(6)
 [KERNEL] ohci_hcd 0000:00:06.0: roothub.b 00000000 PPCM=0000 DR=0000
 [KERNEL] ohci_hcd 0000:00:06.0: roothub.status 00008000 DRWE
 [KERNEL] ohci_hcd 0000:00:06.0: roothub.portstatus [0] 0x00000100 PPS
 [KERNEL] ohci_hcd 0000:00:06.0: roothub.portstatus [1] 0x00000100 PPS
 [KERNEL] ohci_hcd 0000:00:06.0: roothub.portstatus [2] 0x00000100 PPS
 [KERNEL] ohci_hcd 0000:00:06.0: roothub.portstatus [3] 0x00000100 PPS
 [KERNEL] ohci_hcd 0000:00:06.0: roothub.portstatus [4] 0x00000100 PPS
 [KERNEL] ohci_hcd 0000:00:06.0: roothub.portstatus [5] 0x00000100 PPS
 [KERNEL] usb usb4: default language 0x0409
 [KERNEL] usb usb4: udev 1, busnum 4, minor = 384
 [KERNEL] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
 [KERNEL] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
 [KERNEL] usb usb4: Product: OHCI Host Controller
 [KERNEL] usb usb4: Manufacturer: Linux 3.0.0 ohci_hcd
 [KERNEL] usb usb4: SerialNumber: 0000:00:06.0
 [KERNEL] usb usb4: usb_probe_device
 [KERNEL] usb usb4: configuration #1 chosen from 1 choice
 [KERNEL] usb usb4: adding 4-0:1.0 (config #1, interface 0)
 [KERNEL] hub 4-0:1.0: usb_probe_interface
 [KERNEL] hub 4-0:1.0: usb_probe_interface - got id
 [KERNEL] hub 4-0:1.0: USB hub found
 [KERNEL] hub 4-0:1.0: 6 ports detected
 [KERNEL] hub 4-0:1.0: standalone hub
 [KERNEL] hub 4-0:1.0: no power switching (usb 1.0)
 [KERNEL] hub 4-0:1.0: no over-current protection
 [KERNEL] hub 4-0:1.0: power on to power good time: 2ms
 [KERNEL] hub 4-0:1.0: local power source is good
 [KERNEL] hub 4-0:1.0: trying to enable port power on non-switchable hub
 [KERNEL] drivers/usb/core/inode.c: creating file '001'
 [KERNEL] ehci_hcd 0000:00:06.1: HS companion for 0000:00:06.0
 [KERNEL] uhci_hcd: USB Universal Host Controller Interface driver
 [KERNEL] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
 [KERNEL] i8042: Detected active multiplexing controller, rev 1.1
 [KERNEL] serio: i8042 KBD port at 0x60,0x64 irq 1
 [KERNEL] serio: i8042 AUX0 port at 0x60,0x64 irq 12
 [KERNEL] serio: i8042 AUX1 port at 0x60,0x64 irq 12
 [KERNEL] serio: i8042 AUX2 port at 0x60,0x64 irq 12
 [KERNEL] serio: i8042 AUX3 port at 0x60,0x64 irq 12
 [KERNEL] mousedev: PS/2 mouse device common for all mice
 [KERNEL] input: PC Speaker as /devices/platform/pcspkr/input/input2
 [KERNEL] cpuidle: using governor ladder
 [KERNEL] usbcore: registered new interface driver usbhid
 [KERNEL] usbhid: USB HID core driver
 [KERNEL] TCP cubic registered
 [KERNEL] NET: Registered protocol family 17
 [KERNEL] Using IPI Shortcut mode
 [KERNEL] hub 3-0:1.0: state 7 ports 6 chg 0000 evt 0000
 [KERNEL] RAMDISK: lzo image found at block 0
 [KERNEL] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
 [KERNEL] hub 2-0:1.0: state 7 ports 6 chg 0018 evt 0000
 [KERNEL] hub 2-0:1.0: port 3, status 0501, change 0000, 480 Mb/s
 [KERNEL] ehci_hcd 0000:00:06.1: port 3 high speed
 [KERNEL] ehci_hcd 0000:00:06.1: GetStatus port:3 status 001005 0 ACK POWER sig=se0 PE CONNECT
 [KERNEL] VFS: Mounted root (romfs filesystem) readonly on device 1:0.
 [KERNEL] Freeing unused kernel memory: 292k freed
 [KERNEL] usb 2-3: new high speed USB device number 2 using ehci_hcd
 [KERNEL] ehci_hcd 0000:00:06.1: port 3 high speed
 [KERNEL] ehci_hcd 0000:00:06.1: GetStatus port:3 status 001005 0 ACK POWER sig=se0 PE CONNECT
 [KERNEL] usb 2-3: default language 0x0409
 [KERNEL] usb 2-3: udev 2, busnum 2, minor = 129
 [KERNEL] usb 2-3: New USB device found, idVendor=05e3, idProduct=0716
 [KERNEL] usb 2-3: New USB device strings: Mfr=0, Product=1, SerialNumber=2
 [KERNEL] usb 2-3: Product: USB Storage
 [KERNEL] usb 2-3: SerialNumber: 000000009732
 [KERNEL] usb 2-3: usb_probe_device
 [KERNEL] usb 2-3: configuration #1 chosen from 1 choice
 [KERNEL] usb 2-3: adding 2-3:1.0 (config #1, interface 0)
 [KERNEL] drivers/usb/core/inode.c: creating file '002'
 [KERNEL] hub 2-0:1.0: port 4, status 0501, change 0000, 480 Mb/s
 [KERNEL] ehci_hcd 0000:00:06.1: port 4 full speed --> companion
 [KERNEL] ehci_hcd 0000:00:06.1: GetStatus port:4 status 003001 0 ACK POWER OWNER sig=se0 CONNECT
 [KERNEL] hub 2-0:1.0: port 4 not reset yet, waiting 50ms
 [KERNEL] ehci_hcd 0000:00:06.1: GetStatus port:4 status 003802 0 ACK POWER OWNER sig=j CSC
 [KERNEL] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
 [KERNEL] ohci_hcd 0000:00:06.0: GetStatus roothub.portstatus [3] = 0x00010101 CSC PPS CCS
 [KERNEL] hub 4-0:1.0: port 4, status 0101, change 0001, 12 Mb/s
 [KERNEL] hub 4-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x101
 [pfac] Ok, PID 459.
 [initrd] WTware shell v.5.0.1
 [initrd] PCIID: 10de:0a82 class 00 subclass 00.
 [initrd] PCIID: 10de:0a88 class 00 subclass 00.
 [initrd] PCIID: 10de:0aad class 01 subclass 00.
 [initrd] PCIID: 10de:0aa4 class 00 subclass 00.
 [initrd] PCIID: 10de:0aa2 class 05 subclass 00.
 [initrd] PCIID: 10de:0a89 class 00 subclass 00.
 [initrd] PCIID: 10de:0aa3 class 40 subclass 00.
 [initrd] PCIID: 10de:0aa5 class 03 subclass 10.
 [initrd] PCIID: 10de:0aa6 class 03 subclass 20.
 [initrd] PCIID: 10de:0aa7 class 03 subclass 10.
 [initrd] PCIID: 10de:0aa9 class 03 subclass 20.
 [initrd] PCIID: 10de:0ac0 class 03 subclass 00.
 [initrd] PCIID: 10de:0aab class 04 subclass 01.
 [initrd] PCIID: 10de:0ac4 class 04 subclass 00.
 [initrd] WARNING: multiple devices same type: 10de:0ac4 and 10de:0aab. One of them will not work.
 [initrd] PCIID: 10de:0aa0 class 04 subclass 00.
 [initrd] WARNING: multiple devices same type: 10de:0aa0 and 10de:0aab. One of them will not work.
 [initrd] PCIID: 10de:0ac6 class 04 subclass 00.
 [initrd] WARNING: multiple devices same type: 10de:0ac6 and 10de:0aab. One of them will not work.
 [initrd] PCIID: 10de:0ac7 class 04 subclass 00.
 [initrd] WARNING: multiple devices same type: 10de:0ac7 and 10de:0aab. One of them will not work.
 [initrd] PCIID: 10de:0ac7 class 04 subclass 00.
 [initrd] WARNING: multiple devices same type: 10de:0ac7 and 10de:0aab. One of them will not work.
 [initrd] PCIID: 10de:0ac7 class 04 subclass 00.
 [initrd] WARNING: multiple devices same type: 10de:0ac7 and 10de:0aab. One of them will not work.
 [initrd] PCIID: 10de:087d class 00 subclass 00.
 [initrd] PCIID: 1969:1063 class 00 subclass 00.
 [initrd] PCIID: 168c:002b class 80 subclass 00.
 [initrd] PCIID, VGA: 10de:0aa5.
 [initrd] PCIID, second VGA: 10de:0ac0.
 [initrd] PCIID, sound: 10de:0aab.
 /--- FILE "/proc/bus/usb/devices" -----------------------
 | T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 6
 | B: Alloc= 19/900 us ( 2%), #Int= 1, #Iso= 0
 | D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
 | P: Vendor=1d6b ProdID=0001 Rev= 3.00
 | S: Manufacturer=Linux 3.0.0 ohci_hcd
 | S: Product=OHCI Host Controller
 | S: SerialNumber=0000:00:06.0
 | C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
 | I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
 | E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
 | T: Bus=04 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
 | D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
 | P: Vendor=09da ProdID=054f Rev= 1.02
 | S: Manufacturer=A4TECH
 | S: Product=USB Device
 | C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=100mA
 | I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid
 | E: Ad=81(I) Atr=03(Int.) MxPS= 12 Ivl=1ms
 | I:* If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid
 | E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=1ms
 | T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 6
 | B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
 | D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
 | P: Vendor=1d6b ProdID=0001 Rev= 3.00
 | S: Manufacturer=Linux 3.0.0 ohci_hcd
 | S: Product=OHCI Host Controller
 | S: SerialNumber=0000:00:04.0
 | C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
 | I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
 | E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
 | T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6
 | B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
 | D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
 | P: Vendor=1d6b ProdID=0002 Rev= 3.00
 | S: Manufacturer=Linux 3.0.0 ehci_hcd
 | S: Product=EHCI Host Controller
 | S: SerialNumber=0000:00:06.1
 | C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
 | I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
 | E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
 | T: Bus=02 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
 | D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
 | P: Vendor=05e3 ProdID=0716 Rev=97.32
 | S: Product=USB Storage
 | S: SerialNumber=000000009732
 | C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
 | I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
 | E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
 | E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
 | T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6
 | B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
 | D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
 | P: Vendor=1d6b ProdID=0002 Rev= 3.00
 | S: Manufacturer=Linux 3.0.0 ehci_hcd
 | S: Product=EHCI Host Controller
 | S: SerialNumber=0000:00:04.1
 | C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
 | I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
 | E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms
 \----------------------------------------------------
 [KERNEL] ohci_hcd 0000:00:06.0: GetStatus roothub.portstatus [3] = 0x00100103 PRSC PPS PES CCS
 [KERNEL] usb 4-4: new full speed USB device number 2 using ohci_hcd
 [KERNEL] ohci_hcd 0000:00:06.0: GetStatus roothub.portstatus [3] = 0x00100103 PRSC PPS PES CCS
 [KERNEL] usb 4-4: ep0 maxpacket = 8
 [KERNEL] usb 4-4: skipped 1 descriptor after interface
 [KERNEL] usb 4-4: skipped 1 descriptor after interface
 [KERNEL] usb 4-4: default language 0x0409
 [KERNEL] usb 4-4: udev 2, busnum 4, minor = 385
 [KERNEL] usb 4-4: New USB device found, idVendor=09da, idProduct=054f
 [KERNEL] usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
 [KERNEL] usb 4-4: Product: USB Device
 [KERNEL] usb 4-4: Manufacturer: A4TECH
 [KERNEL] usb 4-4: usb_probe_device
 [KERNEL] usb 4-4: configuration #1 chosen from 1 choice
 [KERNEL] usb 4-4: adding 4-4:1.0 (config #1, interface 0)
 [KERNEL] usbhid 4-4:1.0: usb_probe_interface
 [KERNEL] usbhid 4-4:1.0: usb_probe_interface - got id
 [KERNEL] input: A4TECH USB Device as /devices/pci0000:00/0000:00:06.0/usb4/4-4/4-4:1.0/input/input4
 [KERNEL] generic-usb 0003:09DA:054F.0001: input: USB HID v1.11 Keyboard [A4TECH USB Device] on usb-0000:00:06.0-4/input0
 [KERNEL] usb 4-4: adding 4-4:1.1 (config #1, interface 1)
 [KERNEL] usbhid 4-4:1.1: usb_probe_interface
 [KERNEL] usbhid 4-4:1.1: usb_probe_interface - got id
 [KERNEL] input: A4TECH USB Device as /devices/pci0000:00/0000:00:06.0/usb4/4-4/4-4:1.1/input/input5
 [KERNEL] generic-usb 0003:09DA:054F.0002: input: USB HID v1.11 Mouse [A4TECH USB Device] on usb-0000:00:06.0-4/input1
 [KERNEL] drivers/usb/core/inode.c: creating file '002'
 [KERNEL] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0010
 [KERNEL] hub 4-0:1.0: state 7 ports 6 chg 0000 evt 0010
 [initrd] Loading ethernet drivers.
 [initrd] +--- Executing "/sbin/modprobe atl1c"
 [KERNEL] ACPI: PCI Interrupt Link [LN4A] enabled at IRQ 19
 [KERNEL] atl1c 0000:05:00.0: PCI INT A -> Link[LN4A] -> GSI 19 (level, low) -> IRQ 19
 [KERNEL] atl1c 0000:05:00.0: setting latency timer to 64
 [KERNEL] Refined TSC clocksource calibration: 1599.991 MHz.
 [KERNEL] Switching to clocksource tsc
 [KERNEL] atl1c 0000:05:00.0: version 1.0.1.0-NAPI
 [initrd] +- Errorlevel: 0, output:
 [initrd] +------------------------
 [initrd] NIC module atl1c.ko loaded.
 [KERNEL] atl1c 0000:05:00.0: Unable to allocate MSI interrupt Error: -1
 [KERNEL] ohci_hcd 0000:00:04.0: auto-stop root hub
 [KERNEL] atl1c 0000:05:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
 [initrd] dhcp: 343 bytes from 192.168.1.100.
 [initrd] 00000000:000001430000000000110000c0a80164c0a8015b004300440143000002010600
 [initrd] 00000020:67458b6b0000000000000000c0a8015bc0a801660000000090fba629c5690000
 [initrd] 00000040:0000000000000000000000000000000000000000000000000000000000000000
 [initrd] 00000060:0000000000000000000000000000000000000000000000000000000000000000
 [initrd] 00000080:0000000000000000352e302e312f7774776172652e7078650000000000000000
 [initrd] 000000a0:0000000000000000000000000000000000000000000000000000000000000000
 [initrd] 000000c0:0000000000000000000000000000000000000000000000000000000000000000
 [initrd] 000000e0:0000000000000000000000000000000000000000000000000000000000000000
 [initrd] 00000100:0000000000000000638253633501023604c0a80164330400001c200104ffffff
 [initrd] 00000120:000304c0a8010a0604c0a801640f056c6f63616c122038333538346262303830
 [initrd] 00000140:33306232393037393632613062656331333238663763ff
 [initrd] dhcp: 343 bytes from 192.168.1.100.
 [initrd] 00000000:000001430000000000110000c0a80164c0a8015b004300440143000002010600
 [initrd] 00000020:67458b6b0000000000000000c0a8015bc0a801660000000090fba629c5690000
 [initrd] 00000040:0000000000000000000000000000000000000000000000000000000000000000
 [initrd] 00000060:0000000000000000000000000000000000000000000000000000000000000000
 [initrd] 00000080:0000000000000000352e302e312f7774776172652e7078650000000000000000
 [initrd] 000000a0:0000000000000000000000000000000000000000000000000000000000000000
 [initrd] 000000c0:0000000000000000000000000000000000000000000000000000000000000000
 [initrd] 000000e0:0000000000000000000000000000000000000000000000000000000000000000
 [initrd] 00000100:0000000000000000638253633501053604c0a80164330400001c200104ffffff
 [initrd] 00000120:000304c0a8010a0604c0a801640f056c6f63616c122038333538346262303830
 [initrd] 00000140:33306232393037393632613062656331333238663763ff
 [initrd] dhcp: server address 192.168.1.100.
 [initrd] dhcp: 192.168.1.91/255.255.255.0.
 [initrd] dhcp: default gateway 192.168.1.10.
 [initrd] dhcp: DNS 192.168.1.100.
 [initrd] dhcp: domain local.
 [initrd] dhcp: TFTP 192.168.1.102.
 [initrd] dhcp: boot file (header) 5.0.1/wtware.pxe.
 [initrd] TFTP binary "5.0.1/", configs prefix "", using "/" slash.
 [initrd] dhcp: wtpassword hash 83584bb08030b2907962a0bec1328f7c.
 Send broadcast WTCU discover.
 [initrd] It isn't WTware5 TFTP server...
 [initrd] tftp: download file Everyone/list.wtc from 192.168.1.102.
 /--- FILE "/tmp/list.wtc" -----------------------
 | #
 | # Nienie iiaee??aaiuo oaeeia.
 | #
 | # Yoio ioaaeuiue iaoaieci iano?ieee oa?ieiaeia i?aaiacia?ai oieuei
 | # aey ?o?iiai eiioeao?e?iaaiey oa?ieiaeia. A?aoe?aneee eiioeao?aoi?
 | # ia ?eoaao list.wtc, ia ?eoaao e ia iicaieyao ?aaaeoe?iaaou oaeeu
 | # ec eaoaeiaa ListIncludes. Iiyoiio iaeucy iuoaouny iano?aeaaou iaei
 | # e oio ?a oa?ieiae e eiioeao?aoi?ii, e ?a?ac list.wtc.
 | #
 | # Oi?iao no?iee a yoii oaeea:
 | # 
 | # 01.02.03.04.05.06[([eiyiieuciaaoaey@][eiyoa?ieiaea])] [oaee [oaee ...]]] [# eiiiaioa?ee]
 | #
 | # I?eia?u:
 | #
 | # 02.03.04.05.06.07 file1
 | #
 | # Icia?aao, ?oi oa?ieiae n iae-aa?anii 02.03.04.05.06.07 i?i?eoaao
 | # ia?aiao?u ec oaeea ListIncludes/file1.
 | #
 | #
 | # 03.04.05.06.07.08(vasja@) file2
 | #
 | # Icia?aao, ?oi oa?ieiae n iae-aa?anii 03.04.05.06.07.08 i?i?eoaao
 | # ia?aiao?u ec oaeea ListIncludes/file2 e a ieioei "Aoia a Windows"
 | # iianoaaeo eiy iieuciaaoaey "vasja".
 | #
 | #
 | # 04.05.06.07.08.09(term5) file6 file7 # Eiii caiaeaaaooa.
 | #
 | # Icia?aao, ?oi oa?ieiaeo n iae-aa?anii 04.05.06.07.08.09 aoaao
 | # i?enaiaii eiy term5, aiaeiae?ii oeacaie? ia?aiao?a clienthostname,
 | # e ii i?i?eoaao ia?aiao?u ec oaeeia ListIncludes/file6 e
 | # ListIncludes/file7.
 | #
 | #
 | # ?oiau ii?ii auei oeacuaaou eiy iieuciaaoaey ?onneeie aoeaaie, iaai
 | # ioe?uou yoio oaee a Notepad e nio?aieou n Encoding: Unicode.
 | #
 \----------------------------------------------------
 [initrd] tftp: download file Terminals/90.FB.A6.29.C5.69/config.wtc from 192.168.1.102.
 /--- FILE "/tmp/config.wtc" -----------------------
 | [BOM]
 | server=q2010
 | video=nouveau(f)
 | resolution=1920x1080
 | user=Администратор
 | bpp=16
 | refresh=60
 | #sound=oss
 | sound=on
 | #sound_rate=48000
 | disk=usb
 | connection q2010
 | connection q2008
 | connection q2007
 | connection i-serv
 | next screen
 | connection q2010
 | connection q2008
 | connection q2007
 | connection i-serv
 | next screen
 | connection q2010
 | connection q2008
 | connection q2007
 | connection i-serv
 | connection sergey.local
 | next screen
 | connection
 | connection q2010
 | connection q2008
 | connection q2007
 | connection i-serv
 | connection sergey.local
 \----------------------------------------------------
 [initrd] tftp: download file Everyone/all.wtc from 192.168.1.102.
 /--- FILE "/tmp/all.wtc" -----------------------
 | [BOM]
 | server=192.168.1.102
 | video=geode(X)
 | clipboard=on
 | mouse_accel_mult=1.5
 | doubleclick=600
 | rdpcompression=on
 \----------------------------------------------------
 [initrd] tftp: download file Everyone/wtware.lic from 192.168.1.102.
 [initrd] tftp: download file Connections/q2010.wtc from 192.168.1.102.
 /--- FILE "/tmp/tmp.wtc" -----------------------
 | [BOM]
 | server=192.168.1.102
 | smartcard=on
 \----------------------------------------------------
 [initrd] tftp: download file Connections/q2008.wtc from 192.168.1.102.
 /--- FILE "/tmp/tmp.wtc" -----------------------
 | [BOM]
 | server=192.168.1.45
 \----------------------------------------------------
 [initrd] tftp: download file Connections/q2007.wtc from 192.168.1.102.
 /--- FILE "/tmp/tmp.wtc" -----------------------
 | [BOM]
 | server=192.168.1.101
 \----------------------------------------------------
 [initrd] tftp: download file Connections/i-serv.wtc from 192.168.1.102.
 /--- FILE "/tmp/tmp.wtc" -----------------------
 | [BOM]
 | server=192.168.1.103
 \----------------------------------------------------
 [initrd] tftp: download file Connections/q2010.wtc from 192.168.1.102.
 /--- FILE "/tmp/tmp.wtc" -----------------------
 | [BOM]
 | server=192.168.1.102
 | smartcard=on
 \----------------------------------------------------
 [initrd] tftp: download file Connections/q2008.wtc from 192.168.1.102.
 /--- FILE "/tmp/tmp.wtc" -----------------------
 | [BOM]
 | server=192.168.1.45
 \----------------------------------------------------
 [initrd] tftp: download file Connections/q2007.wtc from 192.168.1.102.
 /--- FILE "/tmp/tmp.wtc" -----------------------
 | [BOM]
 | server=192.168.1.101
 \----------------------------------------------------
 [initrd] tftp: download file Connections/i-serv.wtc from 192.168.1.102.
 /--- FILE "/tmp/tmp.wtc" -----------------------
 | [BOM]
 | server=192.168.1.103
 \----------------------------------------------------
 [initrd] tftp: download file Connections/q2010.wtc from 192.168.1.102.
 /--- FILE "/tmp/tmp.wtc" -----------------------
 | [BOM]
 | server=192.168.1.102
 | smartcard=on
 \----------------------------------------------------
 [initrd] tftp: download file Connections/q2008.wtc from 192.168.1.102.
 /--- FILE "/tmp/tmp.wtc" -----------------------
 | [BOM]
 | server=192.168.1.45
 \----------------------------------------------------
 [initrd] tftp: download file Connections/q2007.wtc from 192.168.1.102.
 /--- FILE "/tmp/tmp.wtc" -----------------------
 | [BOM]
 | server=192.168.1.101
 \----------------------------------------------------
 [initrd] tftp: download file Connections/i-serv.wtc from 192.168.1.102.
 /--- FILE "/tmp/tmp.wtc" -----------------------
 | [BOM]
 | server=192.168.1.103
 \----------------------------------------------------
 [initrd] tftp: download file Connections/sergey.local.wtc from 192.168.1.102.
 /--- FILE "/tmp/tmp.wtc" -----------------------
 | [BOM]
 | server=sergey.local
 \----------------------------------------------------
 [initrd] tftp: download file Connections/q2010.wtc from 192.168.1.102.
 /--- FILE "/tmp/tmp.wtc" -----------------------
 | [BOM]
 | server=192.168.1.102
 | smartcard=on
 \----------------------------------------------------
 [initrd] tftp: download file Connections/q2008.wtc from 192.168.1.102.
 /--- FILE "/tmp/tmp.wtc" -----------------------
 | [BOM]
 | server=192.168.1.45
 \----------------------------------------------------
 [initrd] tftp: download file Connections/q2007.wtc from 192.168.1.102.
 /--- FILE "/tmp/tmp.wtc" -----------------------
 | [BOM]
 | server=192.168.1.101
 \----------------------------------------------------
 [initrd] tftp: download file Connections/i-serv.wtc from 192.168.1.102.
 /--- FILE "/tmp/tmp.wtc" -----------------------
 | [BOM]
 | server=192.168.1.103
 \----------------------------------------------------
 [initrd] tftp: download file Connections/sergey.local.wtc from 192.168.1.102.
 /--- FILE "/tmp/tmp.wtc" -----------------------
 | [BOM]
 | server=sergey.local
 \----------------------------------------------------
 /--- FILE "/etc/config.compiled" -----------------------
 | [BOM]
 | server=q2010
 | video=nouveau(f)
 | clipboard=on
 | mouse_accel_mult=1.5
 | doubleclick=600
 | rdpcompression=on
 | resolution=1920x1080
 | user=Администратор
 | bpp=16
 | refresh=60
 | sound=on
 | disk=usb
 | connection q2010
 | server=192.168.1.102
 | smartcard=on
 | connection q2008
 | server=192.168.1.45
 | connection q2007
 | server=192.168.1.101
 | connection i-serv
 | server=192.168.1.103
 | next screen
 | connection q2010
 | server=192.168.1.102
 | smartcard=on
 | connection q2008
 | server=192.168.1.45
 | connection q2007
 | server=192.168.1.101
 | connection i-serv
 | server=192.168.1.103
 | next screen
 | connection q2010
 | server=192.168.1.102
 | smartcard=on
 | connection q2008
 | server=192.168.1.45
 | connection q2007
 | server=192.168.1.101
 | connection i-serv
 | server=192.168.1.103
 | connection sergey.local
 | server=sergey.local
 | next screen
 | connection 
 | connection q2010
 | server=192.168.1.102
 | smartcard=on
 | connection q2008
 | server=192.168.1.45
 | connection q2007
 | server=192.168.1.101
 | connection i-serv
 | server=192.168.1.103
 | connection sergey.local
 | server=sergey.local
 \----------------------------------------------------
 [initrd] Hostname: "wtw90FBA629C569".
 RSHd listener active.
 Everyone can control terminal by http.
 [initrd] tftp: download and unpack file 5.0.1/packages/f from 192.168.1.102.
 [initrd] tftp: download and unpack file 5.0.1/packages/graphic from 192.168.1.102.
 [gm] WTware session manager v.5.0.1.
 [gm] New mode: 1920x1080, 16 bit, 60 Hz, modeline "", DDC enabled, connector 0.
 [gm] Mouse PnP: IMPS2 or EXPPS2?
 [gm] Mouse PnP: EXPPS2.
 [gm] +--- Executing "/sbin/modprobe drm"
 [KERNEL] Linux agpgart interface v0.103
 [gm] +- Errorlevel: 0, output:
 [KERNEL] [drm] Initialized drm 1.1.0 20060810
 [gm] +------------------------
 [gm] /sbin/modprobe nouveau 
 [gm] +--- Executing "/sbin/modprobe nouveau "
 [KERNEL] wmi: Mapper loaded
 [KERNEL] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 11
 [KERNEL] nouveau 0000:03:00.0: PCI INT A -> Link[SGRU] -> GSI 11 (level, low) -> IRQ 11
 [KERNEL] nouveau 0000:03:00.0: setting latency timer to 64
 [KERNEL] [drm] nouveau 0000:03:00.0: Detected an NV50 generation card (0x0ace80b1)
 [KERNEL] [drm] nouveau 0000:03:00.0: Attempting to load BIOS image from PRAMIN
 [KERNEL] [drm] nouveau 0000:03:00.0: ... appears to be valid
 [KERNEL] [drm] nouveau 0000:03:00.0: BIT BIOS found
 [KERNEL] [drm] nouveau 0000:03:00.0: Bios version 62.79.66.00
 [KERNEL] [drm] nouveau 0000:03:00.0: TMDS table version 2.0
 [KERNEL] [drm] nouveau 0000:03:00.0: Found Display Configuration Block version 4.0
 [KERNEL] [drm] nouveau 0000:03:00.0: Raw DCB entry 0: 02000300 0000001e
 [KERNEL] [drm] nouveau 0000:03:00.0: Raw DCB entry 1: 01000302 00000010
 [KERNEL] [drm] nouveau 0000:03:00.0: Raw DCB entry 2: 02011332 00020010
 [KERNEL] [drm] nouveau 0000:03:00.0: Raw DCB entry 3: 0000000e 00000000
 [KERNEL] [drm] nouveau 0000:03:00.0: DCB connector table: VHER 0x40 5 16 4
 [KERNEL] [drm] nouveau 0000:03:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07
 [KERNEL] [drm] nouveau 0000:03:00.0: 1: 0x00002161: type 0x61 idx 1 tag 0x08
 [KERNEL] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 0 at offset 0xDEFA
 [KERNEL] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 1 at offset 0xE1D2
 [KERNEL] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 2 at offset 0xE1D4
 [KERNEL] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 3 at offset 0xE295
 [KERNEL] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table 4 at offset 0xE35A
 [KERNEL] [drm] nouveau 0000:03:00.0: Parsing VBIOS init table at offset 0xE3BF
 [KERNEL] [drm] nouveau 0000:03:00.0: 0xE3BF: Condition still not met after 20ms, skipping following opcodes
 [KERNEL] [drm] nouveau 0000:03:00.0: timingset 255 does not exist
 [KERNEL] [drm] nouveau 0000:03:00.0: timingset 255 does not exist
 [KERNEL] [drm] nouveau 0000:03:00.0: timingset 255 does not exist
 [KERNEL] [drm] nouveau 0000:03:00.0: timingset 255 does not exist
 [KERNEL] [drm] nouveau 0000:03:00.0: 4 available performance level(s)
 [KERNEL] [drm] nouveau 0000:03:00.0: 0: memory 0MHz core 200MHz shader 400MHz voltage 1010mV fanspeed 60%
 [KERNEL] [drm] nouveau 0000:03:00.0: 1: memory 0MHz core 300MHz shader 600MHz voltage 1010mV fanspeed 100%
 [KERNEL] [drm] nouveau 0000:03:00.0: 2: memory 0MHz core 350MHz shader 800MHz voltage 1010mV fanspeed 100%
 [KERNEL] [drm] nouveau 0000:03:00.0: 3: memory 0MHz core 450MHz shader 1100MHz voltage 1010mV fanspeed 100%
 [KERNEL] [drm] nouveau 0000:03:00.0: c: memory 0MHz core 450MHz shader 1100MHz
 [KERNEL] [TTM] Zone kernel: Available graphics memory: 452876 kiB.
 [KERNEL] [TTM] Initializing pool allocator.
 [KERNEL] [drm] nouveau 0000:03:00.0: Detected 128MiB VRAM
 [KERNEL] [drm] nouveau 0000:03:00.0: Stolen system memory at: 0x0038000000
 [KERNEL] [drm] nouveau 0000:03:00.0: 64 MiB GART (aperture)
 [KERNEL] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
 [KERNEL] [drm] No driver support for vblank timestamp query.
 [KERNEL] [drm] nouveau 0000:03:00.0: allocated 1024x768 fb: 0x40000000, bo f6dc3400
 [KERNEL] fb0: nouveaufb frame buffer device
 [KERNEL] drm: registered panic notifier
 [KERNEL] [drm] Initialized nouveau 0.0.16 20090420 for 0000:03:00.0 on minor 0
 [gm] +- Errorlevel: 0, output:
 [gm] +------------------------
 [gm] Kernel drm/kms module loaded.
 [gm] count_fbs 0.
 [gm] count_crtcs 2.
 [gm] count_connectors 2.
 [gm] count_encoders 3.
 [gm] min_width 0, max_width 8192, min_height 0, max_height 8192.
 [gm] ======================
 [gm] connector_id 7.
 [gm] encoder_id 0.
 [gm] connector_type DVII (2).
 [gm] connector_type_id 1.
 [gm] connection 1.
 [gm] mmWidth 0, mmHeight 0.
 [gm] subpixel 0.
 [gm] count_modes 5.
 [gm] count_props 6.
 [gm] count_encoders 2.
 [gm] encoders_ptr [10] 
 [gm] encoders_ptr [11] 
 [gm] ======================
 [gm] ======================
 [gm] connector_id 12.
 [gm] encoder_id 0.
 [gm] connector_type HDMIA (11).
 [gm] connector_type_id 1.
 [gm] connection 2.
 [gm] mmWidth 0, mmHeight 0.
 [gm] subpixel 0.
 [gm] count_modes 0.
 [gm] count_props 4.
 [gm] count_encoders 1.
 [gm] encoders_ptr [13] 
 [gm] ======================
 [gm] ======================
 [gm] crtc_id 5.
 [gm] fb buffer_id 0 (disconnected from fb).
 [gm] x 0, y 0.
 [gm] mode_valid 0.
 [gm] Mode : clock 0 H 0 0 0 0 0 V 0 0 0 0 0 VR 0 flags 0x0000 type 0x0000.
 [gm] gamma_size 256.
 [gm] 0 connectors.
 [gm] ======================
 [gm] ======================
 [gm] crtc_id 6.
 [gm] fb buffer_id 0 (disconnected from fb).
 [gm] x 0, y 0.
 [gm] mode_valid 0.
 [gm] Mode : clock 0 H 0 0 0 0 0 V 0 0 0 0 0 VR 0 flags 0x0000 type 0x0000.
 [gm] gamma_size 256.
 [gm] 0 connectors.
 [gm] ======================
 [gm] ======================
 [gm] encoder_id 10.
 [gm] encoder_type DAC (1).
 [gm] crtc_id 0.
 [gm] possible_crtcs 3.
 [gm] possible_clones 0.
 [gm] ======================
 [gm] ======================
 [gm] encoder_id 11.
 [gm] encoder_type TMDS (2).
 [gm] crtc_id 0.
 [gm] possible_crtcs 3.
 [gm] possible_clones 0.
 [gm] ======================
 [gm] ======================
 [gm] encoder_id 13.
 [gm] encoder_type TMDS (2).
 [gm] crtc_id 0.
 [gm] possible_crtcs 3.
 [gm] possible_clones 0.
 [gm] ======================
 [gm] Connector Id 7.
 [gm] Mode 1024x768: clock 65000 H 1024 1048 1184 1344 0 V 768 771 777 806 0 VR 60 flags 0x000a type 0x0040.
 [gm] Mode 800x600: clock 40000 H 800 840 968 1056 0 V 600 601 605 628 0 VR 60 flags 0x0005 type 0x0040.
 [gm] Mode 800x600: clock 36000 H 800 824 896 1024 0 V 600 601 603 625 0 VR 56 flags 0x0005 type 0x0040.
 [gm] Mode 848x480: clock 33750 H 848 864 976 1088 0 V 480 486 494 517 0 VR 60 flags 0x0005 type 0x0040.
 [gm] Mode 640x480: clock 25175 H 640 656 752 800 0 V 480 489 492 525 0 VR 60 flags 0x000a type 0x0040.
 [gm] Make new mode 1920x1080@60Hz.
 [gm] Mode 1920x1080@60Hz NOT found in table. Generate timings.
 [gm] Mode 1920x1080: clock 172798 H 1920 2040 2248 2576 0 V 1080 1081 1084 1118 0 VR 60 flags 0x000a type 0x0028.
 [gm] Encoder Id 10.
 [gm] CRTC Id 5.
 [gm] fb_ptr 0xb72a1000
 [gm] stride 4096.
 [gm] size 4423680.
 [gm] handle 0x00000001.
 [gm] ======================
 [gm] fb_id 0.
 [gm] width 1920.
 [gm] height 1080.
 [gm] pitch 4096.
 [gm] bpp 16.
 [gm] depth 16.
 [gm] handle 1.
 [gm] ======================
 [KERNEL] [drm] nouveau 0000:03:00.0: No native mode, forcing panel scaling
 [gm] LINELENBYTES 4096, VBUF 0xb72a1000.
 [gm] It isn't WTware5 TFTP server...
 [gm] tftp: download and unpack file 5.0.1/packages/sound from 192.168.1.102.
 [gm] Run sound daemon.
 [pfac] Got command line /sbin/rdpsnd 1 0.
 [pfac] Ok, PID 527.
 [gm] Only one RDP session can use sound redirection.
 [gm] Turn it off in screen 1 connection 0.
 [gm] Only one RDP session can use sound redirection.
 [gm] Turn it off in screen 2 connection 0.
 [gm] Only one RDP session can use sound redirection.
 [gm] Turn it off in screen 3 connection 0.
 [gm] tftp: download and unpack file 5.0.1/packages/sc from 192.168.1.102.
 [rdpsnd] RDP Sound Redirector, WTware v.5.0.1.
 [gm] Run scard daemons.
 [gm] +--- Executing "/sbin/openct-control init"
 [gm] +- Errorlevel: 0, output:
 [pfac] Got command line /sbin/rdpdr[scard].
 [gm] +------------------------
 [pfac] Ok, PID 530.
 [gm] Loading ISO 9660 and UDF CDROM filesystem drivers.
 [gm] +--- Executing "/sbin/modprobe udf"
 [rdpdr-scard] RDP Smart Card Redirector, WTware v.5.0.1.
 [gm] +- Errorlevel: 0, output:
 [gm] +------------------------
 [gm] +--- Executing "/sbin/modprobe isofs"
 [gm] +- Errorlevel: 0, output:
 [gm] +------------------------
 [gm] Loading UTF8 charset.
 [gm] +--- Executing "/sbin/modprobe nls_cp437"
 [gm] +- Errorlevel: 0, output:
 [gm] +------------------------
 [gm] +--- Executing "/sbin/modprobe nls_utf8"
 [gm] +- Errorlevel: 0, output:
 [gm] +------------------------
 [gm] Loading VFAT filesystem driver.
 [gm] +--- Executing "/sbin/modprobe fat"
 [gm] +- Errorlevel: 0, output:
 [gm] +------------------------
 [gm] +--- Executing "/sbin/modprobe vfat"
 [gm] +- Errorlevel: 0, output:
 [gm] +------------------------
 [gm] +--- Executing "/sbin/modprobe ntfs"
 [gm] +- Errorlevel: 0, output:
 [KERNEL] NTFS driver 2.1.30 [Flags: R/O MODULE].
 [gm] +------------------------
 [gm] Loading usb storage driver.
 [gm] +--- Executing "/sbin/modprobe scsi_mod"
 [gm] +- Errorlevel: 0, output:
 [KERNEL] SCSI subsystem initialized
 [gm] +------------------------
 [gm] +--- Executing "/sbin/modprobe usb-storage"
 [KERNEL] Initializing USB Mass Storage driver...
 [KERNEL] usb-storage 2-3:1.0: usb_probe_interface
 [KERNEL] usb-storage 2-3:1.0: usb_probe_interface - got id
 [KERNEL] scsi0 : usb-storage 2-3:1.0
 [gm] +- Errorlevel: 0, output:
 [KERNEL] usbcore: registered new interface driver usb-storage
 [KERNEL] USB Mass Storage support registered.
 [gm] +------------------------
 [gm] +--- Executing "/sbin/modprobe sd_mod"
 [gm] +- Errorlevel: 0, output:
 [gm] +------------------------
 [gm] Loading ALSA sound card driver.
 [gm] +--- Executing "/sbin/modprobe snd-hda-intel"
 [KERNEL] HDA Intel 0000:00:08.0: power state changed by ACPI to D0
 [KERNEL] HDA Intel 0000:00:08.0: power state changed by ACPI to D0
 [KERNEL] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22
 [KERNEL] HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22
 [KERNEL] hda_intel: Disabling MSI
 [KERNEL] HDA Intel 0000:00:08.0: setting latency timer to 64
 [gm] +- Errorlevel: 0, output:
 [gm] +------------------------
 [gm] +--- Executing "/sbin/modprobe snd-usb-audio"
 [gm] +- Errorlevel: 0, output:
 [KERNEL] usbcore: registered new interface driver snd-usb-audio
 [gm] +------------------------
 [KERNEL] scsi 0:0:0:0: Direct-Access Generic STORAGE DEVICE 9732 PQ: 0 ANSI: 0
 [KERNEL] scsi 0:0:0:1: Direct-Access Generic STORAGE DEVICE 9732 PQ: 0 ANSI: 0
 [KERNEL] sd 0:0:0:0: [sda] Attached SCSI removable disk
 [hpsc] R/w FAT mount ("/dev/sda", "/mnt/usb-rdp/0",..) failed, errno 123.
 [hpsc] R/o NTFS mount ("/dev/sda", "/mnt/usb-rdp/0",..) failed, errno 123.
 [hpsc] R/o FAT mount ("/dev/sda", "/mnt/usb-rdp/0",..) failed, errno 123.
 [KERNEL] scsi 0:0:0:2: Direct-Access Generic STORAGE DEVICE 9732 PQ: 0 ANSI: 0
 [hpsc] Action change.
 [KERNEL] sd 0:0:0:1: [sdb] Attached SCSI removable disk
 [hpsc] R/w FAT mount ("/dev/sdb", "/mnt/usb-rdp/5",..) failed, errno 123.
 [hpsc] R/o NTFS mount ("/dev/sdb", "/mnt/usb-rdp/5",..) failed, errno 123.
 [KERNEL] scsi 0:0:0:3: Direct-Access Generic STORAGE DEVICE 9732 PQ: 0 ANSI: 0
 [hpsc] R/o FAT mount ("/dev/sdb", "/mnt/usb-rdp/5",..) failed, errno 123.
 [hpsc] Action change.
 [KERNEL] sd 0:0:0:2: [sdc] Attached SCSI removable disk
 [KERNEL] scsi 0:0:0:4: Direct-Access Generic STORAGE DEVICE 9732 PQ: 0 ANSI: 0
 [hpsc] R/w FAT mount ("/dev/sdc", "/mnt/usb-rdp/10",..) failed, errno 123.
 [hpsc] R/o NTFS mount ("/dev/sdc", "/mnt/usb-rdp/10",..) failed, errno 123.
 [hpsc] R/o FAT mount ("/dev/sdc", "/mnt/usb-rdp/10",..) failed, errno 123.
 [hpsc] Action change.
 [KERNEL] sd 0:0:0:3: [sdd] Attached SCSI removable disk
 [hpsc] R/w FAT mount ("/dev/sdd", "/mnt/usb-rdp/15",..) failed, errno 123.
 [hpsc] R/o NTFS mount ("/dev/sdd", "/mnt/usb-rdp/15",..) failed, errno 123.
 [hpsc] R/o FAT mount ("/dev/sdd", "/mnt/usb-rdp/15",..) failed, errno 123.
 [hpsc] Action change.
 [KERNEL] sd 0:0:0:4: [sde] Attached SCSI removable disk
 [hpsc] R/w FAT mount ("/dev/sde", "/mnt/usb-rdp/20",..) failed, errno 123.
 [hpsc] Action change.
 [hpsc] R/o NTFS mount ("/dev/sde", "/mnt/usb-rdp/20",..) failed, errno 123.
 [hpsc] R/o FAT mount ("/dev/sde", "/mnt/usb-rdp/20",..) failed, errno 123.
 [pfac] Got command line /sbin/resolver 3 dns [sergey.local].
 [pfac] Ok, PID 624.
 /--- FILE "/etc/resolv.conf" -----------------------
 | nameserver 192.168.1.100
 | domain local
 \----------------------------------------------------
 [resolver 3] Lookup for "sergey.local" failed, errors 0 -2.
 [pfac] Process pid 624 terminated, status 00000000.
 [gm] Failed to resolve sergey.local.
 [pfac] Got command line /sbin/resolver 3 dns [192.168.1.103].
 [pfac] Ok, PID 625.
 [pfac] Process pid 625 terminated, status 00000000.
 [gm] 192.168.1.103 => 192.168.1.103.
 [gm] Free ram before fork terminal client /sbin/rdpclient (session 1): 875188 Kb.
 [pfac] Got command line /sbin/rdpclient 1.
 [pfac] Ok, PID 626.
 [rdpclient 626] RDP Terminal Client, WTware v.5.0.1, pipe 1, pid 626.
 [rdpclient 626] Add RDPDR channel.
 [rdpclient 626] Add RDPSND channel.
 [rdpclient 626] Add CLIPRDR channel.
 [rdpclient 626] Add WTVC WTware control channel.
 [rdpclient 626] Make RDP session with 192.168.1.103:3389.
 [rdpclient 626] Username: "?????????????".
 [rdpclient 626] No password.
 [rdpclient 626] No domain.
 [rdpclient 626] No shell.
 [rdpclient 626] No directory.
 [rdpclient 626] Window: 1920x1080@16.
 [rdpclient 626] PFlags 0x0000006F.
 [rdpclient 626] Keyboard 00000409:00000000.
 [rdpclient 626] My hostname "wtw90FBA629C569".
 [rdpclient 626] TCP: connecting to 192.168.1.103:3389.
 [rdpclient 626] TCP: connection with 192.168.1.103:3389 established.
 [rdpclient 626] Turn keepalive on.
 [rdpclient 626] Free ram after buffers allocation: 871468 KB.
 [rdpclient 626] RDP4 encryption (NT4, XP, 2000 and 2003 in remote administration mode).
 [rdpclient 626] RC4 key 128 bit.
 [rdpclient 626] Receive Disconnect Provider Ultimatum.
 [gm] TSClient gracefully end.
 [rdpclient 626] Caught signal SIGTERM.
 [rdpsnd] Link lost.
 [pfac] Process pid 626 terminated, status 00000000.
 [pfac] Got command line /sbin/resolver 3 dns [192.168.1.103].
 [pfac] Ok, PID 627.
 [pfac] Process pid 627 terminated, status 00000000.
 [gm] 192.168.1.103 => 192.168.1.103.
 [gm] Free ram before fork terminal client /sbin/rdpclient (session 2): 874940 Kb.
 [pfac] Got command line /sbin/rdpclient 2.
 [pfac] Ok, PID 628.
 [rdpclient 628] RDP Terminal Client, WTware v.5.0.1, pipe 2, pid 628.
 [rdpclient 628] Add RDPDR channel.
 [rdpclient 628] Add RDPSND channel.
 [rdpclient 628] Add CLIPRDR channel.
 [rdpclient 628] Add WTVC WTware control channel.
 [rdpclient 628] Make RDP session with 192.168.1.103:3389.
 [rdpclient 628] Username: "?????????????".
 [rdpclient 628] No password.
 [rdpclient 628] No domain.
 [rdpclient 628] No shell.
 [rdpclient 628] No directory.
 [rdpclient 628] Window: 1920x1080@16.
 [rdpclient 628] PFlags 0x0000006F.
 [rdpclient 628] Keyboard 00000409:00000000.
 [rdpclient 628] My hostname "wtw90FBA629C569".
 [rdpclient 628] TCP: connecting to 192.168.1.103:3389.
 [rdpclient 628] TCP: connection with 192.168.1.103:3389 established.
 [rdpclient 628] Turn keepalive on.
 [rdpclient 628] Free ram after buffers allocation: 871592 KB.
 [rdpclient 628] RDP4 encryption (NT4, XP, 2000 and 2003 in remote administration mode).
 [rdpclient 628] RC4 key 128 bit.
 [rdpclient 628] SessionId 0x00000000: I-SERV\Администратор.
 [rdpclient 628] Sound redirection: 22050 frames per second.
 [rdpsnd] Force stereo sound.
 [rdpsnd] ALSA buffer size 32768 bytes.
 [rdpsnd] ALSA: "Capture Switch".
 [rdpsnd] ALSA: "Capture Volume".
 [rdpsnd] ALSA: "Front Playback Switch".
 [rdpsnd] ALSA: "Front Playback Volume".
 [rdpsnd] ALSA: "Headphone Playback Switch".
 [rdpsnd] ALSA: "Headphone Playback Volume".
 [pfac] Got command line /sbin/resolver 2 dns [192.168.1.45].
 [pfac] Ok, PID 629.
 [pfac] Process pid 629 terminated, status 00000000.
 [gm] 192.168.1.45 => 192.168.1.45.
 [gm] Free ram before fork terminal client /sbin/rdpclient (session 3): 871088 Kb.
 [pfac] Got command line /sbin/rdpclient 3.
 [pfac] Ok, PID 630.
 [rdpclient 630] RDP Terminal Client, WTware v.5.0.1, pipe 3, pid 630.
 [rdpclient 630] Add RDPDR channel.
 [rdpclient 628] rdpclient-rdpsnd-queue.cpp ( 286), rdpsndQueue_suspend: -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
 [rdpclient 628] rdpclient-rdpsnd-queue.cpp ( 287), rdpsndQueue_suspend: -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
 [rdpclient 628] rdpclient-rdpsnd-queue.cpp ( 288), rdpsndQueue_suspend: -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
Home   WTware diskless client.


zvuk est' s treskom. ns 44100 treska men'she