﻿WTware v.5.2.41

WTware v.5.2.41 supervisor.
WTC listener is active.
WTC broadcast listener is active.
HTTPd listener is active.
[KERNEL] [ 0.000000] Linux version 3.14.51 (root@c12) (gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu13) ) #1 PREEMPT Sat Aug 29 02:08:06 SAMT 2015
[KERNEL] [ 0.000000] KERNEL supported cpus:
[KERNEL] [ 0.000000] Intel GenuineIntel
[KERNEL] [ 0.000000] AMD AuthenticAMD
[KERNEL] [ 0.000000] NSC Geode by NSC
[KERNEL] [ 0.000000] Cyrix CyrixInstead
[KERNEL] [ 0.000000] Centaur CentaurHauls
[KERNEL] [ 0.000000] e820: BIOS-provided physical RAM map:
[KERNEL] [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[KERNEL] [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[KERNEL] [ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[KERNEL] [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007dd7ffff] usable
[KERNEL] [ 0.000000] BIOS-e820: [mem 0x000000007dd80000-0x000000007dd8dfff] ACPI data
[KERNEL] [ 0.000000] BIOS-e820: [mem 0x000000007dd8e000-0x000000007ddcffff] ACPI NVS
[KERNEL] [ 0.000000] BIOS-e820: [mem 0x000000007ddd0000-0x000000007ddfffff] reserved
[KERNEL] [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[KERNEL] [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[KERNEL] [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[KERNEL] [ 0.000000] SMBIOS 2.5 present.
[KERNEL] [ 0.000000] DMI: System manufacturer System Product Name/P5QPL-AM, BIOS 0408 03/16/2010
[KERNEL] [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[KERNEL] [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[KERNEL] [ 0.000000] e820: last_pfn = 0x7dd80 max_arch_pfn = 0x100000
[KERNEL] [ 0.000000] MTRR default type: uncachable
[KERNEL] [ 0.000000] MTRR fixed ranges enabled:
[KERNEL] [ 0.000000] 00000-9FFFF write-back
[KERNEL] [ 0.000000] A0000-BFFFF uncachable
[KERNEL] [ 0.000000] C0000-CFFFF write-protect
[KERNEL] [ 0.000000] D0000-DFFFF uncachable
[KERNEL] [ 0.000000] E0000-EFFFF write-through
[KERNEL] [ 0.000000] F0000-FFFFF write-protect
[KERNEL] [ 0.000000] MTRR variable ranges enabled:
[KERNEL] [ 0.000000] 0 base 000000000 mask F80000000 write-back
[KERNEL] [ 0.000000] 1 base 07DE00000 mask FFFE00000 uncachable
[KERNEL] [ 0.000000] 2 base 07E000000 mask FFE000000 uncachable
[KERNEL] [ 0.000000] 3 disabled
[KERNEL] [ 0.000000] 4 disabled
[KERNEL] [ 0.000000] 5 disabled
[KERNEL] [ 0.000000] 6 disabled
[KERNEL] [ 0.000000] 7 disabled
[KERNEL] [ 0.000000] Warning only 895MB will be used.
[KERNEL] [ 0.000000] Use a HIGHMEM enabled kernel.
[KERNEL] [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
[KERNEL] [ 0.000000] initial memory mapped: [mem 0x00000000-0x007fffff]
[KERNEL] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[KERNEL] [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[KERNEL] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[KERNEL] [ 0.000000] init_memory_mapping: [mem 0x37800000-0x37bfffff]
[KERNEL] [ 0.000000] [mem 0x37800000-0x37bfffff] page 2M
[KERNEL] [ 0.000000] init_memory_mapping: [mem 0x30000000-0x377fffff]
[KERNEL] [ 0.000000] [mem 0x30000000-0x377fffff] page 2M
[KERNEL] [ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
[KERNEL] [ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[KERNEL] [ 0.000000] [mem 0x00400000-0x2fffffff] page 2M
[KERNEL] [ 0.000000] init_memory_mapping: [mem 0x37c00000-0x37f9ffff]
[KERNEL] [ 0.000000] [mem 0x37c00000-0x37f9ffff] page 4k
[KERNEL] [ 0.000000] BRK [0x005ae000, 0x005aefff] PGTABLE
[KERNEL] [ 0.000000] early_memtest: # of tests: 1
[KERNEL] [ 0.000000] 0000010000 - 000009b000 pattern 0000000000000000
[KERNEL] [ 0.000000] 00005b4000 - 0037fa0000 pattern 0000000000000000
[KERNEL] [ 0.000000] RAMDISK: [mem 0x7da44000-0x7dd5efff]
[KERNEL] [ 0.000000] Allocated new RAMDISK: [mem 0x37c85000-0x37f9fb77]
[KERNEL] [ 0.000000] Move RAMDISK from [mem 0x7da44000-0x7dd5eb77] to [mem 0x37c85000-0x37f9fb77]
[KERNEL] [ 0.000000] ACPI: RSDP 0x00000000000FB800 000024 (v02 ACPIAM)
[KERNEL] [ 0.000000] ACPI: XSDT 0x000000007DD80100 000054 (v01 A_M_I_ OEMXSDT 03001016 MSFT 00000097)
[KERNEL] [ 0.000000] ACPI: FACP 0x000000007DD80290 0000F4 (v03 A_M_I_ OEMFACP 03001016 MSFT 00000097)
[KERNEL] [ 0.000000] ACPI: DSDT 0x000000007DD80440 007B08 (v01 A1282 A1282000 00000000 INTL 20060113)
[KERNEL] [ 0.000000] ACPI: FACS 0x000000007DD8E000 000040
[KERNEL] [ 0.000000] ACPI: APIC 0x000000007DD80390 00006C (v01 A_M_I_ OEMAPIC 03001016 MSFT 00000097)
[KERNEL] [ 0.000000] ACPI: MCFG 0x000000007DD80400 00003C (v01 A_M_I_ OEMMCFG 03001016 MSFT 00000097)
[KERNEL] [ 0.000000] ACPI: OEMB 0x000000007DD8E040 000089 (v01 A_M_I_ AMI_OEM 03001016 MSFT 00000097)
[KERNEL] [ 0.000000] ACPI: HPET 0x000000007DD87F50 000038 (v01 A_M_I_ OEMHPET 03001016 MSFT 00000097)
[KERNEL] [ 0.000000] ACPI: GSCI 0x000000007DD8E0D0 002024 (v01 A_M_I_ GMCHSCI 03001016 MSFT 00000097)
[KERNEL] [ 0.000000] ACPI: Local APIC address 0xfee00000
[KERNEL] [ 0.000000] 895MB LOWMEM available.
[KERNEL] [ 0.000000] mapped low ram: 0 - 37fa0000
[KERNEL] [ 0.000000] low ram: 0 - 37fa0000
[KERNEL] [ 0.000000] Zone ranges:
[KERNEL] [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[KERNEL] [ 0.000000] Normal [mem 0x01000000-0x37f9ffff]
[KERNEL] [ 0.000000] Movable zone start for each node
[KERNEL] [ 0.000000] Early memory node ranges
[KERNEL] [ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[KERNEL] [ 0.000000] node 0: [mem 0x00100000-0x7dd7ffff]
[KERNEL] [ 0.000000] On node 0 totalpages: 229182
[KERNEL] [ 0.000000] free_area_init_node: node 0, pgdat c0519600, node_mem_map f7585020
[KERNEL] [ 0.000000] DMA zone: 32 pages used for memmap
[KERNEL] [ 0.000000] DMA zone: 0 pages reserved
[KERNEL] [ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[KERNEL] [ 0.000000] Normal zone: 1760 pages used for memmap
[KERNEL] [ 0.000000] Normal zone: 225184 pages, LIFO batch:31
[KERNEL] [ 0.000000] Using APIC driver default
[KERNEL] [ 0.000000] ACPI: PM-Timer IO Port: 0x808
[KERNEL] [ 0.000000] ACPI: Local APIC address 0xfee00000
[KERNEL] [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[KERNEL] [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[KERNEL] [ 0.000000] ACPI: NR_CPUS/possible_cpus limit of 1 reached. Processor 1/0x1 ignored.
[KERNEL] [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[KERNEL] [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[KERNEL] [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[KERNEL] [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[KERNEL] [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[KERNEL] [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[KERNEL] [ 0.000000] ACPI: IRQ0 used by override.
[KERNEL] [ 0.000000] ACPI: IRQ2 used by override.
[KERNEL] [ 0.000000] ACPI: IRQ9 used by override.
[KERNEL] [ 0.000000] Using ACPI (MADT) for SMP configuration information
[KERNEL] [ 0.000000] nr_irqs_gsi: 40
[KERNEL] [ 0.000000] e820: [mem 0x80000000-0xfedfffff] available for PCI devices
[KERNEL] [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[KERNEL] [ 0.000000] pcpu-alloc: [0] 0 
[KERNEL] [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227390
[KERNEL] [ 0.000000] Kernel command line: root=/dev/ram0 memtest=1 quiet initrd=packages/initrd BOOT_IMAGE=packages/kernel 
[KERNEL] [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[KERNEL] [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[KERNEL] [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[KERNEL] [ 0.000000] Initializing CPU#0
[KERNEL] [ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
[KERNEL] [ 0.000000] allocated 1834232 bytes of page_cgroup
[KERNEL] [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[KERNEL] [ 0.000000] Memory: 898864K/916728K available (3171K kernel code, 207K rwdata, 828K rodata, 316K init, 248K bss, 17864K reserved)
[KERNEL] [ 0.000000] virtual kernel memory layout:
[KERNEL] [ 0.000000] fixmap : 0xfffa2000 - 0xfffff000 ( 372 kB)
[KERNEL] [ 0.000000] vmalloc : 0xf87a0000 - 0xfffa0000 ( 120 MB)
[KERNEL] [ 0.000000] lowmem : 0xc0000000 - 0xf7fa0000 ( 895 MB)
[KERNEL] [ 0.000000] .init : 0xc051e000 - 0xc056d000 ( 316 kB)
[KERNEL] [ 0.000000] .data : 0xc0419250 - 0xc051dd00 (1042 kB)
[KERNEL] [ 0.000000] .text : 0xc0100000 - 0xc0419250 (3172 kB)
[KERNEL] [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[KERNEL] [ 0.000000] Preemptible hierarchical RCU implementation.
[KERNEL] [ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[KERNEL] [ 0.000000] CPU 0 irqstacks, hard=f6c08000 soft=f6c0a000
[KERNEL] [ 0.000000] Console: colour VGA+ 80x25
[KERNEL] [ 0.000000] console [tty0] enabled
[KERNEL] [ 0.000000] tsc: Fast TSC calibration using PIT
[KERNEL] [ 0.000000] tsc: Detected 2699.957 MHz processor
[KERNEL] [ 0.001006] Calibrating delay loop (skipped), value calculated using timer frequency.. 5399.91 BogoMIPS (lpj=2699957)
[KERNEL] [ 0.001009] pid_max: default: 32768 minimum: 301
[KERNEL] [ 0.001017] ACPI: Core revision 20131218
[KERNEL] [ 0.003921] ACPI: All ACPI Tables successfully acquired
[KERNEL] [ 0.003937] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[KERNEL] [ 0.003939] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[KERNEL] [ 0.004083] Initializing cgroup subsys memory
[KERNEL] [ 0.004106] process: using mwait in idle threads
[KERNEL] [ 0.004117] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[KERNEL] [ 0.004117] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[KERNEL] [ 0.004117] tlb_flushall_shift: -1
[KERNEL] [ 0.004119] CPU: Intel Pentium(R) Dual-Core CPU E5400 @ 2.70GHz (fam: 06, model: 17, stepping: 0a)
[KERNEL] [ 0.005043] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[KERNEL] [ 0.005055] ... version: 2
[KERNEL] [ 0.005056] ... bit width: 40
[KERNEL] [ 0.005057] ... generic registers: 2
[KERNEL] [ 0.005058] ... value mask: 000000ffffffffff
[KERNEL] [ 0.005059] ... max period: 000000007fffffff
[KERNEL] [ 0.005060] ... fixed-purpose events: 3
[KERNEL] [ 0.005061] ... event mask: 0000000700000003
[KERNEL] [ 0.005156] Enabling APIC mode: Flat. Using 1 I/O APICs
[KERNEL] [ 0.006192] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[KERNEL] [ 0.017000] devtmpfs: initialized
[KERNEL] [ 0.017000] PM: Registering ACPI NVS region [mem 0x7dd8e000-0x7ddcffff] (270336 bytes)
[KERNEL] [ 0.017000] NET: Registered protocol family 16
[KERNEL] [ 0.017000] cpuidle: using governor ladder
[KERNEL] [ 0.017000] cpuidle: using governor menu
[KERNEL] [ 0.017000] ACPI: bus type PCI registered
[KERNEL] [ 0.017000] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[KERNEL] [ 0.017000] PCI: not using MMCONFIG
[KERNEL] [ 0.017000] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
[KERNEL] [ 0.017000] PCI: Using configuration type 1 for base access
[KERNEL] [ 0.018419] bio: create slab at 0
[KERNEL] [ 0.018475] ACPI: Added _OSI(Module Device)
[KERNEL] [ 0.018476] ACPI: Added _OSI(Processor Device)
[KERNEL] [ 0.018477] ACPI: Added _OSI(3.0 _SCP Extensions)
[KERNEL] [ 0.018479] ACPI: Added _OSI(Processor Aggregator Device)
[KERNEL] [ 0.019728] ACPI: Executed 1 blocks of module-level executable AML code
[KERNEL] [ 0.022152] ACPI: Interpreter enabled
[KERNEL] [ 0.022170] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131218/hwxface-580)
[KERNEL] [ 0.022179] ACPI: (supports S0 S1 S3 S5)
[KERNEL] [ 0.022180] ACPI: Using IOAPIC for interrupt routing
[KERNEL] [ 0.022198] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[KERNEL] [ 0.023035] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in ACPI motherboard resources
[KERNEL] [ 0.023037] PCI: Using MMCONFIG for extended config space
[KERNEL] [ 0.023062] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[KERNEL] [ 0.029238] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[KERNEL] [ 0.029243] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments]
[KERNEL] [ 0.029248] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[KERNEL] [ 0.029364] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[KERNEL] [ 0.029395] PCI host bridge to bus 0000:00
[KERNEL] [ 0.029397] pci_bus 0000:00: root bus resource [bus 00-ff]
[KERNEL] [ 0.029399] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[KERNEL] [ 0.029401] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[KERNEL] [ 0.029403] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[KERNEL] [ 0.029405] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[KERNEL] [ 0.029406] pci_bus 0000:00: root bus resource [mem 0x7de00000-0xefffffff]
[KERNEL] [ 0.029408] pci_bus 0000:00: root bus resource [mem 0xf4000000-0xffffffff]
[KERNEL] [ 0.029417] pci 0000:00:00.0: [8086:2e30] type 00 class 0x060000
[KERNEL] [ 0.029502] pci 0000:00:02.0: [8086:2e32] type 00 class 0x030000
[KERNEL] [ 0.029513] pci 0000:00:02.0: reg 0x10: [mem 0xfe400000-0xfe7fffff 64bit]
[KERNEL] [ 0.029519] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[KERNEL] [ 0.029523] pci 0000:00:02.0: reg 0x20: [io 0xdc00-0xdc07]
[KERNEL] [ 0.029622] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[KERNEL] [ 0.029635] pci 0000:00:1b.0: reg 0x10: [mem 0xfeaf8000-0xfeafbfff 64bit]
[KERNEL] [ 0.029686] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[KERNEL] [ 0.029759] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[KERNEL] [ 0.029805] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[KERNEL] [ 0.029842] pci 0000:00:1c.0: System wakeup disabled by ACPI
[KERNEL] [ 0.029885] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[KERNEL] [ 0.029936] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[KERNEL] [ 0.029972] pci 0000:00:1c.1: System wakeup disabled by ACPI
[KERNEL] [ 0.030048] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[KERNEL] [ 0.030082] pci 0000:00:1d.0: reg 0x20: [io 0xd400-0xd41f]
[KERNEL] [ 0.030139] pci 0000:00:1d.0: System wakeup disabled by ACPI
[KERNEL] [ 0.030180] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[KERNEL] [ 0.030214] pci 0000:00:1d.1: reg 0x20: [io 0xd480-0xd49f]
[KERNEL] [ 0.030271] pci 0000:00:1d.1: System wakeup disabled by ACPI
[KERNEL] [ 0.030311] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[KERNEL] [ 0.030345] pci 0000:00:1d.2: reg 0x20: [io 0xd800-0xd81f]
[KERNEL] [ 0.030401] pci 0000:00:1d.2: System wakeup disabled by ACPI
[KERNEL] [ 0.030442] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[KERNEL] [ 0.030476] pci 0000:00:1d.3: reg 0x20: [io 0xd880-0xd89f]
[KERNEL] [ 0.030533] pci 0000:00:1d.3: System wakeup disabled by ACPI
[KERNEL] [ 0.030582] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[KERNEL] [ 0.030598] pci 0000:00:1d.7: reg 0x10: [mem 0xfeaf7c00-0xfeaf7fff]
[KERNEL] [ 0.030657] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[KERNEL] [ 0.030693] pci 0000:00:1d.7: System wakeup disabled by ACPI
[KERNEL] [ 0.030734] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[KERNEL] [ 0.030793] pci 0000:00:1e.0: System wakeup disabled by ACPI
[KERNEL] [ 0.030838] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[KERNEL] [ 0.030907] pci 0000:00:1f.0: address space collision: [io 0x0800-0x087f] conflicts with ACPI PM1a_EVT_BLK [??? 0x00000800-0x00000803 flags 0x80000000]
[KERNEL] [ 0.030911] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[KERNEL] [ 0.030914] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
[KERNEL] [ 0.031046] pci 0000:00:1c.0: PCI bridge to [bus 02]
[KERNEL] [ 0.031120] pci 0000:01:00.0: [1969:1026] type 00 class 0x020000
[KERNEL] [ 0.031142] pci 0000:01:00.0: reg 0x10: [mem 0xfebc0000-0xfebfffff 64bit]
[KERNEL] [ 0.031153] pci 0000:01:00.0: reg 0x18: [io 0xec00-0xec7f]
[KERNEL] [ 0.031227] pci 0000:01:00.0: PME# supported from D3hot D3cold
[KERNEL] [ 0.031278] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[KERNEL] [ 0.031287] pci 0000:00:1c.1: PCI bridge to [bus 01]
[KERNEL] [ 0.031290] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[KERNEL] [ 0.031293] pci 0000:00:1c.1: bridge window [mem 0xfeb00000-0xfebfffff]
[KERNEL] [ 0.031363] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[KERNEL] [ 0.031371] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[KERNEL] [ 0.031372] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[KERNEL] [ 0.031374] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[KERNEL] [ 0.031376] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[KERNEL] [ 0.031378] pci 0000:00:1e.0: bridge window [mem 0x7de00000-0xefffffff] (subtractive decode)
[KERNEL] [ 0.031379] pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xffffffff] (subtractive decode)
[KERNEL] [ 0.031394] pci_bus 0000:00: on NUMA node 0
[KERNEL] [ 0.031693] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[KERNEL] [ 0.031740] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[KERNEL] [ 0.031785] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[KERNEL] [ 0.031829] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[KERNEL] [ 0.031874] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[KERNEL] [ 0.031919] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[KERNEL] [ 0.031964] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[KERNEL] [ 0.032014] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
[KERNEL] [ 0.032074] ACPI: Enabled 3 GPEs in block 00 to 1F
[KERNEL] [ 0.032131] ACPI: bus type USB registered
[KERNEL] [ 0.032171] usbcore: registered new interface driver usbfs
[KERNEL] [ 0.032191] usbcore: registered new interface driver hub
[KERNEL] [ 0.032213] usbcore: registered new device driver usb
[KERNEL] [ 0.032312] wmi: Mapper loaded
[KERNEL] [ 0.032314] PCI: Using ACPI for IRQ routing
[KERNEL] [ 0.032316] PCI: pci_cache_line_size set to 64 bytes
[KERNEL] [ 0.032341] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[KERNEL] [ 0.032343] e820: reserve RAM buffer [mem 0x7dd80000-0x7fffffff]
[KERNEL] [ 0.032522] cfg80211: Calling CRDA to update world regulatory domain
[KERNEL] [ 0.032573] Switched to clocksource refined-jiffies
[KERNEL] [ 0.032615] pnp: PnP ACPI init
[KERNEL] [ 0.032620] ACPI: bus type PNP registered
[KERNEL] [ 0.032664] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[KERNEL] [ 0.032666] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[KERNEL] [ 0.032694] pnp 00:01: [dma 4]
[KERNEL] [ 0.032721] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[KERNEL] [ 0.032760] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[KERNEL] [ 0.032790] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
[KERNEL] [ 0.032823] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[KERNEL] [ 0.032959] system 00:05: [io 0x0290-0x0297] has been reserved
[KERNEL] [ 0.032961] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[KERNEL] [ 0.033111] system 00:06: [io 0x0400-0x041f] has been reserved
[KERNEL] [ 0.033113] system 00:06: [io 0x04d0-0x04d1] has been reserved
[KERNEL] [ 0.033115] system 00:06: [io 0x0800-0x087f] could not be reserved
[KERNEL] [ 0.033117] system 00:06: [io 0x0480-0x04bf] has been reserved
[KERNEL] [ 0.033119] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[KERNEL] [ 0.033122] system 00:06: [mem 0xfed20000-0xfed8ffff] has been reserved
[KERNEL] [ 0.033124] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[KERNEL] [ 0.033201] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
[KERNEL] [ 0.033268] pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active)
[KERNEL] [ 0.033330] system 00:09: [mem 0xffc00000-0xffefffff] has been reserved
[KERNEL] [ 0.033333] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[KERNEL] [ 0.033526] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[KERNEL] [ 0.033528] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[KERNEL] [ 0.033530] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[KERNEL] [ 0.033614] system 00:0b: [mem 0xf0000000-0xf3ffffff] has been reserved
[KERNEL] [ 0.033617] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[KERNEL] [ 0.033771] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
[KERNEL] [ 0.033774] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
[KERNEL] [ 0.033776] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
[KERNEL] [ 0.033778] system 00:0c: [mem 0x00100000-0x7ddfffff] could not be reserved
[KERNEL] [ 0.033780] system 00:0c: [mem 0xf0000000-0xffffffff] could not be reserved
[KERNEL] [ 0.033782] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[KERNEL] [ 0.033889] pnp: PnP ACPI: found 13 devices
[KERNEL] [ 0.033890] ACPI: bus type PNP unregistered
[KERNEL] [ 0.070260] Switched to clocksource acpi_pm
[KERNEL] [ 0.070272] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[KERNEL] [ 0.070275] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[KERNEL] [ 0.070277] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
[KERNEL] [ 0.070284] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[KERNEL] [ 0.070293] pci 0000:00:1f.0: BAR 7: [io 0x0800-0x087f] has bogus alignment
[KERNEL] [ 0.070296] pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[KERNEL] [ 0.070298] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[KERNEL] [ 0.070300] pci 0000:00:1c.1: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[KERNEL] [ 0.070302] pci 0000:00:1c.0: res[7]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[KERNEL] [ 0.070306] pci 0000:00:1c.0: BAR 8: assigned [mem 0x7de00000-0x7dffffff]
[KERNEL] [ 0.070308] pci 0000:00:1c.0: BAR 9: assigned [mem 0x80000000-0x801fffff 64bit pref]
[KERNEL] [ 0.070311] pci 0000:00:1c.1: BAR 9: assigned [mem 0x80200000-0x803fffff 64bit pref]
[KERNEL] [ 0.070314] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff]
[KERNEL] [ 0.070316] pci 0000:00:1c.0: PCI bridge to [bus 02]
[KERNEL] [ 0.070318] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[KERNEL] [ 0.070322] pci 0000:00:1c.0: bridge window [mem 0x7de00000-0x7dffffff]
[KERNEL] [ 0.070325] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff 64bit pref]
[KERNEL] [ 0.070330] pci 0000:00:1c.1: PCI bridge to [bus 01]
[KERNEL] [ 0.070332] pci 0000:00:1c.1: bridge window [io 0xe000-0xefff]
[KERNEL] [ 0.070336] pci 0000:00:1c.1: bridge window [mem 0xfeb00000-0xfebfffff]
[KERNEL] [ 0.070339] pci 0000:00:1c.1: bridge window [mem 0x80200000-0x803fffff 64bit pref]
[KERNEL] [ 0.070344] pci 0000:00:1e.0: PCI bridge to [bus 03]
[KERNEL] [ 0.070353] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[KERNEL] [ 0.070354] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[KERNEL] [ 0.070356] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[KERNEL] [ 0.070358] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[KERNEL] [ 0.070359] pci_bus 0000:00: resource 8 [mem 0x7de00000-0xefffffff]
[KERNEL] [ 0.070361] pci_bus 0000:00: resource 9 [mem 0xf4000000-0xffffffff]
[KERNEL] [ 0.070363] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[KERNEL] [ 0.070364] pci_bus 0000:02: resource 1 [mem 0x7de00000-0x7dffffff]
[KERNEL] [ 0.070366] pci_bus 0000:02: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
[KERNEL] [ 0.070368] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[KERNEL] [ 0.070370] pci_bus 0000:01: resource 1 [mem 0xfeb00000-0xfebfffff]
[KERNEL] [ 0.070371] pci_bus 0000:01: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[KERNEL] [ 0.070373] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
[KERNEL] [ 0.070375] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
[KERNEL] [ 0.070376] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[KERNEL] [ 0.070378] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
[KERNEL] [ 0.070380] pci_bus 0000:03: resource 8 [mem 0x7de00000-0xefffffff]
[KERNEL] [ 0.070381] pci_bus 0000:03: resource 9 [mem 0xf4000000-0xffffffff]
[KERNEL] [ 0.070401] NET: Registered protocol family 2
[KERNEL] [ 0.070542] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[KERNEL] [ 0.070556] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[KERNEL] [ 0.070572] TCP: Hash tables configured (established 8192 bind 8192)
[KERNEL] [ 0.070596] TCP: reno registered
[KERNEL] [ 0.070597] UDP hash table entries: 512 (order: 1, 8192 bytes)
[KERNEL] [ 0.070603] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[KERNEL] [ 0.070626] NET: Registered protocol family 1
[KERNEL] [ 0.070636] pci 0000:00:02.0: Boot video device
[KERNEL] [ 0.070847] PCI: CLS 32 bytes, default 64
[KERNEL] [ 0.070945] Trying to unpack rootfs image as initramfs...
[KERNEL] [ 0.072784] rootfs image is not initramfs (no cpio magic); looks like an initrd
[KERNEL] [ 0.076641] Freeing initrd memory: 3180K (f7c85000 - f7fa0000)
[KERNEL] [ 0.077036] futex hash table entries: 256 (order: -1, 3072 bytes)
[KERNEL] [ 0.077240] ROMFS MTD (C) 2007 Red Hat, Inc.
[KERNEL] [ 0.077245] msgmni has been set to 1761
[KERNEL] [ 0.077331] io scheduler noop registered
[KERNEL] [ 0.077335] io scheduler cfq registered (default)
[KERNEL] [ 0.077406] pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
[KERNEL] [ 0.077706] intel_idle: does not run on family 6 model 23
[KERNEL] [ 0.077787] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[KERNEL] [ 0.077791] ACPI: Power Button [PWRB]
[KERNEL] [ 0.077841] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[KERNEL] [ 0.077843] ACPI: Power Button [PWRF]
[KERNEL] [ 0.078338] brd: module loaded
[KERNEL] [ 0.078419] zram: Created 1 device(s) ...
[KERNEL] [ 0.078423] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[KERNEL] [ 0.078424] ehci-pci: EHCI PCI platform driver
[KERNEL] [ 0.078493] ehci-pci 0000:00:1d.7: EHCI Host Controller
[KERNEL] [ 0.078499] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[KERNEL] [ 0.078512] ehci-pci 0000:00:1d.7: debug port 1
[KERNEL] [ 0.082409] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[KERNEL] [ 0.082420] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfeaf7c00
[KERNEL] [ 0.087727] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[KERNEL] [ 0.087790] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[KERNEL] [ 0.087794] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[KERNEL] [ 0.087798] usb usb1: Product: EHCI Host Controller
[KERNEL] [ 0.087801] usb usb1: Manufacturer: Linux 3.14.51 ehci_hcd
[KERNEL] [ 0.087805] usb usb1: SerialNumber: 0000:00:1d.7
[KERNEL] [ 0.087965] hub 1-0:1.0: USB hub found
[KERNEL] [ 0.087971] hub 1-0:1.0: 8 ports detected
[KERNEL] [ 0.088067] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[KERNEL] [ 0.088069] ohci-pci: OHCI PCI platform driver
[KERNEL] [ 0.088088] uhci_hcd: USB Universal Host Controller Interface driver
[KERNEL] [ 0.088146] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[KERNEL] [ 0.088151] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[KERNEL] [ 0.088170] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
[KERNEL] [ 0.088205] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[KERNEL] [ 0.088206] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[KERNEL] [ 0.088208] usb usb2: Product: UHCI Host Controller
[KERNEL] [ 0.088210] usb usb2: Manufacturer: Linux 3.14.51 uhci_hcd
[KERNEL] [ 0.088211] usb usb2: SerialNumber: 0000:00:1d.0
[KERNEL] [ 0.088304] hub 2-0:1.0: USB hub found
[KERNEL] [ 0.088309] hub 2-0:1.0: 2 ports detected
[KERNEL] [ 0.088405] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[KERNEL] [ 0.088409] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[KERNEL] [ 0.088432] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480
[KERNEL] [ 0.088463] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[KERNEL] [ 0.088465] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[KERNEL] [ 0.088467] usb usb3: Product: UHCI Host Controller
[KERNEL] [ 0.088468] usb usb3: Manufacturer: Linux 3.14.51 uhci_hcd
[KERNEL] [ 0.088470] usb usb3: SerialNumber: 0000:00:1d.1
[KERNEL] [ 0.088562] hub 3-0:1.0: USB hub found
[KERNEL] [ 0.088567] hub 3-0:1.0: 2 ports detected
[KERNEL] [ 0.088662] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[KERNEL] [ 0.088666] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[KERNEL] [ 0.088688] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
[KERNEL] [ 0.088724] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[KERNEL] [ 0.088726] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[KERNEL] [ 0.088728] usb usb4: Product: UHCI Host Controller
[KERNEL] [ 0.088729] usb usb4: Manufacturer: Linux 3.14.51 uhci_hcd
[KERNEL] [ 0.088731] usb usb4: SerialNumber: 0000:00:1d.2
[KERNEL] [ 0.088824] hub 4-0:1.0: USB hub found
[KERNEL] [ 0.088829] hub 4-0:1.0: 2 ports detected
[KERNEL] [ 0.088923] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[KERNEL] [ 0.088927] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[KERNEL] [ 0.088948] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880
[KERNEL] [ 0.088979] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[KERNEL] [ 0.088981] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[KERNEL] [ 0.088982] usb usb5: Product: UHCI Host Controller
[KERNEL] [ 0.088984] usb usb5: Manufacturer: Linux 3.14.51 uhci_hcd
[KERNEL] [ 0.088985] usb usb5: SerialNumber: 0000:00:1d.3
[KERNEL] [ 0.089076] hub 5-0:1.0: USB hub found
[KERNEL] [ 0.089081] hub 5-0:1.0: 2 ports detected
[KERNEL] [ 0.089248] i8042: PNP: No PS/2 controller found. Probing ports directly.
[KERNEL] [ 0.091872] serio: i8042 KBD port at 0x60,0x64 irq 1
[KERNEL] [ 0.091897] serio: i8042 AUX port at 0x60,0x64 irq 12
[KERNEL] [ 0.091949] hv_vmbus: registering driver hyperv_keyboard
[KERNEL] [ 0.091991] mousedev: PS/2 mouse device common for all mice
[KERNEL] [ 0.092167] input: PC Speaker as /devices/platform/pcspkr/input/input3
[KERNEL] [ 0.092245] hidraw: raw HID events driver (C) Jiri Kosina
[KERNEL] [ 0.092382] hv_vmbus: registering driver hid_hyperv
[KERNEL] [ 0.092608] usbcore: registered new interface driver usbhid
[KERNEL] [ 0.092609] usbhid: USB HID core driver
[KERNEL] [ 0.092661] TCP: cubic registered
[KERNEL] [ 0.092665] NET: Registered protocol family 17
[KERNEL] [ 0.092701] Using IPI Shortcut mode
[KERNEL] [ 0.145830] RAMDISK: xz image found at block 0
[KERNEL] [ 0.491355] usb 1-4: new high-speed USB device number 4 using ehci-pci
[KERNEL] [ 0.534670] VFS: Mounted root (romfs filesystem) readonly on device 1:0.
[KERNEL] [ 0.534693] devtmpfs: mounted
[KERNEL] [ 0.534814] Freeing unused kernel memory: 316K (c051e000 - c056d000)
[KERNEL] [ 0.534843] Write protecting the kernel text: 3176k
[KERNEL] [ 0.534852] Write protecting the kernel read-only data: 832k
[KERNEL] [ 0.607088] usb 1-4: New USB device found, idVendor=04a9, idProduct=173a
[KERNEL] [ 0.607093] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[KERNEL] [ 0.607097] usb 1-4: Product: MP250 series
[KERNEL] [ 0.607101] usb 1-4: Manufacturer: Canon
[KERNEL] [ 0.607105] usb 1-4: SerialNumber: 40DD8B
[KERNEL] [ 0.813773] usb 3-1: new low-speed USB device number 2 using uhci_hcd
[pfac] Ok, PID 452.
[initrd] WTware shell v.5.2.41
[initrd] PCI: C 06 8086:2e30 Bridge Intel Corporation 4 Series Chipset DRAM Controller.
[initrd] PCI: C 03 8086:2e32 Display controller Intel Corporation 4 Series Chipset Integrated Graphics Controller.
[initrd] PCI: C 04:03 8086:27d8 Multimedia controller Audio device Intel Corporation NM10/ICH7 Family High Definition Audio Controller.
[initrd] PCI: C 06:04 8086:27d0 Bridge PCI bridge Intel Corporation NM10/ICH7 Family PCI Express Port 1.
[initrd] PCI: C 06:04 8086:27d2 Bridge PCI bridge Intel Corporation NM10/ICH7 Family PCI Express Port 2.
[initrd] PCI: C 0c:03 8086:27c8 Serial bus controller USB controller Intel Corporation NM10/ICH7 Family USB UHCI Controller.
[initrd] PCI: C 0c:03 8086:27c9 Serial bus controller USB controller Intel Corporation NM10/ICH7 Family USB UHCI Controller.
[initrd] PCI: C 0c:03 8086:27ca Serial bus controller USB controller Intel Corporation NM10/ICH7 Family USB UHCI Controller.
[initrd] PCI: C 0c:03 8086:27cb Serial bus controller USB controller Intel Corporation NM10/ICH7 Family USB UHCI Controller.
[initrd] PCI: C 0c:03 8086:27cc Serial bus controller USB controller Intel Corporation NM10/ICH7 Family USB2 EHCI Controller.
[initrd] PCI: C 06:04 8086:244e Bridge PCI bridge Intel Corporation 82801 PCI Bridge.
[initrd] PCI: C 06:01 8086:27b8 Bridge ISA bridge Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge.
[initrd] PCI: C 02 1969:1026 Network controller Qualcomm Atheros AR8121/AR8113/AR8114 Gigabit or Fast Ethernet.
[initrd] USB: 04a9:173a Canon, Inc..
[KERNEL] [ 0.974462] usb 3-1: New USB device found, idVendor=0458, idProduct=003a
[KERNEL] [ 0.974470] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[KERNEL] [ 0.974481] usb 3-1: Product: Optical Mouse
[KERNEL] [ 0.974485] usb 3-1: Manufacturer: Genius
[KERNEL] [ 1.002525] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/0003:0458:003A.0001/input/input6
[KERNEL] [ 1.003298] hid-generic 0003:0458:003A.0001: input,hidraw0: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.1-1/input0
[KERNEL] [ 1.076283] tsc: Refined TSC clocksource calibration: 2700.000 MHz
[KERNEL] [ 1.076291] Switched to clocksource tsc
[KERNEL] [ 1.415600] usb 2-1: new low-speed USB device number 2 using uhci_hcd
[KERNEL] [ 1.580201] usb 2-1: New USB device found, idVendor=040b, idProduct=2000
[KERNEL] [ 1.580205] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[KERNEL] [ 1.580209] usb 2-1: Product: USB Keyboard
[KERNEL] [ 1.580213] usb 2-1: Manufacturer: Generic
[KERNEL] [ 1.599227] input: Generic USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/0003:040B:2000.0002/input/input7
[KERNEL] [ 1.599749] hid-generic 0003:040B:2000.0002: input,hidraw1: USB HID v1.10 Keyboard [Generic USB Keyboard] on usb-0000:00:1d.0-1/input0
[KERNEL] [ 1.627722] input: Generic USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/0003:040B:2000.0003/input/input8
[KERNEL] [ 1.628496] hid-generic 0003:040B:2000.0003: input,hidraw2: USB HID v1.10 Mouse [Generic USB Keyboard] on usb-0000:00:1d.0-1/input1
[initrd] Load ethernet drivers.
[initrd] modprobe atl1e.
[initrd] NIC module atl1e.ko loaded.
[KERNEL] [ 4.148675] ATL1E 0000:01:00.0 eth0: NIC Link is Up <100 Mbps Full Duplex>
[initrd] eth0: 1969:1026. Apply WOL configuration.
[initrd] dhcp: 328 bytes from 192.168.20.1.
[initrd] 00000000:000001340000000000110000c0a81401c0a81469004300440134000002010600 ...4............i.C.D.4......
[initrd] 00000020:67458b6b0000000000000000c0a81469c0a8140500000000e0cb4eca25570000 gE.k..........i.........N.%W..
[initrd] 00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
[initrd] 00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
[initrd] dhcp: 328 bytes from 192.168.20.1.
[initrd] 00000000:000001340000000000110000c0a81401c0a81469004300440134000002010600 ...4............i.C.D.4......
[initrd] 00000020:67458b6b0000000000000000c0a81469c0a8140500000000e0cb4eca25570000 gE.k..........i.........N.%W..
[initrd] 00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
[initrd] 00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
[initrd] dhcp: server address 192.168.20.1.
[initrd] dhcp: 192.168.20.105/255.255.255.0.
[initrd] dhcp: default gateway 192.168.20.1.
[initrd] dhcp: DNS 192.168.20.1.
[initrd] Doesn't understand value �� in 066 DHCP option.
[initrd] dhcp: TFTP 192.168.20.5.
[initrd] dhcp: boot file (header) last\wtware.pxe.
[initrd] TFTP binary "last\", configs prefix "", using "\" slash.
Send broadcast WTCU discover.
[initrd] TFTP: download and unpack file last\packages\lib6 from 192.168.20.5.
[initrd] WTware TFTP v.5.2.41.
[initrd] TFTP: download file Everyone\list.wtc from 192.168.20.5.
/--- FILE "/tmp/list.wtc" -----------------------
| #
| # Ñïèñîê ïîäêëþ÷àåìûõ ôàéëîâ.
| #
| # Ýòîò îòäåëüíûé ìåõàíèçì íàñòðîéêè òåðìèíàëîâ ïðåäíàçíà÷åí òîëüêî
| # äëÿ ðó÷íîãî êîíôèãóðèðîâàíèÿ òåðìèíàëîâ. Ãðàôè÷åñêèé êîíôèãóðàòîð
| # íå ÷èòàåò list.wtc, íå ÷èòàåò è íå ïîçâîëÿåò ðåäàêòèðîâàòü ôàéëû
| # èç êàòàëîãà ListIncludes. Ïîýòîìó íåëüçÿ ïûòàòüñÿ íàñòðàèâàòü îäèí
| # è òîò æå òåðìèíàë è êîíôèãóðàòîðîì, è ÷åðåç list.wtc.
| #
| # Ôîðìàò ñòðîêè â ýòîì ôàéëå:
| # 
| # 01.02.03.04.05.06[([èìÿïîëüçîâàòåëÿ@][èìÿòåðìèíàëà])] [ôàéë [ôàéë ...]]] [# êîììåíòàðèé]
| #
| # Ïðèìåðû:
| #
| # 02.03.04.05.06.07 file1
| #
| # Îçíà÷àåò, ÷òî òåðìèíàë ñ ìàê-àäðåñîì 02.03.04.05.06.07 ïðî÷èòàåò
| # ïàðàìåòðû èç ôàéëà ListIncludes/file1.
| #
| #
| # 03.04.05.06.07.08(vasja@) file2
| #
| # Îçíà÷àåò, ÷òî òåðìèíàë ñ ìàê-àäðåñîì 03.04.05.06.07.08 ïðî÷èòàåò
| # ïàðàìåòðû èç ôàéëà ListIncludes/file2 è â îêîøêî "Âõîä â Windows"
| # ïîäñòàâèò èìÿ ïîëüçîâàòåëÿ "vasja".
| #
| #
| # 04.05.06.07.08.09(term5) file6 file7 # Êîìï çàìãëàâáóõà.
| #
| # Îçíà÷àåò, ÷òî òåðìèíàëó ñ ìàê-àäðåñîì 04.05.06.07.08.09 áóäåò
| # ïðèñâîåíî èìÿ term5, àíàëîãè÷íî óêàçàíèþ ïàðàìåòðà clienthostname,
| # è îí ïðî÷èòàåò ïàðàìåòðû èç ôàéëîâ ListIncludes/file6 è
| # ListIncludes/file7.
| #
| #
| # ×òîáû ìîæíî áûëî óêàçûâàòü èìÿ ïîëüçîâàòåëÿ ðóññêèìè áóêâàìè, íàäî
| # îòêðûòü ýòîò ôàéë â Notepad è ñîõðàíèòü ñ Encoding: Unicode.
| #
\----------------------------------------------------
[initrd] TFTP: download file Terminals\E0.CB.4E.CA.25.57\config.wtc from 192.168.20.5.
/--- FILE "/tmp/config.wtc" -----------------------
| clienthostname=aa.kanaev
| user=AELITA\aa.kanaev[aa.kanaev]
| display=1366x768
| scanner=on
| connection 1C
| next screen
| connection Win
| next screen
| connection Chrome
\----------------------------------------------------
[initrd] TFTP: download file Everyone\all.wtc from 192.168.20.5.
/--- FILE "/tmp/all.wtc" -----------------------
| [BOM]
| vnc=on
| language=ru
| chrome_url=https://www.google.ru/
\----------------------------------------------------
[initrd] TFTP: download file Everyone\wtware.lic from 192.168.20.5.
[initrd] TFTP: download file Connections\1C.wtc from 192.168.20.5.
/--- FILE "/tmp/tmp.wtc" -----------------------
| [BOM]
| server=192.168.1.1
| domain=aelita.local
\----------------------------------------------------
[initrd] TFTP: download file Connections\Win.wtc from 192.168.20.5.
/--- FILE "/tmp/tmp.wtc" -----------------------
| [BOM]
| server=192.168.20.10
| domain=aelita.local
| graphic=a
\----------------------------------------------------
[initrd] TFTP: download file Connections\Chrome.wtc from 192.168.20.5.
/--- FILE "/tmp/tmp.wtc" -----------------------
| [BOM]
| application=chrome
| keyboard=en-us
| chrome_mode=default
| chrome_url=https://www.google.ru/
\----------------------------------------------------
/--- FILE "/etc/config.compiled" -----------------------
| [BOM]
| vnc=on
| language=ru
| chrome_url=https://www.google.ru/
| clienthostname=aa.kanaev
| user=AELITA\aa.kanaev[aa.kanaev]
| display=1366x768
| scanner=on
| connection 1C
| server=192.168.1.1
| domain=aelita.local
| next screen
| connection Win
| server=192.168.20.10
| domain=aelita.local
| graphic=a
| next screen
| connection Chrome
| application=chrome
| keyboard=en-us
| chrome_mode=default
| chrome_url=https://www.google.ru/
\----------------------------------------------------
[initrd] Hostname: "aa.kanaev".
Saned listener is active.
RSH: listener is active.
Everyone can control terminal by HTTP.
[initrd] Use 'video=intel(U)' driver.
/--- FILE "/etc/config.compiled" -----------------------
| [BOM]
| vnc=on
| language=ru
| chrome_url=https://www.google.ru/
| clienthostname=aa.kanaev
| user=AELITA\aa.kanaev[aa.kanaev]
| display=1366x768
| scanner=on
| video=intel(U)
| connection 1C
| server=192.168.1.1
| domain=aelita.local
| next screen
| connection Win
| server=192.168.20.10
| domain=aelita.local
| graphic=a
| next screen
| connection Chrome
| application=chrome
| keyboard=en-us
| chrome_mode=default
| chrome_url=https://www.google.ru/
\----------------------------------------------------
[initrd] TFTP: download and unpack file last\packages\uintel from 192.168.20.5.
[initrd] TFTP: download and unpack file last\packages\f from 192.168.20.5.
[KERNEL] [ 8.751439] random: nonblocking pool is initialized
[initrd] TFTP: download and unpack file last\packages\u from 192.168.20.5.
[initrd] TFTP: download and unpack file last\packages\graphic from 192.168.20.5.
[gm] WTware session manager v.5.2.41.
[gm] Load agpgart driver.
[gm] modprobe agpgart.
[gm] modprobe intel-agp.
[KERNEL] [ 12.256696] Linux agpgart interface v0.103
[KERNEL] [ 12.258321] agpgart-intel 0000:00:00.0: Intel G41 Chipset
[KERNEL] [ 12.258337] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[KERNEL] [ 12.258573] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[KERNEL] [ 12.259102] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[gm] TFTP: download and unpack file last\packages\uetc from 192.168.20.5.
[gm] WTware TFTP v.5.2.41.
[gm] Add keyboard event5: Generic USB Keyboard.
[gm] Add keyboard event4: Generic USB Keyboard.
[gm] EV_REL flag found. Add mouse event3: Genius Optical Mouse.
[gm] Ignore event2: PC Speaker.
[gm] Add keyboard event1: Power Button.
[gm] Add keyboard event0: Power Button.
[gm] Display mode: 1366x768, 16 bit, 0 Hz, modeline "", DDC enabled, connector 0.
/--- FILE "/etc/xorg.conf" -----------------------
| Section "InputDevice"
| Identifier "Keyboard0"
| Driver "evdev"
| Option "Device" "/dev/input/event5"
| Option "SendCoreEvents" "on"
| Option "XkbLayout" "us,ru"
| Option "XkbRules" "evdev"
| Option "XkbOptions" "grp:ctrl_shift_toggle"
| EndSection
| Section "InputDevice"
| Identifier "Keyboard1"
| Driver "evdev"
| Option "Device" "/dev/input/event4"
| Option "SendCoreEvents" "on"
| Option "XkbLayout" "us,ru"
| Option "XkbRules" "evdev"
| Option "XkbOptions" "grp:ctrl_shift_toggle"
| EndSection
| Section "InputDevice"
| Identifier "Mouse0"
| Driver "evdev"
| Option "Device" "/dev/input/event3"
| Option "SendCoreEvents" "on"
| EndSection
| Section "InputDevice"
| Identifier "Keyboard2"
| Driver "evdev"
| Option "Device" "/dev/input/event1"
| Option "SendCoreEvents" "on"
| Option "XkbLayout" "us,ru"
| Option "XkbRules" "evdev"
| Option "XkbOptions" "grp:ctrl_shift_toggle"
| EndSection
| Section "InputDevice"
| Identifier "Keyboard3"
| Driver "evdev"
| Option "Device" "/dev/input/event0"
| Option "SendCoreEvents" "on"
| Option "XkbLayout" "us,ru"
| Option "XkbRules" "evdev"
| Option "XkbOptions" "grp:ctrl_shift_toggle"
| EndSection
| Section "ServerFlags"
| Option "DontVTSwitch" "on"
| Option "DontZoom" "on"
| Option "DontZap" "on"
| Option "NoPM" "on"
| Option "AIGLX" "off"
| Option "AutoAddDevices" "off"
| EndSection
| Section "Device"
| Identifier "Video0"
| Driver "intel"
| EndSection
| Section "Monitor"
| Identifier "Monitor0"
| HorizSync 20-200
| VertRefresh 50-60
| Option "PreferredMode" "1366x768"
| EndSection
| Section "Screen"
| Identifier "Screen0"
| Device "Video0"
| Monitor "Monitor0"
| DefaultDepth 16
| SubSection "Display"
| Depth 16
| Modes "1366x768"
| Virtual 1366 768
| EndSubSection
| EndSection
| Section "ServerLayout"
| Identifier "Layout"
| Screen "Screen0"
| InputDevice "Keyboard0"
| InputDevice "Keyboard1"
| InputDevice "Mouse0"
| InputDevice "Keyboard2"
| InputDevice "Keyboard3"
| EndSection
\----------------------------------------------------
[gm] modprobe i915.
[KERNEL] [ 17.088761] [drm] Initialized drm 1.1.0 20060810
[KERNEL] [ 17.092408] [drm] Memory usable by graphics device = 2048M
[KERNEL] [ 17.100546] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[KERNEL] [ 17.100551] [drm] Driver supports precise vblank timestamp query.
[KERNEL] [ 17.169541] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[KERNEL] [ 17.169543] i915 0000:00:02.0: registered panic notifier
[KERNEL] [ 17.169550] i915: No ACPI video bus found
[KERNEL] [ 17.169836] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[pfac] Got command line /usr/bin/Xorg -nolisten inet6 -s 0 -quiet -logfile /tmp/Xorg.0.log.
[pfac] Ok, PID 522.
[X] [ 17.172] 
[X] X.Org X Server 1.17.1
[X] Release Date: 2015-02-10
[X] [ 17.172] X Protocol Version 11, Revision 0
[X] [ 17.172] Build Operating System: Linux 3.2.0-76-generic i686 Ubuntu
[X] [ 17.172] Current Operating System: Linux (none) 3.14.51 #1 PREEMPT Sat Aug 29 02:08:06 SAMT 2015 i686
[X] [ 17.172] Kernel command line: root=/dev/ram0 memtest=1 quiet initrd=packages/initrd BOOT_IMAGE=packages/kernel 
[X] [ 17.172] Build Date: 19 March 2015 09:27:07AM
[X] [ 17.172] xorg-server 2:1.17.1-0ubuntu3 (For technical support please see http://www.ubuntu.com/support) 
[X] [ 17.172] Current version of pixman: 0.32.6
[X] [ 17.172] Before reporting problems, check http://wiki.x.org
[X] to make sure that you have the latest version.
[X] [ 17.172] Markers: (--) probed, (**) from config file, (==) default setting,
[X] (++) from command line, (!!) notice, (II) informational,
[X] (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[X] [ 17.172] (++) Log file: "/tmp/Xorg.0.log", Time: Fri Sep 4 14:12:40 2015
[X] [ 17.172] (==) Using config file: "/etc/xorg.conf"
[X] [ 17.173] (==) ServerLayout "Layout"
[X] [ 17.173] (**) |-->Screen "Screen0" (0)
[X] [ 17.173] (**) | |-->Monitor "Monitor0"
[X] [ 17.173] (**) | |-->Device "Video0"
[X] [ 17.173] (**) |-->Input Device "Keyboard0"
[X] [ 17.173] (**) |-->Input Device "Keyboard1"
[X] [ 17.173] (**) |-->Input Device "Mouse0"
[X] [ 17.173] (**) |-->Input Device "Keyboard2"
[X] [ 17.173] (**) |-->Input Device "Keyboard3"
[X] [ 17.173] (**) Option "DontVTSwitch" "on"
[X] [ 17.173] (**) Option "DontZap" "on"
[X] [ 17.173] (**) Option "DontZoom" "on"
[X] [ 17.173] (**) Option "NoPM" "on"
[X] [ 17.173] (**) Option "AIGLX" "off"
[X] [ 17.173] (**) Option "AutoAddDevices" "off"
[X] [ 17.173] (**) Not automatically adding devices
[X] [ 17.173] (==) Automatically enabling devices
[X] [ 17.173] (==) Automatically adding GPU devices
[X] [ 17.173] (WW) The directory "/usr/share/fonts/X11/misc" does not exist.
[X] [ 17.173] Entry deleted from font path.
[X] [ 17.173] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[X] [ 17.173] Entry deleted from font path.
[X] [ 17.173] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[X] [ 17.173] Entry deleted from font path.
[X] [ 17.174] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[X] [ 17.174] Entry deleted from font path.
[X] [ 17.174] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[X] [ 17.174] Entry deleted from font path.
[X] [ 17.174] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[X] [ 17.174] Entry deleted from font path.
[X] [ 17.174] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[X] [ 17.174] Entry deleted from font path.
[X] [ 17.174] (==) FontPath set to:
[X] built-ins
[X] [ 17.174] (==) ModulePath set to "/usr/lib/i386-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[X] [ 17.174] (==) |-->Input Device "Keyboard0"
[X] [ 17.174] (==) |-->Input Device ""
[X] [ 17.174] (==) The core pointer device wasn't specified explicitly in the layout.
[X] Using the first mouse device.
[X] [ 17.174] (==) The core keyboard device wasn't specified explicitly in the layout.
[X] Using the default keyboard configuration.
[X] [ 17.174] (II) Loader magic: 0xb779b700
[X] [ 17.174] (II) Module ABI versions:
[X] [ 17.174] X.Org ANSI C Emulation: 0.4
[X] [ 17.174] X.Org Video Driver: 19.0
[X] [ 17.174] X.Org XInput driver : 21.0
[X] [ 17.174] X.Org Server Extension : 9.0
[X] [ 17.174] (II) xfree86: Adding drm device (/dev/dri/card0)
[X] [ 17.231] (--) PCI:*(0:0:2:0) 8086:2e32:1043:836d rev 3, Mem @ 0xfe400000/4194304, 0xe0000000/268435456, I/O @ 0x0000dc00/8
[X] [ 17.231] (II) LoadModule: "glx"
[X] [ 17.232] (WW) Warning, couldn't open module glx
[X] [ 17.232] (II) UnloadModule: "glx"
[X] [ 17.232] (II) Unloading glx
[X] [ 17.232] (EE) Failed to load module "glx" (module does not exist, 0)
[X] [ 17.232] (II) LoadModule: "intel"
[X] [ 17.232] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[X] [ 17.232] (II) Module intel: vendor="X.Org Foundation"
[X] [ 17.232] compiled for 1.17.1, module version = 2.99.917
[X] [ 17.232] Module class: X.Org Video Driver
[X] [ 17.232] ABI class: X.Org Video Driver, version 19.0
[X] [ 17.232] (II) LoadModule: "evdev"
[X] [ 17.232] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[X] [ 17.232] (II) Module evdev: vendor="X.Org Foundation"
[X] [ 17.232] compiled for 1.16.0, module version = 2.9.0
[X] [ 17.232] Module class: X.Org XInput Driver
[X] [ 17.232] ABI class: X.Org XInput driver, version 21.0
[X] [ 17.232] (II) LoadModule: "kbd"
[X] [ 17.233] (WW) Warning, couldn't open module kbd
[X] [ 17.233] (II) UnloadModule: "kbd"
[X] [ 17.233] (II) Unloading kbd
[X] [ 17.233] (EE) Failed to load module "kbd" (module does not exist, 0)
[X] [ 17.233] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
[X] i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
[X] 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
[X] Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
[X] GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[X] [ 17.234] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[X] [ 17.234] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[X] [ 17.234] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[X] [ 17.234] (--) using VT number 2
[X] [ 17.236] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20080730
[X] [ 17.236] (II) intel(0): SNA compiled: xserver-xorg-video-intel 2:2.99.917-1~exp1ubuntu2.2 (Alessio Treglia )
[X] [ 17.236] (II) intel(0): SNA compiled for use with valgrind
[X] [ 17.236] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[X] [ 17.236] (--) intel(0): Integrated Graphics Chipset: Intel(R) G41
[X] [ 17.236] (--) intel(0): CPU: x86, sse2, sse3, ssse3
[X] [ 17.236] (**) intel(0): Depth 16, (--) framebuffer bpp 16
[X] [ 17.236] (==) intel(0): RGB weight 565
[X] [ 17.236] (==) intel(0): Default visual is TrueColor
[X] [ 17.236] (II) intel(0): Output VGA1 using monitor section Monitor0
[X] [ 17.236] (**) intel(0): Option "PreferredMode" "1366x768"
[X] [ 17.236] (II) intel(0): Enabled output VGA1
[X] [ 17.236] (--) intel(0): Using a maximum size of 64x64 for hardware cursors
[X] [ 17.236] (II) intel(0): Output VIRTUAL1 has no monitor section
[X] [ 17.236] (II) intel(0): Enabled output VIRTUAL1
[X] [ 17.236] (--) intel(0): Output VGA1 using initial mode 1366x768 on pipe 0
[X] [ 17.236] (==) intel(0): TearFree disabled
[X] [ 17.236] (==) intel(0): DPI set to (96, 96)
[X] [ 17.236] (II) Loading sub module "dri2"
[X] [ 17.236] (II) LoadModule: "dri2"
[X] [ 17.236] (II) Module "dri2" already built-in
[X] [ 17.236] (II) Loading sub module "present"
[X] [ 17.236] (II) LoadModule: "present"
[X] [ 17.236] (II) Module "present" already built-in
[X] [ 17.237] (II) intel(0): SNA initialized with Eaglelake (gen4.5) backend
[X] [ 17.237] (==) intel(0): Backing store enabled
[X] [ 17.237] (==) intel(0): Silken mouse enabled
[X] [ 17.237] (II) intel(0): HW Cursor enabled
[X] [ 17.237] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[X] [ 17.237] (==) intel(0): DPMS enabled
[X] [ 17.237] (==) intel(0): display hotplug detection enabled
[X] [ 17.237] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[X] [ 17.237] (II) intel(0): [DRI2] Setup complete
[X] [ 17.237] (II) intel(0): [DRI2] DRI driver: i965
[X] [ 17.237] (II) intel(0): [DRI2] VDPAU driver: i965
[X] [ 17.237] (II) intel(0): direct rendering: DRI2 enabled
[X] [ 17.237] (II) intel(0): hardware support for Present enabled
[X] [ 17.237] (WW) intel(0): Option "PreferredMode" is not used
[X] [ 17.237] (--) RandR disabled
[X] [ 17.244] (II) SELinux: Disabled on system
[X] [ 17.247] (II) intel(0): switch to mode 1366x768@59.8 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none
[X] [ 17.333] (II) intel(0): Setting screen physical size to 361 x 203
[X] [ 17.336] (II) XKB: generating xkmfile /var/lib/xkb/server-02D8252E59564A234380F1E5417646A9DB3B7452.xkm
[X] [ 17.353] (II) Using input driver 'evdev' for 'Keyboard0'
[X] [ 17.353] (**) Option "SendCoreEvents" "on"
[X] [ 17.353] (**) Option "CorePointer" "on"
[X] [ 17.353] (**) Keyboard0: always reports core events
[X] [ 17.354] (**) evdev: Keyboard0: Device: "/dev/input/event5"
[X] [ 17.354] (--) evdev: Keyboard0: Vendor 0x40b Product 0x2000
[X] [ 17.354] (--) evdev: Keyboard0: Found scroll wheel(s)
[X] [ 17.354] (II) evdev: Keyboard0: Forcing buttons for scroll wheel(s)
[X] [ 17.354] (--) evdev: Keyboard0: Found relative axes
[X] [ 17.354] (--) evdev: Keyboard0: Found x and y relative axes
[X] [ 17.354] (--) evdev: Keyboard0: Found keys
[X] [ 17.354] (II) evdev: Keyboard0: Configuring as mouse
[X] [ 17.354] (II) evdev: Keyboard0: Configuring as keyboard
[X] [ 17.354] (II) evdev: Keyboard0: Adding scrollwheel support
[X] [ 17.354] (**) evdev: Keyboard0: YAxisMapping: buttons 4 and 5
[X] [ 17.354] (**) evdev: Keyboard0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[X] [ 17.354] (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD, id 6)
[X] [ 17.354] (**) Option "xkb_rules" "evdev"
[X] [ 17.354] (**) Option "xkb_model" "pc104"
[X] [ 17.354] (**) Option "xkb_layout" "us,ru"
[X] [ 17.354] (**) Option "xkb_options" "grp:ctrl_shift_toggle"
[X] [ 17.356] (II) XKB: generating xkmfile /var/lib/xkb/server-AE0D8D8D38226F8366A99588DAE9B4161E50C476.xkm
[X] [ 17.375] (II) evdev: Keyboard0: initialized for relative axes.
[X] [ 17.376] (**) Keyboard0: (accel) keeping acceleration scheme 1
[X] [ 17.376] (**) Keyboard0: (accel) acceleration profile 0
[X] [ 17.376] (**) Keyboard0: (accel) acceleration factor: 2.000
[X] [ 17.376] (**) Keyboard0: (accel) acceleration threshold: 4
[X] [ 17.376] (II) Using input driver 'evdev' for 'Keyboard1'
[X] [ 17.376] (**) Option "SendCoreEvents" "on"
[X] [ 17.376] (**) Keyboard1: always reports core events
[X] [ 17.376] (**) evdev: Keyboard1: Device: "/dev/input/event4"
[X] [ 17.376] (--) evdev: Keyboard1: Vendor 0x40b Product 0x2000
[X] [ 17.376] (--) evdev: Keyboard1: Found keys
[X] [ 17.376] (II) evdev: Keyboard1: Configuring as keyboard
[X] [ 17.376] (II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD, id 7)
[X] [ 17.376] (**) Option "xkb_rules" "evdev"
[X] [ 17.376] (**) Option "xkb_model" "pc104"
[X] [ 17.376] (**) Option "xkb_layout" "us,ru"
[X] [ 17.376] (**) Option "xkb_options" "grp:ctrl_shift_toggle"
[X] [ 17.376] (II) Using input driver 'evdev' for 'Mouse0'
[X] [ 17.376] (**) Option "SendCoreEvents" "on"
[X] [ 17.376] (**) Mouse0: always reports core events
[X] [ 17.376] (**) evdev: Mouse0: Device: "/dev/input/event3"
[X] [ 17.376] (--) evdev: Mouse0: Vendor 0x458 Product 0x3a
[X] [ 17.376] (--) evdev: Mouse0: Found 3 mouse buttons
[X] [ 17.376] (--) evdev: Mouse0: Found scroll wheel(s)
[X] [ 17.376] (--) evdev: Mouse0: Found relative axes
[X] [ 17.376] (--) evdev: Mouse0: Found x and y relative axes
[X] [ 17.376] (II) evdev: Mouse0: Configuring as mouse
[X] [ 17.376] (II) evdev: Mouse0: Adding scrollwheel support
[X] [ 17.376] (**) evdev: Mouse0: YAxisMapping: buttons 4 and 5
[X] [ 17.376] (**) evdev: Mouse0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[X] [ 17.376] (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE, id 8)
[X] [ 17.376] (II) evdev: Mouse0: initialized for relative axes.
[X] [ 17.376] (**) Mouse0: (accel) keeping acceleration scheme 1
[X] [ 17.376] (**) Mouse0: (accel) acceleration profile 0
[X] [ 17.376] (**) Mouse0: (accel) acceleration factor: 2.000
[X] [ 17.376] (**) Mouse0: (accel) acceleration threshold: 4
[X] [ 17.376] (II) Using input driver 'evdev' for 'Keyboard2'
[X] [ 17.376] (**) Option "SendCoreEvents" "on"
[X] [ 17.376] (**) Keyboard2: always reports core events
[X] [ 17.376] (**) evdev: Keyboard2: Device: "/dev/input/event1"
[X] [ 17.376] (--) evdev: Keyboard2: Vendor 0 Product 0x1
[X] [ 17.376] (--) evdev: Keyboard2: Found keys
[X] [ 17.376] (II) evdev: Keyboard2: Configuring as keyboard
[X] [ 17.376] (II) XINPUT: Adding extended input device "Keyboard2" (type: KEYBOARD, id 9)
[X] [ 17.376] (**) Option "xkb_rules" "evdev"
[X] [ 17.376] (**) Option "xkb_model" "pc104"
[X] [ 17.376] (**) Option "xkb_layout" "us,ru"
[X] [ 17.376] (**) Option "xkb_options" "grp:ctrl_shift_toggle"
[X] [ 17.376] (II) Using input driver 'evdev' for 'Keyboard3'
[X] [ 17.376] (**) Option "SendCoreEvents" "on"
[X] [ 17.376] (**) Keyboard3: always reports core events
[X] [ 17.377] (**) evdev: Keyboard3: Device: "/dev/input/event0"
[X] [ 17.377] (--) evdev: Keyboard3: Vendor 0 Product 0x1
[X] [ 17.377] (--) evdev: Keyboard3: Found keys
[X] [ 17.377] (II) evdev: Keyboard3: Configuring as keyboard
[X] [ 17.377] (II) XINPUT: Adding extended input device "Keyboard3" (type: KEYBOARD, id 10)
[X] [ 17.377] (**) Option "xkb_rules" "evdev"
[X] [ 17.377] (**) Option "xkb_model" "pc104"
[X] [ 17.377] (**) Option "xkb_layout" "us,ru"
[X] [ 17.377] (**) Option "xkb_options" "grp:ctrl_shift_toggle"
[X] [ 17.377] (II) Using input driver 'evdev' for 'Keyboard0'
[X] [ 17.377] (**) Option "SendCoreEvents" "on"
[X] [ 17.377] (**) Option "CorePointer" "on"
[X] [ 17.377] (**) Keyboard0: always reports core events
[X] [ 17.377] (**) evdev: Keyboard0: Device: "/dev/input/event5"
[X] [ 17.377] (WW) evdev: Keyboard0: device file is duplicate. Ignoring.
[X] [ 17.384] (EE) PreInit returned 8 for "Keyboard0"
[X] [ 17.384] (II) UnloadModule: "evdev"
[X] [ 17.384] (II) LoadModule: "kbd"
[X] [ 17.384] (WW) Warning, couldn't open module kbd
[X] [ 17.384] (II) UnloadModule: "kbd"
[X] [ 17.384] (II) Unloading kbd
[X] [ 17.384] (EE) Failed to load module "kbd" (module does not exist, 0)
[X] [ 17.384] (EE) No input driver matching `kbd'
[X] [ 17.438] (II) intel(0): EDID vendor "GSM", prod id 19465
[X] [ 17.438] (II) intel(0): Using hsync ranges from config file
[X] [ 17.438] (II) intel(0): Using vrefresh ranges from config file
[X] [ 17.438] (II) intel(0): Printing DDC gathered Modelines:
[X] [ 17.438] (II) intel(0): Modeline "1366x768"x0.0 85.50 1366 1436 1579 1792 768 771 774 798 +hsync +vsync (47.7 kHz eP)
[X] [ 17.438] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[X] [ 17.438] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[X] [ 17.438] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[X] [ 17.438] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[X] [ 17.438] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[X] [ 17.438] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[X] [ 17.438] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[X] [ 17.438] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[X] [ 17.438] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[X] [ 17.438] (II) intel(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[gm] Disable DPMS.
[gm] Allocate 40960 bytes of shared memory for X imgbuf.
[gm] Allocate 1999872 bytes of shared memory for X imgbuf.
[gm] TFTP: download and unpack file last\packages\scan from 192.168.20.5.
[gm] TFTP: download and unpack file last\packages\alsa from 192.168.20.5.
[KERNEL] [ 18.412651] zram: Initialization done!
[KERNEL] [ 18.413035] Adding 902356k swap on /dev/zram0. Priority:-1 extents:1 across:902356k SS
[gm] TFTP: download and unpack file last\packages\alsalib from 192.168.20.5.
[gm] TFTP: download and unpack file last\packages\alsalib6 from 192.168.20.5.
[gm] modprobe snd-hda-codec-analog.
[gm] modprobe snd-hda-codec-ca0110.
[gm] modprobe snd-hda-codec-ca0132.
[gm] modprobe snd-hda-codec-cirrus.
[gm] modprobe snd-hda-codec-cmedia.
[gm] modprobe snd-hda-codec-conexant.
[gm] modprobe snd-hda-codec-generic.
[gm] modprobe snd-hda-codec-hdmi.
[gm] modprobe snd-hda-codec-idt.
[gm] modprobe snd-hda-codec-realtek.
[gm] modprobe snd-hda-codec-via.
[gm] modprobe snd-hda-intel.
[gm] modprobe snd-usb-audio.
[KERNEL] [ 19.172077] usbcore: registered new interface driver snd-usb-audio
/--- FILE "/proc/asound/devices" -----------------------
| 2: [ 0- 2]: digital audio capture
| 3: [ 0- 1]: digital audio playback
| 4: [ 0- 0]: digital audio playback
| 5: [ 0- 0]: digital audio capture
| 6: [ 0] : control
| 33: : timer
\----------------------------------------------------
[pfac] Got command line /sbin/rdpsnd sndvol 100 100 50.
[gm] /dev/snd/controlC0 character device.
[pfac] Ok, PID 587.
[gm] /dev/snd/pcmC0D0c character device.
[gm] /dev/snd/pcmC0D0p character device.
[gm] /dev/snd/pcmC0D1p character device.
[gm] /dev/snd/pcmC0D2c character device.
[gm] /dev/snd/timer character device.
[gm] Preconfigure ALSA.
[gm] TFTP: download and unpack file last\packages\chrome from 192.168.20.5.
[sndvol] Card 'Intel'/'HDA Intel at 0xfeaf8000 irq 21'.
[sndvol] Mixer name: 'Realtek ALC887'.
[sndvol] Components: 'HDA:10ec0887,104383bc,00100202'.
[sndvol] Controls: 44.
[sndvol] ALSA: control 'Channel Mode'.
[sndvol] ALSA: control 'Front Playback Volume'.
[sndvol] ALSA: control 'Front Playback Switch'.
[sndvol] ALSA: control 'Surround Playback Volume'.
[sndvol] ALSA: control 'Surround Playback Switch'.
[sndvol] ALSA: control 'Center Playback Volume'.
[sndvol] ALSA: control 'LFE Playback Volume'.
[sndvol] ALSA: control 'Center Playback Switch'.
[sndvol] ALSA: control 'LFE Playback Switch'.
[sndvol] ALSA: control 'Headphone Playback Volume'.
[sndvol] ALSA: control 'Headphone Playback Switch'.
[sndvol] ALSA: control 'Front Mic Playback Volume'.
[sndvol] ALSA: control 'Front Mic Playback Switch'.
[sndvol] ALSA: control 'Rear Mic Playback Volume'.
[sndvol] ALSA: control 'Rear Mic Playback Switch'.
[sndvol] ALSA: control 'Line Playback Volume'.
[sndvol] ALSA: control 'Line Playback Switch'.
[sndvol] ALSA: control 'Auto-Mute Mode'.
[sndvol] ALSA: control 'Input Source'.
[sndvol] ALSA: control 'Input Source'.
[sndvol] ALSA: control 'Capture Volume'.
[sndvol] ALSA: control 'Capture Switch'.
[sndvol] ALSA: control 'Capture Volume'.
[sndvol] ALSA: control 'Capture Switch'.
[sndvol] ALSA: control 'Front Mic Boost Volume'.
[sndvol] ALSA: control 'Rear Mic Boost Volume'.
[sndvol] ALSA: control 'Line Boost Volume'.
[sndvol] ALSA: control 'IEC958 Playback Con Mask'.
[sndvol] ALSA: control 'IEC958 Playback Pro Mask'.
[sndvol] ALSA: control 'IEC958 Playback Default'.
[sndvol] ALSA: control 'IEC958 Playback Switch'.
[sndvol] ALSA: control 'IEC958 Default PCM Playback Switch'.
[sndvol] ALSA: control 'Master Playback Volume'.
[sndvol] ALSA: control 'Master Playback Switch'.
[sndvol] ALSA: control 'Front Mic Jack'.
[sndvol] ALSA: control 'Rear Mic Jack'.
[sndvol] ALSA: control 'Line Jack'.
[sndvol] ALSA: control 'Line Out Jack'.
[sndvol] ALSA: control 'Front Headphone Jack'.
[sndvol] ALSA: control 'SPDIF Phantom Jack'.
[sndvol] ALSA: control 'Playback Channel Map'.
[sndvol] ALSA: control 'Capture Channel Map'.
[sndvol] ALSA: control 'Playback Channel Map'.
[sndvol] ALSA: control 'Capture Channel Map'.
[pfac] Process pid 587 terminated, status 00000000.
[gm] TFTP: download file last\packages\chprf.zip from 192.168.20.5.
[pfac] Got command line /sbin/resolver 0x9c290f0 dns [192.168.1.1].
[pfac] Ok, PID 588.
[gm] Everyone can control terminal by VNC.
[gm] VNC listener at port 5900.
[gm] Allocate 1999872 bytes of shared memory for X imgbuf.
[pfac] Process pid 588 terminated, status 00000000.
[pfac] Got command line /sbin/resolver 0x9c36140 dns [192.168.20.10].
[pfac] Ok, PID 589.
[gm] Allocate 1999872 bytes of shared memory for X imgbuf.
[pfac] Process pid 589 terminated, status 00000000.
[pfac] Got command line /opt/google/chrome/chrome --user-data-dir=/tmp/chrome02 --disable-ipv6 --disable-gpu --no-default-browser-check --disk-cache-size=20000000 https://www.google.ru/.
[pfac] Ok, PID 592.
[gm] 192.168.1.1 => 192.168.1.1.
[gm] Free ram before fork terminal client /sbin/rdpclient (session 1): 566672 Kb.
[pfac] Got command line /sbin/rdpclient 1.
[pfac] Ok, PID 603.
[rdpclient 603] RDP Terminal Client, WTware v.5.2.41, pipe 1, pid 603.
[gm] 192.168.20.10 => 192.168.20.10.
[gm] Free ram before fork terminal client /sbin/rdpclient (session 2): 566540 Kb.
[pfac] Got command line /sbin/rdpclient 2.
[pfac] Ok, PID 604.
[rdpclient 603] Make RDP session with 192.168.1.1, port 3389.
[rdpclient 603] Username: "aa.kanaev".
[rdpclient 603] No password.
[rdpclient 603] No PIN.
[rdpclient 603] Domain: "AELITA".
[rdpclient 603] No shell.
[rdpclient 603] No directory.
[rdpclient 603] Window: 1302x768@16.
[rdpclient 603] PFlags 0x0000002F.
[rdpclient 603] Keyboard 00000409:00000000.
[rdpclient 603] My hostname "aa.kanaev".
[rdpclient 603] TCP: connecting to 192.168.1.1:3389.
[rdpclient 604] RDP Terminal Client, WTware v.5.2.41, pipe 2, pid 604.
[gm] Allocate 94464 bytes of shared memory for X imgbuf.
[rdpclient 604] Make RDP session with 192.168.20.10, port 3389.
[rdpclient 604] Username: "aa.kanaev".
[rdpclient 604] No password.
[rdpclient 604] No PIN.
[rdpclient 604] Domain: "AELITA".
[rdpclient 604] No shell.
[rdpclient 604] No directory.
[rdpclient 604] Window: 1302x768@16.
[rdpclient 604] PFlags 0x0000002E.
[rdpclient 604] Keyboard 00000409:00000000.
[rdpclient 604] My hostname "aa.kanaev".
[rdpclient 604] TCP: connecting to 192.168.20.10:3389.
[rdpclient 604] TCP: connection with 192.168.20.10:3389 established.
[rdpclient 604] Turn keepalive on.
[rdpclient 604] Free ram after buffers allocation: 562316 KB.
[rdpclient 603] TCP: connection with 192.168.1.1:3389 established.
[rdpclient 603] Turn keepalive on.
[rdpclient 603] Free ram after buffers allocation: 558968 KB.
[rdpclient 604] Process RDP server certificate.
[rdpclient 604] RDP5 encryption (X.509).
[rdpclient 603] Process RDP server certificate.
[rdpclient 603] RDP5 encryption (X.509).
[X02] (chrome:592): IBUS-WARNING **: Unable to load /var/lib/dbus/machine-id: Failed to open file '/var/lib/dbus/machine-id': No such file or directory
[gm] Bind window 0x00600001 to the screen 3.
[rdpclient 604] LOGON_EX_LOGONERRORS 0xfffffffe 0x0000000f.
[rdpclient 604] SessionId 0x0000000f: AELITA\aa.kanaev.
saned started, PID 636.
[SYSLOG] <31>Sep 4 14:14:10 saned[636]: read_config: searching for config file

[SYSLOG] <31>Sep 4 14:14:10 saned[636]: [sanei_debug] Setting debug level of sanei_config to 128.

[SYSLOG] <31>Sep 4 14:14:10 saned[636]: [sanei_config] sanei_config_get_paths: using config directories .:/usr/local/etc/sane.d

[SYSLOG] <31>Sep 4 14:14:10 saned[636]: [sanei_config] sanei_config_open: attempting to open `./saned.conf'

[SYSLOG] <31>Sep 4 14:14:10 saned[636]: [sanei_config] sanei_config_open: attempting to open `/usr/local/etc/sane.d/saned.conf'

[SYSLOG] <31>Sep 4 14:14:10 saned[636]: [sanei_config] sanei_config_open: using file `/usr/local/etc/sane.d/saned.conf'

[SYSLOG] <31>Sep 4 14:14:10 saned[636]: read_config: done reading config

[SYSLOG] <31>Sep 4 14:14:10 saned[636]: [sanei_debug] Setting debug level of sanei_wire to 128.

[SYSLOG] <31>Sep 4 14:14:10 saned[636]: [sanei_wire] sanei_w_init: initializing

[SYSLOG] <31>Sep 4 14:14:10 saned[636]: [sanei_wire] sanei_w_init: initializing codec

[SYSLOG] <31>Sep 4 14:14:10 saned[636]: [sanei_wire] sanei_w_init: done

[SYSLOG] <31>Sep 4 14:14:10 saned[636]: saned (IPv4 only) from sane-backends 1.0.25git starting up

[SYSLOG] <31>Sep 4 14:14:10 saned[636]: handle_connection: processing client connection

[SYSLOG] <31>Sep 4 14:14:10 saned[636]: check_host: access by remote host: 192.168.20.10

[SYSLOG] <31>Sep 4 14:14:10 saned[636]: check_host: remote host is not IN_LOOPBACK

[SYSLOG] <31>Sep 4 14:14:10 saned[636]: check_host: local hostname: aa.kanaev

[SYSLOG] <31>Sep 4 14:14:10 saned[636]: check_host: local hostname (from DNS): aa.kanaev

[SYSLOG] <31>Sep 4 14:14:10 saned[636]: check_host: local host address (from DNS): 127.0.0.1

[SYSLOG] <31>Sep 4 14:14:10 saned[636]: check_host: remote host doesn't have same addr as local

[SYSLOG] <31>Sep 4 14:14:10 saned[636]: check_host: opening config file: /etc/hosts.equiv

[SYSLOG] <31>Sep 4 14:14:10 saned[636]: check_host: can't open config file: /etc/hosts.equiv (No such file or directory)

[SYSLOG] <31>Sep 4 14:14:10 saned[636]: check_host: opening config file: saned.conf

[SYSLOG] <31>Sep 4 14:14:10 saned[636]: check_host: config file line: `+'

[SYSLOG] <31>Sep 4 14:14:10 saned[636]: check_host: access accepted from any host (`+')

[SYSLOG] <31>Sep 4 14:14:10 saned[636]: init: access granted

[SYSLOG] <31>Sep 4 14:14:10 saned[636]: init: access granted to PCUSER@192.168.20.10

[SYSLOG] <31>Sep 4 14:14:10 saned[636]: process_request: waiting for request

[SYSLOG] <31>Sep 4 14:14:10 saned[636]: process_request: got request 1

[SYSLOG] <31>Sep 4 14:14:10 saned[636]: process_request: waiting for request

[SYSLOG] <31>Sep 4 14:14:10 saned[636]: process_request: got request 2

[SYSLOG] <31>Sep 4 14:14:10 saned[636]: process_request: access to resource `pixma' granted

[SYSLOG] <31>Sep 4 14:14:11 saned[636]: process_request: sane_open returned: Success

[SYSLOG] <31>Sep 4 14:14:11 saned[636]: process_request: waiting for request

[SYSLOG] <31>Sep 4 14:14:11 saned[636]: process_request: got request 6

[SYSLOG] <31>Sep 4 14:14:11 saned[636]: process_request: waiting for request

[SYSLOG] <31>Sep 4 14:14:11 saned[636]: process_request: got request 4

[SYSLOG] <31>Sep 4 14:14:11 saned[636]: process_request: waiting for request

[SYSLOG] <31>Sep 4 14:14:11 saned[636]: process_request: got request 5

[SYSLOG] <31>Sep 4 14:14:11 saned[636]: process_request: waiting for request

[SYSLOG] <31>Sep 4 14:14:11 saned[636]: process_request: got request 5

[SYSLOG] <31>Sep 4 14:14:11 saned[636]: process_request: waiting for request

[SYSLOG] <31>Sep 4 14:14:11 saned[636]: process_request: got request 6

[SYSLOG] <31>Sep 4 14:14:11 saned[636]: process_request: waiting for request

[SYSLOG] <31>Sep 4 14:14:11 saned[636]: process_request: got request 5

[SYSLOG] <31>Sep 4 14:14:11 saned[636]: process_request: waiting for request

[SYSLOG] <31>Sep 4 14:14:11 saned[636]: process_request: got request 5

[SYSLOG] <31>Sep 4 14:14:11 saned[636]: process_request: waiting for request

[SYSLOG] <31>Sep 4 14:14:11 saned[636]: process_request: got request 5

[SYSLOG] <31>Sep 4 14:14:11 saned[636]: process_request: waiting for request

[SYSLOG] <31>Sep 4 14:14:11 saned[636]: process_request: got request 5

[SYSLOG] <31>Sep 4 14:14:11 saned[636]: process_request: waiting for request

[SYSLOG] <31>Sep 4 14:14:11 saned[636]: process_request: got request 5

[SYSLOG] <31>Sep 4 14:14:11 saned[636]: process_request: waiting for request

[SYSLOG] <31>Sep 4 14:14:11 saned[636]: process_request: got request 5

[SYSLOG] <31>Sep 4 14:14:11 saned[636]: process_request: waiting for request

[SYSLOG] <31>Sep 4 14:14:11 saned[636]: process_request: got request 5

[SYSLOG] <31>Sep 4 14:14:11 saned[636]: process_request: waiting for request

[SYSLOG] <31>Sep 4 14:14:11 saned[636]: process_request: got request 5

[SYSLOG] <31>Sep 4 14:14:12 saned[636]: process_request: waiting for request

[SYSLOG] <31>Sep 4 14:14:12 saned[636]: process_request: got request 5

[SYSLOG] <31>Sep 4 14:14:12 saned[636]: process_request: waiting for request

[SYSLOG] <31>Sep 4 14:14:12 saned[636]: process_request: got request 5

[rdpclient 603] Receive Disconnect Provider Ultimatum.
[gm] TSClient gracefully end.
[pfac] Process pid 603 terminated, status 00000000.
[rdpclient 603] Caught signal SIGTERM.
[pfac] Got command line /sbin/resolver 0x9c290f0 dns [192.168.1.1].
[pfac] Ok, PID 638.
[gm] 192.168.1.1 => 192.168.1.1.
[gm] Free ram before fork terminal client /sbin/rdpclient (session 3): 533864 Kb.
[pfac] Got command line /sbin/rdpclient 3.
[pfac] Ok, PID 639.
[pfac] Process pid 638 terminated, status 00000000.
Home   WTware diskless client.