[wtc.exe] Терминал сейчас будет перегружен. RSH: got command restart from 192.168.1.11. Reboot. [wtc.exe] Соединение закрыто. [wtc.exe] Не удалось подключиться к 192.168.1.135:779. Connection from wtc.exe at 192.168.1.11. [initrd] tftp: download and unpack file 4.9.10\packages\x from 192.168.1.9. [initrd] tftp: download and unpack file 4.9.10\packages\xsis from 192.168.1.9. [initrd] tftp: download and unpack file 4.9.10\packages\graphic from 192.168.1.9. [gm] WTware session manager v.4.9.10. [gm] New mode: 1680x1050, 16 bit, 0 Hz, modeline "", DDC enabled, connector 0. [gm] Mouse PnP: IMPS2 or EXPPS2? [gm] Mouse PnP: EXPPS2. +--- FILE "/etc/XF86Config" ----------------------- | Section "Files" | FontPath "/X11R7/fonts" | EndSection | Section "ServerFlags" | Option "DontVTSwitch" | Option "DontZoom" | Option "DontZap" | Option "NoPM" | EndSection | Section "InputDevice" | Identifier "Keyboard1" | Driver "void" | Option "XkbDisable" | EndSection | Section "InputDevice" | Identifier "Mouse1" | Driver "void" | EndSection | Section "Device" | Identifier "Video" | Driver "sis" | Option "BenchmarkMemcpy" "off" | Option "UseSSE" "off" | Option "NoAccel" "on" | DacSpeed 150 | Option "MergedFB" "off" | Option "ShadowFB" "off" | Option "DRI" "off" | EndSection | Section "Monitor" | Identifier "Monitor" | HorizSync 20-200 | VertRefresh 50-200 | Option "PreferredMode" "1680x1050" | EndSection | Section "Screen" | Identifier "Screen" | Device "Video" | Monitor "Monitor" | DefaultDepth 16 | SubSection "Display" | Depth 16 | Modes "1680x1050" | Virtual 1680 1050 | EndSubSection | EndSection | Section "ServerLayout" | Identifier "Layout" | Screen "Screen" | InputDevice "Keyboard1" "CoreKeyboard" | InputDevice "Mouse1" "CorePointer" | EndSection +---------------------------------------------------- [pfac] Got command line /X11R7/bin/Xorg -br -bs -s 0 . [pfac] Ok, PID 409. [X.org log] (WW) Failed to open protocol names file /X11R7/lib/xorg/protocol.txt [X.org out] X.Org X Server 1.5.3 [X.org out] Release Date: 5 November 2008 [X.org log] X.Org X Server 1.5.3 [X.org log] Release Date: 5 November 2008 [X.org out] X Protocol Version 11, Revision 0 [X.org log] X Protocol Version 11, Revision 0 [X.org out] Build Operating System: Linux [X.org log] Build Operating System: Linux [X.org out] Current Operating System: Linux (none) 2.6.36 #1 PREEMPT Mon Aug 30 01:52:12 MDT 2010 i686 [X.org log] Current Operating System: Linux (none) 2.6.36 #1 PREEMPT Mon Aug 30 01:52:12 MDT 2010 i686 [X.org out] Build Date: 15 July 2010 07:36:13PM [X.org log] Build Date: 15 July 2010 07:36:13PM [X.org out] [X.org log] [X.org out] Before reporting problems, check http://www.wtware.com/ [X.org out] to make sure that you have the latest version. [X.org log] Before reporting problems, check http://www.wtware.com/ [X.org log] to make sure that you have the latest version. [X.org out] Markers: (--) probed, (**) from config file, (==) default setting, [X.org log] Markers: (--) probed, (**) from config file, (==) default setting, [X.org out] (++) from command line, (!!) notice, (II) informational, [X.org log] (++) from command line, (!!) notice, (II) informational, [X.org out] (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [X.org log] (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [X.org out] (==) Log file: "/X11R7/var/log/Xorg.0.log", Time: Thu Sep 16 19:39:31 2010 [X.org log] (==) Log file: "/X11R7/var/log/Xorg.0.log", Time: Thu Sep 16 19:39:31 2010 [X.org out] (==) Using config file: "/etc/XF86Config" [X.org log] (==) Using config file: "/etc/XF86Config" [X.org log] (==) ServerLayout "Layout" [X.org log] (**) |-->Screen "Screen" (0) [X.org log] (**) | |-->Monitor "Monitor" [X.org log] (**) | |-->Device "Video" [X.org log] (**) |-->Input Device "Keyboard1" [X.org log] (**) |-->Input Device "Mouse1" [X.org log] (**) Option "DontVTSwitch" [X.org log] (**) Option "DontZap" [X.org log] (**) Option "DontZoom" [X.org log] (**) Option "NoPM" [X.org log] (==) Automatically adding devices [X.org log] (==) Automatically enabling devices [X.org log] (WW) The directory "/X11R7/fonts" does not exist. [X.org log] Entry deleted from font path. [X.org log] (WW) FontPath is completely invalid. Using compiled-in default. [X.org log] (==) FontPath set to: [X.org log] built-ins [X.org log] (==) ModulePath set to "/X11R7/lib/xorg/modules" [X.org log] (II) Loader magic: 0x81bf500 [X.org log] (II) Module ABI versions: [X.org log] X.Org ANSI C Emulation: 0.4 [X.org log] X.Org Video Driver: 4.1 [X.org log] X.Org XInput driver : 2.1 [X.org log] X.Org Server Extension : 1.1 [X.org log] X.Org Font Renderer : 0.6 [X.org log] (II) Loader running on linux [X.org log] (--) PCI:*(0@1:0:0) unknown vendor (0x1039) unknown chipset (0x6351) rev 16, Mem @ 0xc0000000/0, 0xfeae0000/0, I/O @ 0x0000dc00/0 [X.org log] (II) System resource ranges: [X.org log] [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [X.org log] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [X.org log] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [X.org log] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [X.org log] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [X.org log] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [X.org log] (II) LoadModule: "extmod" [X.org log] (II) Loading /X11R7/lib/xorg/modules/extensions//libextmod.so [X.org log] (II) Module extmod: vendor="X.Org Foundation" [X.org log] compiled for 1.5.3, module version = 1.0.0 [X.org log] Module class: X.Org Server Extension [X.org log] ABI class: X.Org Server Extension, version 1.1 [X.org log] (II) Loading extension SHAPE [X.org log] (II) Loading extension MIT-SUNDRY-NONSTANDARD [X.org log] (II) Loading extension BIG-REQUESTS [X.org log] (II) Loading extension SYNC [X.org log] (II) Loading extension XC-MISC [X.org log] (II) Loading extension XFree86-DGA [X.org log] (II) Loading extension XVideo [X.org log] (II) Loading extension XVideo-MotionCompensation [X.org log] (II) LoadModule: "dbe" [X.org log] (WW) Warning, couldn't open module dbe [X.org log] (II) UnloadModule: "dbe" [X.org out] (EE) Failed to load module "dbe" (module does not exist, 0) [X.org log] (EE) Failed to load module "dbe" (module does not exist, 0) [X.org log] (II) LoadModule: "glx" [X.org log] (WW) Warning, couldn't open module glx [X.org log] (II) UnloadModule: "glx" [X.org out] (EE) Failed to load module "glx" (module does not exist, 0) [X.org log] (EE) Failed to load module "glx" (module does not exist, 0) [X.org log] (II) LoadModule: "freetype" [X.org log] (WW) Warning, couldn't open module freetype [X.org log] (II) UnloadModule: "freetype" [X.org out] (EE) Failed to load module "freetype" (module does not exist, 0) [X.org log] (EE) Failed to load module "freetype" (module does not exist, 0) [X.org log] (II) LoadModule: "dri" [X.org log] (WW) Warning, couldn't open module dri [X.org log] (II) UnloadModule: "dri" [X.org out] (EE) Failed to load module "dri" (module does not exist, 0) [X.org log] (EE) Failed to load module "dri" (module does not exist, 0) [X.org log] (II) LoadModule: "sis" [X.org log] (II) Loading /X11R7/lib/xorg/modules/drivers//sis_drv.so [X.org log] (II) Module sis: vendor="X.Org Foundation" [X.org log] compiled for 1.5.3, module version = 0.8.0 [X.org log] Module class: X.Org Video Driver [X.org log] ABI class: X.Org Video Driver, version 4.1 [X.org log] (II) LoadModule: "void" [X.org log] (II) Loading /X11R7/lib/xorg/modules/input//void_drv.so [X.org log] (II) Module void: vendor="X.Org Foundation" [X.org log] compiled for 1.5.3, module version = 1.3.0 [X.org log] Module class: X.Org XInput Driver [X.org log] ABI class: X.Org XInput driver, version 2.1 [X.org log] (II) SIS: driver for SiS chipsets: SIS5597/5598, SIS530/620, [X.org log] SIS6326/AGP/DVD, SIS300/305, SIS630/730, SIS540, SIS315, SIS315H, [X.org log] SIS315PRO/E, SIS550, SIS650/M650/651/740, SIS330(Xabre), [X.org log] SIS[M]661[F|M]X/[M]741[GX]/[M]760[GX]/[M]761[GX]/662, SIS340, [X.org log] [M]670/[M]770[GX], [M]671/[M]771[GX] [X.org log] (II) SIS: driver for XGI chipsets: Volari Z7 (XG20), [X.org log] Volari V3XT/V5/V8/Duo (XG40/XG42) [X.org log] (II) Primary Device is: PCI 01@00:00:0 [X.org log] (WW) Falling back to old probe method for sis [X.org out] (WW) SIS: No matching Device section for instance (BusID PCI:0@0:0:0) found [X.org log] (WW) SIS: No matching Device section for instance (BusID PCI:0@0:0:0) found [X.org out] (WW) SIS: No matching Device section for instance (BusID PCI:0@0:1:0) found [X.org log] (WW) SIS: No matching Device section for instance (BusID PCI:0@0:1:0) found [X.org out] (WW) SIS: No matching Device section for instance (BusID PCI:0@0:2:0) found [X.org log] (WW) SIS: No matching Device section for instance (BusID PCI:0@0:2:0) found [X.org out] (WW) SIS: No matching Device section for instance (BusID PCI:0@0:2:5) found [X.org log] (WW) SIS: No matching Device section for instance (BusID PCI:0@0:2:5) found [X.org out] (WW) SIS: No matching Device section for instance (BusID PCI:0@0:3:0) found [X.org log] (WW) SIS: No matching Device section for instance (BusID PCI:0@0:3:0) found [X.org out] (WW) SIS: No matching Device section for instance (BusID PCI:0@0:3:1) found [X.org log] (WW) SIS: No matching Device section for instance (BusID PCI:0@0:3:1) found [X.org out] (WW) SIS: No matching Device section for instance (BusID PCI:0@0:3:3) found [X.org log] (WW) SIS: No matching Device section for instance (BusID PCI:0@0:3:3) found [X.org out] (WW) SIS: No matching Device section for instance (BusID PCI:0@0:5:0) found [X.org log] (WW) SIS: No matching Device section for instance (BusID PCI:0@0:5:0) found [X.org out] (WW) SIS: No matching Device section for instance (BusID PCI:0@0:6:0) found [X.org log] (WW) SIS: No matching Device section for instance (BusID PCI:0@0:6:0) found [X.org out] (WW) SIS: No matching Device section for instance (BusID PCI:0@0:15:0) found [X.org log] (WW) SIS: No matching Device section for instance (BusID PCI:0@0:15:0) found [X.org out] (WW) SIS: No matching Device section for instance (BusID PCI:0@0:31:0) found [X.org log] (WW) SIS: No matching Device section for instance (BusID PCI:0@0:31:0) found [X.org log] (--) Assigning device section with no busID to primary device [X.org log] (--) Chipset [M]671/[M]771[GX] found [X.org log] (II) resource ranges after xf86ClaimFixedResources() call: [X.org log] [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [X.org log] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [X.org log] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [X.org log] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [X.org log] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [X.org log] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [X.org log] (II) resource ranges after probing: [X.org log] [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [X.org log] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [X.org log] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [X.org log] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [X.org log] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [X.org log] [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [X.org log] [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [X.org log] [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [X.org log] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [X.org log] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [X.org log] [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] [X.org log] (II) Setting vga for screen 0. [X.org log] (II) SIS(0): SiS driver (2006/10/17-1, compiled for X.org 1.5.3.0) [X.org log] (II) SIS(0): Copyright (C) 2001-2005 Thomas Winischhofer and others [X.org log] (II) SIS(0): *** See http://www.winischhofer.at/linuxsisvga.shtml [X.org log] (II) SIS(0): *** for documentation, updates and a Premium Version. [X.org log] (II) SIS(0): RandR rotation support not available in this version. [X.org log] (II) SIS(0): Dynamic modelist support not available in this version. [X.org log] (II) SIS(0): Screen growing support not available in this version. [X.org log] (II) SIS(0): Advanced Xv video blitter not available in this version. [X.org log] (II) SIS(0): Advanced MergedFB support not available in this version. [X.org log] (--) SIS(0): sisfb not found [X.org log] (--) SIS(0): Relocated I/O registers at 0xDC00 [X.org log] (II) Loading sub module "ramdac" [X.org log] (II) LoadModule: "ramdac" [X.org log] (II) Module "ramdac" already built-in [X.org log] (**) SIS(0): Depth 16, (--) framebuffer bpp 16 [X.org log] (==) SIS(0): RGB weight 565 [X.org log] (==) SIS(0): Default visual is TrueColor [X.org log] (--) SIS(0): Video BIOS version "S1028T1" found (new SiS data layout) [X.org log] (**) SIS(0): Option "BenchmarkMemcpy" "off" [X.org log] (**) SIS(0): Option "UseSSE" "off" [X.org log] (**) SIS(0): Option "NoAccel" "on" [X.org log] (**) SIS(0): Option "DRI" "off" [X.org log] (**) SIS(0): Option "ShadowFB" "off" [X.org log] (**) SIS(0): Option "MergedFB" "off" [X.org log] (**) SIS(0): 2D Acceleration disabled [X.org log] (==) SIS(0): Color HW cursor is enabled [X.org log] (II) SIS(0): Using VRAM command queue, size 512k [X.org log] (==) SIS(0): Hotkey display switching is enabled [X.org log] (==) SIS(0): SiSCtrl utility interface is disabled [X.org log] (II) SIS(0): For information on SiSCtrl, see [X.org log] http://www.winischhofer.at/linuxsispart1.shtml#sisctrl [X.org log] (**) SIS(0): Will not benchmark methods for system RAM to video RAM transfers [X.org log] (**) SIS(0): Will not use SSE CPU instructions [X.org log] (==) SIS(0): X server will not keep DPI constant for all screen sizes [X.org log] (**) SIS(0): DRI disabled [X.org log] (II) SIS(0): Checking OS for SSE support is not supported in this version of X.org [X.org log] (II) SIS(0): If your OS supports SSE, set the option "UseSSE" to "on". [X.org log] (--) SIS(0): 131072K shared video RAM (UMA) [X.org log] (--) SIS(0): DRAM type: DDR SDRAM [X.org log] (--) SIS(0): Memory clock: 503.174 MHz [X.org log] (--) SIS(0): DRAM bus width: 64 bit [X.org log] (--) SIS(0): Linear framebuffer at 0xC0000000 [X.org log] (--) SIS(0): MMIO registers at 0xFEAE0000 (size 64K) [X.org log] (--) SIS(0): VideoRAM: 131072 KB [X.org log] (II) SIS(0): Using 130496K of framebuffer memory at offset 0K [X.org log] (II) Loading sub module "ddc" [X.org log] (II) LoadModule: "ddc" [X.org log] (II) Module "ddc" already built-in [X.org log] (==) SIS(0): Using gamma correction (1.0, 1.0, 1.0) [X.org log] (II) SIS(0): Gamma correction is enabled [X.org log] (II) SIS(0): Separate Xv gamma correction is disabled [X.org log] (--) SIS(0): Memory bandwidth at 16 bpp is 2012.7 MHz [X.org log] (--) SIS(0): CRT1 DDC supported [X.org log] (--) SIS(0): CRT1 DDC level: 2 [X.org log] (--) SIS(0): CRT1 DDC monitor info: ******************************************* [X.org log] (II) SIS(0): Manufacturer: ACR Model: 27 Serial#: 22031665 [X.org log] (II) SIS(0): Year: 2010 Week: 15 [X.org log] (II) SIS(0): EDID Version: 1.3 [X.org log] (II) SIS(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V [X.org log] (II) SIS(0): Sync: Separate [X.org log] (II) SIS(0): Max Image Size [cm]: horiz.: 47 vert.: 30 [X.org log] (II) SIS(0): Gamma: 2.20 [X.org log] (II) SIS(0): DPMS capabilities: Off; RGB/Color Display [X.org log] (II) SIS(0): First detailed timing is preferred mode [X.org log] (II) SIS(0): redX: 0.644 redY: 0.332 greenX: 0.286 greenY: 0.601 [X.org log] (II) SIS(0): blueX: 0.152 blueY: 0.076 whiteX: 0.313 whiteY: 0.328 [X.org log] (II) SIS(0): Supported VESA Video Modes: [X.org log] (II) SIS(0): 720x400@70Hz [X.org log] (II) SIS(0): 640x480@60Hz [X.org log] (II) SIS(0): 640x480@67Hz [X.org log] (II) SIS(0): 640x480@72Hz [X.org log] (II) SIS(0): 640x480@75Hz [X.org log] (II) SIS(0): 800x600@56Hz [X.org log] (II) SIS(0): 800x600@60Hz [X.org log] (II) SIS(0): 800x600@72Hz [X.org log] (II) SIS(0): 800x600@75Hz [X.org log] (II) SIS(0): 832x624@75Hz [X.org log] (II) SIS(0): 1024x768@60Hz [X.org log] (II) SIS(0): 1024x768@70Hz [X.org log] (II) SIS(0): 1024x768@75Hz [X.org log] (II) SIS(0): 1280x1024@75Hz [X.org log] (II) SIS(0): 1152x870@75Hz [X.org log] (II) SIS(0): Manufacturer's mask: 0 [X.org log] (II) SIS(0): Supported Future Video Modes: [X.org log] (II) SIS(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [X.org log] (II) SIS(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [X.org log] (II) SIS(0): #2: hsize: 1440 vsize 900 refresh: 75 vid: 3989 [X.org log] (II) SIS(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149 [X.org log] (II) SIS(0): #4: hsize: 1600 vsize 1200 refresh: 60 vid: 16553 [X.org log] (II) SIS(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179 [X.org log] (II) SIS(0): #6: hsize: 1280 vsize 800 refresh: 60 vid: 129 [X.org log] (II) SIS(0): Supported additional Video Mode: [X.org log] (II) SIS(0): clock: 146.3 MHz Image Size: 473 x 296 mm [X.org log] (II) SIS(0): h_active: 1680 h_sync: 1960 h_sync_end 2136 h_blank_end 2240 h_border: 0 [X.org log] (II) SIS(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0 [X.org log] (II) SIS(0): Serial No: LC3081174275 [X.org log] (II) SIS(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 170 MHz [X.org log] (II) SIS(0): Monitor name: Acer V223W [X.org log] (II) SIS(0): EDID (in hex): [X.org log] (II) SIS(0): d8000000000000000100000000000000 [X.org log] (II) SIS(0): aa000000d14288bf17000000f84288bf [X.org log] (II) SIS(0): d3af82b7d14288bfffffffffb2561a08 [X.org log] (II) SIS(0): 384288bf00000000d8e11b08f84288bf [X.org log] (II) SIS(0): 41540e08d14288bfb2561a0808000000 [X.org log] (II) SIS(0): c00000005c4288bfa807000091000000 [X.org log] (II) SIS(0): 4c0c1b086c0c1b086c0d1b08300d1b08 [X.org log] (II) SIS(0): 6c0c1b08280e1b08300a0000242fc302 [X.org log] (--) SIS(0): According to DDC size, CRT1 aspect ratio is 1.57:1 (wide) [X.org log] (--) SIS(0): End of CRT1 DDC monitor info ************************************* [X.org log] (==) SIS(0): Min pixel clock is 10 MHz [X.org log] (**) SIS(0): Max pixel clock is 150 MHz [X.org log] (II) SIS(0): Replaced entire mode list with built-in modes [X.org log] (II) SIS(0): Using real widescreen modes for CRT1 VGA devices [X.org log] (II) SIS(0): [Use option "ForceCRT1VGAAspect" to overrule] [X.org log] (II) SIS(0): "Unknown reason" in the following list means that the mode [X.org log] (II) SIS(0): is not supported on the chipset/bridge/current output device. [X.org log] (II) SIS(0): Monitor: Using hsync range of 20.00-200.00 kHz [X.org log] (II) SIS(0): Monitor: Using vrefresh range of 50.00-200.00 Hz [X.org log] (II) SIS(0): Clock range: 10.00 to 150.00 MHz [X.org log] (II) SIS(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan) [X.org log] (II) SIS(0): Not using default mode "1600x1200" (height too large for virtual size) [X.org log] (II) SIS(0): Not using default mode "1600x1200" (height too large for virtual size) [X.org log] (II) SIS(0): Not using default mode "1600x1200" (height too large for virtual size) [X.org log] (II) SIS(0): Not using default mode "1600x1200" (height too large for virtual size) [X.org log] (II) SIS(0): Not using default mode "1600x1200" (height too large for virtual size) [X.org log] (II) SIS(0): Not using default mode "1600x1200" (height too large for virtual size) [X.org log] (II) SIS(0): Not using default mode "1600x1200" (height too large for virtual size) [X.org log] (II) SIS(0): Not using default mode "1920x1440" (width too large for virtual size) [X.org log] (II) SIS(0): Not using default mode "1920x1440" (width too large for virtual size) [X.org log] (II) SIS(0): Not using default mode "1920x1440" (width too large for virtual size) [X.org log] (II) SIS(0): Not using default mode "1920x1440" (width too large for virtual size) [X.org log] (II) SIS(0): Not using default mode "1920x1440" (width too large for virtual size) [X.org log] (II) SIS(0): Not using default mode "1920x1440" (width too large for virtual size) [X.org log] (II) SIS(0): Not using default mode "2048x1536" (width too large for virtual size) [X.org log] (II) SIS(0): Not using default mode "2048x1536" (width too large for virtual size) [X.org log] (II) SIS(0): Not using default mode "2048x1536" (width too large for virtual size) [X.org log] (II) SIS(0): Not using default mode "2048x1536" (width too large for virtual size) [X.org log] (II) SIS(0): Not using default mode "2048x1536" (width too large for virtual size) [X.org log] (II) SIS(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan) [X.org log] (II) SIS(0): Not using default mode "1920x1080" (width too large for virtual size) [X.org log] (**) SIS(0): Virtual size is 1680x1050 (pitch 1680) [X.org log] (**) SIS(0): *Default mode "1680x1050": 147.1 MHz, 65.2 kHz, 60.0 Hz [X.org log] (II) SIS(0): Modeline "1680x1050"x60.0 147.08 1680 1784 1968 2256 1050 1051 1054 1087 +hsync +vsync (65.2 kHz) [X.org log] (**) SIS(0): Default mode "1400x1050": 122.9 MHz, 65.4 kHz, 60.1 Hz [X.org log] (II) SIS(0): Modeline "1400x1050"x60.1 122.90 1400 1488 1640 1880 1050 1051 1054 1087 +hsync +vsync (65.4 kHz) [X.org log] (**) SIS(0): Default mode "1280x1024": 135.2 MHz, 80.1 kHz, 75.1 Hz [X.org log] (II) SIS(0): Modeline "1280x1024"x75.1 135.22 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.1 kHz) [X.org log] (**) SIS(0): Default mode "1280x1024": 107.9 MHz, 63.9 kHz, 59.9 Hz [X.org log] (II) SIS(0): Modeline "1280x1024"x59.9 107.86 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (63.9 kHz) [X.org log] (**) SIS(0): Default mode "1280x1024": 78.7 MHz, 46.4 kHz, 86.8 Hz (I) [X.org log] (II) SIS(0): Modeline "1280x1024"x86.8 78.75 1280 1400 1520 1696 1024 1026 1032 1069 interlace +hsync +vsync (46.4 kHz) [X.org log] (**) SIS(0): Default mode "1440x900": 96.2 MHz, 54.7 kHz, 60.0 Hz [X.org log] (II) SIS(0): Modeline "1440x900"x60.0 96.25 1440 1504 1536 1760 900 903 906 912 +hsync +vsync (54.7 kHz) [X.org log] (**) SIS(0): Default mode "1280x960": 148.5 MHz, 86.0 kHz, 85.0 Hz [X.org log] (II) SIS(0): Modeline "1280x960"x85.0 148.55 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync (86.0 kHz) [X.org log] (**) SIS(0): Default mode "1280x960": 107.9 MHz, 59.9 kHz, 59.9 Hz [X.org log] (II) SIS(0): Modeline "1280x960"x59.9 107.86 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (59.9 kHz) [X.org log] (**) SIS(0): Default mode "1280x854": 84.5 MHz, 50.8 kHz, 59.0 Hz [X.org log] (II) SIS(0): Modeline "1280x854"x59.0 84.48 1280 1296 1408 1664 854 855 858 861 +hsync +vsync (50.8 kHz) [X.org log] (**) SIS(0): Default mode "1360x768": 87.7 MHz, 48.5 kHz, 60.0 Hz [X.org log] (II) SIS(0): Modeline "1360x768"x60.0 87.70 1360 1416 1696 1808 768 770 782 808 +hsync +vsync (48.5 kHz) [X.org log] (**) SIS(0): Default mode "1280x800": 83.5 MHz, 49.7 kHz, 60.0 Hz [X.org log] (II) SIS(0): Modeline "1280x800"x60.0 83.52 1280 1344 1480 1680 800 801 804 828 +hsync +vsync (49.7 kHz) [X.org log] (**) SIS(0): Default mode "1152x864": 135.2 MHz, 76.1 kHz, 83.9 Hz [X.org log] (II) SIS(0): Modeline "1152x864"x83.9 135.22 1152 1464 1592 1776 864 865 876 908 +hsync +vsync (76.1 kHz) [X.org log] (**) SIS(0): Default mode "1152x864": 107.9 MHz, 67.4 kHz, 74.9 Hz [X.org log] (II) SIS(0): Modeline "1152x864"x74.9 107.86 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.4 kHz) [X.org log] (**) SIS(0): Default mode "1152x864": 89.9 MHz, 53.5 kHz, 60.0 Hz [X.org log] (II) SIS(0): Modeline "1152x864"x60.0 89.89 1152 1216 1472 1680 864 869 877 892 +hsync +vsync (53.5 kHz) [X.org log] (**) SIS(0): Default mode "1280x768": 80.9 MHz, 47.9 kHz, 59.8 Hz [X.org log] (II) SIS(0): Modeline "1280x768"x59.8 80.90 1280 1328 1440 1688 768 772 777 802 +hsync +vsync (47.9 kHz) [X.org log] (**) SIS(0): Default mode "1280x720": 74.3 MHz, 45.1 kHz, 60.1 Hz [X.org log] (II) SIS(0): Modeline "1280x720"x60.1 74.27 1280 1384 1424 1648 720 725 730 750 +hsync +vsync (45.1 kHz) [X.org log] (**) SIS(0): Default mode "1024x768": 139.3 MHz, 98.9 kHz, 120.2 Hz [X.org log] (II) SIS(0): Modeline "1024x768"x120.2 139.28 1024 1104 1216 1408 768 769 772 823 +hsync +vsync (98.9 kHz) [X.org log] (**) SIS(0): Default mode "1024x768": 113.3 MHz, 81.4 kHz, 100.0 Hz [X.org log] (II) SIS(0): Modeline "1024x768"x100.0 113.35 1024 1096 1208 1392 768 769 772 814 +hsync +vsync (81.4 kHz) [X.org log] (**) SIS(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz [X.org log] (II) SIS(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz) [X.org log] (**) SIS(0): Default mode "1024x768": 78.7 MHz, 60.0 kHz, 75.0 Hz [X.org log] (II) SIS(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz) [X.org log] (**) SIS(0): Default mode "1024x768": 75.2 MHz, 56.6 kHz, 70.2 Hz [X.org log] (II) SIS(0): Modeline "1024x768"x70.2 75.17 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.6 kHz) [X.org log] (**) SIS(0): Default mode "1024x768": 65.1 MHz, 48.5 kHz, 60.1 Hz [X.org log] (II) SIS(0): Modeline "1024x768"x60.1 65.15 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.5 kHz) [X.org log] (**) SIS(0): Default mode "1024x768": 44.9 MHz, 35.5 kHz, 86.8 Hz (I) [X.org log] (II) SIS(0): Modeline "1024x768"x86.8 44.86 1024 1032 1208 1264 768 768 776 817 interlace +hsync +vsync (35.5 kHz) [X.org log] (**) SIS(0): Default mode "1024x576": 47.2 MHz, 35.8 kHz, 60.1 Hz [X.org log] (II) SIS(0): Modeline "1024x576"x60.1 47.25 1024 1040 1184 1320 576 578 582 596 +hsync +vsync (35.8 kHz) [X.org log] (**) SIS(0): Default mode "960x600": 41.5 MHz, 37.1 kHz, 60.0 Hz [X.org log] (II) SIS(0): Modeline "960x600"x60.0 41.50 960 1008 1088 1120 600 603 609 618 +hsync +vsync (37.1 kHz) [X.org log] (**) SIS(0): Default mode "960x540": 37.3 MHz, 33.8 kHz, 60.0 Hz [X.org log] (II) SIS(0): Modeline "960x540"x60.0 37.29 960 976 1008 1104 540 543 549 563 +hsync +vsync (33.8 kHz) [X.org log] (**) SIS(0): Default mode "800x600": 116.5 MHz, 105.5 kHz, 160.1 Hz [X.org log] (II) SIS(0): Modeline "800x600"x160.1 116.45 800 864 952 1104 600 601 604 659 +hsync +vsync (105.5 kHz) [X.org log] (**) SIS(0): Default mode "800x600": 84.0 MHz, 77.2 kHz, 120.1 Hz [X.org log] (II) SIS(0): Modeline "800x600"x120.1 84.00 800 856 944 1088 600 601 604 643 +hsync +vsync (77.2 kHz) [X.org log] (**) SIS(0): Default mode "800x600": 68.2 MHz, 63.6 kHz, 100.0 Hz [X.org log] (II) SIS(0): Modeline "800x600"x100.0 68.18 800 848 936 1072 600 601 604 636 +hsync +vsync (63.6 kHz) [X.org log] (**) SIS(0): Default mode "800x600": 56.2 MHz, 53.7 kHz, 85.1 Hz [X.org log] (II) SIS(0): Modeline "800x600"x85.1 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz) [X.org log] (**) SIS(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz [X.org log] (II) SIS(0): Modeline "800x600"x75.0 49.52 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz) [X.org log] (**) SIS(0): Default mode "800x600": 50.1 MHz, 48.2 kHz, 72.4 Hz [X.org log] (II) SIS(0): Modeline "800x600"x72.4 50.11 800 856 976 1040 600 637 643 666 +hsync +vsync (48.2 kHz) [X.org log] (**) SIS(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz [X.org log] (II) SIS(0): Modeline "800x600"x60.3 39.97 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [X.org log] (**) SIS(0): Default mode "800x600": 36.1 MHz, 35.2 kHz, 56.3 Hz [X.org log] (II) SIS(0): Modeline "800x600"x56.3 36.06 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [X.org log] (**) SIS(0): Default mode "768x576": 35.0 MHz, 35.9 kHz, 60.1 Hz [X.org log] (II) SIS(0): Modeline "768x576"x60.1 35.00 768 792 872 976 576 578 581 597 +hsync +vsync (35.9 kHz) [X.org log] (**) SIS(0): Default mode "720x576": 32.7 MHz, 35.9 kHz, 60.1 Hz [X.org log] (II) SIS(0): Modeline "720x576"x60.1 32.73 720 744 816 912 576 578 581 597 +hsync +vsync (35.9 kHz) [X.org log] (**) SIS(0): Default mode "856x480": 33.9 MHz, 31.7 kHz, 59.8 Hz [X.org log] (II) SIS(0): Modeline "856x480"x59.8 33.94 856 872 1000 1072 480 492 495 529 -hsync -vsync (31.7 kHz) [X.org log] (**) SIS(0): Default mode "856x480": 33.9 MHz, 30.5 kHz, 76.5 Hz (I) [X.org log] (II) SIS(0): Modeline "856x480"x76.5 33.94 856 904 1048 1112 480 672 680 797 interlace +hsync +vsync (30.5 kHz) [X.org log] (**) SIS(0): Default mode "848x480": 33.7 MHz, 31.0 kHz, 60.0 Hz [X.org log] (II) SIS(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 -hsync -vsync (31.0 kHz) [X.org log] (**) SIS(0): Default mode "848x480": 33.9 MHz, 30.5 kHz, 76.5 Hz (I) [X.org log] (II) SIS(0): Modeline "848x480"x76.5 33.94 848 904 1048 1112 480 672 680 797 interlace +hsync +vsync (30.5 kHz) [X.org log] (**) SIS(0): Default mode "800x480": 33.4 MHz, 31.6 kHz, 60.3 Hz [X.org log] (II) SIS(0): Modeline "800x480"x60.3 33.41 800 848 976 1056 480 490 492 525 +hsync +vsync (31.6 kHz) [X.org log] (**) SIS(0): Default mode "720x480": 28.3 MHz, 31.6 kHz, 61.0 Hz [X.org log] (II) SIS(0): Modeline "720x480"x61.0 28.28 720 728 840 896 480 490 492 517 -hsync -vsync (31.6 kHz) [X.org log] (**) SIS(0): Default mode "640x480": 86.6 MHz, 102.1 kHz, 200.7 Hz [X.org log] (II) SIS(0): Modeline "640x480"x200.7 86.62 640 672 736 848 480 487 491 509 -hsync -vsync (102.1 kHz) [X.org log] (**) SIS(0): Default mode "640x480": 72.9 MHz, 84.4 kHz, 160.1 Hz [X.org log] (II) SIS(0): Modeline "640x480"x160.1 72.89 640 680 752 864 480 481 484 527 -hsync -vsync (84.4 kHz) [X.org log] (**) SIS(0): Default mode "640x480": 52.4 MHz, 61.7 kHz, 119.9 Hz [X.org log] (II) SIS(0): Modeline "640x480"x119.9 52.35 640 680 744 848 480 481 484 515 -hsync -vsync (61.7 kHz) [X.org log] (**) SIS(0): Default mode "640x480": 43.3 MHz, 51.1 kHz, 100.3 Hz [X.org log] (II) SIS(0): Modeline "640x480"x100.3 43.29 640 680 744 848 480 481 484 509 -hsync -vsync (51.1 kHz) [X.org log] (**) SIS(0): Default mode "640x480": 36.1 MHz, 43.3 kHz, 85.1 Hz [X.org log] (II) SIS(0): Modeline "640x480"x85.1 36.06 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz) [X.org log] (**) SIS(0): Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz [X.org log] (II) SIS(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz) [X.org log] (**) SIS(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz [X.org log] (II) SIS(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz) [X.org log] (**) SIS(0): Default mode "640x480": 25.1 MHz, 31.3 kHz, 59.7 Hz [X.org log] (II) SIS(0): Modeline "640x480"x59.7 25.06 640 656 752 800 480 490 492 525 -hsync -vsync (31.3 kHz) [X.org log] (**) SIS(0): Default mode "640x400": 25.1 MHz, 31.6 kHz, 71.6 Hz [X.org log] (II) SIS(0): Modeline "640x400"x71.6 25.06 640 656 752 792 400 413 415 442 -hsync +vsync (31.6 kHz) [X.org log] (**) SIS(0): Default mode "512x384": 32.6 MHz, 48.5 kHz, 60.1 Hz (D) [X.org log] (II) SIS(0): Modeline "512x384"x60.1 32.57 512 528 592 672 384 385 388 403 doublescan -hsync -vsync (48.5 kHz) [X.org log] (**) SIS(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D) [X.org log] (II) SIS(0): Modeline "400x300"x60.3 19.98 400 416 480 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz) [X.org log] (**) SIS(0): Default mode "320x240": 12.5 MHz, 31.3 kHz, 60.7 Hz (D) [X.org log] (II) SIS(0): Modeline "320x240"x60.7 12.53 320 328 376 400 240 245 246 258 doublescan -hsync -vsync (31.3 kHz) [X.org log] (**) SIS(0): Default mode "320x200": 12.5 MHz, 31.3 kHz, 70.9 Hz (D) [X.org log] (II) SIS(0): Modeline "320x200"x70.9 12.53 320 328 376 400 200 206 207 221 doublescan -hsync +vsync (31.3 kHz) [X.org log] (--) SIS(0): Display dimensions: (470, 300) mm [X.org log] (--) SIS(0): DPI set to (90, 88) [X.org log] (II) Loading sub module "fb" [X.org log] (II) LoadModule: "fb" [X.org log] (II) Loading /X11R7/lib/xorg/modules//libfb.so [X.org log] (II) Module fb: vendor="X.Org Foundation" [X.org log] compiled for 1.5.3, module version = 1.0.0 [X.org log] ABI class: X.Org ANSI C Emulation, version 0.4 [X.org log] (II) do I need RAC? No, I don't. [X.org log] (II) resource ranges after preInit: [X.org log] [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [X.org log] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [X.org log] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [X.org log] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [X.org log] [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU) [X.org log] [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU) [X.org log] [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU) [X.org log] [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [X.org log] [8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] [X.org log] [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [X.org log] [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) [X.org log] (II) Loading sub module "vbe" [X.org log] (II) LoadModule: "vbe" [X.org log] (II) Loading /X11R7/lib/xorg/modules//libvbe.so [X.org log] (II) Module vbe: vendor="X.Org Foundation" [X.org log] compiled for 1.5.3, module version = 1.1.0 [X.org log] ABI class: X.Org Video Driver, version 4.1 [X.org log] (II) Loading sub module "int10" [X.org log] (II) LoadModule: "int10" [X.org log] (II) Loading /X11R7/lib/xorg/modules//libint10.so [X.org log] (II) Module int10: vendor="X.Org Foundation" [X.org log] compiled for 1.5.3, module version = 1.0.0 [X.org log] ABI class: X.Org Video Driver, version 4.1 [X.org log] (II) SIS(0): initializing int10 [X.org log] (II) SIS(0): Primary V_BIOS segment is: 0xc000 [X.org log] (II) SIS(0): VESA BIOS detected [X.org log] (II) SIS(0): VESA VBE Version 3.0 [X.org log] (II) SIS(0): VESA VBE Total Mem: 131072 kB [X.org log] (II) SIS(0): VESA VBE OEM: SiS [X.org log] (II) SIS(0): VESA VBE OEM Software Rev: 1.0 [X.org log] (II) SIS(0): VESA VBE OEM Vendor: Silicon Integrated Systems Corp. [X.org log] (II) SIS(0): VESA VBE OEM Product: 6330 [X.org log] (II) SIS(0): VESA VBE OEM Product Rev: S1028T1 [X.org log] (II) SIS(0): Setting standard mode 0x18 [X.org log] (II) SIS(0): Framebuffer from (0,0) to (1679,32766) [X.org log] (++) SIS(0): Backing store disabled [X.org log] (==) SIS(0): Silken mouse enabled [X.org log] (--) SIS(0): Hardware supports one video overlay [X.org log] (II) SIS(0): Using SiS300/315/330/340/350 series HW Xv by default on CRT1 [X.org log] (WW) SIS(0): Option "PreferredMode" is not used [X.org log] (II) SIS(0): Initialized SISCTRL extension version 0.1 [X.org log] (II) SIS(0): Registered screen 0 with SISCTRL extension version 0.1 [X.org log] (==) RandR enabled [X.org log] (II) Initializing built-in extension MIT-SHM [X.org log] (II) Initializing built-in extension XInputExtension [X.org log] (II) Initializing built-in extension XTEST [X.org log] (II) Initializing built-in extension XFIXES [X.org log] (II) Initializing built-in extension RENDER [X.org log] (II) Initializing built-in extension RANDR [X.org log] (II) Initializing built-in extension DAMAGE [X.org log] (**) Option "CoreKeyboard" [X.org log] (**) Keyboard1: always reports core events [X.org log] (**) Option "CorePointer" [X.org log] (**) Mouse1: always reports core events [X.org log] (II) evaluating device (Keyboard1) [X.org log] (II) XINPUT: Adding extended input device "Keyboard1" (type: Void) [X.org log] (II) evaluating device (Mouse1) [X.org log] (II) XINPUT: Adding extended input device "Mouse1" (type: Void) [gm] Allocate 3528000 bytes of shared memory for X imgbuf. [gm] New shared memory block 1680x1050@16bit: id 0x00008001, address 0xb745e000. [X.org log] (II) libc: 15522 usec. [X.org log] (II) built-in-1: 14943 usec. [X.org log] (II) built-in-2: 82546 usec. [X.org log] (II) MMX: 14901 usec. [X.org log] (II) SSE: 14654 usec. [X.org log] (II) SSE is fastest. [gm] Release shared memory block: id 0x00008001, address 0xb745e000. [gm] Allocate 8192 bytes of shared memory for X imgbuf. [gm] New shared memory block 64x64@16bit: id 0x00010002, address 0xb77ad000. [gm] Allocate 40960 bytes of shared memory for X imgbuf. [gm] New shared memory block 320x64@16bit: id 0x00018001, address 0xb77a3000. [gm] Allocate 3528000 bytes of shared memory for X imgbuf. [gm] New shared memory block 1680x1050@16bit: id 0x00028004, address 0xb7445000. [gm] Video test result: 6.08.