WTware клиент RDP

Код: Выделить всё

[rdpclient 111] rdpclient-rdpsnd-queue.cpp ( 291): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
[KERNEL] [ 1929.964910] i2c i2c-4: No ack, Maybe slave(addr: 0x64) not exist or abnormal power-on, retry 2...
[KERNEL] [ 1929.965242] i2c i2c-4: No ack, Maybe slave(addr: 0x64) not exist or abnormal power-on, retry 1...
[KERNEL] [ 1929.965564] i2c i2c-4: No ack, Maybe slave(addr: 0x64) not exist or abnormal power-on, retry 0...
[rdpclient 111] SSL_ERROR_SYSCALL
[rdpclient 111] tcp_send failed.
[rdpclient 111] TCP/IP connection lost. Network failure?
[init] Process pid 111 terminated, status 00000000.
[rdpsnd] Link lost.
[rdpclient 111] Caught signal SIGTERM.
[RDP] close kotopipe (n = 0, errno 2).
[gm] Failed to set keyboard leds.
[gm] Final message: TCP/IP connection lost. Network failure?
[gm] /graphic/exlm.png: 44x42.
[init] Run /sbin/resolver 0xc9768 dns [192.168.25.118].
[init] Ok, PID 115.
[init] Process pid 115 terminated, status 00000000.
[gm] 192.168.25.118 => 192.168.25.118.

Код: Выделить всё

WTware v.5.3.2

[init] WTware init v.5.3.2/RK3066 (c) 2003-2015 WTware http://www.wtware.com
[init] Run /sbin/loader.
[init] Ok, PID 70.
[loader] WTware/RK3066 loader v.5.3.2.
[loader] [0] partition 'misc'.
[loader] [1] partition 'kernel'.
[loader] [2] partition 'boot'.
[loader] [3] partition 'recovery'.
[loader] [4] partition 'backup'.
[loader] [5] partition 'cache'.
[loader] [6] partition 'userdata'.
[loader] [7] partition 'metadata'.
[loader] [8] partition 'kpanic'.
[loader] [9] partition 'system'. Store data here.
[loader] [10] partition 'user'.
[loader] Loader version 2.16.
[loader] Video mode looks like 1920x1080.
[loader] dhcp: 369 bytes from 192.168.25.120.
00000000:0000015d0000000000110000c0a81978ffffffff00430044015d000002010600 ...].........x.....C.D.]......
00000020:67458b6b0000000000000000c0a81935c0a81976000000003035a7241c710000 gE.k..........5..v....05.$q..
00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
[loader] dhcp: 369 bytes from 192.168.25.120.
00000000:0000015d0000000000110000c0a81978ffffffff00430044015d000002010600 ...].........x.....C.D.]......
00000020:67458b6b0000000000000000c0a81935c0a81976000000003035a7241c710000 gE.k..........5..v....05.$q..
00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
[loader] dhcp: server address 192.168.25.120.
[loader] dhcp: 192.168.25.53/255.255.255.0.
[loader] dhcp: default gateway 192.168.25.254.
[loader] dhcp: DNS 192.168.25.120.
[loader] dhcp: DNS 192.168.20.1.
[loader] dhcp: domain forum.local.
[loader] dhcp: TFTP 192.168.25.118.
[loader] dhcp: boot file (067) 5.2.38\wtware.pxe.
[loader] TFTP binary "5.2.38\", configs prefix "", using "\" slash.
[init] Run /sbin/kotenok.
[init] Ok, PID 105.
WTware v.5.3.2/RK3066 supervisor.
Send broadcast WTCU discover.
WTC listener is active.
WTC broadcast listener is active.
HTTPd listener is active.
[KERNEL] [ 0.000000] Initializing cgroup subsys cpu
[KERNEL] [ 0.000000] Linux version 3.0.36+ (duanshijun@tena-PowerEdge-R720) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #9 SMP PREEMPT Tue Nov 11 14:26:26 CST 2014
[KERNEL] [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
[KERNEL] [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
[KERNEL] [ 0.000000] Machine: RK30board
[KERNEL] [ 0.000000] ddr size = 1024 M, set ion_reserve_size size to 125829120
[KERNEL] [ 0.000000] memory reserve: Memory(base:0x98800000 size:120M) reserved for 
[KERNEL] [ 0.000000] memory reserve: Memory(base:0x97000000 size:24M) reserved for 
[KERNEL] [ 0.000000] memory reserve: Memory(base:0x96800000 size:8M) reserved for 
[KERNEL] [ 0.000000] memory reserve: Total reserved 152M
[KERNEL] [ 0.000000] Memory policy: ECC disabled, Data cache writeback
[KERNEL] [ 0.000000] bootconsole [earlycon0] enabled
[KERNEL] [ 0.000000] CPU SRAM: copied sram code from c0c5a000 to fef00100 - fef02040
[KERNEL] [ 0.000000] CPU SRAM: copied sram data from c0c5bf40 to fef02040 - fef02970
[KERNEL] [ 0.000000] sram_log: @ 0q @ P 1 / ! aB@ 2 `" 2q : 4q 
[KERNEL] [ 0.000000] CLKDATA_MSG: pll_flag = 0x03
[KERNEL] [ 0.000000] hzb test rmii clk get form clkin
[KERNEL] [ 0.000000] L310 cache controller enabled
[KERNEL] [ 0.000000] l2x0: 16 ways, CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001, Cache size: 524288 B
[KERNEL] [ 0.000000] DDR DEBUG: version 1.00 20131106 
[KERNEL] [ 0.000000] DDR DEBUG: DDR3 Device
[KERNEL] [ 0.000000] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
[KERNEL] [ 0.000000] DDR DEBUG: init success!!! freq=222MHz
[KERNEL] [ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=0 extra clock, DGPS=180
[KERNEL] [ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=0 extra clock, DGPS=180
[KERNEL] [ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=0 extra clock, DGPS=180
[KERNEL] [ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=0 extra clock, DGPS=180
[KERNEL] [ 0.000000] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
[KERNEL] [ 0.000000] DDR DEBUG: DRV Pull-Up=0xb, DRV Pull-Dwn=0xb
[KERNEL] [ 0.000000] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
[KERNEL] [ 0.000000] Boot mode: REBOOT (6) flag: NORMAL (0xc3524200)
[KERNEL] [ 0.000000] On node 0 totalpages: 223232
[KERNEL] [ 0.000000] free_area_init_node: node 0, pgdat c0c58160, node_mem_map c170d000
[KERNEL] [ 0.000000] Normal zone: 976 pages used for memmap
[KERNEL] [ 0.000000] Normal zone: 0 pages reserved
[KERNEL] [ 0.000000] Normal zone: 123952 pages, LIFO batch:31
[KERNEL] [ 0.000000] HighMem zone: 1072 pages used for memmap
[KERNEL] [ 0.000000] HighMem zone: 97232 pages, LIFO batch:31
[KERNEL] [ 0.000000] PERCPU: Embedded 7 pages/cpu @c1f16000 s7040 r8192 d13440 u32768
[KERNEL] [ 0.000000] pcpu-alloc: s7040 r8192 d13440 u32768 alloc=8*4096
[KERNEL] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[KERNEL] [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 221184
[KERNEL] [ 0.000000] Kernel command line: console=ttyFIQ0 androidboot.console=ttyFIQ0 init=/init initrd=0x62000000,0x00790000 mtdparts=rk29xxnand:0x00002000@0x00002000(misc),0x00006000@0x00004000(kernel),0x00006000@0x0000a000(boot),0x00010000@0x00010000(recovery),0x00020000@0x00020000(backup),0x00040000@0x00040000(cache),0x003FC000@0x00080000(userdata),0x00002000@0x0047C000(metadata),0x00002000@0x0047E000(kpanic),0x00180000@0x00480000(system),-@0x00600000(user) bootver=2014-07-22#2.16 firmware_ver=4.4.2
[KERNEL] [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[KERNEL] [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[KERNEL] [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[KERNEL] [ 0.000000] allocated 4194304 bytes of page_cgroup
[KERNEL] [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[KERNEL] [ 0.000000] Memory: 872MB = 872MB total
[KERNEL] [ 0.000000] Memory: 852824k/852824k available, 195752k reserved, 393216K highmem
[KERNEL] [ 0.000000] Virtual kernel memory layout:
[KERNEL] [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[KERNEL] [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[KERNEL] [ 0.000000] DMA : 0xff600000 - 0xffe00000 ( 8 MB)
[KERNEL] [ 0.000000] vmalloc : 0xdf000000 - 0xfe800000 ( 504 MB)
[KERNEL] [ 0.000000] lowmem : 0xc0000000 - 0xde800000 ( 488 MB)
[KERNEL] [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[KERNEL] [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[KERNEL] [ 0.000000] .init : 0xc0408000 - 0xc0436000 ( 184 kB)
[KERNEL] [ 0.000000] .text : 0xc0436000 - 0xc0bd2424 (7794 kB)
[KERNEL] [ 0.000000] .data : 0xc0bd4000 - 0xc0c59fc8 ( 536 kB)
[KERNEL] [ 0.000000] .bss : 0xc0c5d024 - 0xc170c5e8 (10942 kB)
[KERNEL] [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[KERNEL] [ 0.000000] Preemptible hierarchical RCU implementation.
[KERNEL] [ 0.000000] NR_IRQS:352
[KERNEL] [ 0.000000] rk30_gpio_init: 128 gpio irqs in 4 banks
[KERNEL] [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[KERNEL] [ 0.000000] rk_timer: version 1.3
[KERNEL] [ 0.003751] Calibrating delay loop (skipped) preset value.. 1583.48 BogoMIPS (lpj=7917420)
[KERNEL] [ 0.012876] pid_max: default: 32768 minimum: 301
[KERNEL] [ 0.018139] Security Framework initialized
[KERNEL] [ 0.022713] SELinux: Initializing.
[KERNEL] [ 0.026635] SELinux: Starting in permissive mode
[KERNEL] [ 0.026704] Mount-cache hash table entries: 512
[KERNEL] [ 0.032308] Initializing cgroup subsys debug
[KERNEL] [ 0.037081] Initializing cgroup subsys cpuacct
[KERNEL] [ 0.042064] Initializing cgroup subsys memory
[KERNEL] [ 0.046945] Initializing cgroup subsys freezer
[KERNEL] [ 0.051913] CPU: Testing write buffer coherency: ok
[KERNEL] [ 0.138182] CPU1: Booted secondary processor
[KERNEL] [ 0.178172] CPU2: Booted secondary processor
[KERNEL] [ 0.218169] CPU3: Booted secondary processor
[KERNEL] [ 0.218205] Brought up 4 CPUs
[KERNEL] [ 0.235801] SMP: Total of 4 processors activated (6333.93 BogoMIPS).
[KERNEL] [ 0.243221] devtmpfs: initialized
[KERNEL] [ 0.253049] NET: Registered protocol family 16
[KERNEL] [ 0.258132] last_log: 0xde100000 map to 0xdf004000 and copy to 0xc0c611a0 (version 2.1)
[KERNEL] [ 0.283542] DVFS MSG:	AVS Value(index=0): 115 115 115 115 115 115 116 116 115 115 
[KERNEL] [ 0.302490] lcdc0 is used as external display device contoller!
[KERNEL] [ 0.309128] lcdc1 is used as primary display device controller!
[KERNEL] [ 0.415946] rk29sdk_wifi_bt_gpio_control_init: init finished
[KERNEL] [ 0.423624] console [ttyFIQ0] enabled, bootconsole disabled
[KERNEL] [ 0.432806] Registered FIQ tty driver de035cc0
[KERNEL] [ 0.433438] Loaded driver for PL330 DMAC-1 rk29-pl330
[KERNEL] [ 0.433486] DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[KERNEL] [ 0.433674] Loaded driver for PL330 DMAC-2 rk29-pl330
[KERNEL] [ 0.433719] DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14
[KERNEL] [ 0.465498] bio: create slab at 0
[KERNEL] [ 0.469923] SCSI subsystem initialized
[KERNEL] [ 0.470150] usbcore: registered new interface driver usbfs
[KERNEL] [ 0.470269] usbcore: registered new interface driver hub
[KERNEL] [ 0.484505] usbcore: registered new device driver usb
[KERNEL] [ 0.484775] rk30_i2c rk30_i2c.0: i2c-0: RK30 I2C adapter
[KERNEL] [ 0.485032] rk30_i2c rk30_i2c.1: i2c-1: RK30 I2C adapter
[KERNEL] [ 0.485234] rk30_i2c rk30_i2c.2: i2c-2: RK30 I2C adapter
[KERNEL] [ 0.485373] rk30_i2c rk30_i2c.3: i2c-3: RK30 I2C adapter
[KERNEL] [ 0.485657] rk30_i2c rk30_i2c.4: i2c-4: RK30 I2C adapter
[KERNEL] [ 0.516099] rk30-adc rk30-adc: rk30 adc: driver initialized
[KERNEL] [ 0.516209] RK29 Watchdog Timer, (c) 2011 Rockchip Electronics
[KERNEL] [ 0.516433] rk29-wdt rk29-wdt.0: starting watchdog timer
[KERNEL] [ 0.516703] Advanced Linux Sound Architecture Driver Version 1.0.24.
[KERNEL] [ 0.517161] Bluetooth: Core ver 2.16
[KERNEL] [ 0.517248] NET: Registered protocol family 31
[KERNEL] [ 0.517288] Bluetooth: HCI device and connection manager initialized
[KERNEL] [ 0.517345] Bluetooth: HCI socket layer initialized
[KERNEL] [ 0.517394] Bluetooth: L2CAP socket layer initialized
[KERNEL] [ 0.517455] Bluetooth: SCO socket layer initialized
[KERNEL] [ 0.518602] rk fb probe ok!
[KERNEL] [ 0.523388] act8846_set_init,line=17
[KERNEL] [ 0.523423] act8846_set_init:g_pmic_type=3
[KERNEL] [ 0.525127] act8846_set_init act_dcdc1 =1200000mV end
[KERNEL] [ 0.526921] act8846_set_init vdd_core =1000000mV end
[KERNEL] [ 0.528712] act8846_set_init vdd_cpu =1000000mV end
[KERNEL] [ 0.530499] act8846_set_init act_dcdc4 =3300000mV end
[KERNEL] [ 0.531688] act8846_set_init act_ldo1 =1000000mV end
[KERNEL] [ 0.532774] act8846_set_init act_ldo2 =1200000mV end
[KERNEL] [ 0.533861] act8846_set_init act_ldo3 =1800000mV end
[KERNEL] [ 0.534948] act8846_set_init act_ldo4 =3300000mV end
[KERNEL] [ 0.536035] act8846_set_init act_ldo5 =3300000mV end
[KERNEL] [ 0.537120] act8846_set_init act_ldo6 =1800000mV end
[KERNEL] [ 0.538209] act8846_set_init act_ldo7 =1800000mV end
[KERNEL] [ 0.539296] act8846_set_init act_ldo8 =2800000mV end
[KERNEL] [ 0.539348] act8846_set_init,line=78 END
[KERNEL] [ 0.539422] i2c-core: driver [act8846] using legacy suspend method
[KERNEL] [ 0.539473] i2c-core: driver [act8846] using legacy resume method
[KERNEL] [ 0.539563] rk1000_control_probe
[KERNEL] [ 0.564473] rk1000_control_probe ok
[KERNEL] [ 0.564561] Switching to clocksource rk_timer
[KERNEL] [ 0.567563] Switched to NOHz mode on CPU #0
[KERNEL] [ 0.568221] Switched to NOHz mode on CPU #2
[KERNEL] [ 0.568234] Switched to NOHz mode on CPU #1
[KERNEL] [ 0.568248] Switched to NOHz mode on CPU #3
[KERNEL] [ 0.573832] lcdc1:reg_phy_base = 0x1010e000,reg_vir_base:0xdf0ac000
[KERNEL] [ 0.573934] fb0:win0
[KERNEL] [ 0.573939] fb1:win1
[KERNEL] [ 0.573944] fb2:win2
[KERNEL] [ 0.574046] rk3188 lcdc1 clk enable...
[KERNEL] [ 0.599183] rk3188 lcdc1 clk disable...
[KERNEL] [ 0.677244] fb0:phy:97000000>>vir:e0000000>>len:0x1800000
[KERNEL] [ 0.677573] rk_fb_register>>>>>fb0
[KERNEL] [ 0.677925] rk_fb_register>>>>>fb1
[KERNEL] [ 0.678388] rk3188 lcdc1 probe ok!
[KERNEL] [ 0.678465] lcdc0:reg_phy_base = 0x1010c000,reg_vir_base:0xdf0c0000
[KERNEL] [ 0.678540] fb0:win0
[KERNEL] [ 0.678545] fb1:win1
[KERNEL] [ 0.678550] fb2:win2
[KERNEL] [ 0.678646] rk3188 lcdc0 clk enable...
[KERNEL] [ 0.703733] rk3188 lcdc0 clk disable...
[KERNEL] [ 0.703773] fb2:phy:97000000>>vir:e0000000>>len:0x1800000
[KERNEL] [ 0.704011] rk_fb_register>>>>>fb2
[KERNEL] [ 0.704313] rk_fb_register>>>>>fb3
[KERNEL] [ 0.704345] rk3188 lcdc0 probe ok!
[KERNEL] [ 0.754372] cfg80211: Calling CRDA to update world regulatory domain
[KERNEL] [ 0.765365] IT66121 probe success.
[KERNEL] [ 0.768703] emmc emmc: internal_storage is NOT emmc
[KERNEL] [ 0.768924] NET: Registered protocol family 2
[KERNEL] [ 0.769077] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
[KERNEL] [ 0.769444] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[KERNEL] [ 0.770471] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[KERNEL] [ 0.771603] TCP: Hash tables configured (established 65536 bind 65536)
[KERNEL] [ 0.771657] TCP reno registered
[KERNEL] [ 0.771689] UDP hash table entries: 256 (order: 1, 8192 bytes)
[KERNEL] [ 0.771752] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[KERNEL] [ 0.772089] NET: Registered protocol family 1
[KERNEL] [ 0.772307] Unpacking initramfs...
[KERNEL] [ 1.003398] Freeing initrd memory: 7744K
[KERNEL] [ 1.003527] PMU: registered new PMU device of type 0
[KERNEL] [ 1.003686] efuse_version_val: efuse version = 51
[KERNEL] [ 1.003731] DVFS MSG: core: dvfs_adjust_table_lmtvolt get leakage_level = 4000
[KERNEL] [ 1.003790] efuse_version_val: efuse version = 51
[KERNEL] [ 1.003830] DVFS MSG: aclk_gpu: dvfs_adjust_table_lmtvolt get leakage_level = 4000
[KERNEL] [ 1.004711] cpufreq: delete arm freq(1608000)
[KERNEL] [ 1.005084] rk3188 cpufreq version 2.2, suspend freq 816 MHz
[KERNEL] [ 1.005593] vpu: power on
[KERNEL] [ 1.005664] VPU_SERVICE: checking hw id 4831
[KERNEL] [ 1.006144] vpu: power off...done
[KERNEL] [ 1.006216] VPU_SERVICE: init success
[KERNEL] [ 1.006509] audit: initializing netlink socket (disabled)
[KERNEL] [ 1.006589] type=2000 audit(0.940:1): initialized
[KERNEL] [ 1.007112] highmem bounce pool size: 64 pages
[KERNEL] [ 1.007291] ashmem: initialized
[KERNEL] [ 1.011266] ******** Show Sink Info ********
[KERNEL] [ 1.011306] Support video mode: 
[KERNEL] [ 1.011335] 1920x1080p@60Hz.
[KERNEL] [ 1.011362] 1920x1080p@50Hz.
[KERNEL] [ 1.011387] 1280x720p@60Hz.
[KERNEL] [ 1.011412] 1280x720p@50Hz.
[KERNEL] [ 1.011437] Support audio type: LPCM
[KERNEL] [ 1.011467] Support audio sample rate: 
[KERNEL] [ 1.011499] 32000
[KERNEL] [ 1.011517] 44100
[KERNEL] [ 1.011535] 48000
[KERNEL] [ 1.011553] 96000
[KERNEL] [ 1.011571] Support audio word lenght: 
[KERNEL] [ 1.011602] 16bit
[KERNEL] [ 1.011620] 20bit
[KERNEL] [ 1.011638] 24bit
[KERNEL] [ 1.011656] ******** Show Sink Info ********
[KERNEL] [ 1.011717] rk3188 lcdc1 clk enable...
[KERNEL] [ 1.011765] lcdc1: dclk:148500000>>fps:60 
[KERNEL] [ 1.011806] rk30-lcdc rk30-lcdc.1: rk3188_load_screen for lcdc1 ok!
[KERNEL] [ 1.011862] lcdc1 wakeup from standby!
[KERNEL] [ 1.011896] lcdc1 win0 open,atv layer:1
[KERNEL] [ 1.011941] lcdc1 win1 closed,atv layer:1
[KERNEL] [ 1.013867] fuse init (API version 7.16)
[KERNEL] [ 1.014216] SELinux: Registering netfilter hooks
[KERNEL] [ 1.015988] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[KERNEL] [ 1.016061] io scheduler noop registered
[KERNEL] [ 1.016133] io scheduler deadline registered
[KERNEL] [ 1.016229] io scheduler cfq registered (default)
[KERNEL] [ 1.024100] rga: Driver loaded succesfully
[KERNEL] [ 1.024278] rk3188 lcdc0 clk enable...
[KERNEL] [ 1.024324] lcdc0: dclk:148500000>>fps:60 
[KERNEL] [ 1.024364] rk30-lcdc rk30-lcdc.0: rk3188_load_screen for lcdc0 ok!
[KERNEL] [ 1.024872] rk1000_tv ver 2.0 probe ok
[KERNEL] [ 1.025212] rk_serial.c v1.6 2013-12-23
[KERNEL] [ 1.025481] rk_serial.0: ttyS0 at MMIO 0x10124000 (irq = 66) is a rk29_serial.0
[KERNEL] [ 1.025685] rk_serial rk_serial.0: membase 0xdf0c8000
[KERNEL] [ 1.025763] rk_serial.3: ttyS3 at MMIO 0x20068000 (irq = 69) is a rk29_serial.3
[KERNEL] [ 1.025956] rk_serial rk_serial.3: membase 0xdf0d0000
[KERNEL] [ 1.026244] Rockchip ion module(version: 1.0) is successfully loaded
[KERNEL] [ 1.028930] loop: module loaded
[KERNEL] [ 1.028995] Android kernel panic handler initialized (bind=kpanic)
[KERNEL] [ 1.029833] Read the Ethernet MAC address from IDB:00:00:00:00:00:00
[KERNEL] [ 1.029897] random_ether_addr***********:12:83:B8:CE:B7:2
[KERNEL] [ 1.030191] rk29 vmac rk29 vmac.0: ARC VMAC at 0x10204000 irq 51 12:83:b8:ce:b7:02
[KERNEL] [ 1.030308] PPP generic driver version 2.4.2
[KERNEL] [ 1.030483] PPP Deflate Compression module registered
[KERNEL] [ 1.030521] PPP BSD Compression module registered
[KERNEL] [ 1.031156] PPP MPPE Compression module registered
[KERNEL] [ 1.031195] NET: Registered protocol family 24
[KERNEL] [ 1.031310] usbcore: registered new interface driver asix
[KERNEL] [ 1.031381] usbcore: registered new interface driver cdc_ether
[KERNEL] [ 1.031441] usbcore: registered new interface driver dm9620
[KERNEL] [ 1.031505] usbcore: registered new interface driver SR9700_android
[KERNEL] [ 1.031580] usbcore: registered new interface driver CoreChips
[KERNEL] [ 1.031641] usbcore: registered new interface driver net1080
[KERNEL] [ 1.031702] usbcore: registered new interface driver cdc_subset
[KERNEL] [ 1.031761] usbcore: registered new interface driver zaurus
[KERNEL] [ 1.031808] cdc_ncm: 04-Aug-2011
[KERNEL] [ 1.031854] usbcore: registered new interface driver cdc_ncm
[KERNEL] [ 1.031892] Rockchip WiFi SYS interface (V1.00) ... 
[KERNEL] [ 1.031956] Initializing USB Mass Storage driver...
[KERNEL] [ 1.032017] usbcore: registered new interface driver usb-storage
[KERNEL] [ 1.032058] USB Mass Storage support registered.
[KERNEL] [ 1.032174] usbcore: registered new interface driver usbserial
[KERNEL] [ 1.032245] USB Serial support registered for generic
[KERNEL] [ 1.032306] usbcore: registered new interface driver usbserial_generic
[KERNEL] [ 1.032353] usbserial: USB Serial Driver core
[KERNEL] [ 1.032403] USB Serial support registered for GSM modem (1-port)
[KERNEL] [ 1.032469] usbcore: registered new interface driver option
[KERNEL] [ 1.032508] option: v0.7.2:USB Driver for GSM modems
[KERNEL] [ 1.032560] USB Serial support registered for usi-modem
[KERNEL] [ 1.032619] usbcore: registered new interface driver usi-modem
[KERNEL] [ 1.244090] DWC_OTG: ^^^^^^^^^^^^^^^^^Device Mode
[KERNEL] [ 1.244139] usb20_otg usb20_otg: DWC OTG Controller
[KERNEL] [ 1.244287] usb20_otg usb20_otg: new USB bus registered, assigned bus number 1
[KERNEL] [ 1.244371] usb20_otg usb20_otg: irq 48, io mem 0x00000000
[KERNEL] [ 1.244409] DWC_OTG: dwc_otg_hcd_start controller in device mode,everest
[KERNEL] [ 1.244496] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[KERNEL] [ 1.244545] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[KERNEL] [ 1.244595] usb usb1: Product: DWC OTG Controller
[KERNEL] [ 1.244653] usb usb1: Manufacturer: Linux 3.0.36+ dwc_otg_hcd
[KERNEL] [ 1.244694] usb usb1: SerialNumber: usb20_otg
[KERNEL] [ 1.245044] hub 1-0:1.0: USB hub found
[KERNEL] [ 1.245079] hub 1-0:1.0: 1 port detected
[KERNEL] [ 1.247693] DWC_OTG: host20_driver_probe host2.0 reg addr: 0x101c0000 remap:0xdf180000
[KERNEL] [ 1.458018] DWC_OTG: ^^^^^^^^^^^^^^^^^^Host Mode
[KERNEL] [ 1.458063] usb20_host usb20_host: DWC OTG Controller
[KERNEL] [ 1.458131] usb20_host usb20_host: new USB bus registered, assigned bus number 2
[KERNEL] [ 1.458199] usb20_host usb20_host: irq 49, io mem 0x00000000
[KERNEL] [ 1.458276] DWC_OTG: Init: Port Power? op_state=1
[KERNEL] [ 1.458310] DWC_OTG: Init: Power Port (0)
[KERNEL] [ 1.458371] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[KERNEL] [ 1.458419] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[KERNEL] [ 1.458469] usb usb2: Product: DWC OTG Controller
[KERNEL] [ 1.458505] usb usb2: Manufacturer: Linux 3.0.36+ host20_hcd
[KERNEL] [ 1.458544] usb usb2: SerialNumber: usb20_host
[KERNEL] [ 1.458851] hub 2-0:1.0: USB hub found
[KERNEL] [ 1.458889] hub 2-0:1.0: 1 port detected
[KERNEL] [ 1.460033] android_usb gadget: Mass Storage Function, version: 2009/09/11
[KERNEL] [ 1.460085] android_usb gadget: Number of LUNs=2
[KERNEL] [ 1.460119] lun0: LUN: removable file: (no medium)
[KERNEL] [ 1.460156] lun1: LUN: removable file: (no medium)
[KERNEL] [ 1.460390] android_usb gadget: android_usb ready
[KERNEL] [ 1.460602] input: rk29-keypad as /devices/platform/rk29-keypad/input/input0
[KERNEL] [ 1.460853] usbcore: registered new interface driver xpad
[KERNEL] [ 1.461054] ===================================================
[KERNEL] [ 1.461096] Rockchip IR remote controller driver. Version 1.0.0
[KERNEL] [ 1.461135] ===================================================
[KERNEL] [ 1.461178] ++++++++remotectl_init
[KERNEL] [ 1.461216] ++++++++remotectl_probe
[KERNEL] [ 1.461260] remotectl probe j=0x0
[KERNEL] [ 1.461372] input: rkxx-remotectl as /devices/platform/rkxx-remotectl/input/input1
[KERNEL] [ 1.465823] using rtc device, rtc_hym8563, for alarms
[KERNEL] [ 1.465885] rtc_hym8563 1-0051: rtc core: registered rtc_hym8563 as rtc0
[KERNEL] [ 1.465963] i2c /dev entries driver
[KERNEL] [ 1.466445] lirc_dev: IR Remote Control driver registered, major 250 
[KERNEL] [ 1.466491] IR NEC protocol handler initialized
[KERNEL] [ 1.466523] IR RC5(x) protocol handler initialized
[KERNEL] [ 1.466558] IR RC6 protocol handler initialized
[KERNEL] [ 1.466592] IR JVC protocol handler initialized
[KERNEL] [ 1.466623] IR Sony protocol handler initialized
[KERNEL] [ 1.466655] IR RC5 (streamzap) protocol handler initialized
[KERNEL] [ 1.466695] IR LIRC bridge handler initialized
[KERNEL] [ 1.466726] Linux video capture interface: v2.00
[KERNEL] [ 1.466916] usbcore: registered new interface driver uvcvideo
[KERNEL] [ 1.466958] USB Video Class driver (v1.1.0)
[KERNEL] [ 1.467015] def_ref_volt: 1800mV, curr_ref_volt: 1800mV
[KERNEL] [ 1.467352] device-mapper: uevent: version 1.0.3
[KERNEL] [ 1.467583] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[KERNEL] [ 1.467781] rtk_btusb: Realtek Bluetooth USB driver module init, version 2.16
[KERNEL] [ 1.467832] rtk_btusb: Register usb char device interface for BT driver
[KERNEL] [ 1.468002] usbcore: registered new interface driver rtk_btusb
[KERNEL] [ 1.468084] cpuidle: using governor ladder
[KERNEL] [ 1.468115] cpuidle: using governor menu
[KERNEL] [ 1.513549] 
[KERNEL] [ 1.513553] drivers/mmc/core/core.c...2019.. ===== mmc_rescan Begin....[mmc0]
[KERNEL] [ 1.513612] 
[KERNEL] [ 1.513615] =================
[KERNEL] [ 1.513619] sdmmc_rescan..2026.. ====find no SDMMC host. [mmc0]
[KERNEL] [ 1.513710] .Line4018..The End of SDMMC-probe Ver.6.07 The last modify date is 2013-12-20. [sd_mmc]
[KERNEL] [ 1.513929] 
[KERNEL] [ 1.513933] drivers/mmc/core/core.c...2019.. ===== mmc_rescan Begin....[mmc1]
[KERNEL] [ 1.514001] .Line4018..The End of SDMMC-probe Ver.6.07 The last modify date is 2013-12-20. [sdio]
[KERNEL] [ 1.514151] Registered led device: it66121
[KERNEL] [ 1.514200] Registered led device: cvbs
[KERNEL] [ 1.515556] usbcore: registered new interface driver usbhid
[KERNEL] [ 1.515599] usbhid: USB HID core driver
[KERNEL] [ 1.515970] logger: created 256K log 'log_main'
[KERNEL] [ 1.516056] logger: created 256K log 'log_events'
[KERNEL] [ 1.516144] logger: created 256K log 'log_radio'
[KERNEL] [ 1.516225] logger: created 256K log 'log_system'
[KERNEL] [ 1.516570] zram: Created 1 device(s) ...
[KERNEL] [ 1.517062] i2c-core: driver [RK1000_CODEC] using legacy suspend method
[KERNEL] [ 1.517113] i2c-core: driver [RK1000_CODEC] using legacy resume method
[KERNEL] [ 1.537416] rk29_sdmmc_change_clk_div..1684.. newDiv=42, newCLK=294Khz [sdio]
[KERNEL] [ 1.671569] register rk1000 codec earlysuspend ok
[KERNEL] [ 1.671611] RK1000_CODEC 4-0060: Failed to add route Left DAC->Left Mixer
[KERNEL] [ 1.678208] asoc: rk1000_codec <-> rk29_i2s.1 mapping ok
[KERNEL] [ 1.678586] ALSA device list:
[KERNEL] [ 1.678608] #0: RK29_RK1000
[KERNEL] [ 1.678731] GACT probability NOT on
[KERNEL] [ 1.678762] Mirror/redirect action on
[KERNEL] [ 1.678788] u32 classifier
[KERNEL] [ 1.678806] Actions configured
[KERNEL] [ 1.678831] Netfilter messages via NETLINK v0.30.
[KERNEL] [ 1.678902] nf_conntrack version 0.5.0 (13446 buckets, 53784 max)
[KERNEL] [ 1.679260] ctnetlink v0.93: registering with nfnetlink.
[KERNEL] [ 1.679328] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[KERNEL] [ 1.679376] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[KERNEL] [ 1.679700] xt_time: kernel timezone is -0000
[KERNEL] [ 1.679886] ip_tables: (C) 2000-2006 Netfilter Core Team
[KERNEL] [ 1.680051] arp_tables: (C) 2002 David S. Miller
[KERNEL] [ 1.680121] TCP cubic registered
[KERNEL] [ 1.680147] Initializing XFRM netlink socket
[KERNEL] [ 1.680522] NET: Registered protocol family 10
[KERNEL] [ 1.681210] Mobile IPv6
[KERNEL] [ 1.681254] ip6_tables: (C) 2000-2006 Netfilter Core Team
[KERNEL] [ 1.681385] IPv6 over IPv4 tunneling driver
[KERNEL] [ 1.682003] NET: Registered protocol family 17
[KERNEL] [ 1.682057] NET: Registered protocol family 15
[KERNEL] [ 1.682343] Bluetooth: RFCOMM TTY layer initialized
[KERNEL] [ 1.682409] Bluetooth: RFCOMM socket layer initialized
[KERNEL] [ 1.682447] Bluetooth: RFCOMM ver 1.11
[KERNEL] [ 1.682476] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[KERNEL] [ 1.682515] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[KERNEL] [ 1.682668] NET: Registered protocol family 35
[KERNEL] [ 1.682859] [BT_RFKILL]: Enter rfkill_rk_init
[KERNEL] [ 1.682979] [BT_RFKILL]: Request irq for bt wakeup host
[KERNEL] [ 1.683032] [BT_RFKILL]: ** disable irq
[KERNEL] [ 1.704644] [BT_RFKILL]: bt shut off power
[KERNEL] [ 1.734642] [BT_RFKILL]: bt_default device registered.
[KERNEL] [ 1.734734] pmic set pm_suspend_volt:
[KERNEL] [ 1.734898] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[KERNEL] [ 1.734953] rk_cam_cif(3329):rk3066b-camera version: v0.3.21 Zoom by ipp
[KERNEL] [ 1.735073] Registering SWP/SWPB emulation handler
[KERNEL] [ 1.735601] ddrfreq: verion 3.2 20131126
[KERNEL] [ 1.735634] ddrfreq: fix cpu pause bug
[KERNEL] [ 1.735667] ddrfreq: normal 456MHz video 0MHz video_low 0MHz dualview 0MHz idle 0MHz suspend 198MHz reboot 222MHz
[KERNEL] [ 1.736523] ddrfreq: change freq to 445 MHz when normal
[KERNEL] [ 1.737357] ret: 0
[KERNEL] [ 1.737381] rtc_hym8563 1-0051: setting system clock to 2011-01-01 12:07:15 UTC (1293883635)
[KERNEL] [ 1.739959] asoc: dit-hifi <-> rk-spdif mapping ok
[KERNEL] [ 1.740379] usbcore: registered new interface driver snd-usb-audio
[KERNEL] [ 1.740505] Freeing init memory: 184K
[KERNEL] [ 1.764702] ret: 0
[KERNEL] [ 1.804989] ret: 0
[KERNEL] [ 1.821962] gp_rknand_info = : 0xdd8d0400
[KERNEL] [ 1.822045] rk30_chip_set:1 
[KERNEL] [ 1.822112] FtlInit!
[KERNEL] [ 1.822139] No.1 FLASH ID:98 de 84 93 72 57
[KERNEL] [ 1.824991] FTL version: 5.0.12 20140214
[KERNEL] [ 1.834730] camera 33-0-ov5640_back_3: Probe ov5640_back_3 failed
[KERNEL] [ 1.834838] ret: 0
[KERNEL] [ 1.844659] usb 2-1: new high speed USB device number 2 using usb20_host
[KERNEL] [ 1.864673] ret: 0
[KERNEL] [ 1.884553] no layer of lcdc1 is used,go to standby!
[KERNEL] [ 1.904932] min_w = 800,min_h = 600 ,max_real_w = 1600,max_real_h = 1200,max_w = 1600,max_h =1200
[KERNEL] [ 1.905380] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 2...
[KERNEL] [ 1.905808] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 1...
[KERNEL] [ 1.906234] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 0...
[KERNEL] [ 1.906276] ov2659_front_4(rk_cam_sensor:163): write reg(0x103, val:0x1) failed, try to write again!
[KERNEL] [ 1.906714] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 2...
[KERNEL] [ 1.907140] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 1...
[KERNEL] [ 1.907566] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 0...
[KERNEL] [ 1.907607] ov2659_front_4(rk_cam_sensor:163): write reg(0x103, val:0x1) failed, try to write again!
[KERNEL] [ 1.908044] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 2...
[KERNEL] [ 1.908470] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 1...
[KERNEL] [ 1.908897] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 0...
[KERNEL] [ 1.908938] ov2659_front_4(rk_cam_sensor:163): write reg(0x103, val:0x1) failed, try to write again!
[KERNEL] [ 1.908989] ov2659_front_4(rk_cam_sensor:379): write array failed!
[KERNEL] [ 1.909017] ov2659_front_4(rk_cam_sensor:685): soft reset failed
[KERNEL] [ 1.909024] 
[KERNEL] [ 1.920251] rk3188 lcdc1 clk disable...
[KERNEL] [ 1.920275] lcdc1 win0 closed,atv layer:0
[KERNEL] [ 1.925151] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 2...
[KERNEL] [ 1.925693] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 1...
[KERNEL] [ 1.926233] i2c i2c-3: No ack, Maybe slave(addr: 0x30) not exist or abnormal power-on, retry 0...
[KERNEL] [ 1.926279] ov2659_front_4(rk_cam_sensor:329): read reg(0x300a val:0x0) failed, try to read again!
[KERNEL] [ 1.926333] ov2659_front_4(rk_cam_sensor:712): read chip id failed
[KERNEL] [ 1.926444] ret: 0
[KERNEL] [ 1.954674] camera 33-1-ov2659_front_4: Probe ov2659_front_4 failed
[KERNEL] [ 2.055185] usb 2-1: New USB device found, idVendor=1a40, idProduct=0101
[KERNEL] [ 2.055223] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[KERNEL] [ 2.055259] usb 2-1: Product: USB 2.0 Hub [MTT]
[KERNEL] [ 2.055621] hub 2-1:1.0: USB hub found
[KERNEL] [ 2.055806] hub 2-1:1.0: 4 ports detected
[KERNEL] [ 2.065973] gBootMedia = 1 gSdmmcFwPartOffset =0!
[KERNEL] [ 2.066000] rknand_buffer.c version: 4.40 20130830!
[KERNEL] [ 2.066175] 11 cmdlinepart partitions found on MTD device rk29xxnand
[KERNEL] [ 2.066211] Creating 11 MTD partitions on "rk29xxnand":
[KERNEL] [ 2.066242] 0x000000400000-0x000000800000 : "misc"
[KERNEL] [ 2.066814] 0x000000800000-0x000001400000 : "kernel"
[KERNEL] [ 2.067309] 0x000001400000-0x000002000000 : "boot"
[KERNEL] [ 2.067757] 0x000002000000-0x000004000000 : "recovery"
[KERNEL] [ 2.068197] 0x000004000000-0x000008000000 : "backup"
[KERNEL] [ 2.068680] 0x000008000000-0x000010000000 : "cache"
[KERNEL] [ 2.069191] 0x000010000000-0x00008f800000 : "userdata"
[KERNEL] [ 2.071029] 0x00008f800000-0x00008fc00000 : "metadata"
[KERNEL] [ 2.071471] 0x00008fc00000-0x000090000000 : "kpanic"
[KERNEL] [ 2.073294] apanic: Bound to mtd partition 'kpanic'
[KERNEL] [ 2.073321] apanic: No panic data available
[KERNEL] [ 2.073347] 0x000090000000-0x0000c0000000 : "system"
[KERNEL] [ 2.074362] 0x0000c0000000-0x0001e1000000 : "user"
[KERNEL] [ 2.099808] EXT4-fs (mtdblock9): mounted filesystem with ordered data mode. Opts: 
[KERNEL] [ 2.107594] 
[KERNEL] [ 2.107611] 
[KERNEL] [ 2.334793] usb 2-1.1: new high speed USB device number 3 using usb20_host
[KERNEL] [ 2.352878] ******** Show Sink Info ********
[KERNEL] [ 2.352902] Support video mode: 
[KERNEL] [ 2.352919] 1920x1080p@60Hz.
[KERNEL] [ 2.352934] 1920x1080p@50Hz.
[KERNEL] [ 2.352948] 1280x720p@60Hz.
[KERNEL] [ 2.352962] 1280x720p@50Hz.
[KERNEL] [ 2.352976] Support audio type: LPCM
[KERNEL] [ 2.352993] Support audio sample rate: 
[KERNEL] [ 2.353013] 32000
[KERNEL] [ 2.353023] 44100
[KERNEL] [ 2.353034] 48000
[KERNEL] [ 2.353044] 96000
[KERNEL] [ 2.353054] Support audio word lenght: 
[KERNEL] [ 2.353072] 16bit
[KERNEL] [ 2.353082] 20bit
[KERNEL] [ 2.353093] 24bit
[KERNEL] [ 2.353103] ******** Show Sink Info ********
[KERNEL] [ 2.353131] rk3188 lcdc1 clk enable...
[KERNEL] [ 2.353156] lcdc1: dclk:148500000>>fps:60 
[KERNEL] [ 2.353178] rk30-lcdc rk30-lcdc.1: rk3188_load_screen for lcdc1 ok!
[KERNEL] [ 2.353209] lcdc1 wakeup from standby!
[KERNEL] [ 2.353228] lcdc1 win0 open,atv layer:1
[KERNEL] [ 2.353261] lcdc1 win1 closed,atv layer:1
[KERNEL] [ 2.435552] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=0179
[KERNEL] [ 2.435588] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[KERNEL] [ 2.435624] usb 2-1.1: Product: 802.11n NIC
[KERNEL] [ 2.435649] usb 2-1.1: Manufacturer: Realtek
[KERNEL] [ 2.435671] usb 2-1.1: SerialNumber: 00880E06DFEF
[KERNEL] [ 2.514794] usb 2-1.2: new low speed USB device number 4 using usb20_host
[KERNEL] [ 2.618676] usb 2-1.2: New USB device found, idVendor=046d, idProduct=c05a
[KERNEL] [ 2.618713] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[KERNEL] [ 2.618769] usb 2-1.2: Product: USB Optical Mouse
[KERNEL] [ 2.618793] usb 2-1.2: Manufacturer: Logitech
[KERNEL] [ 2.621742] input: Logitech USB Optical Mouse as /devices/platform/usb20_host/usb2/2-1/2-1.2/2-1.2:1.0/input/input2
[KERNEL] [ 2.621900] generic-usb 0003:046D:C05A.0001: input: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-usb20_host-1.2/input0
[KERNEL] [ 2.694668] usb 2-1.3: new low speed USB device number 5 using usb20_host
[KERNEL] [ 2.801563] usb 2-1.3: New USB device found, idVendor=046d, idProduct=c31c
[KERNEL] [ 2.801600] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[KERNEL] [ 2.801641] usb 2-1.3: Product: USB Keyboard
[KERNEL] [ 2.801665] usb 2-1.3: Manufacturer: Logitech
[KERNEL] [ 2.808728] input: Logitech USB Keyboard as /devices/platform/usb20_host/usb2/2-1/2-1.3/2-1.3:1.0/input/input3
[KERNEL] [ 2.808887] generic-usb 0003:046D:C31C.0002: input: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-usb20_host-1.3/input0
[KERNEL] [ 2.818502] input: Logitech USB Keyboard as /devices/platform/usb20_host/usb2/2-1/2-1.3/2-1.3:1.1/input/input4
[KERNEL] [ 2.818655] generic-usb 0003:046D:C31C.0003: input: USB HID v1.10 Device [Logitech USB Keyboard] on usb-usb20_host-1.3/input1
[KERNEL] [ 5.744079] enter func vmac_open...
[KERNEL] [ 5.744152] power on phy
[KERNEL] [ 5.874695] Read the Ethernet MAC address from IDB:00:00:00:00:00:00
[KERNEL] [ 5.874775] eth_mac_from_RANDOM***********:12:83:B8:CE:B7:0
[KERNEL] [ 5.892600] vmac_mii_bus: probed
[KERNEL] [ 5.893272] rk29 vmac rk29 vmac.0: PHY driver [Generic PHY] (mii_bus:phy_addr=0:00, irq=-1)
[KERNEL] [ 5.893562] ADDRCONF(NETDEV_UP): eth0: link is not ready
[KERNEL] [ 7.614321] 
[KERNEL] [ 7.614372] 
[KERNEL] [ 7.884911] PHY: 0:00 - Link is Down
[KERNEL] [ 8.887124] PHY: 0:00 - Link is Up - 100/Full
[KERNEL] [ 8.887380] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[KERNEL] [ 11.308602] enter func vmac_close...
[KERNEL] [ 11.312872] enter func vmac_open...
[KERNEL] [ 11.312931] power on phy
[KERNEL] [ 11.444653] Read the Ethernet MAC address from IDB:30:35:a7:24:1c:71
[KERNEL] [ 11.444749] eth_mac_from_idb***********:30:35:A7:24:1C:71
[KERNEL] [ 11.461870] vmac_mii_bus: probed
[KERNEL] [ 11.462523] rk29 vmac rk29 vmac.0: PHY driver [Generic PHY] (mii_bus:phy_addr=0:00, irq=-1)
[KERNEL] [ 11.462849] ADDRCONF(NETDEV_UP): eth0: link is not ready
[KERNEL] [ 13.454926] PHY: 0:00 - Link is Down
[KERNEL] [ 14.457148] PHY: 0:00 - Link is Up - 100/Full
[KERNEL] [ 14.457391] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[KERNEL] [ 17.264643] DWC_OTG: ********vbus detect*********************************************
[init] Run /sbin/gm.
[init] Ok, PID 106.
[gm] WTware/RK3066 session manager v.5.3.2.
[gm] TFTP: download file Everyone\list.wtc from 192.168.25.118.
[gm] WTware TFTP v.5.3.2.
/--- FILE "/tmp/list.wtc" -----------------------
| #
| # Ñïèñîê ïîäêëþ÷àåìûõ ôàéëîâ.
| #
| # Ýòîò îòäåëüíûé ìåõàíèçì íàñòðîéêè òåðìèíàëîâ ïðåäíàçíà÷åí òîëüêî
| # äëÿ ðó÷íîãî êîíôèãóðèðîâàíèÿ òåðìèíàëîâ. Ãðàôè÷åñêèé êîíôèãóðàòîð
| # íå ÷èòàåò list.wtc, íå ÷èòàåò è íå ïîçâîëÿåò ðåäàêòèðîâàòü ôàéëû
| # èç êàòàëîãà ListIncludes. Ïîýòîìó íåëüçÿ ïûòàòüñÿ íàñòðàèâàòü îäèí
| # è òîò æå òåðìèíàë è êîíôèãóðàòîðîì, è ÷åðåç list.wtc.
| #
| # Ôîðìàò ñòðîêè â ýòîì ôàéëå:
| # 
| # 01.02.03.04.05.06[([èìÿïîëüçîâàòåëÿ@][èìÿòåðìèíàëà])] [ôàéë [ôàéë ...]]] [# êîììåíòàðèé]
| #
| # Ïðèìåðû:
| #
| # 02.03.04.05.06.07 file1
| #
| # Îçíà÷àåò, ÷òî òåðìèíàë ñ ìàê-àäðåñîì 02.03.04.05.06.07 ïðî÷èòàåò
| # ïàðàìåòðû èç ôàéëà ListIncludes/file1.
| #
| #
| # 03.04.05.06.07.08(vasja@) file2
| #
| # Îçíà÷àåò, ÷òî òåðìèíàë ñ ìàê-àäðåñîì 03.04.05.06.07.08 ïðî÷èòàåò
| # ïàðàìåòðû èç ôàéëà ListIncludes/file2 è â îêîøêî "Âõîä â Windows"
| # ïîäñòàâèò èìÿ ïîëüçîâàòåëÿ "vasja".
| #
| #
| # 04.05.06.07.08.09(term5) file6 file7 # Êîìï çàìãëàâáóõà.
| #
| # Îçíà÷àåò, ÷òî òåðìèíàëó ñ ìàê-àäðåñîì 04.05.06.07.08.09 áóäåò
| # ïðèñâîåíî èìÿ term5, àíàëîãè÷íî óêàçàíèþ ïàðàìåòðà clienthostname,
| # è îí ïðî÷èòàåò ïàðàìåòðû èç ôàéëîâ ListIncludes/file6 è
| # ListIncludes/file7.
| #
| #
| # ×òîáû ìîæíî áûëî óêàçûâàòü èìÿ ïîëüçîâàòåëÿ ðóññêèìè áóêâàìè, íàäî
| # îòêðûòü ýòîò ôàéë â Notepad è ñîõðàíèòü ñ Encoding: Unicode.
| #
\----------------------------------------------------
[gm] TFTP: download file Terminals\30.35.A7.24.1C.71\config.wtc from 192.168.25.118.
/--- FILE "/tmp/config.wtc" -----------------------
| background=3373ac, 3a6ea5, 3a6ea5, 3a6ea5
| sound=on
| graphic=f
| connection 
\----------------------------------------------------
[gm] TFTP: download file Everyone\all.wtc from 192.168.25.118.
/--- FILE "/tmp/all.wtc" -----------------------
| server=192.168.25.118
\----------------------------------------------------
[gm] TFTP: download file Everyone\wtware.lic from 192.168.25.118.
[KERNEL] [ 17.656397] EXT4-fs (mtdblock9): re-mounted. Opts: 
/--- FILE "/etc/config.compiled" -----------------------
| [BOM]
| server=192.168.25.118
| background=3373ac, 3a6ea5, 3a6ea5, 3a6ea5
| sound=on
| graphic=f
| connection 
| license_30:35:a7:24:1c:71_full = \
| 1bfdd70e474551e33579dd3a46835a30cca45bb31761f0d18b3ec3bf092de528 \
| 67b8f2b4d734d1f255abbc99691f21e64dccd6ef92688ebb3ac3357706c3ce9c \
| a211a89929fd97e4d64b76428e328491874331d86e8da8f94235b5377cd633cc \
| 1dbbc807c85599c7891421a6668ade5763d74f04fb159dca7dbcd486056e801c
\----------------------------------------------------
[KERNEL] [ 17.666093] EXT4-fs (mtdblock9): re-mounted. Opts: 
[gm] Hostname: "wtw3035A7241C71".
[gm] Add keyboard event4: Logitech USB Keyboard.
[gm] Add keyboard event3: Logitech USB Keyboard.
[gm] EV_REL flag found. Add mouse event2: Logitech USB Optical Mouse.
[gm] Add keyboard event1: rkxx-remotectl.
[gm] Add keyboard event0: rk29-keypad.
[init] Process pid 70 terminated, status 00000000.
RSH: listener is active.
Everyone can control terminal by HTTP.
/--- FILE "/proc/asound/devices" -----------------------
| 0: [ 0] : control
| 16: [ 0- 0]: digital audio playback
| 24: [ 0- 0]: digital audio capture
| 32: [ 1] : control
| 33: : timer
| 48: [ 1- 0]: digital audio playback
\----------------------------------------------------
[gm] /dev/snd/controlC1 character device.
[gm] /dev/snd/pcmC1D0p character device.
[gm] /dev/snd/controlC0 character device.
[gm] /dev/snd/pcmC0D0c character device.
[gm] /dev/snd/pcmC0D0p character device.
[gm] /dev/snd/timer character device.
[gm] Run sound daemon.
[init] Run /sbin/rdpsnd 1 0 100 0 -1.
[init] Ok, PID 110.
[rdpsnd] RDP Sound Redirector, WTware v.5.3.2/RK3066.
[init] Run /sbin/resolver 0xc95f0 dns [192.168.25.118].
[init] Ok, PID 111.
[gm] Nobody can control terminal by VNC.
[rdpsnd] Card 'RK29RK1000'/'RK29_RK1000'.
[rdpsnd] Mixer name: ''.
[rdpsnd] Components: ''.
[rdpsnd] Controls: 3.
[rdpsnd] ALSA: control 'Capture Volume'.
[rdpsnd] ALSA: control 'Capture Switch'.
[rdpsnd] ALSA: control 'PCM Volume'.
[init] Process pid 111 terminated, status 00000000.
[gm] 192.168.25.118 => 192.168.25.118.
[gm] Free ram before fork terminal client /sbin/rdpclient (session 1): 811840 Kb.
[init] Run /sbin/rdpclient 1.
[init] Ok, PID 112.
[rdpclient 112] RDP Terminal Client, WTware v.5.3.2/RK3066, pipe 1, pid 112.
[gm] Failed to set keyboard leds.
[rdpclient 112] Redirect sound.
[rdpclient 112] Make RDP session with 192.168.25.118, port 3389.
[rdpclient 112] No username.
[rdpclient 112] No password.
[rdpclient 112] No PIN.
[rdpclient 112] No domain.
[rdpclient 112] No shell.
[rdpclient 112] No directory.
[rdpclient 112] Window: 1920x1080@16.
[rdpclient 112] PFlags 0x000000AF.
[rdpclient 112] Keyboard 00000409:00000000.
[rdpclient 112] My hostname "wtw3035A7241C71".
[rdpclient 112] TCP: connecting to 192.168.25.118:3389.
[rdpclient 112] TCP: connection with 192.168.25.118:3389 established.
[rdpclient 112] Turn keepalive on.
[rdpclient 112] fstream.cpp ( 1020): Set TCP_USER_TIMEOUT 25000 miliseconds.
[rdpclient 112] Free ram after buffers allocation: 808740 KB.
[gm] /graphic/ppllg.png: 32x38.
[rdpclient 112] Reconnect with CredSSP enabled.
[rdpclient 112] TCP: reconnecting to 192.168.25.118:3389.
[rdpclient 112] TCP: connection with 192.168.25.118:3389 established.
[rdpclient 112] Turn keepalive on.
[rdpclient 112] fstream.cpp ( 1020): Set TCP_USER_TIMEOUT 25000 miliseconds.
[rdpclient 112] CredSSP.
[rdpclient 112] rdpclient-tcp.cpp ( 510): TLS connection: ok.
[rdpclient 112] RDP4 encryption.
[rdpclient 112] SessionId 0x0000000d: FORUM\vp.
[KERNEL] [ 41.338482] i2s dma info:periodsize(1024),limit(128),buffersize(131072),over(0)
[alsa2test] Card 'RK29RK1000'/'RK29_RK1000'.
[alsa2test] Mixer name: ''.
[alsa2test] Components: ''.
[alsa2test] Controls: 3.
[alsa2test] ALSA: control 'Capture Volume'.
[alsa2test] ALSA: control 'Capture Switch'.
[alsa2test] ALSA: control 'PCM Volume'.
[alsa2test] ALSA: use device hw:0,0.
[alsa2test] Force mono -> stereo sound conversion.
[alsa2test] ALSA: Hardware rate 44100Hz.
[alsa2test] ALSA: driver default chunk size 256 too low.
[alsa2test] ALSA: chunk size 4096 frames, 16384 bytes, 92 msec.
[alsa2test] ALSA: buffer size 131072 bytes, 743 miliseconds.
Home   WTware diskless client.

Код: Выделить всё

WTware v.5.2.38

[init] WTware init v.5.2.38/RK3066 (c) 2003-2015 WTware http://www.wtware.com
[init] Run /sbin/loader.
[init] Ok, PID 71.
[loader] WTware/RK3066 loader v.5.2.38.
[loader] [0] partition 'misc'.
[loader] [1] partition 'kernel'.
[loader] [2] partition 'boot'.
[loader] [3] partition 'recovery'.
[loader] [4] partition 'backup'.
[loader] [5] partition 'cache'.
[loader] [6] partition 'metadata'.
[loader] [7] partition 'kpanic'.
[loader] [8] partition 'system'. Store data here.
[loader] [9] partition 'userdata'.
[loader] Loader version 2.13.
[loader] Found WiFi interface wlan0.
[loader] Video mode looks like 1920x1080.
[loader] dhcp: 369 bytes from 192.168.25.120.
00000000:0000015d0000000000110000c0a81978ffffffff00430044015d000002010600 ...].........x.....C.D.]......
00000020:67458b6b0000000000000000c0a819c4c0a81976000000003006622ab3230000 gE.k.............v....0.b*.#..
00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
[loader] dhcp: 369 bytes from 192.168.25.120.
00000000:0000015d0000000000110000c0a81978ffffffff00430044015d000002010600 ...].........x.....C.D.]......
00000020:67458b6b0000000000000000c0a819c4c0a81976000000003006622ab3230000 gE.k.............v....0.b*.#..
00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
[loader] dhcp: server address 192.168.25.120.
[loader] dhcp: 192.168.25.196/255.255.255.0.
[loader] dhcp: default gateway 192.168.25.254.
[loader] dhcp: DNS 192.168.25.120.
[loader] dhcp: DNS 192.168.20.1.
[loader] dhcp: domain forum.local.
[loader] dhcp: TFTP 192.168.25.118.
[loader] dhcp: boot file (067) 5.2.38\wtware.pxe.
[loader] TFTP binary "5.2.38\", configs prefix "", using "\" slash.
[init] Run /sbin/kotenok.
[init] Ok, PID 100.
WTware v.5.2.38/RK3066 supervisor.
Send broadcast WTCU discover.
WTC listener is active.
WTC broadcast listener is active.
HTTPd listener is active.
[KERNEL] [ 0.000000] Initializing cgroup subsys cpu
[KERNEL] [ 0.000000] Linux version 3.0.36+ (wasser@localhost.localdomain) (gcc version 4.7 (GCC) ) #59 SMP PREEMPT Sat Jul 12 18:14:40 CEST 2014
[KERNEL] [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
[KERNEL] [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
[KERNEL] [ 0.000000] Machine: RK30board
[KERNEL] [ 0.000000] ddr size = 1024 M, set ion_reserve_size size to 125829120
[KERNEL] [ 0.000000] memory reserve: Memory(base:0x98800000 size:120M) reserved for 
[KERNEL] [ 0.000000] memory reserve: Memory(base:0x97000000 size:24M) reserved for 
[KERNEL] [ 0.000000] memory reserve: Total reserved 144M
[KERNEL] [ 0.000000] Memory policy: ECC disabled, Data cache writeback
[KERNEL] [ 0.000000] bootconsole [earlycon0] enabled
[KERNEL] [ 0.000000] CPU SRAM: copied sram code from c0ed3000 to fef00100 - fef02098
[KERNEL] [ 0.000000] CPU SRAM: copied sram data from c0ed4f98 to fef02098 - fef029c8
[KERNEL] [ 0.000000] sram_log: @ 0q @ P 1 / ! aB@ 2 `" 2q : 4q 
[KERNEL] [ 0.000000] CLKDATA_MSG: pll_flag = 0x00
[KERNEL] [ 0.000000] hzb test rmii clk get form clkin
[KERNEL] [ 0.000000] CLKDATA_ERR:	can't get a available nume and deno
[KERNEL] [ 0.000000] CLKDATA_ERR:	clk_frac_div can't get rate=48000000,uart0_frac_div
[KERNEL] [ 0.000000] L310 cache controller enabled
[KERNEL] [ 0.000000] l2x0: 16 ways, CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001, Cache size: 524288 B
[KERNEL] [ 0.000000] DDR DEBUG: version 1.00 20131106 
[KERNEL] [ 0.000000] DDR DEBUG: DDR3 Device
[KERNEL] [ 0.000000] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=14 CS=2 Total Capability=1024MB
[KERNEL] [ 0.000000] DDR DEBUG: init success!!! freq=220MHz
[KERNEL] [ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x24, DGSL=0 extra clock, DGPS=270
[KERNEL] [ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x24, DGSL=0 extra clock, DGPS=270
[KERNEL] [ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x24, DGSL=0 extra clock, DGPS=270
[KERNEL] [ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x24, DGSL=0 extra clock, DGPS=270
[KERNEL] [ 0.000000] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
[KERNEL] [ 0.000000] DDR DEBUG: DRV Pull-Up=0xb, DRV Pull-Dwn=0xb
[KERNEL] [ 0.000000] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
[KERNEL] [ 0.000000] On node 0 totalpages: 225280
[KERNEL] [ 0.000000] free_area_init_node: node 0, pgdat c0ed0960, node_mem_map c2790000
[KERNEL] [ 0.000000] Normal zone: 976 pages used for memmap
[KERNEL] [ 0.000000] Normal zone: 0 pages reserved
[KERNEL] [ 0.000000] Normal zone: 123952 pages, LIFO batch:31
[KERNEL] [ 0.000000] HighMem zone: 1072 pages used for memmap
[KERNEL] [ 0.000000] HighMem zone: 99280 pages, LIFO batch:31
[KERNEL] [ 0.000000] PERCPU: Embedded 7 pages/cpu @c2f99000 s7040 r8192 d13440 u32768
[KERNEL] [ 0.000000] pcpu-alloc: s7040 r8192 d13440 u32768 alloc=8*4096
[KERNEL] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[KERNEL] [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 223232
[KERNEL] [ 0.000000] Kernel command line: console=ttyFIQ0 androidboot.console=ttyFIQ0 init=/init initrd=0x62000000,0x00790000 mtdparts=rk29xxnand:0x00002000@0x00002000(misc),0x00006000@0x00004000(kernel),0x00006000@0x0000a000(boot),0x00010000@0x00010000(recovery),0x00020000@0x00020000(backup),0x00040000@0x00040000(cache),0x00002000@0x00080000(metadata),0x00002000@0x00082000(kpanic),0x00180000@0x00084000(system),-@0x00204000(userdata) bootver=2014-03-03#2.13 firmware_ver=4.4.2
[KERNEL] [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[KERNEL] [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[KERNEL] [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[KERNEL] [ 0.000000] allocated 4194304 bytes of page_cgroup
[KERNEL] [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[KERNEL] [ 0.000000] Memory: 880MB = 880MB total
[KERNEL] [ 0.000000] Memory: 858472k/858472k available, 190104k reserved, 401408K highmem
[KERNEL] [ 0.000000] Virtual kernel memory layout:
[KERNEL] [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[KERNEL] [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[KERNEL] [ 0.000000] DMA : 0xff600000 - 0xffe00000 ( 8 MB)
[KERNEL] [ 0.000000] vmalloc : 0xdf000000 - 0xfe800000 ( 504 MB)
[KERNEL] [ 0.000000] lowmem : 0xc0000000 - 0xde800000 ( 488 MB)
[KERNEL] [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[KERNEL] [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[KERNEL] [ 0.000000] .init : 0xc0408000 - 0xc062f000 (2204 kB)
[KERNEL] [ 0.000000] .text : 0xc062f000 - 0xc0e48dfc (8296 kB)
[KERNEL] [ 0.000000] .data : 0xc0e4a000 - 0xc0ed2788 ( 546 kB)
[KERNEL] [ 0.000000] .bss : 0xc0ed6024 - 0xc19889e8 (10955 kB)
[KERNEL] [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[KERNEL] [ 0.000000] Preemptible hierarchical RCU implementation.
[KERNEL] [ 0.000000] NR_IRQS:352
[KERNEL] [ 0.000000] rk30_gpio_init: 128 gpio irqs in 4 banks
[KERNEL] [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[KERNEL] [ 0.000000] rk_timer: version 1.3
[KERNEL] [ 0.003749] Calibrating delay loop (skipped) preset value.. 1583.48 BogoMIPS (lpj=7917420)
[KERNEL] [ 0.012892] pid_max: default: 32768 minimum: 301
[KERNEL] [ 0.018164] Security Framework initialized
[KERNEL] [ 0.022796] Mount-cache hash table entries: 512
[KERNEL] [ 0.028400] Initializing cgroup subsys debug
[KERNEL] [ 0.033164] Initializing cgroup subsys cpuacct
[KERNEL] [ 0.038148] Initializing cgroup subsys memory
[KERNEL] [ 0.043023] Initializing cgroup subsys freezer
[KERNEL] [ 0.047997] CPU: Testing write buffer coherency: ok
[KERNEL] [ 0.134394] CPU1: Booted secondary processor
[KERNEL] [ 0.174386] CPU2: Booted secondary processor
[KERNEL] [ 0.214382] CPU3: Booted secondary processor
[KERNEL] [ 0.214420] Brought up 4 CPUs
[KERNEL] [ 0.232024] SMP: Total of 4 processors activated (6333.93 BogoMIPS).
[KERNEL] [ 0.239433] devtmpfs: initialized
[KERNEL] [ 0.249297] NET: Registered protocol family 16
[KERNEL] [ 0.254384] last_log: 0xde100000 map to 0xdf004000 and copy to 0xc0eda1a0 (version 2.1)
[KERNEL] [ 0.279913] DVFS MSG:	AVS Value(index=0): 123 122 123 123 123 122 123 122 123 122 
[KERNEL] [ 0.298893] lcdc0 is used as external display device contoller!
[KERNEL] [ 0.305521] lcdc1 is used as primary display device controller!
[KERNEL] [ 0.412352] rk29sdk_wifi_bt_gpio_control_init: init finished
[KERNEL] [ 0.420018] console [ttyFIQ0] enabled, bootconsole disabled
[KERNEL] [ 0.429185] Registered FIQ tty driver de035cc0
[KERNEL] [ 0.429816] Loaded driver for PL330 DMAC-1 rk29-pl330
[KERNEL] [ 0.429864] DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[KERNEL] [ 0.430052] Loaded driver for PL330 DMAC-2 rk29-pl330
[KERNEL] [ 0.430097] DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14
[KERNEL] [ 0.461888] bio: create slab at 0
[KERNEL] [ 0.466345] SCSI subsystem initialized
[KERNEL] [ 0.466561] usbcore: registered new interface driver usbfs
[KERNEL] [ 0.466681] usbcore: registered new interface driver hub
[KERNEL] [ 0.480926] usbcore: registered new device driver usb
[KERNEL] [ 0.481204] rk30_i2c rk30_i2c.0: i2c-0: RK30 I2C adapter
[KERNEL] [ 0.481448] rk30_i2c rk30_i2c.1: i2c-1: RK30 I2C adapter
[KERNEL] [ 0.481656] rk30_i2c rk30_i2c.2: i2c-2: RK30 I2C adapter
[KERNEL] [ 0.481812] rk30_i2c rk30_i2c.3: i2c-3: RK30 I2C adapter
[KERNEL] [ 0.482103] rk30_i2c rk30_i2c.4: i2c-4: RK30 I2C adapter
[KERNEL] [ 0.512520] rk30-adc rk30-adc: rk30 adc: driver initialized
[KERNEL] [ 0.512628] RK29 Watchdog Timer, (c) 2011 Rockchip Electronics
[KERNEL] [ 0.512861] rk29-wdt rk29-wdt.0: starting watchdog timer
[KERNEL] [ 0.513125] Advanced Linux Sound Architecture Driver Version 1.0.24.
[KERNEL] [ 0.513591] Bluetooth: Core ver 2.16
[KERNEL] [ 0.513691] NET: Registered protocol family 31
[KERNEL] [ 0.513732] Bluetooth: HCI device and connection manager initialized
[KERNEL] [ 0.513789] Bluetooth: HCI socket layer initialized
[KERNEL] [ 0.513835] Bluetooth: L2CAP socket layer initialized
[KERNEL] [ 0.513894] Bluetooth: SCO socket layer initialized
[KERNEL] [ 0.515003] rk fb probe ok!
[KERNEL] [ 0.519743] act8846_set_init,line=17
[KERNEL] [ 0.519778] act8846_set_init:g_pmic_type=3
[KERNEL] [ 0.521485] act8846_set_init act_dcdc1 =1200000mV end
[KERNEL] [ 0.523278] act8846_set_init vdd_core =1000000mV end
[KERNEL] [ 0.525071] act8846_set_init vdd_cpu =1000000mV end
[KERNEL] [ 0.526862] act8846_set_init act_dcdc4 =3300000mV end
[KERNEL] [ 0.528053] act8846_set_init act_ldo1 =1000000mV end
[KERNEL] [ 0.529741] act8846_set_init act_ldo2 =1200000mV end
[KERNEL] [ 0.531429] act8846_set_init act_ldo3 =1800000mV end
[KERNEL] [ 0.533118] act8846_set_init act_ldo4 =3300000mV end
[KERNEL] [ 0.534811] act8846_set_init act_ldo5 =3300000mV end
[KERNEL] [ 0.536499] act8846_set_init act_ldo6 =3300000mV end
[KERNEL] [ 0.537588] act8846_set_init act_ldo7 =1800000mV end
[KERNEL] [ 0.539274] act8846_set_init act_ldo8 =2800000mV end
[KERNEL] [ 0.539325] act8846_set_init,line=78 END
[KERNEL] [ 0.539397] i2c-core: driver [act8846] using legacy suspend method
[KERNEL] [ 0.539448] i2c-core: driver [act8846] using legacy resume method
[KERNEL] [ 0.539531] rk1000_control_probe
[KERNEL] [ 0.570013] rk1000_control_probe ok
[KERNEL] [ 0.570100] Switching to clocksource rk_timer
[KERNEL] [ 0.573653] Switched to NOHz mode on CPU #0
[KERNEL] [ 0.574426] Switched to NOHz mode on CPU #3
[KERNEL] [ 0.574444] Switched to NOHz mode on CPU #2
[KERNEL] [ 0.574459] Switched to NOHz mode on CPU #1
[KERNEL] [ 0.577880] lcdc1:reg_phy_base = 0x1010e000,reg_vir_base:0xdf0ac000
[KERNEL] [ 0.577984] fb0:win0
[KERNEL] [ 0.577989] fb1:win1
[KERNEL] [ 0.577995] fb2:win2
[KERNEL] [ 0.578097] rk3188 lcdc1 clk enable...
[KERNEL] [ 0.603228] rk3188 lcdc1 clk disable...
[KERNEL] [ 0.678783] fb0:phy:97000000>>vir:e0000000>>len:0x1800000
[KERNEL] [ 0.679096] rk_fb_register>>>>>fb0
[KERNEL] [ 0.679439] rk_fb_register>>>>>fb1
[KERNEL] [ 0.711698] cfg80211: Calling CRDA to update world regulatory domain
[KERNEL] [ 0.711819] rk3188 lcdc1 probe ok!
[KERNEL] [ 0.711927] lcdc0:reg_phy_base = 0x1010c000,reg_vir_base:0xdf0c0000
[KERNEL] [ 0.712008] fb0:win0
[KERNEL] [ 0.712014] fb1:win1
[KERNEL] [ 0.712019] fb2:win2
[KERNEL] [ 0.712121] rk3188 lcdc0 clk enable...
[KERNEL] [ 0.737224] rk3188 lcdc0 clk disable...
[KERNEL] [ 0.737266] fb2:phy:97000000>>vir:e0000000>>len:0x1800000
[KERNEL] [ 0.737526] rk_fb_register>>>>>fb2
[KERNEL] [ 0.738183] rk_fb_register>>>>>fb3
[KERNEL] [ 0.738220] rk3188 lcdc0 probe ok!
[KERNEL] [ 0.818256] IT66121 probe success.
[KERNEL] [ 0.821663] NET: Registered protocol family 2
[KERNEL] [ 0.821818] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
[KERNEL] [ 0.822184] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[KERNEL] [ 0.823209] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[KERNEL] [ 0.824673] TCP: Hash tables configured (established 65536 bind 65536)
[KERNEL] [ 0.824727] TCP reno registered
[KERNEL] [ 0.824760] UDP hash table entries: 256 (order: 1, 8192 bytes)
[KERNEL] [ 0.824823] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[KERNEL] [ 0.825142] NET: Registered protocol family 1
[KERNEL] [ 0.873218] RPC: Registered named UNIX socket transport module.
[KERNEL] [ 0.873273] RPC: Registered udp transport module.
[KERNEL] [ 0.873321] RPC: Registered tcp transport module.
[KERNEL] [ 0.873361] RPC: Registered tcp NFSv4.1 backchannel transport module.
[KERNEL] [ 0.873584] Unpacking initramfs...
[KERNEL] [ 1.052577] ******** Show Sink Info ********
[KERNEL] [ 1.052625] Support video mode: 
[KERNEL] [ 1.052673] 1920x1080p@60Hz.
[KERNEL] [ 1.052699] 1920x1080p@50Hz.
[KERNEL] [ 1.052726] 1280x720p@60Hz.
[KERNEL] [ 1.052751] 1280x720p@50Hz.
[KERNEL] [ 1.052776] 720x576p@50Hz.
[KERNEL] [ 1.052800] 720x480p@60Hz.
[KERNEL] [ 1.052825] Support audio type: LPCM
[KERNEL] [ 1.052855] Support audio sample rate: 
[KERNEL] [ 1.052888] 32000
[KERNEL] [ 1.052906] 44100
[KERNEL] [ 1.052924] 48000
[KERNEL] [ 1.052942] 96000
[KERNEL] [ 1.052961] Support audio word lenght: 
[KERNEL] [ 1.052992] 16bit
[KERNEL] [ 1.053011] 20bit
[KERNEL] [ 1.053029] 24bit
[KERNEL] [ 1.053047] ******** Show Sink Info ********
[KERNEL] [ 1.053111] rk3188 lcdc1 clk enable...
[KERNEL] [ 1.053161] lcdc1: dclk:148500000>>fps:60 
[KERNEL] [ 1.053203] rk30-lcdc rk30-lcdc.1: rk3188_load_screen for lcdc1 ok!
[KERNEL] [ 1.053259] lcdc1 wakeup from standby!
[KERNEL] [ 1.053294] lcdc1 win0 open,atv layer:1
[KERNEL] [ 1.053338] lcdc1 win1 closed,atv layer:1
[KERNEL] [ 1.111624] Freeing initrd memory: 7744K
[KERNEL] [ 1.111753] PMU: registered new PMU device of type 0
[KERNEL] [ 1.111895] efuse_version_val: efuse version = 51
[KERNEL] [ 1.111944] DVFS MSG: core: dvfs_adjust_table_lmtvolt get leakage_level = 6000
[KERNEL] [ 1.112010] efuse_version_val: efuse version = 51
[KERNEL] [ 1.112056] DVFS MSG: aclk_gpu: dvfs_adjust_table_lmtvolt get leakage_level = 6000
[KERNEL] [ 1.113233] rk3188 cpufreq version 2.2, suspend freq 816 MHz
[KERNEL] [ 1.113521] vpu: power on
[KERNEL] [ 1.113596] VPU_SERVICE: checking hw id 4831
[KERNEL] [ 1.114108] vpu: power off...done
[KERNEL] [ 1.114170] VPU_SERVICE: init success
[KERNEL] [ 1.114492] audit: initializing netlink socket (disabled)
[KERNEL] [ 1.114572] type=2000 audit(1.050:1): initialized
[KERNEL] [ 1.115125] highmem bounce pool size: 64 pages
[KERNEL] [ 1.115307] ashmem: initialized
[KERNEL] [ 1.121368] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[KERNEL] [ 1.121852] NTFS driver 2.1.30 [Flags: R/W].
[KERNEL] [ 1.122148] fuse init (API version 7.16)
[KERNEL] [ 1.123587] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[KERNEL] [ 1.123660] io scheduler noop registered
[KERNEL] [ 1.123698] io scheduler deadline registered
[KERNEL] [ 1.123797] io scheduler cfq registered (default)
[KERNEL] [ 1.132717] rga: Driver loaded succesfully
[KERNEL] [ 1.132846] rk3188 lcdc0 clk enable...
[KERNEL] [ 1.132892] lcdc0: dclk:148500000>>fps:60 
[KERNEL] [ 1.132933] rk30-lcdc rk30-lcdc.0: rk3188_load_screen for lcdc0 ok!
[KERNEL] [ 1.133900] rk1000_tvout 4-0042: rk1000_tv_control probe error -11
[KERNEL] [ 1.133962] rk1000_tvout: probe of 4-0042 failed with error -22
[KERNEL] [ 1.134182] rk_serial.c v1.6 2013-12-23
[KERNEL] [ 1.134287] rk_serial.0: ttyS0 at MMIO 0x10124000 (irq = 66) is a rk29_serial.0
[KERNEL] [ 1.134473] rk_serial rk_serial.0: membase 0xdf0c8000
[KERNEL] [ 1.134556] rk_serial.3: ttyS3 at MMIO 0x20068000 (irq = 69) is a rk29_serial.3
[KERNEL] [ 1.134712] rk_serial rk_serial.3: membase 0xdf0d0000
[KERNEL] [ 1.134977] Rockchip ion module(version: 1.0) is successfully loaded
[KERNEL] [ 1.137191] loop: module loaded
[KERNEL] [ 1.137253] Android kernel panic handler initialized (bind=kpanic)
[KERNEL] [ 1.138322] rk29 vmac rk29 vmac.0: ARC VMAC at 0x10204000 irq 51 06:f9:c5:f6:f7:db
[KERNEL] [ 1.138422] PPP generic driver version 2.4.2
[KERNEL] [ 1.138589] PPP Deflate Compression module registered
[KERNEL] [ 1.138633] PPP BSD Compression module registered
[KERNEL] [ 1.139342] PPP MPPE Compression module registered
[KERNEL] [ 1.139390] NET: Registered protocol family 24
[KERNEL] [ 1.139432] tun: Universal TUN/TAP device driver, 1.6
[KERNEL] [ 1.139474] tun: (C) 1999-2004 Max Krasnyansky 
[KERNEL] [ 1.139660] Rockchip WiFi SYS interface (V1.00) ... 
[KERNEL] [ 1.139732] Initializing USB Mass Storage driver...
[KERNEL] [ 1.139828] usbcore: registered new interface driver usb-storage
[KERNEL] [ 1.139878] USB Mass Storage support registered.
[KERNEL] [ 1.140017] usbcore: registered new interface driver usbserial
[KERNEL] [ 1.140093] USB Serial support registered for generic
[KERNEL] [ 1.140229] usbcore: registered new interface driver usbserial_generic
[KERNEL] [ 1.140283] usbserial: USB Serial Driver core
[KERNEL] [ 1.140347] USB Serial support registered for GSM modem (1-port)
[KERNEL] [ 1.140431] usbcore: registered new interface driver option
[KERNEL] [ 1.140478] option: v0.7.2:USB Driver for GSM modems
[KERNEL] [ 1.140550] USB Serial support registered for usi-modem
[KERNEL] [ 1.140630] usbcore: registered new interface driver usi-modem
[KERNEL] [ 1.362533] DWC_OTG: ^^^^^^^^^^^^^^^^^^Host Mode
[KERNEL] [ 1.362585] usb20_otg usb20_otg: DWC OTG Controller
[KERNEL] [ 1.362698] usb20_otg usb20_otg: new USB bus registered, assigned bus number 1
[KERNEL] [ 1.362775] usb20_otg usb20_otg: irq 48, io mem 0x00000000
[KERNEL] [ 1.362839] DWC_OTG: Init: Port Power? op_state=1
[KERNEL] [ 1.362875] DWC_OTG: Init: Power Port (0)
[KERNEL] [ 1.362950] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[KERNEL] [ 1.363002] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[KERNEL] [ 1.363057] usb usb1: Product: DWC OTG Controller
[KERNEL] [ 1.363093] usb usb1: Manufacturer: Linux 3.0.36+ dwc_otg_hcd
[KERNEL] [ 1.363137] usb usb1: SerialNumber: usb20_otg
[KERNEL] [ 1.363456] hub 1-0:1.0: USB hub found
[KERNEL] [ 1.363495] hub 1-0:1.0: 1 port detected
[KERNEL] [ 1.366090] DWC_OTG: host20_driver_probe host2.0 reg addr: 0x101c0000 remap:0xdf180000
[KERNEL] [ 1.576586] DWC_OTG: ^^^^^^^^^^^^^^^^^^Host Mode
[KERNEL] [ 1.576633] usb20_host usb20_host: DWC OTG Controller
[KERNEL] [ 1.576736] usb20_host usb20_host: new USB bus registered, assigned bus number 2
[KERNEL] [ 1.576811] usb20_host usb20_host: irq 49, io mem 0x00000000
[KERNEL] [ 1.576889] DWC_OTG: Init: Port Power? op_state=1
[KERNEL] [ 1.576925] DWC_OTG: Init: Power Port (0)
[KERNEL] [ 1.576993] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[KERNEL] [ 1.577045] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[KERNEL] [ 1.577099] usb usb2: Product: DWC OTG Controller
[KERNEL] [ 1.577135] usb usb2: Manufacturer: Linux 3.0.36+ host20_hcd
[KERNEL] [ 1.577178] usb usb2: SerialNumber: usb20_host
[KERNEL] [ 1.577480] hub 2-0:1.0: USB hub found
[KERNEL] [ 1.577515] hub 2-0:1.0: 1 port detected
[KERNEL] [ 1.577894] DWC_OTG: Mode Mismatch Interrupt: currently in Host mode
[KERNEL] [ 1.650593] android_usb gadget: Mass Storage Function, version: 2009/09/11
[KERNEL] [ 1.650654] android_usb gadget: Number of LUNs=2
[KERNEL] [ 1.650695] lun0: LUN: removable file: (no medium)
[KERNEL] [ 1.650734] lun1: LUN: removable file: (no medium)
[KERNEL] [ 1.650967] android_usb gadget: android_usb ready
[KERNEL] [ 1.651166] input: rk29-keypad as /devices/platform/rk29-keypad/input/input0
[KERNEL] [ 1.651387] usbcore: registered new interface driver xpad
[KERNEL] [ 1.651600] remotectl probe j=0x0
[KERNEL] [ 1.651628] remotectl probe j=0x1
[KERNEL] [ 1.651654] remotectl probe j=0x2
[KERNEL] [ 1.651681] remotectl probe j=0x3
[KERNEL] [ 1.651708] remotectl probe j=0x4
[KERNEL] [ 1.651733] remotectl probe j=0x5
[KERNEL] [ 1.651759] remotectl probe j=0x6
[KERNEL] [ 1.651873] input: rkxx-remotectl as /devices/platform/rkxx-remotectl/input/input1
[KERNEL] [ 1.654019] rtc_hym8563 1-0051: clock/calendar information is no longer guaranteed
[KERNEL] [ 1.656773] using rtc device, rtc_hym8563, for alarms
[KERNEL] [ 1.656835] rtc_hym8563 1-0051: rtc core: registered rtc_hym8563 as rtc0
[KERNEL] [ 1.656920] i2c /dev entries driver
[KERNEL] [ 1.657407] lirc_dev: IR Remote Control driver registered, major 250 
[KERNEL] [ 1.657458] IR NEC protocol handler initialized
[KERNEL] [ 1.657492] IR RC5(x) protocol handler initialized
[KERNEL] [ 1.657529] IR RC6 protocol handler initialized
[KERNEL] [ 1.657563] IR JVC protocol handler initialized
[KERNEL] [ 1.657597] IR Sony protocol handler initialized
[KERNEL] [ 1.657632] IR RC5 (streamzap) protocol handler initialized
[KERNEL] [ 1.657673] IR LIRC bridge handler initialized
[KERNEL] [ 1.657706] Linux video capture interface: v2.00
[KERNEL] [ 1.657802] usbcore: registered new interface driver uvcvideo
[KERNEL] [ 1.657846] USB Video Class driver (v1.1.0)
[KERNEL] [ 1.657906] def_ref_volt: 1800mV, curr_ref_volt: 1800mV
[KERNEL] [ 1.658518] device-mapper: uevent: version 1.0.3
[KERNEL] [ 1.658747] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[KERNEL] [ 1.658941] Bluetooth: HCI UART driver ver 2.2
[KERNEL] [ 1.658978] Bluetooth: HCI H4 protocol initialized
[KERNEL] [ 1.659015] Bluetooth: HCILL protocol initialized
[KERNEL] [ 1.659092] cpuidle: using governor ladder
[KERNEL] [ 1.659125] cpuidle: using governor menu
[KERNEL] [ 1.704699] 
[KERNEL] [ 1.704702] drivers/mmc/core/core.c...2015.. ===== mmc_rescan Begin....[mmc0]
[KERNEL] [ 1.704766] 
[KERNEL] [ 1.704769] =================
[KERNEL] [ 1.704774] sdmmc_rescan..2022.. ====find no SDMMC host. [mmc0]
[KERNEL] [ 1.704861] .Line4005..The End of SDMMC-probe Ver.6.07 The last modify date is 2013-12-20. [sd_mmc]
[KERNEL] [ 1.705047] 
[KERNEL] [ 1.705050] drivers/mmc/core/core.c...2015.. ===== mmc_rescan Begin....[mmc1]
[KERNEL] [ 1.705119] .Line4005..The End of SDMMC-probe Ver.6.07 The last modify date is 2013-12-20. [sdio]
[KERNEL] [ 1.705292] Registered led device: ledR
[KERNEL] [ 1.705335] Registered led device: ledW
[KERNEL] [ 1.705377] Registered led device: it66121
[KERNEL] [ 1.705420] Registered led device: cvbs
[KERNEL] [ 1.706525] usbcore: registered new interface driver usbhid
[KERNEL] [ 1.706568] usbhid: USB HID core driver
[KERNEL] [ 1.706895] logger: created 256K log 'log_main'
[KERNEL] [ 1.706974] logger: created 256K log 'log_events'
[KERNEL] [ 1.707052] logger: created 256K log 'log_radio'
[KERNEL] [ 1.707127] logger: created 256K log 'log_system'
[KERNEL] [ 1.707434] zram: Created 1 device(s) ...
[KERNEL] [ 1.707873] i2c-core: driver [RK1000_CODEC] using legacy suspend method
[KERNEL] [ 1.707921] i2c-core: driver [RK1000_CODEC] using legacy resume method
[KERNEL] [ 1.728330] rk29_sdmmc_change_clk_div..1681.. newDiv=42, newCLK=294Khz [sdio]
[KERNEL] [ 1.862451] register rk1000 codec earlysuspend ok
[KERNEL] [ 1.862499] RK1000_CODEC 4-0060: Failed to add route Left DAC->Left Mixer
[KERNEL] [ 1.869122] asoc: rk1000_codec <-> rk29_i2s.1 mapping ok
[KERNEL] [ 1.869485] ALSA device list:
[KERNEL] [ 1.869510] #0: RK29_RK1000
[KERNEL] [ 1.869651] GACT probability NOT on
[KERNEL] [ 1.869687] Mirror/redirect action on
[KERNEL] [ 1.869717] u32 classifier
[KERNEL] [ 1.869735] Actions configured
[KERNEL] [ 1.869761] Netfilter messages via NETLINK v0.30.
[KERNEL] [ 1.869868] nf_conntrack version 0.5.0 (13534 buckets, 54136 max)
[KERNEL] [ 1.870222] ctnetlink v0.93: registering with nfnetlink.
[KERNEL] [ 1.870294] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[KERNEL] [ 1.870338] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[KERNEL] [ 1.870648] xt_time: kernel timezone is -0000
[KERNEL] [ 1.870832] ip_tables: (C) 2000-2006 Netfilter Core Team
[KERNEL] [ 1.871009] arp_tables: (C) 2002 David S. Miller
[KERNEL] [ 1.871087] TCP cubic registered
[KERNEL] [ 1.871113] Initializing XFRM netlink socket
[KERNEL] [ 1.871510] NET: Registered protocol family 10
[KERNEL] [ 1.872192] Mobile IPv6
[KERNEL] [ 1.872235] ip6_tables: (C) 2000-2006 Netfilter Core Team
[KERNEL] [ 1.872385] IPv6 over IPv4 tunneling driver
[KERNEL] [ 1.873031] NET: Registered protocol family 17
[KERNEL] [ 1.873087] NET: Registered protocol family 15
[KERNEL] [ 1.900321] Bluetooth: RFCOMM TTY layer initialized
[KERNEL] [ 1.900370] Bluetooth: RFCOMM socket layer initialized
[KERNEL] [ 1.900409] Bluetooth: RFCOMM ver 1.11
[KERNEL] [ 1.900440] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[KERNEL] [ 1.900482] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[KERNEL] [ 1.900680] NET: Registered protocol family 35
[KERNEL] [ 1.900812] [BT_RFKILL]: Enter rfkill_rk_init
[KERNEL] [ 1.900933] [BT_RFKILL]: Request irq for bt wakeup host
[KERNEL] [ 1.900987] [BT_RFKILL]: ** disable irq
[KERNEL] [ 1.930201] [BT_RFKILL]: bt shut off power
[KERNEL] [ 1.960206] usb 2-1: new high speed USB device number 2 using usb20_host
[KERNEL] [ 1.960277] [BT_RFKILL]: bt_default device registered.
[KERNEL] [ 1.960382] Registering the dns_resolver key type
[KERNEL] [ 1.960440] pmic set pm_suspend_volt:
[KERNEL] [ 1.960476] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[KERNEL] [ 1.960549] Registering SWP/SWPB emulation handler
[KERNEL] [ 1.960729] usb detect inited by board_usb_detect_init, disable detect by bvalid irq
[KERNEL] [ 2.086541] ddrfreq: verion 3.2 20131126
[KERNEL] [ 2.086580] ddrfreq: fix cpu pause bug
[KERNEL] [ 2.086606] ddrfreq: normal 720MHz video 0MHz video_low 0MHz dualview 0MHz idle 0MHz suspend 0MHz reboot 220MHz
[KERNEL] [ 2.087496] ddrfreq: change freq to 720 MHz when normal
[KERNEL] [ 2.087802] 
[KERNEL] [ 2.087811] =======================================================
[KERNEL] [ 2.087833] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====
[KERNEL] [ 2.087854] =======================================================
[KERNEL] [ 2.087876] Realtek 8188EU USB WiFi driver (Powered by Rockchip,Ver 3.41.WFD) init.
[KERNEL] [ 2.087903] wifi_deactivate_usb
[KERNEL] [ 2.087916] rk29sdk_wifi_power: 0
[KERNEL] [ 2.170759] usb 2-1: New USB device found, idVendor=1a40, idProduct=0101
[KERNEL] [ 2.170787] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[KERNEL] [ 2.170815] usb 2-1: Product: USB 2.0 Hub [MTT]
[KERNEL] [ 2.171079] hub 2-1:1.0: USB hub found
[KERNEL] [ 2.171254] hub 2-1:1.0: 4 ports detected
[KERNEL] [ 2.289836] wifi shut off power
[KERNEL] [ 2.450450] usb 2-1.1: new high speed USB device number 3 using usb20_host
[KERNEL] [ 2.520268] wifi_activate_usb
[KERNEL] [ 2.520319] rk29sdk_wifi_power: 1
[KERNEL] [ 2.551252] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=0179
[KERNEL] [ 2.551280] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[KERNEL] [ 2.551313] usb 2-1.1: Product: 802.11n NIC
[KERNEL] [ 2.551329] usb 2-1.1: Manufacturer: Realtek
[KERNEL] [ 2.551348] usb 2-1.1: SerialNumber: 006E0E054E4B
[KERNEL] [ 2.630250] usb 2-1.2: new low speed USB device number 4 using usb20_host
[KERNEL] [ 2.734122] usb 2-1.2: New USB device found, idVendor=046d, idProduct=c05a
[KERNEL] [ 2.734153] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[KERNEL] [ 2.734199] usb 2-1.2: Product: USB Optical Mouse
[KERNEL] [ 2.734220] usb 2-1.2: Manufacturer: Logitech
[KERNEL] [ 2.736968] input: Logitech USB Optical Mouse as /devices/platform/usb20_host/usb2/2-1/2-1.2/2-1.2:1.0/input/input2
[KERNEL] [ 2.737149] generic-usb 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-usb20_host-1.2/input0
[KERNEL] [ 2.784080] wifi turn on power
[KERNEL] [ 2.810393] usb 2-1.3: new low speed USB device number 5 using usb20_host
[KERNEL] [ 2.890181] RTL871X: module init start
[KERNEL] [ 2.890200] RTL871X: rtl8188eu v4.3.0_10600.20140220
[KERNEL] [ 2.890233] RTL871X: build time: Jul 12 2014 18:11:53
[KERNEL] [ 2.895004] bFWReady == _FALSE call reset 8051...
[KERNEL] [ 2.916396] usb 2-1.3: New USB device found, idVendor=046d, idProduct=c31c
[KERNEL] [ 2.916427] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[KERNEL] [ 2.916463] usb 2-1.3: Product: USB Keyboard
[KERNEL] [ 2.916484] usb 2-1.3: Manufacturer: Logitech
[KERNEL] [ 2.923352] input: Logitech USB Keyboard as /devices/platform/usb20_host/usb2/2-1/2-1.3/2-1.3:1.0/input/input3
[KERNEL] [ 2.923648] generic-usb 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-usb20_host-1.3/input0
[KERNEL] [ 2.925582] RTL871X: rtw_ndev_init(wlan0)
[KERNEL] [ 2.927103] RTL871X: rtw_ndev_init(p2p0)
[KERNEL] [ 2.928342] usbcore: registered new interface driver rtl8188eu
[KERNEL] [ 2.928372] RTL871X: module init ret=0
[KERNEL] [ 2.929068] rtc_hym8563 1-0051: setting system clock to 2011-01-01 12:00:01 UTC (1293883201)
[KERNEL] [ 2.933335] input: Logitech USB Keyboard as /devices/platform/usb20_host/usb2/2-1/2-1.3/2-1.3:1.1/input/input4
[KERNEL] [ 2.933541] generic-usb 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-usb20_host-1.3/input1
[KERNEL] [ 2.935379] asoc: dit-hifi <-> rk-spdif mapping ok
[KERNEL] [ 2.935797] usbcore: registered new interface driver snd-usb-audio
[KERNEL] [ 2.936088] Freeing init memory: 2204K
[KERNEL] [ 3.035890] gp_rknand_info = : 0xdd8cc800
[KERNEL] [ 3.039973] rk30_chip_set:1 
[KERNEL] [ 3.042904] FtlInit!
[KERNEL] [ 3.045116] No.1 FLASH ID:98 de 84 93 72 57
[KERNEL] [ 3.050994] FTL version: 5.0.12 20140214
[KERNEL] [ 3.197608] gBootMedia = 1 gSdmmcFwPartOffset =0!
[KERNEL] [ 3.202328] rknand_buffer.c version: 4.40 20130830!
[KERNEL] [ 3.207327] 10 cmdlinepart partitions found on MTD device rk29xxnand
[KERNEL] [ 3.210199] Creating 10 MTD partitions on "rk29xxnand":
[KERNEL] [ 3.210226] 0x000000400000-0x000000800000 : "misc"
[KERNEL] [ 3.210701] 0x000000800000-0x000001400000 : "kernel"
[KERNEL] [ 3.228794] 0x000001400000-0x000002000000 : "boot"
[KERNEL] [ 3.233773] 0x000002000000-0x000004000000 : "recovery"
[KERNEL] [ 3.239083] 0x000004000000-0x000008000000 : "backup"
[KERNEL] [ 3.244228] 0x000008000000-0x000010000000 : "cache"
[KERNEL] [ 3.249281] 0x000010000000-0x000010400000 : "metadata"
[KERNEL] [ 3.254610] 0x000010400000-0x000010800000 : "kpanic"
[KERNEL] [ 3.260527] apanic: Bound to mtd partition 'kpanic'
[KERNEL] [ 3.260548] apanic: No panic data available
[KERNEL] [ 3.260575] 0x000010800000-0x000040800000 : "system"
[KERNEL] [ 3.274699] 0x000040800000-0x0001e1000000 : "userdata"
[KERNEL] [ 3.290541] EXT4-fs (mtdblock8): mounted filesystem with ordered data mode. Opts: 
[KERNEL] [ 3.297303] 
[KERNEL] [ 3.297315] 
[KERNEL] [ 6.485415] enter func vmac_open...
[KERNEL] [ 6.485480] power on phy
[KERNEL] [ 6.620207] Read the Ethernet MAC address from IDB:00:00:00:00:00:00
[KERNEL] [ 6.620254] eth_mac_from_RANDOM***********:6:F9:C5:F6:F7:0
[KERNEL] [ 6.640579] vmac_mii_bus: probed
[KERNEL] [ 6.641629] rk29 vmac rk29 vmac.0: PHY driver [Generic PHY] (mii_bus:phy_addr=0:00, irq=-1)
[KERNEL] [ 6.642015] ADDRCONF(NETDEV_UP): eth0: link is not ready
[KERNEL] [ 8.309130] 
[KERNEL] [ 8.309177] 
[KERNEL] [ 8.640445] PHY: 0:00 - Link is Down
[KERNEL] [ 9.642658] PHY: 0:00 - Link is Up - 100/Full
[KERNEL] [ 9.642825] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[KERNEL] [ 11.664594] enter func vmac_close...
[KERNEL] [ 11.668399] enter func vmac_open...
[KERNEL] [ 11.668443] power on phy
[KERNEL] [ 11.800231] Read the Ethernet MAC address from IDB:30:06:62:2a:b3:23
[KERNEL] [ 11.800290] eth_mac_from_idb***********:30:6:62:2A:B3:23
[KERNEL] [ 11.817786] vmac_mii_bus: probed
[KERNEL] [ 11.818487] rk29 vmac rk29 vmac.0: PHY driver [Generic PHY] (mii_bus:phy_addr=0:00, irq=-1)
[KERNEL] [ 11.818919] ADDRCONF(NETDEV_UP): eth0: link is not ready
[KERNEL] [ 13.810611] PHY: 0:00 - Link is Down
[KERNEL] [ 14.812817] PHY: 0:00 - Link is Up - 100/Full
[KERNEL] [ 14.813838] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[init] Run /sbin/gm.
[init] Ok, PID 101.
[gm] WTware/RK3066 session manager v.5.2.38.
[gm] TFTP: download file Everyone\list.wtc from 192.168.25.118.
[gm] WTware TFTP v.5.2.38.
/--- FILE "/tmp/list.wtc" -----------------------
| #
| # Ñïèñîê ïîäêëþ÷àåìûõ ôàéëîâ.
| #
| # Ýòîò îòäåëüíûé ìåõàíèçì íàñòðîéêè òåðìèíàëîâ ïðåäíàçíà÷åí òîëüêî
| # äëÿ ðó÷íîãî êîíôèãóðèðîâàíèÿ òåðìèíàëîâ. Ãðàôè÷åñêèé êîíôèãóðàòîð
| # íå ÷èòàåò list.wtc, íå ÷èòàåò è íå ïîçâîëÿåò ðåäàêòèðîâàòü ôàéëû
| # èç êàòàëîãà ListIncludes. Ïîýòîìó íåëüçÿ ïûòàòüñÿ íàñòðàèâàòü îäèí
| # è òîò æå òåðìèíàë è êîíôèãóðàòîðîì, è ÷åðåç list.wtc.
| #
| # Ôîðìàò ñòðîêè â ýòîì ôàéëå:
| # 
| # 01.02.03.04.05.06[([èìÿïîëüçîâàòåëÿ@][èìÿòåðìèíàëà])] [ôàéë [ôàéë ...]]] [# êîììåíòàðèé]
| #
| # Ïðèìåðû:
| #
| # 02.03.04.05.06.07 file1
| #
| # Îçíà÷àåò, ÷òî òåðìèíàë ñ ìàê-àäðåñîì 02.03.04.05.06.07 ïðî÷èòàåò
| # ïàðàìåòðû èç ôàéëà ListIncludes/file1.
| #
| #
| # 03.04.05.06.07.08(vasja@) file2
| #
| # Îçíà÷àåò, ÷òî òåðìèíàë ñ ìàê-àäðåñîì 03.04.05.06.07.08 ïðî÷èòàåò
| # ïàðàìåòðû èç ôàéëà ListIncludes/file2 è â îêîøêî "Âõîä â Windows"
| # ïîäñòàâèò èìÿ ïîëüçîâàòåëÿ "vasja".
| #
| #
| # 04.05.06.07.08.09(term5) file6 file7 # Êîìï çàìãëàâáóõà.
| #
| # Îçíà÷àåò, ÷òî òåðìèíàëó ñ ìàê-àäðåñîì 04.05.06.07.08.09 áóäåò
| # ïðèñâîåíî èìÿ term5, àíàëîãè÷íî óêàçàíèþ ïàðàìåòðà clienthostname,
| # è îí ïðî÷èòàåò ïàðàìåòðû èç ôàéëîâ ListIncludes/file6 è
| # ListIncludes/file7.
| #
| #
| # ×òîáû ìîæíî áûëî óêàçûâàòü èìÿ ïîëüçîâàòåëÿ ðóññêèìè áóêâàìè, íàäî
| # îòêðûòü ýòîò ôàéë â Notepad è ñîõðàíèòü ñ Encoding: Unicode.
| #
\----------------------------------------------------
[gm] TFTP: download file Terminals\30.06.62.2A.B3.23\config.wtc from 192.168.25.118.
/--- FILE "/tmp/config.wtc" -----------------------
| user=
| redraw_delay=50
| connect_timeout=30
| graphic=f
| clienthostname=VP_ThinClient
| turnoffmenu=always
| sound_control=hw
| sound=on,hw:0:0
| connection
\----------------------------------------------------
[gm] TFTP: download file Everyone\all.wtc from 192.168.25.118.
/--- FILE "/tmp/all.wtc" -----------------------
| server=192.168.25.118
\----------------------------------------------------
[gm] TFTP: download file Everyone\wtware.lic from 192.168.25.118.
[KERNEL] [ 18.025466] EXT4-fs (mtdblock8): re-mounted. Opts: 
/--- FILE "/etc/config.compiled" -----------------------
| [BOM]
| server=192.168.25.118
| user=
| redraw_delay=50
| connect_timeout=30
| graphic=f
| clienthostname=VP_ThinClient
| turnoffmenu=always
| sound_control=hw
| sound=on,hw:0:0
| connection 
| license_30:06:62:2a:b3:23_full = \
| a94fcd14982aa63d020a44035fc19a8b7a26c452389d9711fe6223731b143fb4 \
| bf195b4252a664d86fb5946c680388fc0a987ec9a165a36e83f2ebc892e39029 \
| 106d0f0e408de0ec1e159593a4c48fbb5510adf30c64131b56e0ca8d3ced4102 \
| edb33d82ab0c77f5369ed292345ebbb59c87485c6927c9127ac038195b1b4c3a
\----------------------------------------------------
[KERNEL] [ 18.031874] EXT4-fs (mtdblock8): re-mounted. Opts: 
[gm] Hostname: "VP_ThinClient".
[gm] Add keyboard event4: Logitech USB Keyboard.
[gm] Add keyboard event3: Logitech USB Keyboard.
[gm] EV_REL flag found. Add mouse event2: Logitech USB Optical Mouse.
[gm] Add keyboard event1: rkxx-remotectl.
[gm] Add keyboard event0: rk29-keypad.
[init] Process pid 71 terminated, status 00000000.
RSH: listener is active.
Everyone can control terminal by HTTP.
/--- FILE "/proc/asound/devices" -----------------------
| 0: [ 0] : control
| 16: [ 0- 0]: digital audio playback
| 24: [ 0- 0]: digital audio capture
| 32: [ 1] : control
| 33: : timer
| 48: [ 1- 0]: digital audio playback
\----------------------------------------------------
[gm] /dev/snd/controlC1 character device.
[gm] /dev/snd/pcmC1D0p character device.
[gm] /dev/snd/controlC0 character device.
[gm] /dev/snd/pcmC0D0c character device.
[gm] /dev/snd/pcmC0D0p character device.
[gm] /dev/snd/timer character device.
[gm] Run sound daemon.
[init] Run /sbin/rdpsnd 1 0 100 0 0.
[init] Ok, PID 103.
[rdpsnd] RDP Sound Redirector, WTware v.5.2.38/RK3066.
[init] Run /sbin/resolver 0xcc858 dns [192.168.25.118].
[init] Ok, PID 104.
[gm] Nobody can control terminal by VNC.
[rdpsnd] Card 'RK29RK1000'/'RK29_RK1000'.
[rdpsnd] Mixer name: ''.
[rdpsnd] Components: ''.
[rdpsnd] Controls: 3.
[rdpsnd] ALSA: control 'Capture Volume'.
[rdpsnd] ALSA: control 'Capture Switch'.
[rdpsnd] ALSA: control 'PCM Volume'.
[init] Process pid 104 terminated, status 00000000.
[gm] 192.168.25.118 => 192.168.25.118.
[gm] Free ram before fork terminal client /sbin/rdpclient (session 1): 818316 Kb.
[init] Run /sbin/rdpclient 1.
[init] Ok, PID 105.
[rdpclient 105] RDP Terminal Client, WTware v.5.2.38/RK3066, pipe 1, pid 105.
[gm] Failed to set keyboard leds.
[rdpclient 105] Redirect sound.
[rdpclient 105] Make RDP session with 192.168.25.118, port 3389.
[rdpclient 105] No username.
[rdpclient 105] No password.
[rdpclient 105] No PIN.
[rdpclient 105] No domain.
[rdpclient 105] No shell.
[rdpclient 105] No directory.
[rdpclient 105] Window: 1920x1080@16.
[rdpclient 105] PFlags 0x000000AF.
[rdpclient 105] Keyboard 00000409:00000000.
[rdpclient 105] My hostname "VP_ThinClient".
[rdpclient 105] TCP: connecting to 192.168.25.118:3389.
[rdpclient 105] TCP: connection with 192.168.25.118:3389 established.
[rdpclient 105] Turn keepalive on.
[rdpclient 105] Free ram after buffers allocation: 814980 KB.
[gm] /graphic/ppllg.png: 32x38.
[rdpclient 105] Reconnect with CredSSP enabled.
[rdpclient 105] TCP: reconnecting to 192.168.25.118:3389.
[rdpclient 105] TCP: connection with 192.168.25.118:3389 established.
[rdpclient 105] Turn keepalive on.
[rdpclient 105] CredSSP.
[rdpclient 105] RDP4 encryption.
[rdpclient 105] SessionId 0x0000000d: FORUM\vp.
Send WTCU discover to 192.168.25.118.
Send WTCU discover to 192.168.25.118.
[alsa2test] Card 'RK29RK1000'/'RK29_RK1000'.
[alsa2test] Mixer name: ''.
[alsa2test] Components: ''.
[alsa2test] Controls: 3.
[alsa2test] ALSA: control 'Capture Volume'.
[alsa2test] ALSA: control 'Capture Switch'.
[alsa2test] ALSA: control 'PCM Volume'.
[alsa2test] ALSA: use device hw:0,0.
[alsa2test] Force mono -> stereo sound conversion.
[alsa2test] ALSA: Hardware rate 44100Hz.
[alsa2test] ALSA: driver default chunk size 256 too low.
[alsa2test] ALSA: chunk size 4096 frames, 16384 bytes, 92 msec.
[alsa2test] ALSA: buffer size 131072 bytes, 743 miliseconds.
Home   WTware diskless client.

Код: Выделить всё

WTware v.5.2.38

[init] WTware init v.5.2.38/RK3066 (c) 2003-2015 WTware http://www.wtware.com
[init] Run /sbin/loader.
[init] Ok, PID 71.
[loader] WTware/RK3066 loader v.5.2.38.
[loader] [0] partition 'misc'.
[loader] [1] partition 'kernel'.
[loader] [2] partition 'boot'.
[loader] [3] partition 'recovery'.
[loader] [4] partition 'backup'.
[loader] [5] partition 'cache'.
[loader] [6] partition 'metadata'.
[loader] [7] partition 'kpanic'.
[loader] [8] partition 'system'. Store data here.
[loader] [9] partition 'userdata'.
[loader] Loader version 2.13.
[loader] Found WiFi interface wlan0.
[loader] Video mode looks like 1920x1080.
[loader] dhcp: 369 bytes from 192.168.25.120.
00000000:0000015d0000000000110000c0a81978ffffffff00430044015d000002010600 ...].........x.....C.D.]......
00000020:67458b6b0000000000000000c0a819c4c0a81976000000003006622ab3230000 gE.k.............v....0.b*.#..
00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
[loader] dhcp: 369 bytes from 192.168.25.120.
00000000:0000015d0000000000110000c0a81978ffffffff00430044015d000002010600 ...].........x.....C.D.]......
00000020:67458b6b0000000000000000c0a819c4c0a81976000000003006622ab3230000 gE.k.............v....0.b*.#..
00000040:0000000000000000000000000000000000000000000000000000000000000000 ................................
00000060:0000000000000000000000000000000000000000000000000000000000000000 ................................
[loader] dhcp: server address 192.168.25.120.
[loader] dhcp: 192.168.25.196/255.255.255.0.
[loader] dhcp: default gateway 192.168.25.254.
[loader] dhcp: DNS 192.168.25.120.
[loader] dhcp: DNS 192.168.20.1.
[loader] dhcp: domain forum.local.
[loader] dhcp: TFTP 192.168.25.118.
[loader] dhcp: boot file (067) 5.2.38\wtware.pxe.
[loader] TFTP binary "5.2.38\", configs prefix "", using "\" slash.
[init] Run /sbin/kotenok.
[init] Ok, PID 109.
WTware v.5.2.38/RK3066 supervisor.
Send broadcast WTCU discover.
WTC listener is active.
WTC broadcast listener is active.
HTTPd listener is active.
[KERNEL] [ 0.000000] Initializing cgroup subsys cpu
[KERNEL] [ 0.000000] Linux version 3.0.36+ (wasser@localhost.localdomain) (gcc version 4.7 (GCC) ) #59 SMP PREEMPT Sat Jul 12 18:14:40 CEST 2014
[KERNEL] [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
[KERNEL] [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
[KERNEL] [ 0.000000] Machine: RK30board
[KERNEL] [ 0.000000] ddr size = 1024 M, set ion_reserve_size size to 125829120
[KERNEL] [ 0.000000] memory reserve: Memory(base:0x98800000 size:120M) reserved for 
[KERNEL] [ 0.000000] memory reserve: Memory(base:0x97000000 size:24M) reserved for 
[KERNEL] [ 0.000000] memory reserve: Total reserved 144M
[KERNEL] [ 0.000000] Memory policy: ECC disabled, Data cache writeback
[KERNEL] [ 0.000000] bootconsole [earlycon0] enabled
[KERNEL] [ 0.000000] CPU SRAM: copied sram code from c0ed3000 to fef00100 - fef02098
[KERNEL] [ 0.000000] CPU SRAM: copied sram data from c0ed4f98 to fef02098 - fef029c8
[KERNEL] [ 0.000000] sram_log: @ 0q @ P 1 / ! aB@ 2 `" 2q : 4q 
[KERNEL] [ 0.000000] CLKDATA_MSG: pll_flag = 0x00
[KERNEL] [ 0.000000] hzb test rmii clk get form clkin
[KERNEL] [ 0.000000] CLKDATA_ERR:	can't get a available nume and deno
[KERNEL] [ 0.000000] CLKDATA_ERR:	clk_frac_div can't get rate=48000000,uart0_frac_div
[KERNEL] [ 0.000000] L310 cache controller enabled
[KERNEL] [ 0.000000] l2x0: 16 ways, CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001, Cache size: 524288 B
[KERNEL] [ 0.000000] DDR DEBUG: version 1.00 20131106 
[KERNEL] [ 0.000000] DDR DEBUG: DDR3 Device
[KERNEL] [ 0.000000] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=14 CS=2 Total Capability=1024MB
[KERNEL] [ 0.000000] DDR DEBUG: init success!!! freq=220MHz
[KERNEL] [ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x24, DGSL=0 extra clock, DGPS=270
[KERNEL] [ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x24, DGSL=0 extra clock, DGPS=270
[KERNEL] [ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x24, DGSL=0 extra clock, DGPS=270
[KERNEL] [ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x24, DGSL=0 extra clock, DGPS=270
[KERNEL] [ 0.000000] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
[KERNEL] [ 0.000000] DDR DEBUG: DRV Pull-Up=0xb, DRV Pull-Dwn=0xb
[KERNEL] [ 0.000000] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
[KERNEL] [ 0.000000] On node 0 totalpages: 225280
[KERNEL] [ 0.000000] free_area_init_node: node 0, pgdat c0ed0960, node_mem_map c2790000
[KERNEL] [ 0.000000] Normal zone: 976 pages used for memmap
[KERNEL] [ 0.000000] Normal zone: 0 pages reserved
[KERNEL] [ 0.000000] Normal zone: 123952 pages, LIFO batch:31
[KERNEL] [ 0.000000] HighMem zone: 1072 pages used for memmap
[KERNEL] [ 0.000000] HighMem zone: 99280 pages, LIFO batch:31
[KERNEL] [ 0.000000] PERCPU: Embedded 7 pages/cpu @c2f99000 s7040 r8192 d13440 u32768
[KERNEL] [ 0.000000] pcpu-alloc: s7040 r8192 d13440 u32768 alloc=8*4096
[KERNEL] [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[KERNEL] [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 223232
[KERNEL] [ 0.000000] Kernel command line: console=ttyFIQ0 androidboot.console=ttyFIQ0 init=/init initrd=0x62000000,0x00790000 mtdparts=rk29xxnand:0x00002000@0x00002000(misc),0x00006000@0x00004000(kernel),0x00006000@0x0000a000(boot),0x00010000@0x00010000(recovery),0x00020000@0x00020000(backup),0x00040000@0x00040000(cache),0x00002000@0x00080000(metadata),0x00002000@0x00082000(kpanic),0x00180000@0x00084000(system),-@0x00204000(userdata) bootver=2014-03-03#2.13 firmware_ver=4.4.2
[KERNEL] [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[KERNEL] [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[KERNEL] [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[KERNEL] [ 0.000000] allocated 4194304 bytes of page_cgroup
[KERNEL] [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[KERNEL] [ 0.000000] Memory: 880MB = 880MB total
[KERNEL] [ 0.000000] Memory: 858472k/858472k available, 190104k reserved, 401408K highmem
[KERNEL] [ 0.000000] Virtual kernel memory layout:
[KERNEL] [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[KERNEL] [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[KERNEL] [ 0.000000] DMA : 0xff600000 - 0xffe00000 ( 8 MB)
[KERNEL] [ 0.000000] vmalloc : 0xdf000000 - 0xfe800000 ( 504 MB)
[KERNEL] [ 0.000000] lowmem : 0xc0000000 - 0xde800000 ( 488 MB)
[KERNEL] [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[KERNEL] [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[KERNEL] [ 0.000000] .init : 0xc0408000 - 0xc062f000 (2204 kB)
[KERNEL] [ 0.000000] .text : 0xc062f000 - 0xc0e48dfc (8296 kB)
[KERNEL] [ 0.000000] .data : 0xc0e4a000 - 0xc0ed2788 ( 546 kB)
[KERNEL] [ 0.000000] .bss : 0xc0ed6024 - 0xc19889e8 (10955 kB)
[KERNEL] [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[KERNEL] [ 0.000000] Preemptible hierarchical RCU implementation.
[KERNEL] [ 0.000000] NR_IRQS:352
[KERNEL] [ 0.000000] rk30_gpio_init: 128 gpio irqs in 4 banks
[KERNEL] [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[KERNEL] [ 0.000000] rk_timer: version 1.3
[KERNEL] [ 0.003749] Calibrating delay loop (skipped) preset value.. 1583.48 BogoMIPS (lpj=7917420)
[KERNEL] [ 0.012892] pid_max: default: 32768 minimum: 301
[KERNEL] [ 0.018171] Security Framework initialized
[KERNEL] [ 0.022803] Mount-cache hash table entries: 512
[KERNEL] [ 0.028405] Initializing cgroup subsys debug
[KERNEL] [ 0.033168] Initializing cgroup subsys cpuacct
[KERNEL] [ 0.038143] Initializing cgroup subsys memory
[KERNEL] [ 0.043026] Initializing cgroup subsys freezer
[KERNEL] [ 0.048002] CPU: Testing write buffer coherency: ok
[KERNEL] [ 0.134396] CPU1: Booted secondary processor
[KERNEL] [ 0.174387] CPU2: Booted secondary processor
[KERNEL] [ 0.214384] CPU3: Booted secondary processor
[KERNEL] [ 0.214422] Brought up 4 CPUs
[KERNEL] [ 0.232035] SMP: Total of 4 processors activated (6333.93 BogoMIPS).
[KERNEL] [ 0.239443] devtmpfs: initialized
[KERNEL] [ 0.249291] NET: Registered protocol family 16
[KERNEL] [ 0.254372] last_log: 0xde100000 map to 0xdf004000 and copy to 0xc0eda1a0 (version 2.1)
[KERNEL] [ 0.279699] DVFS MSG:	AVS Value(index=0): 123 123 123 123 123 123 123 123 124 123 
[KERNEL] [ 0.298683] lcdc0 is used as external display device contoller!
[KERNEL] [ 0.305320] lcdc1 is used as primary display device controller!
[KERNEL] [ 0.412152] rk29sdk_wifi_bt_gpio_control_init: init finished
[KERNEL] [ 0.419809] console [ttyFIQ0] enabled, bootconsole disabled
[KERNEL] [ 0.428974] Registered FIQ tty driver de035cc0
[KERNEL] [ 0.429606] Loaded driver for PL330 DMAC-1 rk29-pl330
[KERNEL] [ 0.429654] DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[KERNEL] [ 0.429842] Loaded driver for PL330 DMAC-2 rk29-pl330
[KERNEL] [ 0.429888] DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14
[KERNEL] [ 0.461677] bio: create slab at 0
[KERNEL] [ 0.466134] SCSI subsystem initialized
[KERNEL] [ 0.466351] usbcore: registered new interface driver usbfs
[KERNEL] [ 0.466470] usbcore: registered new interface driver hub
[KERNEL] [ 0.480719] usbcore: registered new device driver usb
[KERNEL] [ 0.480992] rk30_i2c rk30_i2c.0: i2c-0: RK30 I2C adapter
[KERNEL] [ 0.481238] rk30_i2c rk30_i2c.1: i2c-1: RK30 I2C adapter
[KERNEL] [ 0.481446] rk30_i2c rk30_i2c.2: i2c-2: RK30 I2C adapter
[KERNEL] [ 0.481598] rk30_i2c rk30_i2c.3: i2c-3: RK30 I2C adapter
[KERNEL] [ 0.481888] rk30_i2c rk30_i2c.4: i2c-4: RK30 I2C adapter
[KERNEL] [ 0.512309] rk30-adc rk30-adc: rk30 adc: driver initialized
[KERNEL] [ 0.512416] RK29 Watchdog Timer, (c) 2011 Rockchip Electronics
[KERNEL] [ 0.512644] rk29-wdt rk29-wdt.0: starting watchdog timer
[KERNEL] [ 0.512902] Advanced Linux Sound Architecture Driver Version 1.0.24.
[KERNEL] [ 0.513367] Bluetooth: Core ver 2.16
[KERNEL] [ 0.513441] NET: Registered protocol family 31
[KERNEL] [ 0.513483] Bluetooth: HCI device and connection manager initialized
[KERNEL] [ 0.513539] Bluetooth: HCI socket layer initialized
[KERNEL] [ 0.513586] Bluetooth: L2CAP socket layer initialized
[KERNEL] [ 0.513664] Bluetooth: SCO socket layer initialized
[KERNEL] [ 0.514788] rk fb probe ok!
[KERNEL] [ 0.519560] act8846_set_init,line=17
[KERNEL] [ 0.519597] act8846_set_init:g_pmic_type=3
[KERNEL] [ 0.521301] act8846_set_init act_dcdc1 =1200000mV end
[KERNEL] [ 0.523095] act8846_set_init vdd_core =1000000mV end
[KERNEL] [ 0.524892] act8846_set_init vdd_cpu =1000000mV end
[KERNEL] [ 0.526682] act8846_set_init act_dcdc4 =3300000mV end
[KERNEL] [ 0.527872] act8846_set_init act_ldo1 =1000000mV end
[KERNEL] [ 0.529560] act8846_set_init act_ldo2 =1200000mV end
[KERNEL] [ 0.531247] act8846_set_init act_ldo3 =1800000mV end
[KERNEL] [ 0.532937] act8846_set_init act_ldo4 =3300000mV end
[KERNEL] [ 0.534630] act8846_set_init act_ldo5 =3300000mV end
[KERNEL] [ 0.536321] act8846_set_init act_ldo6 =3300000mV end
[KERNEL] [ 0.537407] act8846_set_init act_ldo7 =1800000mV end
[KERNEL] [ 0.539094] act8846_set_init act_ldo8 =2800000mV end
[KERNEL] [ 0.539145] act8846_set_init,line=78 END
[KERNEL] [ 0.539218] i2c-core: driver [act8846] using legacy suspend method
[KERNEL] [ 0.539269] i2c-core: driver [act8846] using legacy resume method
[KERNEL] [ 0.539350] rk1000_control_probe
[KERNEL] [ 0.569832] rk1000_control_probe ok
[KERNEL] [ 0.569920] Switching to clocksource rk_timer
[KERNEL] [ 0.573659] Switched to NOHz mode on CPU #0
[KERNEL] [ 0.574432] Switched to NOHz mode on CPU #3
[KERNEL] [ 0.574453] Switched to NOHz mode on CPU #1
[KERNEL] [ 0.574467] Switched to NOHz mode on CPU #2
[KERNEL] [ 0.577691] lcdc1:reg_phy_base = 0x1010e000,reg_vir_base:0xdf0ac000
[KERNEL] [ 0.577790] fb0:win0
[KERNEL] [ 0.577796] fb1:win1
[KERNEL] [ 0.577802] fb2:win2
[KERNEL] [ 0.577904] rk3188 lcdc1 clk enable...
[KERNEL] [ 0.603034] rk3188 lcdc1 clk disable...
[KERNEL] [ 0.678591] fb0:phy:97000000>>vir:e0000000>>len:0x1800000
[KERNEL] [ 0.678903] rk_fb_register>>>>>fb0
[KERNEL] [ 0.679245] rk_fb_register>>>>>fb1
[KERNEL] [ 0.711487] cfg80211: Calling CRDA to update world regulatory domain
[KERNEL] [ 0.711625] rk3188 lcdc1 probe ok!
[KERNEL] [ 0.711731] lcdc0:reg_phy_base = 0x1010c000,reg_vir_base:0xdf0c0000
[KERNEL] [ 0.711812] fb0:win0
[KERNEL] [ 0.711817] fb1:win1
[KERNEL] [ 0.711822] fb2:win2
[KERNEL] [ 0.711924] rk3188 lcdc0 clk enable...
[KERNEL] [ 0.737025] rk3188 lcdc0 clk disable...
[KERNEL] [ 0.737067] fb2:phy:97000000>>vir:e0000000>>len:0x1800000
[KERNEL] [ 0.737324] rk_fb_register>>>>>fb2
[KERNEL] [ 0.737969] rk_fb_register>>>>>fb3
[KERNEL] [ 0.738006] rk3188 lcdc0 probe ok!
[KERNEL] [ 0.818051] IT66121 probe success.
[KERNEL] [ 0.821459] NET: Registered protocol family 2
[KERNEL] [ 0.821613] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
[KERNEL] [ 0.821982] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[KERNEL] [ 0.823006] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[KERNEL] [ 0.824470] TCP: Hash tables configured (established 65536 bind 65536)
[KERNEL] [ 0.824524] TCP reno registered
[KERNEL] [ 0.824558] UDP hash table entries: 256 (order: 1, 8192 bytes)
[KERNEL] [ 0.824622] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[KERNEL] [ 0.824944] NET: Registered protocol family 1
[KERNEL] [ 0.873055] RPC: Registered named UNIX socket transport module.
[KERNEL] [ 0.873111] RPC: Registered udp transport module.
[KERNEL] [ 0.873159] RPC: Registered tcp transport module.
[KERNEL] [ 0.873199] RPC: Registered tcp NFSv4.1 backchannel transport module.
[KERNEL] [ 0.873464] Unpacking initramfs...
[KERNEL] [ 1.052375] ******** Show Sink Info ********
[KERNEL] [ 1.052425] Support video mode: 
[KERNEL] [ 1.052473] 1920x1080p@60Hz.
[KERNEL] [ 1.052499] 1920x1080p@50Hz.
[KERNEL] [ 1.052525] 1280x720p@60Hz.
[KERNEL] [ 1.052550] 1280x720p@50Hz.
[KERNEL] [ 1.052575] 720x576p@50Hz.
[KERNEL] [ 1.052600] 720x480p@60Hz.
[KERNEL] [ 1.052625] Support audio type: LPCM
[KERNEL] [ 1.052655] Support audio sample rate: 
[KERNEL] [ 1.052687] 32000
[KERNEL] [ 1.052705] 44100
[KERNEL] [ 1.052723] 48000
[KERNEL] [ 1.052742] 96000
[KERNEL] [ 1.052760] Support audio word lenght: 
[KERNEL] [ 1.052792] 16bit
[KERNEL] [ 1.052810] 20bit
[KERNEL] [ 1.052828] 24bit
[KERNEL] [ 1.052847] ******** Show Sink Info ********
[KERNEL] [ 1.052910] rk3188 lcdc1 clk enable...
[KERNEL] [ 1.052960] lcdc1: dclk:148500000>>fps:60 
[KERNEL] [ 1.053001] rk30-lcdc rk30-lcdc.1: rk3188_load_screen for lcdc1 ok!
[KERNEL] [ 1.053058] lcdc1 wakeup from standby!
[KERNEL] [ 1.053093] lcdc1 win0 open,atv layer:1
[KERNEL] [ 1.053137] lcdc1 win1 closed,atv layer:1
[KERNEL] [ 1.111502] Freeing initrd memory: 7744K
[KERNEL] [ 1.111629] PMU: registered new PMU device of type 0
[KERNEL] [ 1.111772] efuse_version_val: efuse version = 51
[KERNEL] [ 1.111820] DVFS MSG: core: dvfs_adjust_table_lmtvolt get leakage_level = 6000
[KERNEL] [ 1.111887] efuse_version_val: efuse version = 51
[KERNEL] [ 1.111933] DVFS MSG: aclk_gpu: dvfs_adjust_table_lmtvolt get leakage_level = 6000
[KERNEL] [ 1.113109] rk3188 cpufreq version 2.2, suspend freq 816 MHz
[KERNEL] [ 1.113396] vpu: power on
[KERNEL] [ 1.113471] VPU_SERVICE: checking hw id 4831
[KERNEL] [ 1.113982] vpu: power off...done
[KERNEL] [ 1.114043] VPU_SERVICE: init success
[KERNEL] [ 1.114359] audit: initializing netlink socket (disabled)
[KERNEL] [ 1.114442] type=2000 audit(1.050:1): initialized
[KERNEL] [ 1.114986] highmem bounce pool size: 64 pages
[KERNEL] [ 1.115173] ashmem: initialized
[KERNEL] [ 1.121255] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[KERNEL] [ 1.121737] NTFS driver 2.1.30 [Flags: R/W].
[KERNEL] [ 1.122031] fuse init (API version 7.16)
[KERNEL] [ 1.123503] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[KERNEL] [ 1.123577] io scheduler noop registered
[KERNEL] [ 1.123615] io scheduler deadline registered
[KERNEL] [ 1.123713] io scheduler cfq registered (default)
[KERNEL] [ 1.132783] rga: Driver loaded succesfully
[KERNEL] [ 1.132909] rk3188 lcdc0 clk enable...
[KERNEL] [ 1.132953] lcdc0: dclk:148500000>>fps:60 
[KERNEL] [ 1.132993] rk30-lcdc rk30-lcdc.0: rk3188_load_screen for lcdc0 ok!
[KERNEL] [ 1.133961] rk1000_tvout 4-0042: rk1000_tv_control probe error -11
[KERNEL] [ 1.134022] rk1000_tvout: probe of 4-0042 failed with error -22
[KERNEL] [ 1.134250] rk_serial.c v1.6 2013-12-23
[KERNEL] [ 1.134360] rk_serial.0: ttyS0 at MMIO 0x10124000 (irq = 66) is a rk29_serial.0
[KERNEL] [ 1.134551] rk_serial rk_serial.0: membase 0xdf0c8000
[KERNEL] [ 1.134634] rk_serial.3: ttyS3 at MMIO 0x20068000 (irq = 69) is a rk29_serial.3
[KERNEL] [ 1.134790] rk_serial rk_serial.3: membase 0xdf0d0000
[KERNEL] [ 1.135058] Rockchip ion module(version: 1.0) is successfully loaded
[KERNEL] [ 1.137255] loop: module loaded
[KERNEL] [ 1.137318] Android kernel panic handler initialized (bind=kpanic)
[KERNEL] [ 1.138365] rk29 vmac rk29 vmac.0: ARC VMAC at 0x10204000 irq 51 7a:50:e5:68:e7:32
[KERNEL] [ 1.138467] PPP generic driver version 2.4.2
[KERNEL] [ 1.138644] PPP Deflate Compression module registered
[KERNEL] [ 1.138690] PPP BSD Compression module registered
[KERNEL] [ 1.139403] PPP MPPE Compression module registered
[KERNEL] [ 1.139452] NET: Registered protocol family 24
[KERNEL] [ 1.139495] tun: Universal TUN/TAP device driver, 1.6
[KERNEL] [ 1.139537] tun: (C) 1999-2004 Max Krasnyansky 
[KERNEL] [ 1.139725] Rockchip WiFi SYS interface (V1.00) ... 
[KERNEL] [ 1.139802] Initializing USB Mass Storage driver...
[KERNEL] [ 1.139906] usbcore: registered new interface driver usb-storage
[KERNEL] [ 1.139956] USB Mass Storage support registered.
[KERNEL] [ 1.140147] usbcore: registered new interface driver usbserial
[KERNEL] [ 1.140221] USB Serial support registered for generic
[KERNEL] [ 1.140308] usbcore: registered new interface driver usbserial_generic
[KERNEL] [ 1.140361] usbserial: USB Serial Driver core
[KERNEL] [ 1.140422] USB Serial support registered for GSM modem (1-port)
[KERNEL] [ 1.140508] usbcore: registered new interface driver option
[KERNEL] [ 1.140554] option: v0.7.2:USB Driver for GSM modems
[KERNEL] [ 1.140630] USB Serial support registered for usi-modem
[KERNEL] [ 1.140708] usbcore: registered new interface driver usi-modem
[KERNEL] [ 1.362545] DWC_OTG: ^^^^^^^^^^^^^^^^^^Host Mode
[KERNEL] [ 1.362595] usb20_otg usb20_otg: DWC OTG Controller
[KERNEL] [ 1.362706] usb20_otg usb20_otg: new USB bus registered, assigned bus number 1
[KERNEL] [ 1.362784] usb20_otg usb20_otg: irq 48, io mem 0x00000000
[KERNEL] [ 1.362849] DWC_OTG: Init: Port Power? op_state=1
[KERNEL] [ 1.362886] DWC_OTG: Init: Power Port (0)
[KERNEL] [ 1.362964] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[KERNEL] [ 1.363018] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[KERNEL] [ 1.363072] usb usb1: Product: DWC OTG Controller
[KERNEL] [ 1.363108] usb usb1: Manufacturer: Linux 3.0.36+ dwc_otg_hcd
[KERNEL] [ 1.363152] usb usb1: SerialNumber: usb20_otg
[KERNEL] [ 1.363466] hub 1-0:1.0: USB hub found
[KERNEL] [ 1.363505] hub 1-0:1.0: 1 port detected
[KERNEL] [ 1.366102] DWC_OTG: host20_driver_probe host2.0 reg addr: 0x101c0000 remap:0xdf180000
[KERNEL] [ 1.576600] DWC_OTG: ^^^^^^^^^^^^^^^^^^Host Mode
[KERNEL] [ 1.576649] usb20_host usb20_host: DWC OTG Controller
[KERNEL] [ 1.576751] usb20_host usb20_host: new USB bus registered, assigned bus number 2
[KERNEL] [ 1.576825] usb20_host usb20_host: irq 49, io mem 0x00000000
[KERNEL] [ 1.576902] DWC_OTG: Init: Port Power? op_state=1
[KERNEL] [ 1.576938] DWC_OTG: Init: Power Port (0)
[KERNEL] [ 1.577000] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[KERNEL] [ 1.577053] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[KERNEL] [ 1.577107] usb usb2: Product: DWC OTG Controller
[KERNEL] [ 1.577142] usb usb2: Manufacturer: Linux 3.0.36+ host20_hcd
[KERNEL] [ 1.577185] usb usb2: SerialNumber: usb20_host
[KERNEL] [ 1.577491] hub 2-0:1.0: USB hub found
[KERNEL] [ 1.577527] hub 2-0:1.0: 1 port detected
[KERNEL] [ 1.577903] DWC_OTG: Mode Mismatch Interrupt: currently in Host mode
[KERNEL] [ 1.650606] android_usb gadget: Mass Storage Function, version: 2009/09/11
[KERNEL] [ 1.650661] android_usb gadget: Number of LUNs=2
[KERNEL] [ 1.650703] lun0: LUN: removable file: (no medium)
[KERNEL] [ 1.650742] lun1: LUN: removable file: (no medium)
[KERNEL] [ 1.650977] android_usb gadget: android_usb ready
[KERNEL] [ 1.651175] input: rk29-keypad as /devices/platform/rk29-keypad/input/input0
[KERNEL] [ 1.651402] usbcore: registered new interface driver xpad
[KERNEL] [ 1.651619] remotectl probe j=0x0
[KERNEL] [ 1.651648] remotectl probe j=0x1
[KERNEL] [ 1.651675] remotectl probe j=0x2
[KERNEL] [ 1.651701] remotectl probe j=0x3
[KERNEL] [ 1.651728] remotectl probe j=0x4
[KERNEL] [ 1.651753] remotectl probe j=0x5
[KERNEL] [ 1.651780] remotectl probe j=0x6
[KERNEL] [ 1.651894] input: rkxx-remotectl as /devices/platform/rkxx-remotectl/input/input1
[KERNEL] [ 1.654045] rtc_hym8563 1-0051: clock/calendar information is no longer guaranteed
[KERNEL] [ 1.656799] using rtc device, rtc_hym8563, for alarms
[KERNEL] [ 1.656862] rtc_hym8563 1-0051: rtc core: registered rtc_hym8563 as rtc0
[KERNEL] [ 1.656951] i2c /dev entries driver
[KERNEL] [ 1.657432] lirc_dev: IR Remote Control driver registered, major 250 
[KERNEL] [ 1.657483] IR NEC protocol handler initialized
[KERNEL] [ 1.657517] IR RC5(x) protocol handler initialized
[KERNEL] [ 1.657554] IR RC6 protocol handler initialized
[KERNEL] [ 1.657588] IR JVC protocol handler initialized
[KERNEL] [ 1.657622] IR Sony protocol handler initialized
[KERNEL] [ 1.657657] IR RC5 (streamzap) protocol handler initialized
[KERNEL] [ 1.657698] IR LIRC bridge handler initialized
[KERNEL] [ 1.657731] Linux video capture interface: v2.00
[KERNEL] [ 1.657826] usbcore: registered new interface driver uvcvideo
[KERNEL] [ 1.657870] USB Video Class driver (v1.1.0)
[KERNEL] [ 1.657933] def_ref_volt: 1800mV, curr_ref_volt: 1800mV
[KERNEL] [ 1.658539] device-mapper: uevent: version 1.0.3
[KERNEL] [ 1.658776] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
[KERNEL] [ 1.658975] Bluetooth: HCI UART driver ver 2.2
[KERNEL] [ 1.659013] Bluetooth: HCI H4 protocol initialized
[KERNEL] [ 1.659050] Bluetooth: HCILL protocol initialized
[KERNEL] [ 1.659126] cpuidle: using governor ladder
[KERNEL] [ 1.659159] cpuidle: using governor menu
[KERNEL] [ 1.704712] 
[KERNEL] [ 1.704715] drivers/mmc/core/core.c...2015.. ===== mmc_rescan Begin....[mmc0]
[KERNEL] [ 1.704779] 
[KERNEL] [ 1.704782] =================
[KERNEL] [ 1.704786] sdmmc_rescan..2022.. ====find no SDMMC host. [mmc0]
[KERNEL] [ 1.704876] .Line4005..The End of SDMMC-probe Ver.6.07 The last modify date is 2013-12-20. [sd_mmc]
[KERNEL] [ 1.705078] 
[KERNEL] [ 1.705081] drivers/mmc/core/core.c...2015.. ===== mmc_rescan Begin....[mmc1]
[KERNEL] [ 1.705150] .Line4005..The End of SDMMC-probe Ver.6.07 The last modify date is 2013-12-20. [sdio]
[KERNEL] [ 1.705324] Registered led device: ledR
[KERNEL] [ 1.705368] Registered led device: ledW
[KERNEL] [ 1.705411] Registered led device: it66121
[KERNEL] [ 1.705455] Registered led device: cvbs
[KERNEL] [ 1.706589] usbcore: registered new interface driver usbhid
[KERNEL] [ 1.706633] usbhid: USB HID core driver
[KERNEL] [ 1.706976] logger: created 256K log 'log_main'
[KERNEL] [ 1.707056] logger: created 256K log 'log_events'
[KERNEL] [ 1.707133] logger: created 256K log 'log_radio'
[KERNEL] [ 1.707210] logger: created 256K log 'log_system'
[KERNEL] [ 1.707514] zram: Created 1 device(s) ...
[KERNEL] [ 1.707955] i2c-core: driver [RK1000_CODEC] using legacy suspend method
[KERNEL] [ 1.708005] i2c-core: driver [RK1000_CODEC] using legacy resume method
[KERNEL] [ 1.728420] rk29_sdmmc_change_clk_div..1681.. newDiv=42, newCLK=294Khz [sdio]
[KERNEL] [ 1.862702] register rk1000 codec earlysuspend ok
[KERNEL] [ 1.862750] RK1000_CODEC 4-0060: Failed to add route Left DAC->Left Mixer
[KERNEL] [ 1.869372] asoc: rk1000_codec <-> rk29_i2s.1 mapping ok
[KERNEL] [ 1.869773] ALSA device list:
[KERNEL] [ 1.869796] #0: RK29_RK1000
[KERNEL] [ 1.869923] GACT probability NOT on
[KERNEL] [ 1.869954] Mirror/redirect action on
[KERNEL] [ 1.869981] u32 classifier
[KERNEL] [ 1.870021] Actions configured
[KERNEL] [ 1.870048] Netfilter messages via NETLINK v0.30.
[KERNEL] [ 1.870121] nf_conntrack version 0.5.0 (13534 buckets, 54136 max)
[KERNEL] [ 1.870486] ctnetlink v0.93: registering with nfnetlink.
[KERNEL] [ 1.870566] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[KERNEL] [ 1.870619] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[KERNEL] [ 1.870934] xt_time: kernel timezone is -0000
[KERNEL] [ 1.871120] ip_tables: (C) 2000-2006 Netfilter Core Team
[KERNEL] [ 1.871293] arp_tables: (C) 2002 David S. Miller
[KERNEL] [ 1.871371] TCP cubic registered
[KERNEL] [ 1.871396] Initializing XFRM netlink socket
[KERNEL] [ 1.871791] NET: Registered protocol family 10
[KERNEL] [ 1.872459] Mobile IPv6
[KERNEL] [ 1.872503] ip6_tables: (C) 2000-2006 Netfilter Core Team
[KERNEL] [ 1.872656] IPv6 over IPv4 tunneling driver
[KERNEL] [ 1.873298] NET: Registered protocol family 17
[KERNEL] [ 1.873354] NET: Registered protocol family 15
[KERNEL] [ 1.900151] Bluetooth: RFCOMM TTY layer initialized
[KERNEL] [ 1.900225] Bluetooth: RFCOMM socket layer initialized
[KERNEL] [ 1.900265] Bluetooth: RFCOMM ver 1.11
[KERNEL] [ 1.900296] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[KERNEL] [ 1.900338] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[KERNEL] [ 1.900558] NET: Registered protocol family 35
[KERNEL] [ 1.900686] [BT_RFKILL]: Enter rfkill_rk_init
[KERNEL] [ 1.900806] [BT_RFKILL]: Request irq for bt wakeup host
[KERNEL] [ 1.900861] [BT_RFKILL]: ** disable irq
[KERNEL] [ 1.929996] [BT_RFKILL]: bt shut off power
[KERNEL] [ 1.960016] [BT_RFKILL]: bt_default device registered.
[KERNEL] [ 1.960039] usb 2-1: new high speed USB device number 2 using usb20_host
[KERNEL] [ 1.960229] Registering the dns_resolver key type
[KERNEL] [ 1.960287] pmic set pm_suspend_volt:
[KERNEL] [ 1.960323] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[KERNEL] [ 1.960395] Registering SWP/SWPB emulation handler
[KERNEL] [ 1.960588] usb detect inited by board_usb_detect_init, disable detect by bvalid irq
[KERNEL] [ 2.086371] ddrfreq: verion 3.2 20131126
[KERNEL] [ 2.086401] ddrfreq: fix cpu pause bug
[KERNEL] [ 2.086427] ddrfreq: normal 720MHz video 0MHz video_low 0MHz dualview 0MHz idle 0MHz suspend 0MHz reboot 220MHz
[KERNEL] [ 2.087266] ddrfreq: change freq to 720 MHz when normal
[KERNEL] [ 2.087576] 
[KERNEL] [ 2.087584] =======================================================
[KERNEL] [ 2.087606] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====
[KERNEL] [ 2.087628] =======================================================
[KERNEL] [ 2.087650] Realtek 8188EU USB WiFi driver (Powered by Rockchip,Ver 3.41.WFD) init.
[KERNEL] [ 2.087676] wifi_deactivate_usb
[KERNEL] [ 2.087689] rk29sdk_wifi_power: 0
[KERNEL] [ 2.170529] usb 2-1: New USB device found, idVendor=1a40, idProduct=0101
[KERNEL] [ 2.170558] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[KERNEL] [ 2.170586] usb 2-1: Product: USB 2.0 Hub [MTT]
[KERNEL] [ 2.170871] hub 2-1:1.0: USB hub found
[KERNEL] [ 2.171024] hub 2-1:1.0: 4 ports detected
[KERNEL] [ 2.288892] wifi shut off power
[KERNEL] [ 2.450348] usb 2-1.1: new high speed USB device number 3 using usb20_host
[KERNEL] [ 2.520034] wifi_activate_usb
[KERNEL] [ 2.520059] rk29sdk_wifi_power: 1
[KERNEL] [ 2.550910] usb 2-1.1: New USB device found, idVendor=0bda, idProduct=0179
[KERNEL] [ 2.550958] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[KERNEL] [ 2.551008] usb 2-1.1: Product: 802.11n NIC
[KERNEL] [ 2.551035] usb 2-1.1: Manufacturer: Realtek
[KERNEL] [ 2.551062] usb 2-1.1: SerialNumber: 006E0E054E4B
[KERNEL] [ 2.630156] usb 2-1.2: new low speed USB device number 4 using usb20_host
[KERNEL] [ 2.734164] usb 2-1.2: New USB device found, idVendor=046d, idProduct=c05a
[KERNEL] [ 2.734198] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[KERNEL] [ 2.734238] usb 2-1.2: Product: USB Optical Mouse
[KERNEL] [ 2.734259] usb 2-1.2: Manufacturer: Logitech
[KERNEL] [ 2.737033] input: Logitech USB Optical Mouse as /devices/platform/usb20_host/usb2/2-1/2-1.2/2-1.2:1.0/input/input2
[KERNEL] [ 2.737204] generic-usb 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-usb20_host-1.2/input0
[KERNEL] [ 2.783872] wifi turn on power
[KERNEL] [ 2.810148] usb 2-1.3: new low speed USB device number 5 using usb20_host
[KERNEL] [ 2.890077] RTL871X: module init start
[KERNEL] [ 2.890307] RTL871X: rtl8188eu v4.3.0_10600.20140220
[KERNEL] [ 2.890577] RTL871X: build time: Jul 12 2014 18:11:53
[KERNEL] [ 2.895784] bFWReady == _FALSE call reset 8051...
[KERNEL] [ 2.916802] usb 2-1.3: New USB device found, idVendor=046d, idProduct=c31c
[KERNEL] [ 2.916849] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[KERNEL] [ 2.916905] usb 2-1.3: Product: USB Keyboard
[KERNEL] [ 2.916933] usb 2-1.3: Manufacturer: Logitech
[KERNEL] [ 2.925026] input: Logitech USB Keyboard as /devices/platform/usb20_host/usb2/2-1/2-1.3/2-1.3:1.0/input/input3
[KERNEL] [ 2.925308] generic-usb 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-usb20_host-1.3/input0
[KERNEL] [ 2.935595] input: Logitech USB Keyboard as /devices/platform/usb20_host/usb2/2-1/2-1.3/2-1.3:1.1/input/input4
[KERNEL] [ 2.935866] generic-usb 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-usb20_host-1.3/input1
[KERNEL] [ 2.940218] RTL871X: rtw_ndev_init(wlan0)
[KERNEL] [ 2.941027] RTL871X: rtw_ndev_init(p2p0)
[KERNEL] [ 2.941831] usbcore: registered new interface driver rtl8188eu
[KERNEL] [ 2.941874] RTL871X: module init ret=0
[KERNEL] [ 2.942441] rtc_hym8563 1-0051: setting system clock to 2011-01-01 12:00:01 UTC (1293883201)
[KERNEL] [ 2.945586] asoc: dit-hifi <-> rk-spdif mapping ok
[KERNEL] [ 2.946319] usbcore: registered new interface driver snd-usb-audio
[KERNEL] [ 2.946807] Freeing init memory: 2204K
[KERNEL] [ 3.036732] gp_rknand_info = : 0xdd8cc800
[KERNEL] [ 3.036810] rk30_chip_set:1 
[KERNEL] [ 3.036869] FtlInit!
[KERNEL] [ 3.036895] No.1 FLASH ID:98 de 84 93 72 57
[KERNEL] [ 3.039735] FTL version: 5.0.12 20140214
[KERNEL] [ 3.176926] gBootMedia = 1 gSdmmcFwPartOffset =0!
[KERNEL] [ 3.176949] rknand_buffer.c version: 4.40 20130830!
[KERNEL] [ 3.186571] 10 cmdlinepart partitions found on MTD device rk29xxnand
[KERNEL] [ 3.186599] Creating 10 MTD partitions on "rk29xxnand":
[KERNEL] [ 3.186630] 0x000000400000-0x000000800000 : "misc"
[KERNEL] [ 3.203162] 0x000000800000-0x000001400000 : "kernel"
[KERNEL] [ 3.208368] 0x000001400000-0x000002000000 : "boot"
[KERNEL] [ 3.213483] 0x000002000000-0x000004000000 : "recovery"
[KERNEL] [ 3.218841] 0x000004000000-0x000008000000 : "backup"
[KERNEL] [ 3.224046] 0x000008000000-0x000010000000 : "cache"
[KERNEL] [ 3.229154] 0x000010000000-0x000010400000 : "metadata"
[KERNEL] [ 3.234522] 0x000010400000-0x000010800000 : "kpanic"
[KERNEL] [ 3.240524] apanic: Bound to mtd partition 'kpanic'
[KERNEL] [ 3.240549] apanic: No panic data available
[KERNEL] [ 3.240583] 0x000010800000-0x000040800000 : "system"
[KERNEL] [ 3.254773] 0x000040800000-0x0001e1000000 : "userdata"
[KERNEL] [ 3.271444] EXT4-fs (mtdblock8): mounted filesystem with ordered data mode. Opts: 
[KERNEL] [ 3.279305] 
[KERNEL] [ 3.279325] 
[KERNEL] [ 6.516818] enter func vmac_open...
[KERNEL] [ 6.516880] power on phy
[KERNEL] [ 6.650221] Read the Ethernet MAC address from IDB:00:00:00:00:00:00
[KERNEL] [ 6.650440] eth_mac_from_RANDOM***********:7A:50:E5:68:E7:0
[KERNEL] [ 6.668360] vmac_mii_bus: probed
[KERNEL] [ 6.669094] rk29 vmac rk29 vmac.0: PHY driver [Generic PHY] (mii_bus:phy_addr=0:00, irq=-1)
[KERNEL] [ 6.669476] ADDRCONF(NETDEV_UP): eth0: link is not ready
[KERNEL] [ 7.567710] enter func vmac_close...
[KERNEL] [ 7.730563] enter func vmac_open...
[KERNEL] [ 7.730863] power on phy
[KERNEL] [ 7.870055] Read the Ethernet MAC address from IDB:00:00:00:00:00:00
[KERNEL] [ 7.870113] eth_mac_from_RANDOM***********:7A:50:E5:68:E7:0
[KERNEL] [ 7.888131] vmac_mii_bus: probed
[KERNEL] [ 7.888865] rk29 vmac rk29 vmac.0: PHY driver [Generic PHY] (mii_bus:phy_addr=0:00, irq=-1)
[KERNEL] [ 7.889345] ADDRCONF(NETDEV_UP): eth9: link is not ready
[KERNEL] [ 9.880447] PHY: 0:00 - Link is Down
[KERNEL] [ 10.882557] PHY: 0:00 - Link is Up - 100/Full
[KERNEL] [ 10.882854] ADDRCONF(NETDEV_CHANGE): eth9: link becomes ready
[KERNEL] [ 11.720317] EXT4-fs (mtdblock8): re-mounted. Opts: 
[KERNEL] [ 11.732550] EXT4-fs (mtdblock8): re-mounted. Opts: 
[KERNEL] [ 14.048088] EXT4-fs (mtdblock8): re-mounted. Opts: 
[KERNEL] [ 14.055955] EXT4-fs (mtdblock8): re-mounted. Opts: 
[KERNEL] [ 14.210711] ------------[ cut here ]------------
[KERNEL] [ 14.210818] WARNING: at fs/proc/generic.c:809 remove_proc_entry+0x1bc/0x228()
[KERNEL] [ 14.211019] name 'wlan0'
[KERNEL] [ 14.211106] [] (unwind_backtrace+0x0/0xf8) from [] (warn_slowpath_common+0x4c/0x64)
[KERNEL] [ 14.211327] [] (warn_slowpath_common+0x4c/0x64) from [] (warn_slowpath_fmt+0x30/0x40)
[KERNEL] [ 14.211545] [] (warn_slowpath_fmt+0x30/0x40) from [] (remove_proc_entry+0x1bc/0x228)
[KERNEL] [ 14.211687] [] (remove_proc_entry+0x1bc/0x228) from [] (rtw_adapter_proc_replace+0x7c/0x94)
[KERNEL] [ 14.211964] [] (rtw_adapter_proc_replace+0x7c/0x94) from [] (rtw_ndev_notifier_call+0x5c/0x6c)
[KERNEL] [ 14.212039] [] (rtw_ndev_notifier_call+0x5c/0x6c) from [] (notifier_call_chain+0x44/0x84)
[KERNEL] [ 14.212105] [] (notifier_call_chain+0x44/0x84) from [] (raw_notifier_call_chain+0x18/0x20)
[KERNEL] [ 14.212174] [] (raw_notifier_call_chain+0x18/0x20) from [] (dev_change_name+0x164/0x200)
[KERNEL] [ 14.212238] [] (dev_change_name+0x164/0x200) from [] (dev_ioctl+0x458/0x804)
[KERNEL] [ 14.212299] [] (dev_ioctl+0x458/0x804) from [] (do_vfs_ioctl+0x84/0x5ac)
[KERNEL] [ 14.212356] [] (do_vfs_ioctl+0x84/0x5ac) from [] (sys_ioctl+0x6c/0x7c)
[KERNEL] [ 14.212416] [] (sys_ioctl+0x6c/0x7c) from [] (ret_fast_syscall+0x0/0x30)
[KERNEL] [ 14.212466] ---[ end trace bf13574db00ad282 ]---
[KERNEL] [ 14.212746] enter func vmac_close...
[KERNEL] [ 14.300136] enter func vmac_open...
[KERNEL] [ 14.300180] power on phy
[KERNEL] [ 14.440020] Read the Ethernet MAC address from IDB:00:00:00:00:00:00
[KERNEL] [ 14.440062] eth_mac_from_RANDOM***********:7A:50:E5:68:E7:0
[KERNEL] [ 14.457427] vmac_mii_bus: probed
[KERNEL] [ 14.458082] rk29 vmac rk29 vmac.0: PHY driver [Generic PHY] (mii_bus:phy_addr=0:00, irq=-1)
[KERNEL] [ 14.458323] ADDRCONF(NETDEV_UP): eth0: link is not ready
[KERNEL] [ 16.450294] PHY: 0:00 - Link is Down
[KERNEL] [ 17.452501] PHY: 0:00 - Link is Up - 100/Full
[KERNEL] [ 17.452672] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[KERNEL] [ 19.462999] EXT4-fs (mtdblock8): re-mounted. Opts: 
[KERNEL] [ 19.468551] EXT4-fs (mtdblock8): re-mounted. Opts: 
[KERNEL] [ 23.823272] EXT4-fs (mtdblock8): re-mounted. Opts: 
[KERNEL] [ 23.830903] EXT4-fs (mtdblock8): re-mounted. Opts: 
[KERNEL] [ 37.744064] 
[KERNEL] [ 37.744111] 
[KERNEL] [ 41.094101] enter func vmac_close...
[KERNEL] [ 41.097971] enter func vmac_open...
[KERNEL] [ 41.098020] power on phy
[KERNEL] [ 41.230071] Read the Ethernet MAC address from IDB:30:06:62:2a:b3:23
[KERNEL] [ 41.230204] eth_mac_from_idb***********:30:6:62:2A:B3:23
[KERNEL] [ 41.249357] vmac_mii_bus: probed
[KERNEL] [ 41.250501] rk29 vmac rk29 vmac.0: PHY driver [Generic PHY] (mii_bus:phy_addr=0:00, irq=-1)
[KERNEL] [ 41.251580] ADDRCONF(NETDEV_UP): eth0: link is not ready
[KERNEL] [ 43.250515] PHY: 0:00 - Link is Down
[KERNEL] [ 44.252677] PHY: 0:00 - Link is Up - 100/Full
[KERNEL] [ 44.253426] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[init] Run /sbin/gm.
[init] Ok, PID 110.
[gm] WTware/RK3066 session manager v.5.2.38.
[gm] TFTP: download file Everyone\list.wtc from 192.168.25.118.
[gm] WTware TFTP v.5.2.38.
/--- FILE "/tmp/list.wtc" -----------------------
| #
| # Ñïèñîê ïîäêëþ÷àåìûõ ôàéëîâ.
| #
| # Ýòîò îòäåëüíûé ìåõàíèçì íàñòðîéêè òåðìèíàëîâ ïðåäíàçíà÷åí òîëüêî
| # äëÿ ðó÷íîãî êîíôèãóðèðîâàíèÿ òåðìèíàëîâ. Ãðàôè÷åñêèé êîíôèãóðàòîð
| # íå ÷èòàåò list.wtc, íå ÷èòàåò è íå ïîçâîëÿåò ðåäàêòèðîâàòü ôàéëû
| # èç êàòàëîãà ListIncludes. Ïîýòîìó íåëüçÿ ïûòàòüñÿ íàñòðàèâàòü îäèí
| # è òîò æå òåðìèíàë è êîíôèãóðàòîðîì, è ÷åðåç list.wtc.
| #
| # Ôîðìàò ñòðîêè â ýòîì ôàéëå:
| # 
| # 01.02.03.04.05.06[([èìÿïîëüçîâàòåëÿ@][èìÿòåðìèíàëà])] [ôàéë [ôàéë ...]]] [# êîììåíòàðèé]
| #
| # Ïðèìåðû:
| #
| # 02.03.04.05.06.07 file1
| #
| # Îçíà÷àåò, ÷òî òåðìèíàë ñ ìàê-àäðåñîì 02.03.04.05.06.07 ïðî÷èòàåò
| # ïàðàìåòðû èç ôàéëà ListIncludes/file1.
| #
| #
| # 03.04.05.06.07.08(vasja@) file2
| #
| # Îçíà÷àåò, ÷òî òåðìèíàë ñ ìàê-àäðåñîì 03.04.05.06.07.08 ïðî÷èòàåò
| # ïàðàìåòðû èç ôàéëà ListIncludes/file2 è â îêîøêî "Âõîä â Windows"
| # ïîäñòàâèò èìÿ ïîëüçîâàòåëÿ "vasja".
| #
| #
| # 04.05.06.07.08.09(term5) file6 file7 # Êîìï çàìãëàâáóõà.
| #
| # Îçíà÷àåò, ÷òî òåðìèíàëó ñ ìàê-àäðåñîì 04.05.06.07.08.09 áóäåò
| # ïðèñâîåíî èìÿ term5, àíàëîãè÷íî óêàçàíèþ ïàðàìåòðà clienthostname,
| # è îí ïðî÷èòàåò ïàðàìåòðû èç ôàéëîâ ListIncludes/file6 è
| # ListIncludes/file7.
| #
| #
| # ×òîáû ìîæíî áûëî óêàçûâàòü èìÿ ïîëüçîâàòåëÿ ðóññêèìè áóêâàìè, íàäî
| # îòêðûòü ýòîò ôàéë â Notepad è ñîõðàíèòü ñ Encoding: Unicode.
| #
\----------------------------------------------------
[gm] TFTP: download file Terminals\30.06.62.2A.B3.23\config.wtc from 192.168.25.118.
/--- FILE "/tmp/config.wtc" -----------------------
| user=
| redraw_delay=50
| connect_timeout=30
| graphic=f
| clienthostname=VP_ThinClient
| turnoffmenu=always
| sound_control=sw
| sound=on,hw:0:0
| connection
\----------------------------------------------------
[gm] TFTP: download file Everyone\all.wtc from 192.168.25.118.
/--- FILE "/tmp/all.wtc" -----------------------
| server=192.168.25.118
\----------------------------------------------------
[gm] TFTP: download file Everyone\wtware.lic from 192.168.25.118.
[KERNEL] [ 47.483460] EXT4-fs (mtdblock8): re-mounted. Opts: 
/--- FILE "/etc/config.compiled" -----------------------
| [BOM]
| server=192.168.25.118
| user=
| redraw_delay=50
| connect_timeout=30
| graphic=f
| clienthostname=VP_ThinClient
| turnoffmenu=always
| sound_control=sw
| sound=on,hw:0:0
| connection 
| license_30:06:62:2a:b3:23_full = \
| a94fcd14982aa63d020a44035fc19a8b7a26c452389d9711fe6223731b143fb4 \
| bf195b4252a664d86fb5946c680388fc0a987ec9a165a36e83f2ebc892e39029 \
| 106d0f0e408de0ec1e159593a4c48fbb5510adf30c64131b56e0ca8d3ced4102 \
| edb33d82ab0c77f5369ed292345ebbb59c87485c6927c9127ac038195b1b4c3a
\----------------------------------------------------
[KERNEL] [ 47.491086] EXT4-fs (mtdblock8): re-mounted. Opts: 
[gm] Hostname: "VP_ThinClient".
[gm] Add keyboard event4: Logitech USB Keyboard.
[gm] Add keyboard event3: Logitech USB Keyboard.
[gm] EV_REL flag found. Add mouse event2: Logitech USB Optical Mouse.
[gm] Add keyboard event1: rkxx-remotectl.
[gm] Add keyboard event0: rk29-keypad.
[init] Process pid 71 terminated, status 00000000.
RSH: listener is active.
Everyone can control terminal by HTTP.
/--- FILE "/proc/asound/devices" -----------------------
| 0: [ 0] : control
| 16: [ 0- 0]: digital audio playback
| 24: [ 0- 0]: digital audio capture
| 32: [ 1] : control
| 33: : timer
| 48: [ 1- 0]: digital audio playback
\----------------------------------------------------
[gm] /dev/snd/controlC1 character device.
[gm] /dev/snd/pcmC1D0p character device.
[gm] /dev/snd/controlC0 character device.
[gm] /dev/snd/pcmC0D0c character device.
[gm] /dev/snd/pcmC0D0p character device.
[gm] /dev/snd/timer character device.
[gm] Run sound daemon.
[init] Run /sbin/rdpsnd 0 0 100 0 0.
[init] Ok, PID 111.
[rdpsnd] RDP Sound Redirector, WTware v.5.2.38/RK3066.
[init] Run /sbin/resolver 0xcc858 dns [192.168.25.118].
[init] Ok, PID 112.
[gm] Nobody can control terminal by VNC.
[rdpsnd] Card 'RK29RK1000'/'RK29_RK1000'.
[rdpsnd] Mixer name: ''.
[rdpsnd] Components: ''.
[rdpsnd] Controls: 3.
[rdpsnd] ALSA: control 'Capture Volume'.
[rdpsnd] ALSA: control 'Capture Switch'.
[rdpsnd] ALSA: control 'PCM Volume'.
[init] Process pid 112 terminated, status 00000000.
[gm] 192.168.25.118 => 192.168.25.118.
[gm] Free ram before fork terminal client /sbin/rdpclient (session 1): 818872 Kb.
[init] Run /sbin/rdpclient 1.
[init] Ok, PID 113.
[rdpclient 113] RDP Terminal Client, WTware v.5.2.38/RK3066, pipe 1, pid 113.
[gm] Failed to set keyboard leds.
[rdpclient 113] Redirect sound.
[rdpclient 113] Make RDP session with 192.168.25.118, port 3389.
[rdpclient 113] No username.
[rdpclient 113] No password.
[rdpclient 113] No PIN.
[rdpclient 113] No domain.
[rdpclient 113] No shell.
[rdpclient 113] No directory.
[rdpclient 113] Window: 1920x1080@16.
[rdpclient 113] PFlags 0x000000AF.
[rdpclient 113] Keyboard 00000409:00000000.
[rdpclient 113] My hostname "VP_ThinClient".
[rdpclient 113] TCP: connecting to 192.168.25.118:3389.
[rdpclient 113] TCP: connection with 192.168.25.118:3389 established.
[rdpclient 113] Turn keepalive on.
[rdpclient 113] Free ram after buffers allocation: 815072 KB.
[gm] /graphic/ppllg.png: 32x38.
[rdpclient 113] Reconnect with CredSSP enabled.
[rdpclient 113] TCP: reconnecting to 192.168.25.118:3389.
[rdpclient 113] TCP: connection with 192.168.25.118:3389 established.
[rdpclient 113] Turn keepalive on.
[rdpclient 113] CredSSP.
[rdpclient 113] RDP4 encryption.
[rdpclient 113] SessionId 0x00000009: FORUM\Vp.
kotenok-httpd.cpp ( 1062): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
kotenok-httpd.cpp ( 1125): -- ERROR -- INTERNAL ERROR. Please, contact WTware tech support.
[alsa2test] Card 'RK29RK1000'/'RK29_RK1000'.
[alsa2test] Mixer name: ''.
[alsa2test] Components: ''.
[alsa2test] Controls: 3.
[alsa2test] ALSA: control 'Capture Volume'.
[alsa2test] ALSA: control 'Capture Switch'.
[alsa2test] ALSA: control 'PCM Volume'.
[alsa2test] ALSA: use device hw:0,0.
[alsa2test] Force mono -> stereo sound conversion.
[alsa2test] ALSA: Hardware rate 44100Hz.
[alsa2test] ALSA: driver default chunk size 256 too low.
[alsa2test] ALSA: chunk size 4096 frames, 16384 bytes, 92 msec.
[alsa2test] ALSA: buffer size 131072 bytes, 743 miliseconds.
[rdpclient 113] ERRINFO_DISCONNECTED_BY_OTHERCONNECTION
[rdpsnd] Link lost.
[rdpclient 113] Receive Disconnect Provider Ultimatum.
[rdpclient 113] Удаленный сеанс был отключен, поскольку другой пользователь
подключился к этому сеансу.
[rdpclient 113] Caught signal SIGTERM.
[RDP] close kotopipe (n = 0, errno 2).
[init] Process pid 113 terminated, status 00000000.
[gm] Failed to set keyboard leds.
[gm] Final message: Удаленный сеанс был отключен, поскольку другой пользователь
подключился к этому сеансу.
[gm] /graphic/exlm.png: 44x42.
Home   WTware diskless client.

Код: Выделить всё

encap:Ethernet HWaddr 30:A2:0F:D1:28:DA

Код: Выделить всё

no wireless extensions

Код: Выделить всё

А переходник точно подходящий, внутри не два провода для питания?