               **************************************************
                      Myson MTD80X Based Fast Ethernet Card
                                 
                Windows NT/2000 PXE Support Installation  Guide
               **************************************************

-----------------------
Installation Procedure 
-----------------------

1. Environment Request:

You should install Windows NT server (4.0 SP3 or later) or Windows 2000.
On the Windows NT or Windows 2000, install TCP/IP and assign a static 
IP address for the server.  Make sure the GUEST account is enabled.

Get PDK package from the Intel web site at 
http://developer.intel.com/ial/WfM/tools/pxepdk20/index.htm.

2. Setup DHCP Service

   Add DHCP service on NETWORK PANEL.

   Start Programs Administrative Tools DHCP Manager to create a page of scope.

3. If PXE service and DHCP server are installed on the same machine, you MUST 
   add this tag to your server.

4. Select NEW PXE Option Tag on DHCP Manager and assign Option 60 to Global.

5. Create the boot files: APITEST.1 and DOSUNDI.1

   a.Create TWO 1.44 DOS format boot disk.

     Disk 1: Label APITEST
     Copy HIMEM.SYS, RAMDRIVE.SYS, MORE.COM and FC.COM to disk 1.

     Disk 2: Label DOSUNDI
     Copy MORE.COM to disk 2.

   b.Change directory to \\PDK\system\images\x86pc\undi\APITest\ and 
     run mktest.bat

   c.Change directory to \\PDK\system\images\x86pc\undi\DOSUNDI\ and 
     run mkdos.bat

6. Configure the proxy DHCP Server.

7. Add Bootserver List.

8. Add type 3 and 65535.

** For details, please refernce the Intel PXE PDK Document. ****

